Start the creation of a tracepoint PMU abstraction. Tracepoint events
don't follow the regular sysfs perf conventions. Eventually the new
PMU abstraction will bridge the gap so tracepoint events look more
like regular perf ones.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250725185202.68671-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By definition arch sample parsing and synthesis will inhibit certain
kinds of cross-platform record then analysis (report, script,
etc.). Remove arch_perf_parse_sample_weight and
arch_perf_synthesize_sample_weight replacing with a common
implementation. Combine perf_sample p_stage_cyc and retire_lat as
weight3 to capture the differing uses regardless of compiled for
architecture.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The global perf_env was used for the host, but if a perf_env wasn't
easy to come by it was used in a lot of places where potentially
recorded and host data could be confused. Remove the global variable
as now the majority of accesses retrieve the perf_env for the host
from the session.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-20-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The session holds a perf_env pointer env. In UI code container_of is
used to turn the env to a session, but this assumes the session
header's env is in use. Rather than a dubious container_of, hold the
session in the evlist and derive the env from the session with
evsel__env, perf_session__env, etc.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add evsel__open_per_cpu_and_thread that combines the operation of
evsel__open_per_cpu and evsel__open_per_thread so that an event
without the "any" cpumask can be opened with its cpumask and with
threads it specifies. Change the implementation of evsel__open_per_cpu
and evsel__open_per_thread to use evsel__open_per_cpu_and_thread to
make the implementation of those functions clearer.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid the duplicated code and better enable perf_evsel to change.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
own_cpus is generally the cpumask from the PMU. Rename to pmu_cpus to
try to make this clearer. Variable rename with no other changes.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Factor requested CPU warning out of evlist and into evsel. At the end
of adding an event, perform the warning check. To avoid repeatedly
testing if the cpu_list is empty, add a local variable.
```
$ perf stat -e cpu_atom/cycles,cpu=1/ -a true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cpu_atom/cycles/'
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
0.000781511 seconds time elapsed
```
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It uses evsel->priv to save per-cpu timing information. It should be
freed when the evsel is released.
Add the priv destructor for evsel same as thread to handle that.
Fixes: 49394a2a24 ("perf sched timehist: Introduce timehist command")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
DRM clients expose information through usage stats as documented in
Documentation/gpu/drm-usage-stats.rst (available online at
https://docs.kernel.org/gpu/drm-usage-stats.html). Add a tool like
PMU, similar to the hwmon PMU, that exposes DRM information. For
example on a tigerlake laptop:
```
$ perf list drm
List of pre-defined events (to be used in -e or -M):
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
drm-engine-video-enhance
[Utilization in ns. Unit: drm_i915]
drm-purgeable-stolen-system0
[Size of resident and purgeable memory bufers. Unit: drm_i915]
drm-purgeable-system0
[Size of resident and purgeable memory bufers. Unit: drm_i915]
drm-resident-stolen-system0
[Size of resident memory bufers. Unit: drm_i915]
drm-resident-system0
[Size of resident memory bufers. Unit: drm_i915]
drm-shared-stolen-system0
[Size of shared memory bufers. Unit: drm_i915]
drm-shared-system0
[Size of shared memory bufers. Unit: drm_i915]
drm-total-stolen-system0
[Size of shared and private memory. Unit: drm_i915]
drm-total-system0
[Size of shared and private memory. Unit: drm_i915]
```
System wide data can be gathered:
```
$ perf stat -x, -I 1000 -e drm-active-stolen-system0,drm-active-system0,drm-engine-capacity-video,drm-engine-copy,drm-engine-render,drm-engine-video,drm-engine-video-enhance,drm-purgeable-stolen-system0,drm-purgeable-system0,drm-resident-stolen-system0,drm-resident-system0,drm-shared-stolen-system0,drm-shared-system0,drm-total-stolen-system0,drm-total-system0
1.000904910,0,bytes,drm-active-stolen-system0,1,100.00,,
1.000904910,0,bytes,drm-active-system0,1,100.00,,
1.000904910,36,capacity,drm-engine-capacity-video,1,100.00,,
1.000904910,0,ns,drm-engine-copy,1,100.00,,
1.000904910,1472970566175,ns,drm-engine-render,1,100.00,,
1.000904910,0,ns,drm-engine-video,1,100.00,,
1.000904910,0,ns,drm-engine-video-enhance,1,100.00,,
1.000904910,0,bytes,drm-purgeable-stolen-system0,1,100.00,,
1.000904910,38199296,bytes,drm-purgeable-system0,1,100.00,,
1.000904910,0,bytes,drm-resident-stolen-system0,1,100.00,,
1.000904910,4643196928,bytes,drm-resident-system0,1,100.00,,
1.000904910,0,bytes,drm-shared-stolen-system0,1,100.00,,
1.000904910,1886871552,bytes,drm-shared-system0,1,100.00,,
1.000904910,0,bytes,drm-total-stolen-system0,1,100.00,,
1.000904910,4643196928,bytes,drm-total-system0,1,100.00,,
2.264426839,0,bytes,drm-active-stolen-system0,1,100.00,,
```
Or for a particular process:
```
$ perf stat -x, -I 1000 -e drm-active-stolen-system0,drm-active-system0,drm-engine-capacity-video,drm-engine-copy,drm-engine-render,drm-engine-video,drm-engine-video-enhance,drm-purgeable-stolen-system0,drm-purgeable-system0,drm-resident-stolen-system0,drm-resident-system0,drm-shared-stolen-system0,drm-shared-system0,drm-total-stolen-system0,drm-total-system0 -p 200027
1.001040274,0,bytes,drm-active-stolen-system0,6,100.00,,
1.001040274,0,bytes,drm-active-system0,6,100.00,,
1.001040274,12,capacity,drm-engine-capacity-video,6,100.00,,
1.001040274,0,ns,drm-engine-copy,6,100.00,,
1.001040274,1542300,ns,drm-engine-render,6,100.00,,
1.001040274,0,ns,drm-engine-video,6,100.00,,
1.001040274,0,ns,drm-engine-video-enhance,6,100.00,,
1.001040274,0,bytes,drm-purgeable-stolen-system0,6,100.00,,
1.001040274,13516800,bytes,drm-purgeable-system0,6,100.00,,
1.001040274,0,bytes,drm-resident-stolen-system0,6,100.00,,
1.001040274,27746304,bytes,drm-resident-system0,6,100.00,,
1.001040274,0,bytes,drm-shared-stolen-system0,6,100.00,,
1.001040274,0,bytes,drm-shared-system0,6,100.00,,
1.001040274,0,bytes,drm-total-stolen-system0,6,100.00,,
1.001040274,27746304,bytes,drm-total-system0,6,100.00,,
2.016629075,0,bytes,drm-active-stolen-system0,6,100.00,,
```
As with the hwmon PMU, high numbered PMU types are used to encode
multiple possible "DRM" PMUs. The appropriate fdinfo is found by
scanning /proc and filtering which fdinfos to read with stat. To avoid
some unneeding scanning, events not starting with "drm-" are
ignored. The patch builds on commit 57e13264dc ("perf pmus:
Restructure pmu_read_sysfs to scan fewer PMUs") and later so that only
if full wild carding is being done, the PMU starts with "drm_" or the
event starts with "drm-" will /proc be scanned. That is there should
be little to no cost in this PMU unless DRM events are requested.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624231837.179536-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The merge stat code fails for uncore events if they are repeated twice,
for example `perf stat -e clockticks,clockticks -I 1000` as the counts
of the second set of uncore events will be merged into the first
counter.
Reimplement the logic to have a first_wildcard_match so that merged
later events correctly merge into the first wildcard event that they
will be aggregated into.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Chun-Tse Shao <ctshao@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250513215401.2315949-3-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' has different uniquification logic to 'perf record' and perf
top. In the case of perf record and 'perf top' all hybrid event names
are uniquified.
'perf stat' is more disciplined respecting name config terms, libpfm4
events, etc.
'perf stat' will uniquify hybrid events and the non-core PMU cases
shouldn't apply to perf record or 'perf top'.
For consistency, remove the uniquification for 'perf record' and 'perf
top' and reuse the 'perf stat' uniquification, making the code more
globally visible for this.
Fix the detection of cross-PMU for disabling uniquify by correctly
setting last_pmu.
When setting uniquify on an evsel, make sure the PMUs between the 2
considered events differ otherwise the uniquify isn't adding value.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Chun-Tse Shao <ctshao@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250513215401.2315949-2-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mrvl_ddr_pmu will return EOPNOTSUPP if opened in per-thread
mode. Give a warning for this similar to EINVAL.
Doing this better supports metric testing with limited permissions when
the mrvl_ddr_pmu is present, as the failure to open causes the test to
skip and not fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250412004704.2297939-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parse the off-cpu event using parse_event(), as bpf-output.
Call evlist__enable_evsel() on off-cpu event. This fixes the inability
to collect direct off-cpu samples on a workload, as reported by Arnaldo
Carvalho de Melo <acme@redhat.com>.
The reason being, workload sets enable_on_exec instead of calling
evlist__enable(), but off-cpu event does not attach to an executable and
execve won't be called, so the fds from perf_event_open() are not
enabled.
no-inherit should be set to 1, here's the reason:
We update the BPF perf_event map for direct off-cpu sample dumping (in
following patches), it executes as follows:
bpf_map_update_value()
bpf_fd_array_map_update_elem()
perf_event_fd_array_get_ptr()
perf_event_read_local()
In perf_event_read_local(), there is:
int perf_event_read_local(struct perf_event *event, u64 *value,
u64 *enabled, u64 *running)
{
...
/*
* It must not be an event with inherit set, we cannot read
* all child counters from atomic context.
*/
if (event->attr.inherit) {
ret = -EOPNOTSUPP;
goto out;
}
Which means no-inherit has to be true for updating the BPF perf_event
map.
Moreover, for bpf-output events, we primarily want a system-wide event
instead of a per-task event.
The reason is that in BPF's bpf_perf_event_output(), BPF uses the CPU
index to retrieve the perf_event file descriptor it outputs to.
Making a bpf-output event system-wide naturally satisfies this
requirement by mapping CPU appropriately.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241108204137.2444151-4-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20250501022809.449767-3-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expose evsel__is_offcpu_event() so it can be used in off_cpu_config(),
evsel__parse_sample() and 'perf script'.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241108204137.2444151-3-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20250501022809.449767-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' will fail with retirement latency events as the open
doesn't do a perf_event_open system call.
Use evsel__config() to set up such events for recording by removing the
flag and enabling sample weights - the sample weights containing the
retirement latency.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor sending record control fd code into its own function.
Rather than killing the record process send it a ping when reading.
Timeouts were witnessed if done too frequently, so only ping for the
first tpebs events.
Don't kill the record command send it a stop command.
As close isn't reliably called also close on evsel__exit.
Add extra checks on the record being terminated to avoid warnings.
Adjust the locking as needed and incorporate extra -Wthread-safety
checks.
Check to do six 500ms poll timeouts when sending commands, rather than
the larger 3000ms, to allow the record process terminating to be better
witnessed.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename to reflect evsel argument and for consistency with other tpebs
functions.
Update count from prev_raw_counts when available.
Eventually this will allow inteval mode support.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evsel names and metric-ids are used for matching but this can be
problematic, for example, multiple occurrences of the same retirement
latency event become a single event for the record.
Change the name of the record events so they are unique and reflect the
evsel of the retirement latency event that opens them (the retirement
latency event's evsel address is embedded within them).
This allows an evsel based close to close the event when the retirement
latency event is closed.
This is important as 'perf stat' has an evlist and the session listen to
the record events has an evlist, knowing which event should remove the
tpebs_retire_lat can't be tied to an evlist list as there is more than
1, so closing which evlist should cause the tpebs to stop?
Using the evsel and the last one out doing the tpebs_stop is cleaner.
Committer notes:
Fix the build on 32-bit systems by using unsigned long when converting
pointers to integers instead of uint64_t. Fixes:
20 4.97 debian:experimental-x-mips : FAIL gcc version 14.2.0 (Debian 14.2.0-13)
util/intel-tpebs.c: In function 'tpebs_retire_lat__find':
util/intel-tpebs.c:377:21: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
377 | if ((uint64_t)t->evsel == num)
| ^
cc1: all warnings being treated as errors
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Try to add more consistency to evsel by having tpebs_start renamed to
evsel__tpebs_open, passing the evsel that is being opened. The unusual
behavior of evsel__tpebs_open opening all events on the evlist is kept
and will be cleaned up further in later patches. The comments are
cleaned up as tpebs_start isn't called from evlist.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel__handle_error_quirks() is to fixup invalid event attributes on
some architecture based on the error code. Currently it's only used for
AMD to disable precise_ip not to use IBS which has more restrictions.
But the commit c33aea446b changed call evsel__precise_ip_fallback
for any errors so there's no difference with the above function. To
make matter worse, it caused a problem with branch stack on Zen3.
The IBS doesn't support branch stack so it should use a regular core
PMU event. The default event is set precise_max and it starts with 3.
And evsel__precise_ip_fallback() tries with it and reduces the level one
by one. At last it tries with 0 but it also failed on Zen3 since the
branch stack is not supported for the cycles event.
At this point, evsel__precise_ip_fallback() restores the original
precise_ip value (3) in the hope that it can succeed with other modifier
(like exclude_kernel). Then evsel__handle_error_quirks() see it has
precise_ip != 0 and make it retry with 0. This created an infinite
loop.
Before:
$ perf record -b -vv |& grep removing
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
...
After:
$ perf record -b true
Error:
Failure to open event 'cycles:P' on PMU 'cpu' which will be removed.
Invalid event (cycles:P) in per-thread mode, enable system wide with '-a'.
Error:
Failure to open any events for recording.
Fixes: c33aea446b ("perf tools: Fix precise_ip fallback logic")
Tested-by: Chun-Tse Shao <ctshao@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250410010252.402221-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ensure evsel__clone copies the tp_sys and tp_name variables.
In evsel__tp_format, if tp_sys isn't set, use the config value to find
the tp_format. This succeeds in python code where pyrf__tracepoint has
already found the format.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-4-irogers@google.com
Fixes: 6c8310e838 ("perf evsel: Allow evsel__newtp without libtraceevent")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The struct dump_regs contains 512 bytes of cache_regs, meaning the two
values in perf_sample contribute 1088 bytes of its total 1384 bytes
size. Initializing this much memory has a cost reported by Tavian
Barnes <tavianator@tavianator.com> as about 2.5% when running `perf
script --itrace=i0`:
https://lore.kernel.org/lkml/d841b97b3ad2ca8bcab07e4293375fb7c32dfce7.1736618095.git.tavianator@tavianator.com/
Adrian Hunter <adrian.hunter@intel.com> replied that the zero
initialization was necessary and couldn't simply be removed.
This patch aims to strike a middle ground of still zeroing the
perf_sample, but removing 79% of its size by make user_regs and
intr_regs optional pointers to zalloc-ed memory. To support the
allocation accessors are created for user_regs and intr_regs. To
support correct cleanup perf_sample__init and perf_sample__exit
functions are created and added throughout the code base.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250113194345.1537821-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
evsel__is_hybrid returns true if there are multiple core PMUs and the
evsel is for a core PMU. Determining the number of core PMUs can
require loading/scanning PMUs. There's no point doing the scanning if
evsel for the is_hybrid test isn't core so reorder the tests to reduce
PMU scanning.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250201074320.746259-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add helper to get the name of the evsel's PMU. This handles the case
where there's no sysfs PMU via parse_events event_type helper.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250109222109.567031-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The existing EBUSY strerror message is:
The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (intel_bts//).
"dmesg | grep -i perf" may provide additional information.
The dmesg won't be useful. What is more useful is knowing what
processes are potentially using the PMU, which some procfs scanning can
reveal. When parallel testing tests/shell/stat_all_pmu.sh this yields:
Testing intel_bts//
Error:
The PMU intel_bts counters are busy and in use by another process.
Possible processes:
2585882 perf list
2585902 perf list -j -o /tmp/__perf_test.list_output.json.KF9MY
2585904 perf list
2585911 perf record -e task-clock --filter period > 1 -o /dev/null --quiet true
2585912 perf list
2585915 perf list
2586042 /tmp/perf/perf record -asdg -e cpu-clock -o /tmp/perftool-testsuite_report.dIF/perf_report/perf.data -- sleep 2
2589078 perf record -g -e task-clock:u -o - perf test -w noploop
2589148 /tmp/perf/perf record --control=fifo:control,ack -e cpu-clock -m 1 sleep 10
2589379 perf --buildid-dir /tmp/perf.debug.Umx record --buildid-all -o /tmp/perf.data.YBm /tmp/perf.ex.MD5.ZQW
2589568 perf record -o /tmp/__perf_test.program.mtcZH/perf.data --branch-filter any,save_type,u -- perf test -w brstack
2589649 perf record --per-thread -o /tmp/__perf_test.perf.data.5d3dc perf test -w thloop
2589898 perf record -o /tmp/perf-test-script.BX2b27Dcnj/pp-perf.data --sample-cpu uname
Which gets a little closer to finding the issue.
Committer testing:
root@number:~#
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@number:~#
Before:
root@number:~# perf stat -e intel_bts// &
[1] 197954
root@number:~# perf test "perf all PMU test"
124: perf all PMU test : FAILED!
root@number:~# perf test -v "perf all PMU test" |& tail
Testing i915/vecs0-busy/
Testing i915/vecs0-sema/
Testing i915/vecs0-wait/
Testing intel_bts//
Unexpected signal in main
Error:
The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (intel_bts//).
"dmesg | grep -i perf" may provide additional information.
---- end(-1) ----
124: perf all PMU test : FAILED!
root@number:~#
After:
root@number:~# perf stat -e intel_bts// &
[1] 200195
root@number:~# perf test "perf all PMU test"
123: perf all PMU test : FAILED!
root@number:~# perf test -v "perf all PMU test" |& tail
Testing i915/vecs0-wait/
Testing intel_bts//
Unexpected signal in main
Error:
The PMU intel_bts counters are busy and in use by another process.
Possible processes:
200195 perf stat -e intel_bts//
2319766 /root/bin/perf top --stdio
---- end(-1) ----
123: perf all PMU test : FAILED!
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ze Gao <zegao2021@gmail.com>
Change-Id: Ie1ed8688286c44e8f44a35e98fed8be3e2a344df
Link: https://lore.kernel.org/r/20241106003007.2112584-1-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now every time we need to figure out the type of an evsel for
output purposes we do a quick sequence of ifs, but there are new cases
where there is a need to do more complex iterations over multiple data
structures, sso allow for caching this operation on a hole of 'struct
evsel'.
This should really be done on the evsel->priv area that 'perf script'
sets up, but more work is needed to make sure that it is allocated when
we need it, right now it is only used for conditionally, add some
comments so that we move this to that 'perf script' specific area when
the conditions are in place for that.
Acked-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/lkml/Z2XCi3PgstSrV0SE@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic parse_events function that takes a string and returns an
evlist. As the python evlist is embedded in a pyrf_evlist, and the
evsels are embedded in pyrf_evsels, copy the parsed data into those
structs and update evsel__clone to enable this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20241119011644.971342-20-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display "feature is not supported" error message if aux_start_paused,
aux_pause or aux_resume result in a perf_event_open() error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241216070244.14450-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add parsing for aux-action to accept "pause", "resume" or "start-paused"
values.
"start-paused" is valid only for AUX area events.
"pause" and "resume" are valid only for events grouped with an AUX area
event as the group leader. However, like with aux-output, the events
will be automatically grouped if they are not currently in a group, and
the AUX area event precedes the other events.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241216070244.14450-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new common config term "aux-action" to use for configuring AUX area
trace pause / resume. The value is a string that will be parsed in a
subsequent patch.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241216070244.14450-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from reading the tracepoint format to reading the id directly for
the evsel config. This avoids the need to initialize libtraceevent,
plugins, etc. It is sufficient for many tracepoint commands to work
like:
$ perf stat -e sched:sched_switch true
To populate evsel->tp_format, do lazy initialization using libtraceevent
in the evsel__tp_format function (the sys and name are saved in
evsel__newtp_idx for this purpose).
Reading the id should be indicative of the format failing to load, but
if not an error is reported in evsel__tp_format. This could happen for a
tracepoint with a format that fails to parse.
As tracepoints can be parsed without libtraceevent with this, remove the
associated #ifdefs in parse-events.c.
By only lazily parsing the tracepoint format information it is hoped
this will help improve the performance of code using tracepoints but not
the format information. It also cuts down on the build and ifdef logic.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an accessor function for tp_format. Rather than search+replace
uses try to use a variable and reuse it. Add additional NULL checks
when accessing/using the value. Make sure the PTR_ERR is nulled out on
error path in evsel__newtp_idx.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes it returns other than EOPNOTSUPP for invalid precise_ip so
it cannot check the error code. Let's move the fallback after the
missing feature checks so that it can handle EINVAL as well. This also
aligns well with the existing behavior which blindly turns off the
precise_ip but we check the missing features correctly now.
Fixes: af954f76ee ("perf tools: Check fallback error and order")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Closes: https://lore.kernel.org/oe-lkp/202411301431.799e5531-lkp@intel.com
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/Z1DV0lN8qHSysX7f@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add the base PMU calls necessary for hwmon_pmu(s) to be
created/deleted and events found, listed, opened and read.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The perf_event_open might fail due to various reasons, so blindly
reducing precise_ip level might not be the best way to deal with it.
It seems the kernel return -EOPNOTSUPP when PMU doesn't support the
given precise level. Let's try again with the correct error code.
This caused a problem on AMD, as it stops on precise_ip of 2 for IBS but
user events with exclude_kernel=1 cannot make progress. Let's add the
evsel__handle_error_quirks() to this case specially. I plan to work on
the kernel side to improve this situation but it'd still need some
special handling for IBS.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The evsel__detect_missing_features() is to check if the attributes of
the evsel is supported or not. But it checks the attribute based on the
given evsel, it might miss something if the attr doesn't have the bit or
give incorrect results if the event is special.
Also it maintains the order of the feature that was added to the kernel
which means it can assume older features should be supported once it
detects the current feature is working. To minimized the confusion and
to accurately check the kernel features, I think it's better to use a
software event and go through all the features at once.
Also make the function static since it's only used in evsel.c.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Since it doesn't set the exclude_guest, no need to special handle the
bit and simply show only if one of host or guest bit is set. Now the
default event name might not have :H prefix anymore so change the
dlfilter test not to compare the ":" at the end.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 7b100989b4 ("perf evlist: Remove __evlist__add_default")
changed to parse "cycles:P" event instead of creating a new cycles
event for perf record. But it also changed the way how modifiers are
handled so it doesn't set the exclude_guest bit by default.
It seems Apple M1 PMU requires exclude_guest set and returns EOPNOTSUPP
if not. Let's add a fallback so that it can work with default events.
Also update perf stat hybrid tests to handle possible u or H modifiers.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-2-namhyung@kernel.org
Fixes: 7b100989b4 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove the C wrapper now a shell script wrapper exists. Move
perf_event_attr dumping functions to evsel.c and reduce the scope of
variables/defines. Use fprintf to avoid snprintf complexities in
WRITE_ASS.
Add __SANE_USERSPACE_TYPES__ to evsel.c to fix format flag issues on
PowerPC triggered by moving attr.c functions to evsel.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It should not clear the inherit bit simply because the kernel doesn't
support the sample read with it. IOW the inherit bit should be kept
when the sample read is not requested for the event.
Fixes: 90035d3cd8 ("tools/perf: Allow inherit + PERF_SAMPLE_READ when opening events")
Acked-by: Ben Gainey <ben.gainey@arm.com>
Link: https://lore.kernel.org/r/20241009062250.730192-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the events are associated with the tool PMU, rename the functions
to reflect this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To better reflect the events listed are from the tool PMU. Rename the
enum values from PERF_TOOL_* to TOOL_PMU__EVENT_*.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than treat tool events as a special kind of event, create a
tool only PMU where the events/aliases match the existing
duration_time, user_time and system_time events. Remove special
parsing and printing support for the tool events, but add function
calls for when PMU functions are called on a tool_pmu.
Move the tool PMU code in evsel into tool_pmu.c to better encapsulate
the tool event behavior in that file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "perf record" tool will now default to this new mode if the user
specifies a sampling group when not in system-wide mode, and when
"--no-inherit" is not specified.
This change updates evsel to allow the combination of inherit
and PERF_SAMPLE_READ.
A fallback is implemented for kernel versions where this feature is not
supported.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Cc: james.clark@arm.com
Link: https://lore.kernel.org/r/20241001121505.1009685-3-ben.gainey@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In __evsel__config_callchain avoid computing arch until code path that
uses it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240918223116.127386-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
