Always use the perf_env from the feat_fd's perf_header. Cache the
value on entry to a function in `env` and use `env->` consistently in
the code. Ensure the header is initialized for use in
perf_session__do_write_header.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The session holds a perf_env pointer env. In UI code container_of is
used to turn the env to a session, but this assumes the session
header's env is in use. Rather than a dubious container_of, hold the
session in the evlist and derive the env from the session with
evsel__env, perf_session__env, etc.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pass in a size argument rather than implying all build id strings must
be SBUILD_ID_SIZE.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-4-irogers@google.com
[ fixed some build errors ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
own_cpus is generally the cpumask from the PMU. Rename to pmu_cpus to
try to make this clearer. Variable rename with no other changes.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The pipe mode header dumping was accidentally removed when tracing of
header feature events in pipe mode was added.
Minor spelling tweak to header test failure message.
Fixes: 61051f9a84 ("perf header: In pipe mode dump features without --header/-I")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250703042000.2740640-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The perf.data file may contain a bpf_prog_info or bpf_btf feature. If
the contents of these are empty then nothing is displayed. Rather than
display nothing and not account for the file space, display an empty
message.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250617223356.2752099-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This collects metadata for any BPF programs that were loaded during a
"perf record" run, and emits it at the end of the run.
Signed-off-by: Blake Jones <blakejones@google.com>
Link: https://lore.kernel.org/r/20250612194939.162730-4-blakejones@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It is possible for systems to have a greater socket id number than the
number of cpus present on a machine, so this test is obselete and should
be removed.
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250618142921.4053400-2-ashelat@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The env.pmu_mapping can be leaked when it reads data from a pipe on AMD.
For a pipe data, it reads the header data including pmu_mapping from
PERF_RECORD_HEADER_FEATURE runtime. But it's already set in:
perf_session__new()
__perf_session__new()
evlist__init_trace_event_sample_raw()
evlist__has_amd_ibs()
perf_env__nr_pmu_mappings()
Then it'll overwrite that when it processes the HEADER_FEATURE record.
Here's a report from address sanitizer.
Direct leak of 2689 byte(s) in 1 object(s) allocated from:
#0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98
#1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64
#2 0x5595a7d414ef in strbuf_init util/strbuf.c:25
#3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362
#4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517
#5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315
#6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23
#7 0x5595a7d7f893 in __perf_session__new util/session.c:179
#8 0x5595a7b79572 in perf_session__new util/session.h:115
#9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603
#10 0x5595a7c019eb in run_builtin perf.c:351
#11 0x5595a7c01c92 in handle_internal_command perf.c:404
#12 0x5595a7c01deb in run_argv perf.c:448
#13 0x5595a7c02134 in main perf.c:556
#14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Let's free the existing pmu_mapping data if any.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch memory_node__read and build_mem_topology from opendir/readdir
to io_dir__readdir, with smaller stack allocations. Reduces peak
memory consumption of perf record by 10kb.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250222061015.303622-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Function __perf_env__insert_bpf_prog_info() will return without inserting
bpf prog info node into perf env again due to a duplicate bpf prog info
node insertion, causing the temporary info_linear and info_node memory to
leak. Modify the return type of this function to bool and add a check to
ensure the memory is freed if the function returns false.
Fixes: 606f972b13 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-3-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If __perf_env__insert_btf() returns false due to a duplicate btf node
insertion, the temporary node will leak. Add a check to ensure the memory
is freed if the function returns false.
Fixes: a70a112317 ("perf bpf: Save BTF information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-2-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM the cpuid is dependent on the core type of the CPU in
question. The PMU was passed for the sake of the CPU map but this
means in places a temporary PMU is created just to pass a CPU
value. Just pass the CPU and fix up the callers.
As there are no longer PMU users in header.h, shuffle forward
declarations earlier to work around build failures.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ARM BIG.little has no notion of a constant CPUID for both core
types. To reflect this reality, change the get_cpuid function to also
pass in a possibly unused logical cpu.
If the dummy value (-1) is passed in then ARM can, as currently happens,
select the first logical CPU's "CPUID".
The changes to ARM getcpuid happen in a follow up change.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The helper function is only used in the NUMA benchmark as typically
online CPUs are determined through perf_cpu_map__new_online_cpus().
Reduce the scope of the function for now.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No longer used by `perf inject` the repipe_fd is always -1 and repipe
is always false. Remove the options and associated code knowing the
constant values of the removed variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously inject->is_pipe was set if the input or output were a
pipe. Determining the input was a pipe had to be done prior to
starting the session and opening the file. This was done by comparing
the input file name with '-' but it fails if the pipe file is written
to disk.
Opening a pipe file from disk will correctly set perf_data.is_pipe, but
this is too late for 'perf inject' and results in a broken file. A
workaround is 'cat pipe_perf|perf inject -i - ...'.
This change removes inject->is_pipe and changes the dependent
conditions to use the is_pipe flag on the input
(inject->session->data) and output files (inject->output). This
ensures the is_pipe condition reflects things like the header being
read.
The change removes the use of perf file header repiping, that is
writing the file header out while reading it in. The case of input
pipe and output file cannot repipe as the attributes for the file are
unknown. To resolve this, write the file header when writing to disk
and as the attributes may be unknown, write them after the data.
Update sessions repipe variable to be trace_event_repipe as those are
the only events now impacted by it. Update __perf_session__new as the
repipe_fd no longer needs passing. Fully removing repipe from session
header reading will be done in a later change.
Committer testing:
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x562fc2560a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: Create an archive with symtabs to analyse on other machine: perf archive)
#
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 > pipe.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
root@number:~# perf report --stdio -i pipe.data
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x55f775975a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: To set sampling period of individual events use perf record -e cpu/cpu-cycles,period=100001/,cpu/branches,period=10001/ ...)
#
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With a file, to write data an offset needs to be known. Typically data
follows the event attributes in a file.
However, if processing a pipe the number of event attributes may not be
known.
It is convenient in that case to write the attributes after the data.
Expand perf_session__do_write_header() to allow this when the data
offset and size are known.
This approach may be useful for more than just taking a pipe file to
write into a data file, `perf inject --itrace` will reserve and
additional 8kb for attributes, which would be unnecessary if the
attributes were written after the data.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Buggy perf.data files can have the attributes and data
overlapping.
For example, when processing pipe data the attributes aren't known and
so file offset header calculations can consider them not present.
Later this can cause the attributes to overwrite the data. This can be
seen in:
$ perf record -o - true > a.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.059 MB - ]
$ perf inject -i a.data -o b.data
$ perf report --stats -i b.data
0x68 [0]: failed to process type: 510379 [Invalid argument]
Error:
failed to process sample
$
This change makes reading the corrupt file fail:
$ perf report --stats -i b.data
Perf file header corrupt: Attributes and data overlap
incompatible file format (rerun with -v to learn more)
$
Which is more informative.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dump the raw trace by `perf report -D` ASan reports a memory
leakage in perf_event__fprintf_event_update().
It shows that we allocated a temporary cpumap for dumping the CPUs but
doesn't release it and it's not used elsewhere. Fix this by free the
cpumap after the dumping.
Fixes: c853f9394b ("perf tools: Add perf_event__fprintf_event_update function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20231207081635.8427-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not increase the node count unless a node has been successfully read,
because it can lead to a segfault if an error occurs.
For example, if perf exceeds the open file limit in memory_node__read(),
which, on a test system, could be made to happen by setting the file limit
to exactly 32:
Before:
$ ulimit -n 32
$ perf mem record --all-user -- sleep 1
[ perf record: Woken up 1 times to write data ]
failed: can't open memory sysfs data
perf: Segmentation fault
Obtained 14 stack frames.
perf(sighandler_dump_stack+0x48) [0x55f4b1f59558]
/lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7f4ba1c42520]
/lib/x86_64-linux-gnu/libc.so.6(free+0x1e) [0x7f4ba1ca53fe]
perf(+0x178ff4) [0x55f4b1f48ff4]
perf(+0x179a70) [0x55f4b1f49a70]
perf(+0x17ef5d) [0x55f4b1f4ef5d]
perf(+0x85c0b) [0x55f4b1e55c0b]
perf(cmd_record+0xe1d) [0x55f4b1e5920d]
perf(cmd_mem+0xc96) [0x55f4b1e80e56]
perf(+0x130460) [0x55f4b1f00460]
perf(main+0x689) [0x55f4b1e427d9]
/lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f4ba1c29d90]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f4ba1c29e40]
perf(_start+0x25) [0x55f4b1e42a25]
Segmentation fault (core dumped)
$
After:
$ ulimit -n 32
$ perf mem record --all-user -- sleep 1
[ perf record: Woken up 1 times to write data ]
failed: can't open memory sysfs data
[ perf record: Captured and wrote 0.005 MB perf.data (11 samples) ]
$
Fixes: f8e502b9d1 ("perf header: Ensure bitmaps are freed")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
x86 core PMU exposes supported maximum precision level via max_precise
PMU capability. Although, AMD core PMU does not support precise mode,
certain core PMU events with precise_ip > 0 are allowed and forwarded to
IBS OP PMU.
Display a note about this in the 'perf report' header output and
document the details in the perf-list man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231107083331.901-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support the branch counters feature, the information of the maximum
number of supported counters and the width of the counters is exposed in
the sysfs caps folder. The perf tool can use the information to parse
the logged counters in each branch.
Store the information in the perf_env for later usage.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tinghao Zhang <tinghao.zhang@intel.com>
Link: https://lore.kernel.org/r/20231025201626.3000228-7-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory leaks were detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-19-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Instead of accessing the attr.id directly, use the
perf_record_header_attr_id() helper to handle old versions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230825152552.112913-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs. The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.
n_ids = (total_record_size - end_of_the_attr_field) / sizeof(u64)
This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later. And it becomes a problem if there
is a change in attr size between the record and report.
$ perf record -o- > perf-pipe.data # old version
$ perf report -i- < perf-pipe.data # new version
For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
128 byte: perf event attr { .size = 128, ... },
32 byte: event IDs [] = { 1234, 1235, 1236, 1237 },
But when report later, it thinks the attr size is 136 then it only read
the last 3 entries as ID.
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
136 byte: perf event attr { .size = 136, ... },
24 byte: event IDs [] = { 1235, 1236, 1237 }, // 1234 is missing
So it should use the recorded version of the attr. The attr has the
size field already then it should honor the size when reading data.
Fixes: 2c46dbb517 ("perf: Convert perf header attrs into attr events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825152552.112913-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define these macros so that the CPU name can be displayed when running
'perf report' and 'perf timechart'.
Committer notes:
No need to have:
if (strcasestr(buf, "Model Name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
} else if (strcasestr(buf, "model name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
}
As the point of strcasestr() is to be case insensitive to both the
haystack and the needle, so simplify the above to just:
if (strcasestr(buf, "model name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
}
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/db968a186a10e4629fe10c26a1210f7126ad41ec.1692962043.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMU caps are written as HEADER_PMU_CAPS or for the special case of the
PMU "cpu" as HEADER_CPU_PMU_CAPS. As the PMU "cpu" is special, and not
any "core" PMU, the logic had become broken and core PMUs not called
"cpu" were not having their caps written.
This affects ARM and s390 non-hybrid PMUs.
Simplify the PMU caps writing logic to scan one fewer time and to be
more explicit in its behavior.
Fixes: 178ddf3bad ("perf header: Avoid hybrid PMU list in write_pmu_caps")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel-pt tests were failing:
-- Test virtual LBR ---
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.126 MB /tmp/perf-test-intel-pt-sh.FW57CXnCqQ/test-perf.data ]
Failed with virtual lbr
...
```
The root cause is an out-of-bounds read in header (where maxbrstack.py
is from test_intel_pt.sh):
```
$ perf --no-pager script --itrace=L -s maxbrstack.py
=================================================================
==3907930==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000095a8 at pc 0x563c26c840bb bp 0x7fff43582710 sp 0x7fff43582708
READ of size 4 at 0x6020000095a8 thread T0
#0 0x563c26c840ba in process_group_desc util/header.c:2847
#1 0x563c26c8bc78 in perf_file_section__process util/header.c:4037
#2 0x563c26c8aa9b in perf_header__process_sections util/header.c:3813
#3 0x563c26c8d028 in perf_session__read_header util/header.c:4286
#4 0x563c26cbab29 in perf_session__open util/session.c:113
#5 0x563c26cbb3d0 in __perf_session__new util/session.c:221
#6 0x563c26aacb14 in perf_session__new util/session.h:73
#7 0x563c26acf7f1 in cmd_script tools/perf/builtin-script.c:4212
#8 0x563c26bb58ff in run_builtin tools/perf/perf.c:323
#9 0x563c26bb5e70 in handle_internal_command tools/perf/perf.c:377
#10 0x563c26bb6238 in run_argv tools/perf/perf.c:421
#11 0x563c26bb67a0 in main tools/perf/perf.c:537
#12 0x7f34bde46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#13 0x7f34bde46244 in __libc_start_main_impl ../csu/libc-start.c:381
#14 0x563c26a33390 in _start (/tmp/perf/perf+0x1eb390)
0x6020000095a8 is located 8 bytes to the right of 16-byte region [0x602000009590,0x6020000095a0)
allocated by thread T0 here:
#0 0x7f34beeb83b7 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:77
#1 0x563c26c83df8 in process_group_desc util/header.c:2824
#2 0x563c26c8bc78 in perf_file_section__process util/header.c:4037
#3 0x563c26c8aa9b in perf_header__process_sections util/header.c:3813
#4 0x563c26c8d028 in perf_session__read_header util/header.c:4286
#5 0x563c26cbab29 in perf_session__open util/session.c:113
#6 0x563c26cbb3d0 in __perf_session__new util/session.c:221
#7 0x563c26aacb14 in perf_session__new util/session.h:73
#8 0x563c26acf7f1 in cmd_script tools/perf/builtin-script.c:4212
#9 0x563c26bb58ff in run_builtin tools/perf/perf.c:323
#10 0x563c26bb5e70 in handle_internal_command tools/perf/perf.c:377
#11 0x563c26bb6238 in run_argv tools/perf/perf.c:421
#12 0x563c26bb67a0 in main tools/perf/perf.c:537
#13 0x7f34bde46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
```
Avoid the out-of-bounds read checking for the leader. Leave the 'nr'
check intact as nr will be 0 or the counting down and evsel be a group
member.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/lkml/20230608232823.4027869-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
memory_node bitmaps need a bitmap_free to avoid memory leaks. Caught
by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid a large static array, dynamically allocate the nodes avoiding a
hard coded limited as well.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230526183401.2326121-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_pmus__has_hybrid was used to detect when there was >1 core PMU,
this can be achieved with perf_pmus__num_core_pmus that doesn't depend
upon is_pmu_hybrid and PMU name comparisons. When modifying the
function calls take the opportunity to improve comments,
enable/simplify tests that were previously failing for hybrid but now
pass and to simplify generic code.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-34-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Scanning all PMUs is expensive as all PMUs sysfs entries are loaded,
benchmarking shows more than 4x the cost:
```
$ perf bench internals pmu-scan -i 1000
Computing performance of sysfs PMU event scan for 1000 times
Average core PMU scanning took: 989.231 usec (+- 1.535 usec)
Average PMU scanning took: 4309.425 usec (+- 74.322 usec)
```
Add new perf_pmus__scan_core routine that scans just core
PMUs. Replace perf_pmus__scan calls with perf_pmus__scan_core when
non-core PMUs are being ignored.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-30-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate and hide the pmus list in pmus.[ch]. Move pmus functionality
out of pmu.[ch] into pmus.[ch] renaming pmus functions which were
prefixed perf_pmu__ to perf_pmus__.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-28-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid perf_pmu__for_each_hybrid_pmu by iterating all PMUs are dumping
the core ones. This will eventually allow removal of the hybrid PMU
list.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
build_caches() builds the complete cache topology of the system by
iterating over all CPU, building and comparing cache levels of each CPU,
keeping only the unique ones at the end.
Extract the unit that build the cache levels for a single CPU into a
separate function. Expose this function, and the MAX_CACHE_LVL value to
be used elsewhere in perf too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-2-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Maintaining the number of groups during event parsing is problematic
and since changing to sort/regroup events can only be computed by a
linear pass over the evlist. As the value is generally only used in
tests, rather than hold it in a variable compute it by passing over
the evlist when necessary.
This change highlights that libpfm's counting of groups with a single
entry disagreed with regular event parsing. The libpfm tests are
updated accordingly.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230312021543.3060328-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without
affecting users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: alexandru elisei <alexandru.elisei@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: kvmarm@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20221119013450.2643007-6-seanjc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible for casts to introduce alignment issues, prefer a union
for perf_record_event_update.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To update the perf/core codebase.
Fix conflict by moving arch__post_evsel_config(evsel, attr) to the end
of evsel__config(), after what was added in:
49c692b7df ("perf offcpu: Accept allowed sample types only")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.
This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
