It is meaningless anyway.
v2: remove unused variable (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change prepares for a workaround in amdkfd for a GFX9 HW bug. It
requires the control stack memory of compute queues, which is allocated
from the second page of MQD gart BOs, to have mtype NC, rather than
the default UC.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix crash in trace.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These got moved to the new df module so no longer
used in this file.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The UVD firmware doesn't seem to like the HDP flush here.
This worked for years without HDP flush, so just skip it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shadow BO is located on GTT and its parent (PT and PD) BO could located on VRAM.
In some case, the BO on GTT could be evicted but the parent did not. This may
cause the shadow BO not be put in the evict list and could not be invalidate
correctly.
v2: suggested by Christian
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reported-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The callback .emit_reg_write_reg_wait was missing for vcn decode
which resulted in a kernel oops.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
with dpm enabled, need to get active crtcs in dc/no-dc mode.
caused by
'commit ebb649667a31 ("drm/amdgpu: Set pm_display_cfg in non-dc mode")'
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With powerplay enabled, also need to skip fan attributes
if no fan present.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT)
Avoid printing error message for ERESTARTSYS
Originally-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After host os reset gpu reset, need to set flag in_gpu_reset to
zero.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When put the IB test out of exclusive mode, and do sriov reset,
the IB test will randomly fail. As out of exclusive mode it uses
kiq to do read and write registers, but as it has world switch,
the kiq read and write time will be random, sometimes it will
beyond the MAX_KIQ_REG_WAIT and then the read or write register
will fail, which will result the IB test fail.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: use proper register rather than hardcoding.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Directly loaded by VBIOS
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct vga_switcheroo_handler::get_client_id() is defined
as returning an 'enum vga_switcheroo_client_id' but the implementation
in this driver, amdgpu_atpx_get_client_id(), returns an 'int'.
Fix this by returning 'enum vga_switcheroo_client_id' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. support more than 8 values when setting get_pp_dpm_mclk/
sclk/pcie, the former design just parse command format like
"echo xxxx > pp_dpm_sclk" and current can parse "echo xx xxx
xxxx > pp_dpm_sclk" whose operation is more user-friendly
and convinent and can offer more values;
2. be compatible with former design like "xx".
3. add DOC: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
Bug:KFD-385
Signed-off-by: welu <wei.lu2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Enables sg display if vram size <= THRESHOLD(256M); otherwise
still use vram as display buffer.
This patch fixed some potention issues introduced by change
"allow framebuffer in GART memory as well" due to CZ/ST hardware
limitation.
v2: Change default setting to auto.
v3: Move some logic from amdgpu_display_framebuffer_domains()
to pin function, suggested by Christian.
v4: Split into several patches.
v5: Drop module parameter for now.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when user cat pp_od_clk_voltage
add display info about the sclk/mclk/vddc range that user can overdrive
output as:
OD_SCLK:
0: 300MHz 900mV
1: 400MHz 912mV
2: 500MHz 925mV
3: 600MHz 937mV
4: 700MHz 950mV
5: 800MHz 975mV
6: 900MHz 987mV
7: 1000MHz 1000mV
OD_MCLK:
0: 300MHz 900mV
1: 1500MHz 912mV
OD_RANGE:
SCLK: 300MHz 1200MHz
MCLK: 300MHz 1500MHz
VDDC: 700mV 1200mV
also
1. remove unnecessary whitespace before a quoted newline
2. change unit of frequency Mhz to MHz
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sysfs interface for fine grained clock and voltage control.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sysfs file for adjusting power level heuristics.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used for manually masking dpm states.
v2: drop comment about current state (Rex)
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This file is for uploading new powerplay tables.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a legacy file and is only provided for
backwards compatibility.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
