Each of the powerpc selftests runs with a timeout of 2 minutes by
default (see tools/testing/selftests/powerpc/harness.c).
But when tests are run with run_kselftest.sh it uses a timeout of 45
seconds, meaning some tests run OK standalone but fail when run with the
test runner.
So tell run_kselftest.sh to give each test 130 seconds, that should
allow the tests to complete, or be killed by the powerpc test harness
after 2 minutes. If for some reason the harness fails, or for the few
tests that don't use the harness, the 130 second timeout should catch
them if they get stuck.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-2-mpe@ellerman.id.au
Build breaks when executing make with run_tests for sub-folders
under powerpc. This is because, CFLAGS and GIT_VERSION macros are
defined in Makefile of toplevel powerpc folder.
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm'
gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test
hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory
6 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
Fix this by adding the flags.mk in each sub-folder Makefile. Also remove
the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since
the same is definied in flags.mk
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-3-maddy@linux.ibm.com
In some powerpc/ sub-folder Makefiles, CFLAGS are defined before lib.mk
include. Clean it up by re-ordering the flags to follow after the mk
include. This is needed to support sub-folders in powerpc/ buildable on
its own.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-1-maddy@linux.ibm.com
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().
Currently the test fails to build with:
In file included from load_unaligned_zeropad.c:26:
word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
7 | #include <linux/bitops.h>
This is due to the recent changes to the kernel headers.
Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 66a5c40f60 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20240305125644.3315910-1-mpe@ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more
flexibility to GCC.
For that add an entry to the exception table so that
program_check_exception() knowns where to resume execution
after a WARNING.
Here are two exemples. The first one is done on PPC32 (which
benefits from the previous patch), the second is on PPC64.
unsigned long test(struct pt_regs *regs)
{
int ret;
WARN_ON(regs->msr & MSR_PR);
return regs->gpr[3];
}
unsigned long test9w(unsigned long a, unsigned long b)
{
if (WARN_ON(!b))
return 0;
return a / b;
}
Before the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
3c0: 80 63 00 0c lwz r3,12(r3)
3c4: 4e 80 00 20 blr
0000000000000bf0 <.test9w>:
bf0: 7c 89 00 74 cntlzd r9,r4
bf4: 79 29 d1 82 rldicl r9,r9,58,6
bf8: 0b 09 00 00 tdnei r9,0
bfc: 2c 24 00 00 cmpdi r4,0
c00: 41 82 00 0c beq c0c <.test9w+0x1c>
c04: 7c 63 23 92 divdu r3,r3,r4
c08: 4e 80 00 20 blr
c0c: 38 60 00 00 li r3,0
c10: 4e 80 00 20 blr
After the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
0000000000000c50 <.test9w>:
c50: 7c 89 00 74 cntlzd r9,r4
c54: 79 29 d1 82 rldicl r9,r9,58,6
c58: 0b 09 00 00 tdnei r9,0
c5c: 7c 63 23 92 divdu r3,r3,r4
c60: 4e 80 00 20 blr
c70: 38 60 00 00 li r3,0
c74: 4e 80 00 20 blr
In the first exemple, we see GCC doesn't need to duplicate what
happens after the trap.
In the second exemple, we see that GCC doesn't need to emit a test
and a branch in the likely path in addition to the trap.
We've got some WARN_ON() in .softirqentry.text section so it needs
to be added in the OTHER_TEXT_SECTIONS in modpost.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... so that it can be used by others.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit b2d35fa5fc ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.
This broke building all the powerpc selftests with eg:
make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed
Fix it by setting top_srcdir in the affected Makefiles.
Fixes: b2d35fa5fc ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
files not using feature fixup don't need asm/feature-fixups.h
files using feature fixup need asm/feature-fixups.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.
In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.
Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.
And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This halves the exception table size on 64-bit builds, and it allows
build-time sorting of exception tables to work on relocated kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Minor asm fixups and bits to keep the selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This macro is taken from s390, and allows more flexibility in
changing exception table format.
mpe: Put it in ppc_asm.h and only define one version using
stringinfy_in_c(). Add some empty definitions and headers to keep the
selftests happy.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the result returned by load_unaligned_zeropad() doesn't match what we
expect we should fail the test!
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the load unaligned zeropad test takes a SEGV which can't be handled,
we increment segv_error, print the offending NIP and then return without
taking any further action. In almost all cases this means we'll just
take the SEGV again, and loop eternally spamming the console.
Instead just abort(), it's a fatal error in the test. The test harness
will notice that the child died and print a nice message for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 7a5692e6e5 ("arch/powerpc: provide zero_bytemask() for
big-endian") added a call to __fls() in our word-at-a-time.h. That was
fine for the kernel build but missed the fact that we also use
word-at-a-time.h in a userspace test.
Pulling in the kernel version of __fls() gets messy, so just define our
own, it's unlikely to change often.
Fixes: 7a5692e6e5 ("arch/powerpc: provide zero_bytemask() for big-endian")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bulk of the selftests are actually below the powerpc sub directory.
This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.
This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It is a rarely exercised case, so we want to have a test to ensure it
works as required.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
