Remove unnecessary comments, enable restore mode using
'|=' operator, fixes the alignment to improve the code
readability.
v2: Move all restoration flag check to bitwise '&' operator
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sienna cichlid needs one vf mode which allows vf to set and get
clock status from guest vm. So now expose the required interface
and allow some smu request on VF mode. Also since this asic blocked
direct MMIO access, use KIQ to send SMU request under sriov vf.
OD use same command as getting pp table which is not allowed for
sienna cichlid, so remove OD feature under sriov vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks od_vddgfx_offset, od_cclk
Context mismatch with revision v3 to patch 0003
Modified Functions
smu_sys_set_pp_table() - modifed signature to match Powerplay API set_pp_table
smu_force_performance_level() - modifed arg0 to match Powerplay API force_performance_level
smu_od_edit_dpm_table() - modifed arg0 to match Powerplay API odn_edit_dpm_table
Other Changes
smu_od_edit_dpm_table() - removed call to task(READJUST_POWER_STATE) after COMMIT_TABLE,
now handled in calling function
amdgpu_set_power_dpm_force_performance_level() - now checks thermal for swsmu systems before trying to change level
amdgpu_set_pp_od_clk_voltage() - now attempts to set fine_grain_clock_vol before swsmu edit dpm table
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix errors and warnings flagged by checkpatch
v3: Context mismatch with revision v3 to patch 0003
New Functions
smu_get_mclk - implementation of the Powerplay API function get_mclk
smu_get_sclk - implementation of the Powerplay API function get_sclk
smu_handle_dpm_task - implementation of the Powerplay API function dispatch_tasks
Modified Functions
smu_dpm_set_power_gate - - modifed arg0 to match Powerplay API set_powergating_by_smu
Other Changes
removed special smu handling in dpm functions and called through Powerplay API
call to smu_dpm_set_power_gate via Powerplay API now locks mutex for UVD and VCE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch
New Functions
smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
smu_force_ppclk_levels() - accepts Powerplay enum pp_clock_type to specify clock to change
smu_print_ppclk_levels() - accepts Powerplay enum pp_clock_type to request clock levels
amdgpu_get_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to request clock levels and allows
all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
amdgpu_set_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to set clock levels and allows
all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath
Modified Functions
smu_force_smuclk_levels - changed function name to make clear difference to smu_force_ppclk_levels
smu_force_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_force_smuclk_levels
smu_print_smuclk_levels - changed function name to make clear difference to smu_print_ppclk_levels
smu_print_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_print_smuclk_levels
smu_sys_get_gpu_metrics - modifed arg0 to match Powerplay API get_gpu_metrics
smu_get_power_profile_mode - modifed arg0 to match Powerplay API get_power_profile_mode
smu_set_power_profile_mode - modifed arg0 to match Powerplay API set_power_profile_mode
- removed arg lock_needed, mutex always locked, internal functions
can call smu_bump if they already hold lock
smu_switch_power_profile - now calls smu_bump as already holds mutex lock
smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
amdgpu_get_pp_od_clk_voltage - uses smu_print_ppclk_levels
amdgpu_{set,get}_pp_dpm_$CLK - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}
Other Changes
added 5 smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in pm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add comment to highlight assignment that changes uint32_t value to int
fix errors flagged by checkpatch.pl
New Functions
smu_get_baco_capability() - Implement Powerplay API get_asic_baco_capability
smu_baco_set_state() - Implement Powerplay API set_asic_baco_state
Modified Functions
smu_read_sensor() - modifed signature to match Powerplay API read_sensor
Other Changes
added 3 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in 5 dpm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove check for error during swsmu amdgpu_dpm_get_pp_num_states() call to match previous powerplay behaviour
v3: removed smu implementation of powerplay get_power_limit
Resolved context clashes with other commits
Modified Files
smu_set_power_limit() - modifed arg0 to match Powerplay API set_power_limit
smu_sys_get_pp_table() - modifed signature to match Powerplay API get_pp_table
smu_get_power_num_states() - modifed arg0 to match Powerplay API get_pp_num_states
smu_get_current_power_state() - modifed arg0 to match Powerplay API get_current_power_state
smu_sys_get_pp_feature_mask() - modifed signature to match Powerplay API get_ppfeature_status
smu_sys_set_pp_feature_mask() - modifed arg0 to match Powerplay API set_ppfeature_status
Other Changes
added 6 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: changed error return value of smu_get_fan_control_mode to AMD_FAN_CTRL_NONE
fixed type in amdgpu_hwmon_get_pwm1_enable() print statement
fixed indent flagged by checkpatch.pl
Modified Functions
smu_set_fan_speed_rpm() - modifed arg0 to match Powerplay API set_fan_speed_rpm
smu_get_fan_control_mode() - modifed signature to match Powerplay API get_fan_control_mode
smu_set_fan_control_mode() - modifed signature to match Powerplay API set_fan_control_mode
smu_get_fan_speed_percent() - modifed signature to match Powerplay API get_fan_speed_percent
smu_set_fan_speed_percent() - modifed signature to match Powerplay API set_fan_speed_percent
smu_get_fan_speed_rpm() - modifed arg0 to match Powerplay API get_fan_speed_rpm
Other Changes
added 6 above smu fan Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modified Functions
smu_set_xgmi_pstate() - modifed arg0 to match Powerplay API set_xgmi_pstate
smu_mode2_reset() - modifed arg0 to match Powerplay API asic_reset_mode_2
smu_switch_power_profile() - modifed arg0 to match Powerplay API switch_power_profile
smu_set_mp1_state() - modifed arg0 to match Powerplay API set_mp1_state
smu_set_df_cstate() - modifed arg0 to match Powerplay API set_df_cstate
smu_enable_mgpu_fan_boost() - modifed arg0 to match Powerplay API enable_mgpu_fan_boost
Other Changes
added above smu reset Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: updated the structure name to swsmu_pm_funcs
Modified Functions
smu_get_performance_level() - modifed arg0 to match Powerplay API get_performance_level
Other Changes
added a new structure swsmu_dpm_funcs to hold smu functions for Powerplay API
removed special smu handling from amdgpu_get_power_dpm_force_performance_level
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement hwmon API for reading/setting slow and fast PPT limit.
APU power is managed to system-level requirements through the PPT
(package power tracking) feature. PPT is intended to limit power to the
requirements of the power source and could be dynamically updated to
maximize APU performance within the system power budget.
Here FAST_PPT_LIMIT manages the ~10 ms moving average of APU power,
while SLOW_PPT_LIMIT manages the configurable, thermally significant
moving average of APU power (default ~5000 ms).
User could read slow/fast ppt limit using command "cat power*_cap" or
"sensors" in the hwmon device directory. User could adjust values of
slow/fast ppt limit as needed depending on workloads through command
"echo ## > power*_cap".
Example:
$ echo 15000000 > power1_cap
$ echo 18000000 > power2_cap
$ sensors
amdgpu-pci-0300
Adapter: PCI adapter
slowPPT: 9.04W (cap = 15.00 W)
fastPPT: 9.04W (cap = 18.00 W)
v2: align with existing interfaces for the getting/setting of PPT
limits. Encode the upper 8 bits of limit value to distinguish
slow and fast power limit type.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original smu_get_power_limit callback accepts the power limit level
parameter as bool which limits to max and current. For possible needs to
retrieve other level like min, extend the parameter type using enum.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to remove some useless code for vangogh.
In the earlier code, vangogh can't finish all the sequence of
smu late init. But now vangogh has one stable work state,so
remove the useless code.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Both interfaces work properly on the boards I have.
Let's try and use the percent interface instead.
v2: rebase on revert
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11. The follow on patch
fixes this properly for 5.12.
This reverts commit 8d6e65adc2.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
store swsmu user power configurations which include
power limit, clock frequencies, fan speed and fan mode
on suspend and reinstate on resume.
V2: Addressed Lijo's review comments
added a function to set clock interdependencies
add check on fan control mode to reapply fan speed
V3: Addressed review comments from Alex
moved store logic and reinstate function call into swSMU
V4: added a logic to keep off storing configurations in suspend
V5: Addressed review comments from Lijo
add a restore flag
give restore priority to mclk comparing fclk and socclk
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to modify the fine grain tuning function for vangogh.
This patch uses the existing old flag to make the two sysfs files
work separately -- "power_dpm_force_performance_level" and
"pp_od_clk_voltage".
Only the power_dpm_force_performance_level is switched to "manual"
mode, the fine grain tuning function will be started.
In other mode, including "high","low","min_sclk","min_mclk",
"standard" and "peak", the fine grain tuning function will be shut down,
and the frequency range of gfx and cpu clock will be restored the
default values.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to modify the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
It is risky to add two new flags to common smu struct, so
this patch uses the existing flag to make these two sysfs nodes works
separately. Only when power_dpm_force_perfomance_level is changed
to "manual" mode, the fine grain function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the fine grain tuning function will be shut down and the frequency range
of gfx will be restored the default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The core processor clocks will be stored in smu metric table, then we
add this runtime information into amdgpu_pm_info interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable the fine grain tuning function for renoir.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When user specifies a reduced WGP(CU) config via disalbe_cu module
parameter, this does not disable the clocks which uses additional
power. This interface send active WGP number to SMU and SMU will
cooperate with RLC to power off relative WGPs.
v2: Add request active WGPs in Vangogh smu post init.
Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
skip load smu and sdma fw on sriov due to sos,
ta and asd fw have been skipped for SIENNA_CICHLID.
V2:
move asic check into smu11
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta
and asd fw in SRIOV for vega10, so adjust above fw and skip load them
in SRIOV only for navi12.
v2: remove unnecessary asic type check.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some features are still disabled after runtime pm resume. This can take
the hardware back.
Unlike other projects, this doesn't need pptable retransfer.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to reset DPM for PPTable uploading on
dimgrey_cavefish and PMFW can handle it, same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enale the fine grain tuning function for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx_state_change_set() funtion can support set GFX power
change status to D0/D3.
v2: make sure to register callback (Alex)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable the rest functions of swSMU for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable/enable the GPO feature on UMD pstate entering/exiting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For entering UMD stable Pstate, the operations to enter rlc_safe
mode, disable mgcg_perfmon and disable PCIE aspm are needed. And
the opposite operations should be performed on UMD stable Pstate
exiting.
V2: take those ASICs(CI/SI/VI) which may not support this into
consideration
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset might get called during init time, before
sw_init has been called.
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from the initial implementation, but
never used. Drop them.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Noticed-by: Ryan Taylor <ryan.taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vangogh ppt funcions into swSMU block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to partially enable swSMU for vangogh for the moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can schedule work from interrupts. This might include
long tasks or things that could sleep.
Fixes: e1188aacad ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.
v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already set inside the implementation of
smu_set_watermarks_table().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As they have no real dependence. And for Navi1x, the socclk/uclk dpms
are enabled after DAL initialization.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since that should be the correct place to put ASIC specific
workarounds.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If dc reported by gpio is supported, the power source switching will
be performed by pmfw automatically. Thus the power source setting
workaround for Navi1x will be not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The convertion to "struct dm_pp_clock_range_for_mcif_wm_set_soc15"
is totally unnecessary and can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Either this was already performed in parent API. Or the table is
confirmed to exist.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As these operations are performed in hardware setup and there
is actually no race conditions during this period considering:
1. the hardware setup is serial and cannot be in parallel
2. all other operations can be performed only after hardware
setup complete.
V2: rich the commit log description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This dummy reading buffer will be used for the new Navi1x
UMC CDR workaround.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That's where the uclk dpm get enabled and then the
uclk cdr workaround can be applied.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that ASIC specific actions can be added.
V2: better namings
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
