The prints in the test_sockmap programs were only useful when we
didn't have enough control over test infrastructure to know from
user program what was being pushed into kernel side.
Now that we have or will shortly have better test controls lets
remove the printers. This means we can remove half the programs
and cleanup bpf side.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added
as subtest's. The first grow test stays in same form as original shrink
test. The second grow test use the newer bpf_prog_test_run_xattr() calls,
and does extra checking of data contents.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350567.97035.9632611946765811876.stgit@firesoul
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and
bpf_sk_ancestor_cgroup_id helpers from cgroup skb program.
The test creates a testing cgroup, starts a TCPv6 server inside the
cgroup and creates two client sockets: one inside testing cgroup and one
outside.
Then it attaches cgroup skb program to the cgroup that checks all TCP
segments coming to the server and allows only those coming from the
cgroup of the server. If a segment comes from a peer outside of the
cgroup, it'll be dropped.
Finally the test checks that client from inside testing cgroup can
successfully connect to the server, but client outside the cgroup fails
to connect by timeout.
The main goal of the test is to check newly introduced
bpf_sk_{,ancestor_}cgroup_id helpers.
It also checks a couple of socket lookup helpers (tcp & release), but
lookup helpers were introduced much earlier and covered by other tests.
Here it's mostly checked that they can be called from cgroup skb.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
It is sometimes desirable to be able to trigger BPF program from user-space
with minimal overhead. sys_enter would seem to be a good candidate, yet in
a lot of cases there will be a lot of noise from syscalls triggered by other
processes on the system. So while searching for low-overhead alternative, I've
stumbled upon getpgid() syscall, which seems to be specific enough to not
suffer from accidental syscall by other apps.
This set of benchmarks compares tp, raw_tp w/ filtering by syscall ID, kprobe,
fentry and fmod_ret with returning error (so that syscall would not be
executed), to determine the lowest-overhead way. Here are results on my
machine (using benchs/run_bench_trigger.sh script):
base : 9.200 ± 0.319M/s
tp : 6.690 ± 0.125M/s
rawtp : 8.571 ± 0.214M/s
kprobe : 6.431 ± 0.048M/s
fentry : 8.955 ± 0.241M/s
fmodret : 8.903 ± 0.135M/s
So it seems like fmodret doesn't give much benefit for such lightweight
syscall. Raw tracepoint is pretty decent despite additional filtering logic,
but it will be called for any other syscall in the system, which rules it out.
Fentry, though, seems to be adding the least amoung of overhead and achieves
97.3% of performance of baseline no-BPF-attached syscall.
Using getpgid() seems to be preferable to set_task_comm() approach from
test_overhead, as it's about 2.35x faster in a baseline performance.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-5-andriin@fb.com
Add fmod_ret BPF program to existing test_overhead selftest. Also re-implement
user-space benchmarking part into benchmark runner to compare results. Results
with ./bench are consistently somewhat lower than test_overhead's, but relative
performance of various types of BPF programs stay consisten (e.g., kretprobe is
noticeably slower). This slowdown seems to be coming from the fact that
test_overhead is single-threaded, while benchmark always spins off at least
one thread for producer. This has been confirmed by hacking multi-threaded
test_overhead variant and also single-threaded bench variant. Resutls are
below. run_bench_rename.sh script from benchs/ subdirectory was used to
produce results for ./bench.
Single-threaded implementations
===============================
/* bench: single-threaded, atomics */
base : 4.622 ± 0.049M/s
kprobe : 3.673 ± 0.052M/s
kretprobe : 2.625 ± 0.052M/s
rawtp : 4.369 ± 0.089M/s
fentry : 4.201 ± 0.558M/s
fexit : 4.309 ± 0.148M/s
fmodret : 4.314 ± 0.203M/s
/* selftest: single-threaded, no atomics */
task_rename base 4555K events per sec
task_rename kprobe 3643K events per sec
task_rename kretprobe 2506K events per sec
task_rename raw_tp 4303K events per sec
task_rename fentry 4307K events per sec
task_rename fexit 4010K events per sec
task_rename fmod_ret 3984K events per sec
Multi-threaded implementations
==============================
/* bench: multi-threaded w/ atomics */
base : 3.910 ± 0.023M/s
kprobe : 3.048 ± 0.037M/s
kretprobe : 2.300 ± 0.015M/s
rawtp : 3.687 ± 0.034M/s
fentry : 3.740 ± 0.087M/s
fexit : 3.510 ± 0.009M/s
fmodret : 3.485 ± 0.050M/s
/* selftest: multi-threaded w/ atomics */
task_rename base 3872K events per sec
task_rename kprobe 3068K events per sec
task_rename kretprobe 2350K events per sec
task_rename raw_tp 3731K events per sec
task_rename fentry 3639K events per sec
task_rename fexit 3558K events per sec
task_rename fmod_ret 3511K events per sec
/* selftest: multi-threaded, no atomics */
task_rename base 3945K events per sec
task_rename kprobe 3298K events per sec
task_rename kretprobe 2451K events per sec
task_rename raw_tp 3718K events per sec
task_rename fentry 3782K events per sec
task_rename fexit 3543K events per sec
task_rename fmod_ret 3526K events per sec
Note that the fact that ./bench benchmark always uses atomic increments for
counting, while test_overhead doesn't, doesn't influence test results all that
much.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-4-andriin@fb.com
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200507185057.GA13981@embeddedor
The added test includes the following subtests:
- test verifier change for btf_id_or_null
- test load/create_iter/read for
ipv6_route/netlink/bpf_map/task/task_file
- test anon bpf iterator
- test anon bpf iterator reading one char at a time
- test file bpf iterator
- test overflow (single bpf program output not overflow)
- test overflow (single bpf program output overflows)
- test bpf prog returning 1
The ipv6_route tests the following verifier change
- access fields in the variable length array of the structure.
The netlink load tests the following verifier change
- put a btf_id ptr value in a stack and accessible to
tracing/iter programs.
The anon bpf iterator also tests link auto attach through skeleton.
$ test_progs -n 2
#2/1 btf_id_or_null:OK
#2/2 ipv6_route:OK
#2/3 netlink:OK
#2/4 bpf_map:OK
#2/5 task:OK
#2/6 task_file:OK
#2/7 anon:OK
#2/8 anon-read-one-char:OK
#2/9 file:OK
#2/10 overflow:OK
#2/11 overflow-e2big:OK
#2/12 prog-ret-1:OK
#2 bpf_iter:OK
Summary: 1/12 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175923.2477637-1-yhs@fb.com
The implementation is arbitrary, just to show how the bpf programs
can be written for bpf_map/task/task_file. They can be costomized
for specific needs.
For example, for bpf_map, the iterator prints out:
$ cat /sys/fs/bpf/my_bpf_map
id refcnt usercnt locked_vm
3 2 0 20
6 2 0 20
9 2 0 20
12 2 0 20
13 2 0 20
16 2 0 20
19 2 0 20
%%% END %%%
For task, the iterator prints out:
$ cat /sys/fs/bpf/my_task
tgid gid
1 1
2 2
....
1944 1944
1948 1948
1949 1949
1953 1953
=== END ===
For task/file, the iterator prints out:
$ cat /sys/fs/bpf/my_task_file
tgid gid fd file
1 1 0 ffffffff95c97600
1 1 1 ffffffff95c97600
1 1 2 ffffffff95c97600
....
1895 1895 255 ffffffff95c8fe00
1932 1932 0 ffffffff95c8fe00
1932 1932 1 ffffffff95c8fe00
1932 1932 2 ffffffff95c8fe00
1932 1932 3 ffffffff95c185c0
This is able to print out all open files (fd and file->f_op), so user can compare
f_op against a particular kernel file operations to find what it is.
For example, from /proc/kallsyms, we can find
ffffffff95c185c0 r eventfd_fops
so we will know tgid 1932 fd 3 is an eventfd file descriptor.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175922.2477576-1-yhs@fb.com
We want to have a tighter control on what ports we bind to in
the BPF_CGROUP_INET{4,6}_CONNECT hooks even if it means
connect() becomes slightly more expensive. The expensive part
comes from the fact that we now need to call inet_csk_get_port()
that verifies that the port is not used and allocates an entry
in the hash table for it.
Since we can't rely on "snum || !bind_address_no_port" to prevent
us from calling POST_BIND hook anymore, let's add another bind flag
to indicate that the call site is BPF program.
v5:
* fix wrong AF_INET (should be AF_INET6) in the bpf program for v6
v3:
* More bpf_bind documentation refinements (Martin KaFai Lau)
* Add UDP tests as well (Martin KaFai Lau)
* Don't start the thread, just do socket+bind+listen (Martin KaFai Lau)
v2:
* Update documentation (Andrey Ignatov)
* Pass BIND_FORCE_ADDRESS_NO_PORT conditionally (Andrey Ignatov)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-5-sdf@google.com
Andrey pointed out that we can use reno instead of dctcp for CC
tests and drop CONFIG_TCP_CONG_DCTCP=y requirement.
Fixes: beecf11bc2 ("bpf: Bpf_{g,s}etsockopt for struct bpf_sock_addr")
Suggested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200501224320.28441-1-sdf@google.com
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
Update bpf_sk_assign test to fetch the server socket from SOCKMAP, now that
map lookup from BPF in SOCKMAP is enabled. This way the test TC BPF program
doesn't need to know what address server socket is bound to.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-4-jakub@cloudflare.com
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
Similar to commit b7a0d65d80 ("bpf, testing: Workaround a verifier failure for test_progs")
fix test_sysctl_prog.c as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cls_redirect is a TC clsact based replacement for the glb-redirect iptables
module available at [1]. It enables what GitHub calls "second chance"
flows [2], similarly proposed by the Beamer paper [3]. In contrast to
glb-redirect, it also supports migrating UDP flows as long as connected
sockets are used. cls_redirect is in production at Cloudflare, as part of
our own L4 load balancer.
We have modified the encapsulation format slightly from glb-redirect:
glbgue_chained_routing.private_data_type has been repurposed to form a
version field and several flags. Both have been arranged in a way that
a private_data_type value of zero matches the current glb-redirect
behaviour. This means that cls_redirect will understand packets in
glb-redirect format, but not vice versa.
The test suite only covers basic features. For example, cls_redirect will
correctly forward path MTU discovery packets, but this is not exercised.
It is also possible to switch the encapsulation format to GRE on the last
hop, which is also not tested.
There are two major distinctions from glb-redirect: first, cls_redirect
relies on receiving encapsulated packets directly from a router. This is
because we don't have access to the neighbour tables from BPF, yet. See
forward_to_next_hop for details. Second, cls_redirect performs decapsulation
instead of using separate ipip and sit tunnel devices. This
avoids issues with the sit tunnel [4] and makes deploying the classifier
easier: decapsulated packets appear on the same interface, so existing
firewall rules continue to work as expected.
The code base started it's life on v4.19, so there are most likely still
hold overs from old workarounds. In no particular order:
- The function buf_off is required to defeat a clang optimization
that leads to the verifier rejecting the program due to pointer
arithmetic in the wrong order.
- The function pkt_parse_ipv6 is force inlined, because it would
otherwise be rejected due to returning a pointer to stack memory.
- The functions fill_tuple and classify_tcp contain kludges, because
we've run out of function arguments.
- The logic in general is rather nested, due to verifier restrictions.
I think this is either because the verifier loses track of constants
on the stack, or because it can't track enum like variables.
1: https://github.com/github/glb-director/tree/master/src/glb-redirect
2: https://github.com/github/glb-director/blob/master/docs/development/second-chance-design.md
3: https://www.usenix.org/conference/nsdi18/presentation/olteanu
4: https://github.com/github/glb-director/issues/64
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424185556.7358-2-lmb@cloudflare.com
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
The test was previously using an mprotect on the heap memory allocated
using malloc and was expecting the allocation to be always using
sbrk(2). This is, however, not always true and in certain conditions
malloc may end up using anonymous mmaps for heap alloctions. This means
that the following condition that is used in the "lsm/file_mprotect"
program is not sufficent to detect all mprotect calls done on heap
memory:
is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
vma->vm_end <= vma->vm_mm->brk);
The test is updated to use an mprotect on memory allocated on the stack.
While this would result in the splitting of the vma, this happens only
after the security_file_mprotect hook. So, the condition used in the BPF
program holds true.
Fixes: 03e54f100d ("bpf: lsm: Add selftests for BPF_PROG_TYPE_LSM")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200402200751.26372-1-kpsingh@chromium.org
Add selftests to exercise FD-based cgroup BPF program attachments and their
intermixing with legacy cgroup BPF attachments. Auto-detachment and program
replacement (both unconditional and cmpxchng-like) are tested as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-5-andriin@fb.com
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
Add support for testing UDP sk_assign to the existing tests.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-6-joe@wand.net.nz
Attach a tc direct-action classifier to lo in a fresh network
namespace, and rewrite all connection attempts to localhost:4321
to localhost:1234 (for port tests) and connections to unreachable
IPv4/IPv6 IPs to the local socket (for address tests). Includes
implementations for both TCP and UDP.
Keep in mind that both client to server and server to client traffic
passes the classifier.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-5-joe@wand.net.nz
Co-authored-by: Joe Stringer <joe@wand.net.nz>
* Load/attach a BPF program that hooks to file_mprotect (int)
and bprm_committed_creds (void).
* Perform an action that triggers the hook.
* Verify if the audit event was received using the shared global
variables for the process executed.
* Verify if the mprotect returns a -EPERM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-8-kpsingh@chromium.org
This adds a test to exercise the new bpf_map__set_initial_value() function.
The test simply overrides the global data section with all zeroes, and
checks that the new value makes it into the kernel map on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-2-toke@redhat.com
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds test to exercise the bpf_sk_storage_get()
and bpf_sk_storage_delete() helper from the bpf_dctcp.c.
The setup and check on the sk_storage is done immediately
before and after the connect().
This patch also takes this chance to move the pthread_create()
after the connect() has been done. That will remove the need of
the "wait_thread" label.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200320152107.2169904-1-kafai@fb.com
Remove unused len variable, which causes compilation warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314001834.3727680-1-andriin@fb.com
Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 different types of programs:
- tracepoint;
- raw tracepoint;
- raw tracepoint w/ direct memory reads (tp_btf);
- kprobe;
- fentry.
These programs are realistic variants of real-life tracing programs,
excercising vmlinux.h's usage with tracing applications.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-5-andriin@fb.com
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
Added one test, send_signal_sched_switch, to test bpf_send_signal()
helper triggered by sched/sched_switch tracepoint. This test can be used
to verify kernel deadlocks fixed by the previous commit. The test itself
is heavily borrowed from Commit eac9153f2b ("bpf/stackmap: Fix deadlock
with rq_lock in bpf_get_stack()").
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200304191105.2796601-1-yhs@fb.com
Test for two scenarios:
* When the fmod_ret program returns 0, the original function should
be called along with fentry and fexit programs.
* When the fmod_ret program returns a non-zero value, the original
function should not be called, no side effect should be observed and
fentry and fexit programs should be called.
The result from the kernel function call and whether a side-effect is
observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf)
syscall.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org
Currently, BTF_KIND_ENUM type doesn't record whether enum values should be
interpreted as signed or unsigned. In Linux, most enums are unsigned, though,
so interpreting them as unsigned matches real world better.
Change btf_dump test case to test maximum 32-bit value, instead of negative
value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-3-andriin@fb.com
Move BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macro into libbpf's bpf_tracing.h
header to make it available for non-selftests users.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-5-andriin@fb.com
For kretprobes, there is no point in capturing input arguments from pt_regs,
as they are going to be, most probably, clobbered by the time probed kernel
function returns. So switch BPF_KRETPROBE to accept zero or one argument
(optional return result).
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-4-andriin@fb.com
Now that SOCKMAP and SOCKHASH map types can store listening sockets,
user-space and BPF API is open to a new set of potential pitfalls.
Exercise the map operations, with extra attention to code paths susceptible
to races between map ops and socket cloning, and BPF helpers that work with
SOCKMAP/SOCKHASH to gain confidence that all works as expected.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-12-jakub@cloudflare.com
Use the new bpf_program__set_attach_target() API in the xdp_bpf2bpf
selftest so it can be referenced as an example on how to use it.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/158220520562.127661.14289388017034825841.stgit@xdp-tutorial
Add a selftest to test:
* default bpf_read_branch_records() behavior
* BPF_F_GET_BRANCH_RECORDS_SIZE flag behavior
* error path on non branch record perf events
* using helper to write to stack
* using helper to write to global
On host with hardware counter support:
# ./test_progs -t perf_branches
#27/1 perf_branches_hw:OK
#27/2 perf_branches_no_hw:OK
#27 perf_branches:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
On host without hardware counter support (VM):
# ./test_progs -t perf_branches
#27/1 perf_branches_hw:OK
#27/2 perf_branches_no_hw:OK
#27 perf_branches:OK
Summary: 1/2 PASSED, 1 SKIPPED, 0 FAILED
Also sync tools/include/uapi/linux/bpf.h.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200218030432.4600-3-dxu@dxuuu.xyz
There's limit of 40 programs tht can be attached
to trampoline for one function. Adding test that
tries to attach that many plus one extra that needs
to fail.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200123161508.915203-4-jolsa@kernel.org
The reuseport tests currently suffer from a race condition: FIN
packets count towards DROP_ERR_SKB_DATA, since they don't contain
a valid struct cmd. Tests will spuriously fail depending on whether
check_results is called before or after the FIN is processed.
Exit the BPF program early if FIN is set.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com
