Previously arch_support_sort_key and arch_perf_header_entry used a
weak symbol to compile as appropriate for x86 and powerpc. A
limitation to this is that the handling of a data file could vary in
cross-platform development. Change to using the perf_env of the
current session to determine the architecture kind and set the sort
key and header entries as appropriate.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-23-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By definition arch sample parsing and synthesis will inhibit certain
kinds of cross-platform record then analysis (report, script,
etc.). Remove arch_perf_parse_sample_weight and
arch_perf_synthesize_sample_weight replacing with a common
implementation. Combine perf_sample p_stage_cyc and retire_lat as
weight3 to capture the differing uses regardless of compiled for
architecture.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The dso_id previously contained the major, minor, inode and inode
generation information from a mmap2 event - the inode generation would
be zero when reading from /proc/pid/maps. The build_id was in the
dso. With build ID mmap2 events these fields wouldn't be initialized
which would largely mean the special empty case where any dso would
match for equality. This isn't desirable as if a dso is replaced we
want the comparison to yield a difference.
To support detecting the difference between DSOs based on build_id,
move the build_id out of the DSO and into the dso_id. The dso_id is
also stored in the DSO so nothing is lost. Capture in the dso_id what
parts have been initialized and rename dso_id__inject to
dso_id__improve_id so that it is clear the dso_id is being improved
upon with additional information. With the build_id in the dso_id, use
memcmp to compare for equality.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sometimes we need to analyze the data in process level but current sort
keys only work on thread level. Let's add 'tgid' sort key for that as
'pid' is already taken for thread.
This will look mostly the same, but it only uses tgid instead of tid.
Here's an example of a process with two threads (thloop).
$ perf record -- perf test -w thloop
$ perf report --stdio -s tgid,pid -H
...
#
# Overhead Tgid:Command / Pid:Command
# ........... ..........................
#
100.00% 2018407:perf
50.34% 2018407:perf
49.66% 2018409:perf
Suggested-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250509210421.197245-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a breakdown of perf_mem_data_src.mem_lvl_num. But it's also
divided into two parts because the combination is bigger than 8.
Since there are many entries for different cache levels, 'cache' field
focuses on them. I generalized buffers like LFB, MAB and MHB to L1-buf
and L2-buf.
The rest goes to 'memory' field which can be RAM, CXL, PMEM, IO, etc.
$ perf mem report -F cache,mem,dso --stdio
...
#
# -------------- Cache -------------- --- Memory ---
# L1 L2 L3 L1-buf Other RAM Other Shared Object
# ................................... .............. ....................................
#
53.9% 3.6% 16.2% 21.6% 4.8% 4.8% 95.2% [kernel.kallsyms]
64.7% 1.7% 3.5% 17.4% 12.8% 12.8% 87.2% chrome (deleted)
78.3% 2.8% 0.0% 1.0% 17.9% 17.9% 82.1% libc.so.6
39.6% 1.5% 0.0% 5.7% 53.2% 53.2% 46.8% libxul.so
26.2% 0.0% 0.0% 0.0% 73.8% 73.8% 26.2% [unknown]
85.5% 0.0% 0.0% 14.5% 0.0% 0.0% 100.0% libspa-audioconvert.so
66.3% 4.4% 0.0% 29.4% 0.0% 0.0% 100.0% libglib-2.0.so.0.8200.1 (deleted)
1.9% 0.0% 0.0% 0.0% 98.1% 98.1% 1.9% libmutter-cogl-15.so.0.0.0 (deleted)
10.6% 0.0% 0.0% 89.4% 0.0% 0.0% 100.0% libpulsecommon-16.1.so
0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 100.0% libfreeblpriv3.so (deleted)
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is an actual example of the he_mem_stat based sample breakdown. It
uses 'mem_op' field of union perf_mem_data_src which means memory
operations.
It'd have basically 'load' or 'store' which can be useful if PMU doesn't
have separate events for them like IBS or SPE. In addition, there's an
entry in case load and store happen at the same time. Also adds entries
for prefetching and execution.
$ perf mem report -F +op -s comm --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'ibs_op//'
# Total weight : 9559
# Sort order : comm
#
# --------------------- Mem Op ----------------------
# Overhead Samples Load Store Ld+St Pfetch Exec Other N/A N/A Command
# ........ ....... ................................................... ...............
#
44.85% 4077 21.1% 30.7% 0.0% 0.0% 0.0% 48.3% 0.0% 0.0% swapper
26.82% 45 98.8% 0.3% 0.0% 0.0% 0.0% 0.9% 0.0% 0.0% netsli-prober
7.19% 442 51.7% 13.7% 0.0% 0.0% 0.0% 34.6% 0.0% 0.0% perf
5.81% 75 89.7% 2.2% 0.0% 0.0% 0.0% 8.1% 0.0% 0.0% qemu-system-ppc
4.77% 1 100.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% notifications_c
1.77% 10 95.9% 1.2% 0.0% 0.0% 0.0% 3.0% 0.0% 0.0% MemoryReleaser
0.77% 32 71.6% 4.1% 0.0% 0.0% 0.0% 24.3% 0.0% 0.0% DefaultEventMan
0.19% 10 66.7% 22.2% 0.0% 0.0% 0.0% 11.1% 0.0% 0.0% gnome-shell
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for later changes to support mem_stat output. The
new fields will need two lines for the header - the first line will show
type of mem stat and the second line will show the name of each item
which is returned by mem_stat_name().
Each element in the mem_stat array will be printed in percentage for the
hist_entry and their sum would be 100%.
Add new output field dimension only for SORT_MODE__MEM using mem_stat.
To handle possible name conflict with existing sort keys, move the order
of checking output field dimensions after the sort dimensions when it
looks for sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a logic to account he->mem_stat based on mem_stat_type in hists.
Each mem_stat entry will have different meaning based on the type so the
index in the array is calculated at runtime using the corresponding
value in the sample.data_src.
Still hists has no mem_stat_types yet so this code won't work for now.
Later hists->mem_stat_types will be allocated based on what users want
in the output actually.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support multi-line headers in 'perf mem report'.
Normal sort keys and output fields that don't have contents for multi-
line will print the header string at the last line only.
As we don't use multi-line headers normally, it should not have any
changes in the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It turns out that the output fields didn't consider the hierarchy mode
and put all the fields in the same level. To support hierarchy, each
non-output field should be in a separate level.
Pass a pointer to level to output_field_add() and make it increase the
level when it sees non-output fields.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250331073722.4695-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for hierarchy output mode where the first level is
considered as output fields. We want them in the same level so that it
can show only the remaining groups in the hierarchy.
Before:
$ perf report -s overhead,sample,period,comm,dso -H --stdio
...
# Overhead Samples / Period / Command / Shared Object
# ................. ..........................................
#
100.00% 4035
100.00% 3835883066
100.00% perf
99.37% perf
0.50% ld-linux-x86-64.so.2
0.06% [unknown]
0.04% libc.so.6
0.02% libLLVM-16.so.1
After:
$ perf report -s overhead,sample,period,comm,dso -H --stdio
...
# Overhead Samples Period Command / Shared Object
# ....................................... .......................
#
100.00% 4035 3835883066 perf
99.37% 4005 3811826223 perf
0.50% 19 19210014 ld-linux-x86-64.so.2
0.06% 8 2367089 [unknown]
0.04% 2 1720336 libc.so.6
0.02% 1 759404 libLLVM-16.so.1
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307080829.354947-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Factor out a function to get the name of member field at the given
offset. This will be used in other places.
Also update the output of typeoff sort key a little bit. As we know
that some special types like (stack operation), (stack canary) and
(unknown) won't have fields, skip printing the offset and field.
For example, the following change is expected.
"(stack operation) +0 (no field)" ==> "(stack operation)"
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add record/report --latency flag that allows to capture and show
latency-centric profiles rather than the default CPU-consumption-centric
profiles. For latency profiles record captures context switch events,
and report shows Latency as the first column.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/e9640464bcbc47dde2cb557003f421052ebc9eec.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Latency output field is similar to overhead, but represents overhead for
latency rather than CPU consumption. It's re-scaled from overhead by dividing
weight by the current parallelism level at the time of the sample.
It effectively models profiling with 1 sample taken per unit of wall-clock
time rather than unit of CPU time.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/b6269518758c2166e6ffdc2f0e24cfdecc8ef9c1.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add parallelism filter that can be used to look at specific parallelism
levels only. The format is the same as cpu lists. For example:
Only single-threaded samples: --parallelism=1
Low parallelism only: --parallelism=1-4
High parallelism only: --parallelism=64-128
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/e61348985ff0a6a14b07c39e880edbd60a8f8635.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add an accessor function for tp_format. Rather than search+replace
uses try to use a variable and reuse it. Add additional NULL checks
when accessing/using the value. Make sure the PTR_ERR is nulled out on
error path in evsel__newtp_idx.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original commit message:
"
Use current sort mechanism but the real .se_cmp() just returns 0 so
that new columns "Predicted", "Abort" and "Cycles" are created in display
but actually these keys are not the sort keys.
For example:
Overhead Source:Line Symbol Shared Object Predicted Abort Cycles
........ ............ ........ ............. ......... ..... ......
38.25% div.c:45 [.] main div 97.6% 0 3
"
Update missed commit from series "perf report: Show branch flags/cycles
in --branch-history callgraph view" to apply to current repository so that
new columns described above are visible.
Link to original series:
https://lore.kernel.org/lkml/1477876794-30749-1-git-send-email-yao.jin@linux.intel.com/
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20241010184046.203822-1-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some sort keys are meaningful only in a specific mode - like branch
stack and memory (data-src). Add the mode to skip unnecessary ones.
This will be used for 'perf mem report' later.
While at it, change the prefix for the -F/--fields option to remove
the duplicate part.
Before:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead period sample overhead overhead_sys
overhead_us overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
After:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead overhead_sys overhead_us
overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
Add reference count checking and switch 'struct mem_info' usage to use
accessor functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move mem-info to its own header rather than having it split between
mem-events and symbol.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support data type annotation with new --data-type option. It internally
uses type sort key to collect sample histogram for the type and display
every members like below.
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
For simplicity it prints the number of samples per field for now.
But it should be easy to show the overhead percentage instead.
The number at the outer struct is a sum of the numbers of the inner
members. For example, struct cfs_rq got total 13 samples, and 2 came
from the load (struct load_weight) and 1 from h_nr_running. Similarly,
the struct load_weight got total 2 samples and they all came from the
weight field.
I've added two new flags in the symbol_conf for this. The
annotate_data_member is to get the members of the type. This is also
needed for perf report with typeoff sort key. The annotate_data_sample
is to update sample stats for each offset and used only in annotate.
Currently it only support stdio output mode, TUI support can be added
later.
Committer testing:
With the perf.data from the previous csets, a very simple, short
duration one:
# perf annotate --data-type
Annotate type: 'struct list_head' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 16 struct list_head {
0 0 8 struct list_head* next;
1 8 8 struct list_head* prev;
};
Annotate type: 'char' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 1 char ;
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add child member field if the current type is a composite type like a
struct or union. The member fields are linked in the children list and
do the same recursively if the child itself is a composite type.
Add 'self' member to the annotated_data_type to handle the members in
the same way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cycles info is only meaningful when sample has branch stacks. To
save the memory for normal cases, move those fields to a new 'struct
annotated_branch' and dynamically allocate it when needed. Also move
cycles_hist from annotated_source as it's related here.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231103191907.54531-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Comparing pointers with reference count checking is tricky to avoid a
SEGV. Add a convenience macro to simplify and use.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This is a string constant that gets returned and then strcmp() around,
we can instead just do a pointer comparision.
That requires a new global variable to comply with these warnings from
some versions of clang and gcc:
41 68.95 fedora:rawhide : FAIL clang version 16.0.4 (Fedora 16.0.4-1.fc39)
result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare]
if (start_line != SRCLINE_UNKNOWN &&
^ ~~~~~~~~~~~~~~~ 41
Ack comments:
Agreed, the strcmps make me nervous as they won't distinguish heap from
a global meaning we could end up with things like pointers to freed
memory. The comparison with the global is always going to be same imo.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/lkml/ZIcoJytUEz4UgQYR@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify struct declaration and accessor functions for the reference
count checkers additional layer of indirection. Make sure pid_cmp in
builtin-sched.c uses the underlying/original struct in pointer
arithmetic, and not the temporary get/put indirection.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using accessors will make it easier to add reference count checking in
later patches.
Committer notes:
thread->nsinfo wasn't wrapped as it is used together with
nsinfo__zput(), where does a trick to set the field with a refcount
being dropped to NULL, and that doesn't work well with using
thread__nsinfo(thread), that loses the &thread->nsinfo pointer.
When refcount checking is added to 'struct thread', later in this
series, nsinfo__zput(RC_CHK_ACCESS(thread)->nsinfo) will be used to
check the thread pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes the logic a bit clear by avoiding the !strcmp() pattern and
also a way to intercept the pointer if we need to do extra validation on
it or to do lazy setting of evsel->name via evsel__name(evsel).
Reviewed-by: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZEGLM8VehJbS0gP2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark noticed that the recent 63df0e4bc3 ("perf map: Add
accessor for dso") patch accessed map->dso before the 'map' variable was
NULL checked, which is a change in logic that leads to segmentation
faults, so comb thru that patch to fix similar cases.
Fixes: 63df0e4bc3 ("perf map: Add accessor for dso")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/ZD68RYCVT8hqPuxr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Addresses of two data structure members were determined before
corresponding null pointer checks in the implementation of the function
“sort__sym_from_cmp”.
Thus avoid the risk for undefined behaviour by removing extra
initialisations for the local variables “from_l” and “from_r” (also
because they were already reassigned with the same value behind this
pointer check).
This issue was detected by using the Coccinelle software.
Fixes: 1b9e97a2a9 ("perf tools: Fix report -F symbol_from for data without branch info")
Signed-off-by: <elfring@users.sourceforge.net>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later changes will add reference count checking for 'struct map'. Add an
accessor so that the reference count check is only necessary in one
place.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230404205954.2245628-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later changes will add reference count checking for struct map, add a
helper function to invoke the map_ip and unmap_ip function pointers. The
helper allows the reference count check to be in fewer places.
Committer notes:
Add missing conversions to:
tools/perf/util/map.c
tools/perf/util/cs-etm.c
tools/perf/util/annotate.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/arch/s390/annotate/instructions.c
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230404205954.2245628-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check is only necessary in one place.
Additional changes:
- add a dso variable to avoid repeated map__dso calls.
- in builtin-mem.c dump_raw_samples, code only partially tested for
dso == NULL. Make the possibility of NULL consistent.
- in thread.c thread__memcpy fix use of spaces and use tabs.
Committer notes:
Did missing conversions on these files:
tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/gtk/annotate.c
tools/perf/util/cs-etm.c
tools/perf/util/thread.c
tools/perf/util/unwind-libunwind-local.c
tools/perf/util/unwind-libunwind.c
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320212248.1175731-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce functions to access struct maps. These functions reduce the
number of places reference counting is necessary. While tidying APIs do
some small const-ification, in particlar to unwind_libunwind_ops.
Committer notes:
Fixed up tools/perf/util/unwind-libunwind.c:
- return ops->get_entries(cb, arg, thread, data, max_stack);
+ return ops->get_entries(cb, arg, thread, data, max_stack, best_effort);
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320212248.1175731-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The earlier commit f0cdde28fe ("perf hist: Improve srcfile sort
key performance") updated the srcfile logic but missed to change the
->cmp() callback which is called for every sample.
It should use the same logic like in the srcline to speed up the
processing because it'd return the same information repeatedly for the
same address. The real processing will be done in
sort__srcfile_collapse().
Fixes: f0cdde28fe ("perf hist: Improve srcfile sort key performance")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230323025005.191239-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'simd' sort field to visualize SIMD ops in 'perf report'.
Rows are labeled with the SIMD ISA, and the type of predicate (if any):
- [p] partial predicate
- [e] empty predicate (no elements in the vector being used)
Example with Arm SPE and SVE (Scalable Vector Extension):
#include <arm_sve.h>
double src[1025], dst[1025];
int main(void) {
svfloat64_t vc = svdup_f64(1);
for(;;)
for(int i = 0; i < 1025; i += svcntd())
{
svbool_t pg = svwhilelt_b64(i, 1025);
svfloat64_t vsrc = svld1(pg, &src[i]);
svfloat64_t vdst = svadd_x(pg, vsrc, vc);
svst1(pg, &dst[i], vdst);
}
return 0;
}
... compiled using "gcc-11 -march=armv8-a+sve -O3"
Profiling on a platform that implements FEAT_SVE and FEAT_SPEv1p1:
$ perf record -e arm_spe_0// -- ./a.out
$ perf report --itrace=i1i -s overhead,pid,simd,sym
Overhead Pid:Command Simd Symbol
........ ................ ....... ......................
53.76% 10758:program [.] main
46.14% 10758:program [.] SVE [.] main
0.09% 10758:program [p] SVE [.] main
The report shows 0.09% of the sampled SVE operations use partial
predicates due to src and dst arrays not being multiples of the vector
register lengths.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230320151509.1137462-2-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many platforms have feature of adjacent cachelines prefetch, when it is
enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if
one is fetched to cache, the other one could likely be fetched too,
which sort of extends the cacheline size to double, thus the false
sharing could happens in adjacent cachelines.
0Day has captured performance changed related with this [1], and some
commercial software explicitly makes its hot global variables 128 bytes
aligned (2 cache lines) to avoid this kind of extended false sharing.
So add an option "--double-cl" for 'perf c2c report' to show false
sharing in double cache line granularity, which acts just like the
cacheline size is doubled. There is no change to c2c record. The
hardware events of shared cacheline are still per cacheline, and this
option just changes the granularity of how events are grouped and
displayed.
In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case
on old kernel):
----------------------------------------------------------------------
26 31 2 0 0 0 0xffff888103ec6000
----------------------------------------------------------------------
35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm
6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge
25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm
19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge
9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge
3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch
The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are
listed together to give users a hint of extended false sharing.
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Committer notes:
Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx
Removed -a, leaving just as --double-cl, as this probably is not used so
frequently and perhaps will be even auto-detected if we manage to record
the MSR where this is configured.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
