Unlike all designs supported sofar the Lenovo Yoga Tab 3 YT3-X90 does not
have its internal microphone (intmic) on IN3L with the headset microphone
on IN1L. Instead this tablet has the intmic on IN1L and the hsmic on IN2L.
Add a BYT_WM5102_IN_MAP quirk mechanism to allow selecting between
different input maps and add support for both setups with the current
settings being the default map.
The new INTMIC_IN1L_HSMIC_IN2L map is enabled by default on CHT because
the Lenovo Yoga Tab 3 YT3-X90 model is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
input maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
extend the components string with this info too.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some x86 WM5102 designs don't use the SPK pins for speaker output
instead they use the HPOUT2L + HPOUT2R for the speakers.
Add an BYT_WM5102_OUT_MAP quirk mechanism to allow selecting
between 2 output maps, one for the speakers on the SPK output pins
and one for the speakers on the HPOUT2 pins.
The new HPOUT2 map is enabled by default on CHT because this is used on
the Lenovo Yoga Tab 3 YT3-X90 model which is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
output maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
setup a components string with this info too.
While at it also drop the unused "Line Out" route.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cherry Trail SoC only supports 19200000 as clk-frequency for
the pmc_plt_clk used for the audio codec.
Add a BYT_WM5102_MCLK_19_2MHZ quirk for this and enable this
by default on Cherry Trail SoCs.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the standard intel board file quirk mechanism also used in many
other intel board drivers and add a BYT_WM5102_SSP2 quirk setting
for designs using SSP2 instead of SSP0.
And enable the new BYT_WM5102_SSP2 quirk on Cherry Trail devices
since those always use SSP2.
The logging of the quirks uses dev_info_once() because probe() may run
multiple times because of snd_soc_register_card() returning -EPROBE_DEFER.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android
with a custom kernel as factory OS, does not list the used WM5102 codec
inside its DSDT.
So acpi_dev_get_first_match_dev() is going to fail on this board.
Fallback to using "spi-$(mach->id)" as codec device name in this case
to allow bytcr_wm5102 to work on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add functions for machine drivers to initialize dmic01 and dmic16k DAI
links.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support back to RPL devices that lost audio after the RPL/ADL
split. The hardware configuration is:
SSP0: NAU88L25/NAU88L25YGB codec
SSP1: MAX98360A amplifier
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 supports 4 hardwired microphones, but only supports up to 2
microphone headsets. Only dataport 1 can support 4 channel capture,
but that is currently used for the headset microphone. Switch things
around such that DP1 is used for the builtin mics and DP2 is used for
the headset microphones.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes sense to report the microphone separately from the headphones,
that way ALSA UCM can differentiate between switching the playback and
the capture. For example, still using the built-in microphone path when
a 3-pole headset is inserted.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functional change, just some trivial whitespace fixups.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.
Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.
Fixes: 317dcdecaf ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new module to host common functions for machine drivers. This
patch supports Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common header for Intel HDMI dai link (idisp) initialization.
Declare the sof_hdmi_private structure in machine driver private data
and use it to initialize dai link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt712_sdca is used by rt712 and rt713. Using different
cards->components string allow UCM distinguish the two codecs.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the MTL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg19fo4o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Cirrus Logic CS42L43 using SoundWire.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919020011.1896041-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in MTL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Rather than keeping a single array of CPU dai link components allocate a
smaller one for each DAI link, this reduces the amount of state that
needs to be passed back and forth in the driver.
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about amplifier type.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-20-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports ADL boards which implement DA7219 on SSP0
and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK
locking problem. To use this mode, MCLK frequency must be 12.288 or
24.576MHz.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-19-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use maxim-common module to handle speaker amp DAI link registration.
No functional change in this commit.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the driver file and kernel option to be consistent with other
SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use realtek-common module to support rt1019p speaker amplifier.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use nuvoton-common module to support nau8318 speaker amplifier.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement nau8318 support code in this common module so it could be
shared between multiple SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
