The perf_env from the header in the session is frequently accessed,
add an accessor function rather than access directly. Cache the value
to avoid repeated calls. No behavioral change.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously when running perf trace timehist --state, when recording
processes in the zombie state the process name would not be decoded
properly and appears with just the PID:
1140057.412177 [0006] Mutter Input Th[3139/3104] 0.956 0.019 0.041 S
1140057.412222 [0012] :1248612[1248612] 0.000 0.000 0.332 Z
1140057.412275 [0004] <idle> 0.052 0.052 0.953 I
1140057.412284 [0008] <idle> 0.070 0.070 0.932 I
1140057.412333 [0004] KMS thread[3126/3104] 0.953 0.112 0.058 S
Now some extra processing has been added to decode the process name:
1140057.412177 [0006] Mutter Input Th[3139/3104] 0.956 0.019 0.041 S
1140057.412222 [0012] sleep[1248612] 0.000 0.000 0.332 Z
1140057.412275 [0004] <idle> 0.052 0.052 0.953 I
1140057.412284 [0008] <idle> 0.070 0.070 0.932 I
1140057.412333 [0004] KMS thread[3126/3104] 0.953 0.112 0.058 S
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Link: https://lore.kernel.org/r/20250716203914.45772-2-ashelat@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0 ("perf sched: Finish latency => atom rename and misc cleanups")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
So that it can check two pointers to the same object properly when
REFCNT_CHECKING is on.
Fixes: 78c32f4cb1 ("libperf rc_check: Add RC_CHK_EQUAL")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It uses evsel->priv to save per-cpu timing information. It should be
freed when the evsel is released.
Add the priv destructor for evsel same as thread to handle that.
Fixes: 49394a2a24 ("perf sched timehist: Introduce timehist command")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add missing thread__put() after machine__findnew_thread() or
timehist_get_thread(). Also idle threads' last_thread should be
refcounted properly.
Fixes: 699b5b920d ("perf sched timehist: Save callchain when entering idle")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It maintains per-cpu pointers for the current thread but it doesn't
release the refcounts.
Fixes: 5e89527869 ("perf sched: Move curr_thread initialization to perf_sched__map()")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In many perf sched subcommand saves priv data structure in the thread
but it forgot to free them. As it's an opaque type with 'void *', it
needs to register that knows how to free the data. In this case, just
regular 'free()' is fine.
Fixes: 04cb4fc4d4 ("perf thread: Allow tools to register a thread->priv destructor")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The parse_options_subcommand() allocates the usage string based on the
given subcommands. So it should reach the end of the function to free
the string to prevent memory leaks.
Fixes: 1a5efc9e13 ("libsubcmd: Don't free the usage string")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
libperf exposes MAX_NR_CPUS via tools/lib/perf/include/internal/cpumap.h
which is internal.
The preferred dependency should be the definition in tools/perf/perf.h.
Add the includes of perf.h so that MAX_NR_CPUS can be hidden in libperf.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add printf format checking to vararg printf routines in
color.h. Resolve build errors/bugs that are found through this
checking.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241017175356.783793-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
pre-migration wait time is the time that a task unnecessarily spends
on the runqueue of a CPU but doesn't get switched-in there. In terms
of tracepoints, it is the time between sched:sched_wakeup and
sched:sched_migrate_task.
Let's say a task woke up on CPU2, then it got migrated to CPU4 and
then it's switched-in to CPU4. So, here pre-migration wait time is
time that it was waiting on runqueue of CPU2 after it is woken up.
The general pattern for pre-migration to occur is:
sched:sched_wakeup
sched:sched_migrate_task
sched:sched_switch
The sched:sched_waking event is used to capture the wakeup time,
as it aligns with the existing code and only introduces a negligible
time difference.
pre-migrations are generally not useful and it increases migrations.
This metric would be helpful in testing patches mainly related to wakeup
and load-balancer code paths as better wakeup logic would choose an
optimal CPU where task would be switched-in and thereby reducing pre-
migrations.
The sample output(s) when -P or --pre-migrations is used:
=================
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
38456.720806 [0001] schbench[28634/28574] 4.917 4.768 1.004 0.000
38456.720810 [0001] rcu_preempt[18] 3.919 0.003 0.004 0.000
38456.721800 [0006] schbench[28779/28574] 23.465 23.465 1.999 0.000
38456.722800 [0002] schbench[28773/28574] 60.371 60.237 3.955 60.197
38456.722806 [0001] schbench[28634/28574] 0.004 0.004 1.996 0.000
38456.722811 [0001] rcu_preempt[18] 1.996 0.005 0.005 0.000
38456.723800 [0000] schbench[28833/28574] 4.000 4.000 3.999 0.000
38456.723800 [0004] schbench[28762/28574] 42.951 42.839 3.999 39.867
38456.723802 [0007] schbench[28812/28574] 43.947 43.817 3.999 40.866
38456.723804 [0001] schbench[28587/28574] 7.935 7.822 0.993 0.000
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241004170756.18064-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The sleep_sem semaphore and the specific_wait field (member of sched_atom)
are initialized but not used anywhere in the code, so this patch removes
them.
The SCHED_EVENT_MIGRATION case in perf_sched__process_event() is currently
not used and is also removed.
Additionally, prev_state in add_sched_event_sleep() is marked with
__maybe_unused and is not utilized anywhere in the function. This patch
removes the parameter.
If the task_state parameter was intended for future use, it can be
reintroduced when needed.
No functionality change intended.
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240917090100.42783-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently, commands which depend on 'parse_options_subcommand()' don't
show the usage string, and instead show '(null)'
$ ./perf sched
Usage: (null)
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
'parse_options_subcommand()' is generally expected to initialise the usage
string, with information in the passed 'subcommands[]' array
This behaviour was changed in:
230a7a71f9 ("libsubcmd: Fix parse-options memory leak")
Where the generated usage string is deallocated, and usage[0] string is
reassigned as NULL.
As discussed in [1], free the allocated usage string in the main
function itself, and don't reset usage string to NULL in
parse_options_subcommand
With this change, the behaviour is restored.
$ ./perf sched
Usage: perf sched [<options>] {record|latency|map|replay|script|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
[1]: https://lore.kernel.org/linux-perf-users/htq5vhx6piet4nuq2mmhk7fs2bhfykv52dbppwxmo3s7du2odf@styd27tioc6e/
Fixes: 230a7a71f9 ("libsubcmd: Fix parse-options memory leak")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904061836.55873-2-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BUG_ON(thread__tid(thread) != 0) in timehist_sched_change_event() is
redundant, remove it.
No functional change.
Fixes: 07235f84ec ("perf sched timehist: Add -I/--idle-hist option")
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240812132606.3126490-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf_time__parse_str() fails in perf_sched__timehist(),
need to free session that was previously created, fix it.
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-19-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default, perf sched map prints sched-in events for all the tasks
which may not be required all the time as it prints lot of symbols
and rows to the terminal.
With --task-name option, one could specify the specific task name
for which the map has to be shown. This would help in analyzing the
CPU usage patterns easier for that specific task. Since multiple
PID's might have the same task name, using task-name filter
would be more useful for debugging.
For other tasks, instead of printing the symbol, '-' is printed and
the same '.' is used to represent idle. '-' is used instead of symbol
for other tasks because it helps in clear visualization of task
of interest and secondly the symbol itself doesn't mean anything
because the sched-in of that symbol will not be printed(first sched-in
contains pid and the corresponding symbol).
When using the --task-name option, the sched-out time is represented
by a '*-'. Since not all task sched-in events are printed, the sched-out
time of the relevant task might be lost. This representation ensures
that the sched-out time of the interested task is not overlooked.
6.10.0-rc1
==========
*A0 131040.639793 secs A0 => migration/0:19
*. 131040.639801 secs . => swapper:0
. *B0 131040.639830 secs B0 => migration/1:24
. *. 131040.639836 secs
. . *C0 131040.640108 secs C0 => migration/2:30
. . *. 131040.640163 secs
. . . *D0 131040.640386 secs D0 => migration/3:36
. . . *. 131040.640395 secs
6.10.0-rc1 + patch (--task-name wdavdaemon)
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
- *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277
C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270
*- . B0 . D0 . E0 . 131040.641581 secs
. . B0 . D0 . *- . 131040.641583 secs
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently, the -r/--repeat option accepts values from 0 and complains
for -1. The help section specifies:
-r, --repeat <n> repeat the workload replay N times (-1: infinite)
The -r -1 option raises an error because replay_repeat is defined as
an unsigned int.
In the current implementation, the workload is repeated n times when
-r <n> is used, except when n is 0.
When -r is set to 0, the workload is also repeated once. This happens
because when -r=0, the run_one_test function is not called. (Note that
mutex unlocking, which is essential for child threads spawned to emulate
the workload, happens in run_one_test.) However, mutex unlocking is
still performed in the destroy_tasks function. Thus, -r=0 results in the
workload running once coincidentally.
To clarify and maintain the existing logic for -r >= 1 (which runs the
workload the specified number of times) and to fix the issue with infinite
runs, make -r=0 perform an infinite run.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240628071821.15264-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When using perf timehist, sch delay is only computed for a waking task,
not for a pre empted task. This patches changes sch delay to account for
both. This makes sense as testing scheduling policy need to consider the
effect of scheduling delay globally, not only for waking tasks.
Example of `perf timehist` report before the patch for `stress` task
competing with each other.
First column is wait time, second column sch delay, third column
runtime.
1.492060 [0000] s stress[81] 1.999 0.000 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 0.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 0.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 0.000 1.999 R next: stress[81]
After the patch, it looks like this (note that all wait time is not zero
anymore):
1.492060 [0000] s stress[81] 1.999 1.999 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 2.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 2.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 2.000 1.999 R next: stress[81]
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240618090339.87482-1-sieberf@amazon.com
perf sched map supports cpu filter.
However, even with cpu filters active, any context switch currently
corresponds to a separate line.
As result, context switches on irrelevant cpus result to redundant lines,
which makes the output particlularly difficult to read on wide
architectures.
Fix it by skipping printing for irrelevant CPUs.
Example snippet of output before fix:
*B0 1.461147 secs
B0
B0
B0
*G0 1.517139 secs
After fix:
*B0 1.461147 secs
*G0 1.517139 secs
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-and-tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240614073517.94974-1-sieberf@amazon.com
Rename 'Switches' to 'Count' and document metrics shown for perf
sched latency output. Also add options possible with perf sched
latency.
Initially, after seeing the output of 'perf sched latency', the term
'Switches' seemed like it's the number of context switches-in for a
particular task, but upon going through the code, it was observed that
it's actually keeping track of number of times a delay was calculated so
that it is used in calculation of the average delay.
Actually, the switches here is a subset of number of context switches-in
because there are some cases where the count is not incremented in
switch-in handler 'add_sched_in_event'. For example when a task is
switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).
commit d9340c1db3 ("perf sched: Display time in milliseconds,
reorganize output") changed it from the original count to switches.
So, renamed switches to count to make things a bit more clearer and
added the metrics description of latency in the document.
Reviewed-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240328090005.8321-1-vineethr@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_sched__map() needs to free memory of map_cpus, color_pids and
color_cpus in normal path and rollback allocated memory in error path.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-3-yangjihong1@huawei.com
Now that we have evsel__taskstate() which no longer relies on the
hardcoded task state string and has good backward compatibility,
we have a good reason to use it.
Note TASK_STATE_TO_CHAR_STR and task bitmasks are useless now so
we remove them for good. And now we pass the state info back and
forth in a symbolic char which explains itself well instead.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240123022425.1611483-1-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update state char array to match the latest kernel definitions and
remove unused state mapping macros.
Note this is the preparing patch for get rid of the way to parse
process state from raw bitmask value. Instead we are going to
parse it from the recorded tracepoint print format, and this change
marks why we're doing it.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240122070859.1394479-3-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Comparing pointers with reference count checking is tricky to avoid a
SEGV. Add a convenience macro to simplify and use.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 5ded57ac1b ("perf inject: Remove static variables") moved
static variables to local, however, in this case 3 MAX_CPUS (4096)
sized arrays were moved onto the stack making the stack frame quite
large. Avoid the stack usage by dynamically allocating the arrays.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230527034324.2597593-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pthread keys are more portable than __thread and allow the association
of a destructor with the key. Use the destructor to clean up TLS
callchain cursors to aid understanding memory leaks.
Committer notes:
Had to fixup a series of unconverted places and also check for the
return of get_tls_callchain_cursor() as it may fail and return NULL.
In that unlikely case we now either print something to a file, if the
caller was expecting to print a callchain, or return an error code to
state that resolving the callchain isn't possible.
In some cases this was made easier because thread__resolve_callchain()
already can fail for other reasons, so this new one (cursor == NULL) can
be added and the callers don't have to explicitely check for this new
condition.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify struct declaration and accessor functions for the reference
count checkers additional layer of indirection. Make sure pid_cmp in
builtin-sched.c uses the underlying/original struct in pointer
arithmetic, and not the temporary get/put indirection.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct addr_location holds references to multiple reference counted
objects. Add init/exit functions to make maintenance of those more
consistent with the rest of the code and to try to avoid
leaks. Modification of thread reference counts isn't included in this
change.
Committer notes:
I needed to initialize result to sample->ip to make sure is set to
something, fixing a compile time error, mostly keeping the previous
logic as build_alloc_func_list() already does debugging/error prints
about what went wrong if it takes the 'goto out'.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using accessors will make it easier to add reference count checking in
later patches.
Committer notes:
thread->nsinfo wasn't wrapped as it is used together with
nsinfo__zput(), where does a trick to set the field with a refcount
being dropped to NULL, and that doesn't work well with using
thread__nsinfo(thread), that loses the &thread->nsinfo pointer.
When refcount checking is added to 'struct thread', later in this
series, nsinfo__zput(RC_CHK_ACCESS(thread)->nsinfo) will be used to
check the thread pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dead thread list is best effort. Threads live on it until the
reference count hits zero and they are removed. With correct reference
counting this should never happen. It is, however, part of the 'perf
sched' output that is now removed. If this is an issue we should
implement tracking of dead threads in a robust not best-effort way.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf sched latency' is incorrect to get process schedule latency when
it used 'sched:sched_wakeup' to analysis perf.data.
Because 'perf record' prefers to use 'sched:sched_waking' to
'sched:sched_wakeup' since commit d566a9c2d4 ("perf sched: Prefer
sched_waking event when it exists"). It's very reasonable to evaluate
process schedule latency.
Similarly, update sched latency/map/replay to use sched_waking events.
Signed-off-by: Chunxin Zang <zangchunxin@lixiang.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230328060038.2346935-1-zangchunxin@lixiang.com
Signed-off-by: Jerry Zhou <zhouchunhua@lixiang.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'input_name' is the name of the input perf.data file, it is used by data
convert and ui code. Move it to util to make it more consistent with
other global state.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raul Silvera <rsilvera@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230410162511.3055900-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20221119013450.2643007-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add destroy_tasks() as a counterpart of create_tasks() and put the
thread safety notations there. After join, it destroys semaphores too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908225448.4105056-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add annotations to describe lock behavior. Add unlocks so that mutexes
aren't conditionally held on exit from perf_sched__replay. Add an exit
variable so that thread_func can terminate, rather than leaving the
threads blocked on mutexes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dario Petrillo <dario.pk1@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Fangrui Song <maskray@google.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Weiguo Li <liwg06@foxmail.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Zechuan Chen <chenzechuan1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/20220826164242.43412-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
