Firmware node has more than fpga, aes and clock child nodes but also power,
reset, gpio, pinctrl and pcap which are not described yet.
All of them have binding in separate files but there is missing connection
to firmware node that's why describe it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1d7988cfadf3554d11f0779f96a670b4fd86ce5a.1703161663.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add dt-binding documentation for Versal NET platforms.
Versal Net is a new AMD/Xilinx SoC.
The SoC and its architecture is based on the Versal ACAP device.
The Versal Net device includes more security features in the
platform management controller (PMC) and increases the number of
CPUs in the application processing unit (APU) and the real-time
processing unit (RPU).
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1705406326-2947516-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
The alt_ref is present only in Versal-net devices.
Other versal devices do not have it. So remove alt_ref
for versal.
Fixes: 352546805a ("dt-bindings: clock: Add bindings for versal clock driver")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231128104348.16372-1-shubhrajyoti.datta@amd.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Every Qualcomm SoC physically has a "CRYPTO0<->DDR" interconnect lane.
Allow this property to be present, no matter the SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-4-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document scm compatible for X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124100608.29964-5-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmUsTdwVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FffsQAMcY5NKBZqbQu5wNr2zPnKW5m/30
lYi4bW42mlY6Mo3h97LLxjGM9bqsmPasfAxv/84viN0JYxrSVye/zNtD35qTQBtu
t8O8vdOaOYXIc8dwqC16Fl0kI5pm9tl7p5SJmGAUZBvIGUIGngy3gZOYM+HzyMQr
UXFO6dO0tQvjowd1t0xE51UNm4J79Vm8HjtuR1pc4i+fZhsy5XhZYq9e4531Yc7o
lNacBugjXhurw/rz0odNuRzKn+He+7KQR/hSNv8B2MbH0ZUP+k4VUaRSD9TZyBgC
cOahbCfVLkGwepPFGuaaJUUgo8/aa4HiAbdyOrNL2ozYkoLv/PbRrLF0R9KgXK5v
LPXpqXt97+rWPnq2iPrfZlo4LAj6JVSCUCxIRZFcWyDFv+wHsYuRbO64s1+MC7+M
CPpvup31PLGCeR9Joo/WTt9iAUPJ4BY9v4mkjIdmJF371WRryP4um5Ln6xMC+fIe
U/Ss8mPNpSM+guDo8LbdCGAcxWTDk8TOXxa/888y/4Q5Mg97nn0hY2KK4JBmJ7I3
Thd0n9vXjM3oOwPGLC7Y2zj9ZQI5k7JKn331yPS4Hb20SKGEztlaJp4B1DdA5/ul
4BUoh3HWV7dB4l+felrAmPAzAUXvyfGrDBJhXe2dabRJjMhouQ6Wudn3OlC4VP/l
fjszjVvPFt7CE30C
=B1Kn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7XXT
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.7
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
* tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: socinfo: Convert to platform remove callback returning void
soc: qcom: smsm: Convert to platform remove callback returning void
soc: qcom: smp2p: Convert to platform remove callback returning void
soc: qcom: smem: Convert to platform remove callback returning void
soc: qcom: rmtfs_mem: Convert to platform remove callback returning void
soc: qcom: qcom_stats: Convert to platform remove callback returning void
soc: qcom: qcom_gsbi: Convert to platform remove callback returning void
soc: qcom: qcom_aoss: Convert to platform remove callback returning void
soc: qcom: pmic_glink: Convert to platform remove callback returning void
soc: qcom: ocmem: Convert to platform remove callback returning void
soc: qcom: llcc-qcom: Convert to platform remove callback returning void
soc: qcom: icc-bwmon: Convert to platform remove callback returning void
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
soc: qcom: llcc: Handle a second device without data corruption
soc: qcom: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: smem: Annotate struct qcom_smem with __counted_by
soc: qcom: rmtfs: Support discarding guard pages
dt-bindings: reserved-memory: rmtfs: Allow guard pages
dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
firmware: qcom_scm: disable SDI if required
...
Link: https://lore.kernel.org/r/20231015204014.855672-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce compatible "qcom,scmi-smc" for SCMI smc/hvc transport channel for
Qualcomm virtual platforms.
This compatible mandates populating an additional parameter 'capability-id'
from the last 8 bytes of the shmem channel.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20231009191437.27926-2-quic_nkela@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The protocol@13 node is describing the performance scaling option for the
ARM SCMI interface, as a clock provider. This is unnecessary limiting, as
performance scaling is in many cases not limited to switching a clock's
frequency.
Therefore, let's extend the binding so the interface can be modelled as a
generic performance domain too. The common way to describe this, is to use
the power-domain DT bindings, so let's use that.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
It seems that IPQ5018 compatible was never documented in the bindings.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230816164641.3371878-3-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
means that WDT being asserted or just trying to reboot will hang the board
in the debug mode and only pulling the power and repowering will help.
Some IPQ4019 boards like Google WiFI have it enabled as well.
So, lets add a boolean property to indicate that SDI is enabled by default
and thus needs to be disabled by the kernel.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTuZOQACgkQYKtH/8kJ
UieJGw/5AWNde1VYY/3uhdHSNeXtF+1LICZYoLQiSTWbpnlEoLhQseymRCybWRhd
882TLCuEMrHV+ftP5z+kdYS+QJE3K8GNRxp4vAgLTRwnZItEE3qD8/jNeTtK5BqT
7h9OYZJQhfczsIXISIljsvez2T3n5fA1glq2drc2fLl9AbEYvlByDCtCNmzqMYli
II/S03vJqT3eFnOwut70EdFtnW3FIJ+HJLWu46zWLhrx2XJVS8hNaWqhQ3uKZ58p
Q9cWAltu4biaILVpD/0vZST+m77HqcrPtVSwR9uHvzEzDEzYk/GYzn7DDlWgdVbt
DJMkgK1pLJq67KpsefMqgTioCh2FBiWfNQ6FjsgJ06ykXgThLJfbzeeB4zU4fnDT
YmcV/8gR6Np/wNeSBlPNLI6BZ1EF4h0Lkm6p//QgayYhdMVbE59K+SNwq4wps24l
JU3dcxxblwpVmAaKSL5p0lbYTn8VKuz9rcXYIziQm1m8zaCwjq863bDFJKz8JsP8
0tQ/azvS4Off9fKIMbUE4fiFmDGhgLTi0XL+GIlOFJF6JS6ToD2nL4FGRBJZPWNn
iPNEV0F/dDnonB7Jfu92NodULY6B0mXs5/q+dPwde6oSpIDU2ORyNRb6Zk4fGC0l
C+iPdb3BErf+GQYBLnRqQaMuV0sA6mN89lC6KlzWwwHK0UUoohg=
=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
Cleanup bindings dropping the last remaining unneeded quotes. With this,
the check for this can be enabled in yamllint.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> # for mtd
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for AT24/I2C
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230823183749.2609013-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Remove the zynqmp-genpd.txt binding. Add the power-domain-cells
property from the zynqmp-genpd.txt binding to firmware binding.
Signed-off-by: Naman Trivedi Manojbhai <naman.trivedimanojbhai@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230816130309.1338446-1-naman.trivedimanojbhai@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add memory-region property to the tegra186-bpmp binding to support
DRAM MRQ GSCs.
Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Just like all other Qualcomm SoCs, SC8280XP SCM should be fed an
interconnect path. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-1-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066 Bluetooth,
infineon,irps5401, new NXP i.MX GPT variants, shineworld lh133k MIPI
SPI panel, Socionext Synquacer platforms, RK3588 PCIe, ST M95640
EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding
-----BEGIN PGP SIGNATURE-----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=onek
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066
Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding"
* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
dt-bindings: PCI: dwc: rockchip: Update for RK3588
dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
dt-bindings: pwm: drop unneeded quotes
dt-bindings: crypto: drop unneeded quotes
dt-bindings: arm: socionext: add Synquacer platforms
dt-bindings: connector: usb: allow a single HS port
dt-bindings: bus: ti-sysc: fix typo
of: reserved_mem: Use stable allocation order
of: reserved_mem: Try to keep range allocations contiguous
dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
dt-bindings: dvfs: drop unneeded quotes
dt-bindings: gpu: drop unneeded quotes
dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
dt-bindings: rockchip: grf: drop unneeded quotes
dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
dt-bindings: Remove last usage of "binding" or "schema" in titles
dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
...
Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable. Specifically,
you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we
call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates
down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE.
Let's allow devices like trogdor to be described properly by allowing
"dma-coherent" in the SCM node.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616081440.v2.1.Ie79b5f0ed45739695c9970df121e11d724909157@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Couple of main additions :-
1. Support for multiple SMC/HVC transports for SCMI:
Some platforms need to support multiple SCMI instances within
a platform(more commonly in a VM). The same SMC/HVC FID is used with
all the instances. The platform or the hypervisor needs a way to
distinguish among SMC/HVC calls made from different instances.
This change adds support for passing shmem channel address as the
parameters in the SMC/HVC call. The address is split into 4KB-page
and offset for simiplicity.
2. Addition od SCMI v3.2 explicit powercap enable/disable support:
SCMI v3.2 specification introduces support to disable powercapping
as a whole on the desired zones.
This change adds the needed support to the core SCMI powercap protocol,
exposing enable/disable protocol operations and then wiring up the new
operartions in the related powercap framework helpers.
-----BEGIN PGP SIGNATURE-----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=uVB0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ze5+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.5
Couple of main additions :-
1. Support for multiple SMC/HVC transports for SCMI:
Some platforms need to support multiple SCMI instances within
a platform(more commonly in a VM). The same SMC/HVC FID is used with
all the instances. The platform or the hypervisor needs a way to
distinguish among SMC/HVC calls made from different instances.
This change adds support for passing shmem channel address as the
parameters in the SMC/HVC call. The address is split into 4KB-page
and offset for simiplicity.
2. Addition od SCMI v3.2 explicit powercap enable/disable support:
SCMI v3.2 specification introduces support to disable powercapping
as a whole on the desired zones.
This change adds the needed support to the core SCMI powercap protocol,
exposing enable/disable protocol operations and then wiring up the new
operartions in the related powercap framework helpers.
* tag 'scmi-updates-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
powercap: arm_scmi: Add support for disabling powercaps on a zone
firmware: arm_scmi: Add Powercap protocol enable support
firmware: arm_scmi: Refactor the internal powercap get/set helpers
firmware: arm_scmi: Augment SMC/HVC to allow optional parameters
dt-bindings: firmware: arm,scmi: support for parameter in smc/hvc call
Link: https://lore.kernel.org/r/20230612121017.4108104-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.5, please pull the following:
- Krzysztof adds missing cache properties for the BCM63xx DSL routers
- Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license,
and he fixes a number of Device Tree nodes warnings, adds MAC address
for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory
information to the DTS
- Stanislav updates the "BCM mobile" SoCs DTS files to fix various
warnings
- Aurelien enables the BCM283x DTS files to be built with relocation
information to make them usable with DT overlays
- Christian fixes the Meraki DTS to have correct NAND ECC properties,
correct partition numbers and fixed-link node(s) properties
-----BEGIN PGP SIGNATURE-----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=t3sW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AA1g
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.5, please pull the following:
- Krzysztof adds missing cache properties for the BCM63xx DSL routers
- Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license,
and he fixes a number of Device Tree nodes warnings, adds MAC address
for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory
information to the DTS
- Stanislav updates the "BCM mobile" SoCs DTS files to fix various
warnings
- Aurelien enables the BCM283x DTS files to be built with relocation
information to make them usable with DT overlays
- Christian fixes the Meraki DTS to have correct NAND ECC properties,
correct partition numbers and fixed-link node(s) properties
* tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits)
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings
dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties
dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding
ARM: dts: BCM5301X: fix duplex-full => full-duplex
ARM: dts: BCM5301X: MR32: remove partition index numbers
ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property
dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML
ARM: dts: bcm21664-garnet: use node labels
ARM: dts: bcm11351/21664: add UART, I2C node labels
ARM: dts: bcm-mobile: move status properties to the end of nodes
ARM: dts: bcm21664/23550: use CCU compatibles directly
ARM: dts: bcm-mobile: change "" includes to <> where applicable
ARM: dts: BCM5301X: Describe switch ports in the main DTS
ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys
ARM: dts: BCM5301X: Drop invalid #usb-cells
dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2)
ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties
...
Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint. Also absolute path
starting with /schemas is preferred.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609140749.65102-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Broadcom Kona family Secure Monitor bounce buffer bindings
to DT schema.
Changes during conversion:
- move from misc to firmware subdirectory
- add used, but previously undocumented SoC-specific compatibles
- drop deprecated compatibles (they've been deprecated for ~10 years)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20230618151308.GA23586@standask-GA-A55M-S2HP
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com
Currently, smc/hvc calls are made with smc-id only. The parameters are
all set to zeros. This change defines a new compatible string that can
be used to pass shmem address(4KB-page, offset) as two parameters in
SMC/HVC doorbell.
This is useful when multiple scmi instances are used with common smc-id.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230506182428.25343-2-quic_nkela@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
-----BEGIN PGP SIGNATURE-----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=8/Bb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ9aAIACgkQYKtH/8kJ
UifrxA/9HZmzS1B5G0hR8JkENHNrCb6eNfygQo0Xbyrz0240k1cM5GK3APo/oDM8
RDTIcjh0o2nm4WJ9xvd0SmNQw9+EsrKi19weWVwoXKfYkniKPA+ULArJDXqy7rVT
+m6s4tOJT2KaWVHZUDhSWRjeWIdv8olhXPxrcVvBpXEBRBrt4bO2UZLvJPXxkiSw
r8Fih3Wo0QVCOBvxL6PMAQ1IKjqDdQCc1YqnQ+8kOSSfIeE0mVVtxhGAk21Ss8OU
GCDJ4bSnReENi0KtKTBFTImfF6S2hxAHCTG8KZaR123I3csslRQHhVp+RnVqO61T
buoFdqmN8Rf9/3pHdzw1rc7+LKX22YFn1n5kKGt1yRXgusJw4hw+EYadSSw0K7g+
kFplZqfb84Ps5+43xHZZ8jbc5Ifch/xQs2S3X0ysvqgBrZTZbwsEqn/yLOT6TL1/
g5ykA8lzApBMbk5y/6B7bXUcLtpt60HwXIzFHk0rxmhE9smcjntZ8MvrcbkZjPAY
136L42P2zn3eBd8kKDzUOU1Q/+YGuwpOQ51ZjEGCOcw8+XanDjUAxCec30L2qThx
hGrkRY1d2at0pK+xOIQwL/mnyJ52nRzaGXlDBaANhPO/ITAVxgTAPp3MYc6k1hz1
WRG+t1JE2TChm5t881yUhex87w1pL4MgficgPq1BChExk3fJAPM=
=maaU
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.4
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
* tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
firmware: arm_scmi: Fix xfers allocation on Rx channel
firmware: arm_scmi: Use the bitmap API to allocate bitmaps
firmware: arm_scmi: Fix device node validation for mailbox transport
firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path
firmware: arm_scmi: Remove duplicate include header inclusion
firmware: arm_scmi: Return a literal instead of a variable
firmware: arm_scmi: Clean up a return statement in scmi_probe
Link: https://lore.kernel.org/r/20230417145743.1904318-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a compatible for Qualcomm QCM2290 SCM and add it to the core clock
users list.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-1-dae06f8830dc@linaro.org
SCMI defines two kinds of communication channels between the agent and the
platform: one bidirectional 'a2p' channel used by the agent to send SCMI
commands and synchronously receive the related replies, and an optional
'p2a' unidirectional channel used to asynchronously receive delayed
responses and notifications emitted from the platform.
When configuring an SCMI transport based on mailboxes, the current binding
supports only mailboxes providing bidirectional channels: in such a case
one mailbox channel can be easily assigned to each SCMI channel as above
described.
In case, instead, to have to deal with mailboxes providing only distinct
unidirectional channels, it becomes necessary to extend the binding in
order to be able to bind 2 distinct unidirectional mailbox channels to the
same SCMI 'a2p' channel.
Bidirectional and unidirectional channels support for the SCMI mailbox
transport can coexist by carefully considering the effective combination
of defined 'mboxes' and 'shmem' descriptors.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404115026.2828149-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Update compatible for QDU1000 and QRU1000 to include the interconnect
these devices have.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306231202.12223-2-quic_molvera@quicinc.com
Document the compatible for IPQ5332 SCM.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-8-quic_kathirav@quicinc.com
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
-----BEGIN PGP SIGNATURE-----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=+KgT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8eLr
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
-----BEGIN PGP SIGNATURE-----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=EWZ7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B0bJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SCMI protocol child nodes are missing any constraints on unknown
properties. Specifically, either 'unevaluatedProperties' or
'additionalProperties' is needed. The current structure with a regex
match for all child nodes doesn't work for this purpose, so let's move
the common properties '$defs' entry which each specific protocol node
can reference and set 'unevaluatedProperties: false'.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230124222023.316089-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add an interrupt specification to the bindings to support the wait-queue
feature on SM8450 SoCs.
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113161114.22607-2-quic_sibis@quicinc.com
Add compatible for scm driver for QDU1000 and QRU1000 platforms. These
drivers only require the compatible field, so update the bindings
accordingly for these platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216231312.22574-1-quic_molvera@quicinc.com
SCM has clock inputs and interconnects only on some of the SoCs, so
disallow them inb other cases, which makes the binding stricter.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221122092345.44369-2-krzysztof.kozlowski@linaro.org
