Add a new test_stress_06 for the per io daemons feature. This is just a
copy of test_stress_01 with the per_io_tasks flag added, with varying
amounts of nthreads. This test is able to reproduce a panic which was
caught manually during development [1]; in the current version of this
patch set, it passes.
Note that this commit also makes all stress tests using the
run_io_and_remove helper more stressful by additionally exercising the
batch submit (queue_rqs) path.
[1] https://lore.kernel.org/linux-block/aDgwGoGCEpwd1mFY@fedora/
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-8-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE.
Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for
supporting this feature, then verify the feature via generic_10.
Cc: Omri Mann <omri@nvidia.com>
Cc: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__run_io_and_remove() is used in several stress tests for running heavy
IO vs. removing device meantime.
However, sequential `readwrite` is taken in the fio script, which isn't
correct, we should take random IO for saturating ublk device.
Also turns out '--num_jobs=4' isn't stressful enough, so change it to
'--num_jobs=$(nproc)'.
Finally we don't cover single queue test in `test_stress_02.sh`, so add
single queue test which can trigger request tag recycling easier.
With above change the issue in #1 can be reproduced reliably in stress_02.sh.
Link:https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/#1
Cc: Jared Holzman <jholzman@nvidia.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250519031620.245749-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some distributions, such as centos stream 9, still have a version of
coreutils which does not yet support the %Hr and %Lr formats for stat(1)
[1, 2]. Running ublk selftests on these distributions results in the
following error in tests that use the _get_disk_dev_t helper:
line 23: ?r: syntax error: operand expected (error token is "?r")
To better accommodate older distributions, rewrite _get_disk_dev_t to
use the much older %t and %T formats for stat instead.
[1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114
[2] https://pkgs.org/download/coreutils
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
test may exit early because of missing program or not having required
feature before calling _prep_test(), then $UBLK_TMP isn't cleaned.
Fix it by moving creating $UBLK_TMP into _prep_test(), any resources
created since _prep_test() will be cleaned by _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Detach ublk daemon from the starting process completely by double-fork and
clearing its process group, so that `_add_ublk_dev` can return from sub-shell.
Then it is more friendly for writing shell test script for adding/recovering
ublk device.
Prepare for running ublk test in parallel.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test test_generic_02.sh for covering IO dispatch order in case of MQ.
Especially we just support ->queue_rqs() which may affect IO dispatch
order.
Add test_loop_05.sh and test_stripe_03.sh for covering MQ.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block layer, ublk and io_uring might re-order IO in the past
- plug
- queue ublk io command via task work
Add one test for verifying if sequential WRITE IO is dispatched in order.
- null target is taken, so we can just observe io order from
`tracepoint:block:block_rq_complete` which represents the dispatch order
- WRITE IO is taken because READ may come from system-wide utility
Cc: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_drv may be built-in, so don't show modprobe failure, and we
do check `/dev/ublk-control` for skipping test if ublk_drv isn't
enabled.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250320013743.4167489-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add UBLK_TEST_QUIET, so we can print test result(PASS/SKIP/FAIL) only.
Also always run from test script's current directory, then the same test
script can be started from other work directory.
This way helps a lot to reuse this test source code and scripts for
other projects(liburing, blktests, ...)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. killing ublk server, so io_uring exit &
cancel code path can be covered, same with ublk's cancel code path.
Especially IO buffer lifetime is one big thing for ublk zero copy, the added
test can verify if this area works as expected.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. removing device for verifying that
ublk device removal can work as expected when heavy IO workloads are in
progress.
null, loop and loop/zc are covered in this tests.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Load ublk_drv module in _prep_test(), and unload it in _cleanup_test(),
so that test can always be done in consistent state.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move zero copy feature check into _add_ublk_dev() since we will have
more tests which requires to cover zero copy.
Then one check function of _check_add_dev() has to be added for dealing
with cleanup since '_add_ublk_dev()' is run in sub-shell, and we can't
exit from it to terminal shell.
Meantime always return error code from _add_ublk_dev().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More devices can be created in single tests, so simply remove all
ublk devices in _cleanup_test(), meantime remove the ${dev_id} argument
of _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable zero copy on file backed target, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add file backed ublk target code, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both ublk driver and userspace heavily depends on io_uring subsystem,
and tools/testing/selftests/ should be the best place for holding this
cross-subsystem tests.
Add basic read/write IO test over this ublk null disk, and make sure ublk
working.
More tests will be added.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
