mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
1275 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ian Rogers
|
53b00ff358 |
perf record: Make --buildid-mmap the default
Support for build IDs in mmap2 perf events has been present since Linux v5.12: https://lore.kernel.org/lkml/20210219194619.1780437-1-acme@kernel.org/ Build ID mmap events don't avoid the need to inject build IDs for DSO touched by samples as the build ID cache is populated by perf record. They can avoid some cases of symbol mis-resolution caused by the file system changing from when a sample occurred and when the DSO is sought. Unlike the --buildid-mmap option, this chnage doesn't disable the build ID cache but it does disable the processing of samples looking for DSOs to inject build IDs for. To disable the build ID cache the -B (--no-buildid) option should be used. Making this option the default was raised on the list in: https://lore.kernel.org/linux-perf-users/CAP-5=fXP7jN_QrGUcd55_QH5J-Y-FCaJ6=NaHVtyx0oyNh8_-Q@mail.gmail.com/ Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250724163302.596743-9-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Ian Rogers
|
bd741d80dc |
perf parse-events: Allow the cpu term to be a PMU or CPU range
On hybrid systems, events like msr/tsc/ will aggregate counts across
all CPUs. Often metrics only want a value like msr/tsc/ for the cores
on which the metric is being computed. Listing each CPU with terms
cpu=0,cpu=1.. is laborious and would need to be encoded for all
variations of a CPU model.
Allow the cpumask from a PMU to be an argument to the cpu term. For
example in the following the cpumask of the cstate_pkg PMU selects the
CPUs to count msr/tsc/ counter upon:
```
$ cat /sys/bus/event_source/devices/cstate_pkg/cpumask
0
$ perf stat -A -e 'msr/tsc,cpu=cstate_pkg/' -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 252,621,253 msr/tsc,cpu=cstate_pkg/
0.101184092 seconds time elapsed
```
As the cpu term is now also allowed to be a string, allow it to encode
a range of CPUs (a list can't be supported as ',' is already a special
token).
The "event qualifiers" section of the `perf list` man page is updated
to detail the additional behavior. The man page formatting is tidied
up in this section, as it was incorrectly appearing within the
"parameterized events" section.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Changbin Du
|
129f70bd60 |
perf: ftrace: add graph tracer options args/retval/retval-hex/retaddr
This change adds support for new funcgraph tracer options funcgraph-args,
funcgraph-retval, funcgraph-retval-hex and funcgraph-retaddr.
The new added options are:
- args : Show function arguments.
- retval : Show function return value.
- retval-hex : Show function return value in hexadecimal format.
- retaddr : Show function return address.
# ./perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
5) | _raw_spin_unlock_irqrestore() { /* <-rt_mutex_slowunlock+0x191/0x200 */
5) 0.097 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cff1f */
5) 0.086 us | do_raw_spin_unlock(); /* <-_raw_spin_unlock_irqrestore+0x23/0x60 ret=0x1 */
5) 0.104 us | preempt_count_sub(); /* <-_raw_spin_unlock_irqrestore+0x35/0x60 ret=0x0 */
5) 0.726 us | } /* _raw_spin_unlock_irqrestore ret=0x80000000 */
5) 1.881 us | } /* rt_mutex_slowunlock ret=0x0 */
5) 2.931 us | } /* mutex_unlock ret=0x0 */
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250613114048.132336-1-changbin.du@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Namhyung Kim
|
8db1d77248 |
perf ftrace latency: Add -e option to measure time between two events
In addition to the function latency, it can measure events latencies.
Some kernel tracepoints are paired and it's menningful to measure how
long it takes between the two events. The latency is tracked for the
same thread.
Currently it only uses BPF to do the work but it can be lifted later.
Instead of having separate a BPF program for each tracepoint, it only
uses generic 'event_begin' and 'event_end' programs to attach to any
(raw) tracepoints.
$ sudo perf ftrace latency -a -b --hide-empty \
-e i915_request_wait_begin,i915_request_wait_end -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250714052143.342851-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Chun-Tse Shao
|
aa497357c1 |
perf stat: Fix uncore aggregation number
Follow up:
lore.kernel.org/CAP-5=fVDF4-qYL1Lm7efgiHk7X=_nw_nEFMBZFMcsnOOJgX4Kg@mail.gmail.com/
The patch adds unit aggregation during evsel merge the aggregated uncore
counters. Change the name of the column to `ctrs` and `counters` for
json mode.
Tested on a 2-socket machine with SNC3, uncore_imc_[0-11] and
cpumask="0,120"
Before:
perf stat -e clockticks -I 1000 --per-socket
# time socket cpus counts unit events
1.001085024 S0 1 9615386315 clockticks
1.001085024 S1 1 9614287448 clockticks
perf stat -e clockticks -I 1000 --per-node
# time node cpus counts unit events
1.001029867 N0 1 3205726984 clockticks
1.001029867 N1 1 3205444421 clockticks
1.001029867 N2 1 3205234018 clockticks
1.001029867 N3 1 3205224660 clockticks
1.001029867 N4 1 3205207213 clockticks
1.001029867 N5 1 3205528246 clockticks
After:
perf stat -e clockticks -I 1000 --per-socket
# time socket ctrs counts unit events
1.001026071 S0 12 9619677996 clockticks
1.001026071 S1 12 9618612614 clockticks
perf stat -e clockticks -I 1000 --per-node
# time node ctrs counts unit events
1.001027449 N0 4 3207251859 clockticks
1.001027449 N1 4 3207315930 clockticks
1.001027449 N2 4 3206981828 clockticks
1.001027449 N3 4 3206566126 clockticks
1.001027449 N4 4 3206032609 clockticks
1.001027449 N5 4 3205651355 clockticks
Tested with JSON output linter:
perf test "perf stat JSON output linter"
94: perf stat JSON output linter : Ok
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Link: https://lore.kernel.org/r/20250627201818.479421-1-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Yuzhuo Jing
|
8e63fd1e00 |
tools: Remove libcrypto dependency
Remove all occurrence of libcrypto in the build system. Signed-off-by: Yuzhuo Jing <yuzhuo@google.com> Signed-off-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250625202311.23244-5-ebiggers@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Namhyung Kim
|
c833e8cc4d |
Linux 6.16-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmhYZ9AeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGPdcIAIR01BnZbU7knvkI QSMlJR4zl8IDIu+9P35v5jmoklJFqYtIGQUnNTxrWK0i/NGj6+FAmA8xgAzeJZ7d Kv0Qs0fkgwQWxFbbM9Xg9Vob8gxSZ6Qyo5ETz8UDupCNWyUPpMaRDLv8IRtF/19I YAgXJqCXC4LuJJNROSkk3wiLqg+CerzJ/m7GJtBQdCmbv6h87HETaeQpKVgEwTkR uEn99CDnOryovIYWoDaBbqLRF5AQr2JA6lqmQAr57wyjzuj1Ul2BNgLC/dlnuSQl G8kv0+Kf+l1X3UJy1w8V4lkSLyjpTko7QIgv3AVDLDvOobCtZglWD4vPJ1OGvw4m cHDrPg4= =thw2 -----END PGP SIGNATURE----- Merge tag 'v6.16-rc3' into perf-tools-next To get the fixes in libbpf and perf tools. Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Blake Jones
|
1d0654b7fd |
perf build: detect support for libbpf's emit_strings option
This creates a config option that detects libbpf's ability to display character arrays as strings, which was just added to the BPF tree (https://git.kernel.org/bpf/bpf-next/c/87c9c79a02b4). To test this change, I built perf (from later in this patch set) with: - static libbpf (default, using source from kernel tree) - dynamic libbpf (LIBBPF_DYNAMIC=1 LIBBPF_INCLUDE=/usr/local/include) For both the static and dynamic versions, I used headers with and without the ".emit_strings" option. I verified that of the four resulting binaries, the two with ".emit_strings" would successfully record BPF_METADATA events, and the two without wouldn't. All four binaries would successfully display BPF_METADATA events, because the relevant bit of libbpf code is only used during "perf record". Signed-off-by: Blake Jones <blakejones@google.com> Link: https://lore.kernel.org/r/20250612194939.162730-2-blakejones@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Namhyung Kim
|
bbeb1088a4 |
perf mem: Document new output fields (op, cache, mem, dtlb, snoop)
Update the documentation of the new fields with examples and caveats. Also update the related documentation for AMD IBS. Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250610005742.2173050-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Howard Chu
|
46e34646ae |
perf trace: Remove --map-dump documentation
The --map-dump option was removed in |
||
|
Namhyung Kim
|
0df14c1f1e |
perf lock contention: Reject more than 10ms delays for safety
Delaying kernel operations can be dangerous and the kernel may kill
(non-sleepable) BPF programs running for long in the future.
Limit the max delay to 10ms and update the document about it.
$ sudo ./perf lock con -abl -J 100000us@cgroup_mutex true
lock delay is too long: 100000us (> 10ms)
Usage: perf lock contention [<options>]
-J, --inject-delay <TIME@FUNC>
Inject delays to specific locks
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250515181042.555189-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ravi Bangoria
|
00a23c000e |
perf mem: Describe overhead calculation in brief
Unlike perf-report which uses sample period for overhead calculation, perf-mem overhead is calculated using sample weight. Describe perf-mem overhead calculation method in it's man page. Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20250523222157.1259998-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Chun-Tse Shao
|
208c0e1683 |
perf record: Add 8-byte aligned event type PERF_RECORD_COMPRESSED2
The original PERF_RECORD_COMPRESS is not 8-byte aligned, which can cause
asan runtime error:
# Build with asan
$ make -C tools/perf O=/tmp/perf DEBUG=1 EXTRA_CFLAGS="-O0 -g -fno-omit-frame-pointer -fsanitize=undefined"
# Test success with many asan runtime errors:
$ /tmp/perf/perf test "Zstd perf.data compression/decompression" -vv
83: Zstd perf.data compression/decompression:
...
util/session.c:1959:13: runtime error: member access within misaligned address 0x7f69e3f99653 for type 'union perf_event', which requires 13 byte alignment
0x7f69e3f99653: note: pointer points here
d0 3a 50 69 44 00 00 00 00 00 08 00 bb 07 00 00 00 00 00 00 44 00 00 00 00 00 00 00 ff 07 00 00
^
util/session.c:2163:22: runtime error: member access within misaligned address 0x7f69e3f99653 for type 'union perf_event', which requires 8 byte alignment
0x7f69e3f99653: note: pointer points here
d0 3a 50 69 44 00 00 00 00 00 08 00 bb 07 00 00 00 00 00 00 44 00 00 00 00 00 00 00 ff 07 00 00
^
...
Since there is no way to align compressed data in zstd compression, this
patch add a new event type `PERF_RECORD_COMPRESSED2`, which adds a field
`data_size` to specify the actual compressed data size.
The `header.size` contains the total record size, including the padding
at the end to make it 8-byte aligned.
Tested with `Zstd perf.data compression/decompression`
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303183646.327510-1-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
ef60b8f572 |
perf trace: Support --summary-mode=cgroup
Add a new summary mode to collect stats for each cgroup.
$ sudo ./perf trace -as --bpf-summary --summary-mode=cgroup -- sleep 1
Summary of events:
cgroup /user.slice/user-657345.slice/user@657345.service/session.slice/org.gnome.Shell@x11.service, 535 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
ppoll 15 0 373.600 0.004 24.907 197.491 55.26%
poll 15 0 1.325 0.001 0.088 0.369 38.76%
close 66 0 0.567 0.007 0.009 0.026 3.55%
write 150 0 0.471 0.001 0.003 0.010 3.29%
recvmsg 94 83 0.290 0.000 0.003 0.037 16.39%
ioctl 26 0 0.237 0.001 0.009 0.096 50.13%
timerfd_create 66 0 0.236 0.003 0.004 0.024 8.92%
timerfd_settime 70 0 0.160 0.001 0.002 0.012 7.66%
writev 10 0 0.118 0.001 0.012 0.019 18.17%
read 9 0 0.021 0.001 0.002 0.004 14.07%
getpid 14 0 0.019 0.000 0.001 0.004 20.28%
cgroup /system.slice/polkit.service, 94 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
ppoll 22 0 19.811 0.000 0.900 9.273 63.88%
write 30 0 0.040 0.001 0.001 0.003 12.09%
recvmsg 12 0 0.018 0.001 0.002 0.006 28.15%
read 18 0 0.013 0.000 0.001 0.003 21.99%
poll 12 0 0.006 0.000 0.001 0.001 4.48%
cgroup /user.slice/user-657345.slice/user@657345.service/app.slice/app-org.gnome.Terminal.slice/gnome-terminal-server.service, 21 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
ppoll 4 0 17.476 0.003 4.369 13.298 69.65%
recvmsg 15 12 0.068 0.002 0.005 0.014 26.53%
writev 1 0 0.033 0.033 0.033 0.033 0.00%
poll 1 0 0.005 0.005 0.005 0.005 0.00%
...
It works only for --bpf-summary for now.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250501225337.928470-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
39922dc53c |
perf report: Add 'tgid' sort key
Sometimes we need to analyze the data in process level but current sort
keys only work on thread level. Let's add 'tgid' sort key for that as
'pid' is already taken for thread.
This will look mostly the same, but it only uses tgid instead of tid.
Here's an example of a process with two threads (thloop).
$ perf record -- perf test -w thloop
$ perf report --stdio -s tgid,pid -H
...
#
# Overhead Tgid:Command / Pid:Command
# ........... ..........................
#
100.00% 2018407:perf
50.34% 2018407:perf
49.66% 2018409:perf
Suggested-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250509210421.197245-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
255f5b6d06 |
perf parse-events: Add "cpu" term to set the CPU an event is recorded on
The -C option allows the CPUs for a list of events to be specified but
its not possible to set the CPU for a single event. Add a term to
allow this. The term isn't a general CPU list due to ',' already being
a special character in event parsing instead multiple cpu= terms may
be provided and they will be merged/unioned together.
An example of mixing different types of events counted on different CPUs:
```
$ perf stat -A -C 0,4-5,8 -e "instructions/cpu=0/,l1d-misses/cpu=4,cpu=5/,inst_retired.any/cpu=8/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 6,979,225 instructions/cpu=0/ # 0.89 insn per cycle
CPU4 75,138 cpu/l1d-misses/
CPU5 1,418,939 cpu/l1d-misses/
CPU8 797,553 cpu/inst_retired.any,cpu=8/
CPU0 7,845,302 cycles
CPU4 6,546,859 cycles
CPU5 185,915,438 cycles
CPU8 2,065,668 cycles
0.112449242 seconds time elapsed
```
Committer testing:
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf stat -A -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 2,398,351 instructions/cpu=0/ # 0.44 insn per cycle
CPU0 2,398,152 instructions # 0.44 insn per cycle
CPU1 1,265,634 instructions # 0.49 insn per cycle
CPU2 606,087 instructions # 0.50 insn per cycle
CPU3 4,025,752 instructions # 0.52 insn per cycle
CPU4 4,236,810 instructions # 0.53 insn per cycle
CPU5 3,984,832 instructions # 0.66 insn per cycle
CPU6 434,132 instructions # 0.44 insn per cycle
CPU7 65,752 instructions # 0.41 insn per cycle
CPU8 459,083 instructions # 0.48 insn per cycle
CPU9 6,464,161 instructions # 1.31 insn per cycle
<SNIP>
root@number:~# perf stat -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.
Performance counter stats for 'system wide':
144,822 instructions/cpu=0/ # 0.03 insn per cycle
4,666,114 instructions # 0.93 insn per cycle
2,583 l1d-misses
4,993,633 cycles
0.000868512 seconds time elapsed
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
352b088164 |
perf intel-pt: Do not default to recording all switch events
On systems with many CPUs, recording extra context switch events can be
excessive and unnecessary. Add perf config intel-pt.all-switch-events=false
to control the behaviour.
Example:
# perf config intel-pt.all-switch-events=false
# perf record -eintel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.082 MB perf.data ]
# perf script -D | grep PERF_RECORD_SWITCH | awk '{print $5}' | uniq -c
5 PERF_RECORD_SWITCH
# perf config intel-pt.all-switch-events=true
# perf record -eintel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.102 MB perf.data ]
# perf script -D | grep PERF_RECORD_SWITCH | awk '{print $5}' | uniq -c
180 PERF_RECORD_SWITCH_CPU_WIDE
Committer testing:
While doing a make -j28 allmodconfig:
root@five:~# grep "model name" -m1 /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@five:~#
root@five:~# perf config intel-pt.all-switch-events=false
root@five:~# perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
root@five:~# perf report --stats | grep SWITCH_CPU_WIDE
root@five:~#
root@five:~# perf config intel-pt.all-switch-events=true
root@five:~# perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.047 MB perf.data ]
root@five:~# perf report --stats | grep SWITCH_CPU_WIDE
SWITCH_CPU_WIDE events: 542 (96.4%)
root@five:~#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
c42e219942 |
perf lock contention: Add -J/--inject-delay option
This is to slow down lock acquistion (on contention locks) deliberately.
A possible use case is to estimate impact on application performance by
optimization of kernel locking behavior. By delaying the lock it can
simulate the worse condition as a control group, and then compare with
the current behavior as a optimized condition.
The syntax is 'time@function' and the time can have unit suffix like
"us" and "ms". For example, I ran a simple test like below.
$ sudo perf lock con -abl -L tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
92 1.18 ms 199.54 us 12.79 us ffffffff8a806080 tasklist_lock (rwlock)
The contention count was 92 and the average wait time was around 10 us.
But if I add 100 usec of delay to the tasklist_lock,
$ sudo perf lock con -abl -L tasklist_lock -J 100us@tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
190 15.67 ms 230.10 us 82.46 us ffffffff8a806080 tasklist_lock (rwlock)
The contention count increased and the average wait time was up closed
to 100 usec. If I increase the delay even more,
$ sudo perf lock con -abl -L tasklist_lock -J 1ms@tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1002 2.80 s 3.01 ms 2.80 ms ffffffff8a806080 tasklist_lock (rwlock)
Now every sleep process had contention and the wait time was more than 1
msec. This is on my 4 CPU laptop so I guess one CPU has the lock while
other 3 are waiting for it mostly.
For simplicity, it only supports global locks for now.
Committer testing:
root@number:~# grep -m1 'model name' /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf lock con -abl -L tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
142 453.85 us 25.39 us 3.20 us ffffffffae808080 tasklist_lock (rwlock)
root@number:~# perf lock con -abl -L tasklist_lock -J 100us@tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1040 2.39 s 3.11 ms 2.30 ms ffffffffae808080 tasklist_lock (rwlock)
root@number:~# perf lock con -abl -L tasklist_lock -J 1ms@tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1025 24.72 s 31.01 ms 24.12 ms ffffffffae808080 tasklist_lock (rwlock)
root@number:~#
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250509171950.183591-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Howard Chu
|
9557c00076 |
perf record --off-cpu: Add --off-cpu-thresh option
Specify the threshold for dumping offcpu samples with --off-cpu-thresh,
the unit is milliseconds. Default value is 500ms.
Example:
perf record --off-cpu --off-cpu-thresh 824
The example above collects direct off-cpu samples where the off-cpu time
is longer than 824ms.
Committer testing:
After commenting out the end off-cpu dump to have just the ones that are
added right after the task is scheduled back, and using a threshould of
1000ms, we see some periods (the 5th column, just before "offcpu-time"
in the 'perf script' output) that are over 1000.000.000 nanoseconds:
root@number:~# perf record --off-cpu --off-cpu-thresh 10000
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 3.902 MB perf.data (34335 samples) ]
root@number:~# perf script
<SNIP>
Isolated Web Co 59932 [028] 63839.594437: 1000049427 offcpu-time:
7fe63c7976c2 __syscall_cancel_arch_end+0x0 (/usr/lib64/libc.so.6)
7fe63c78c04c __futex_abstimed_wait_common+0x7c (/usr/lib64/libc.so.6)
7fe63c78e928 pthread_cond_timedwait@@GLIBC_2.3.2+0x178 (/usr/lib64/libc.so.6)
5599974a9fe7 mozilla::detail::ConditionVariableImpl::wait_for(mozilla::detail::MutexImpl&, mozilla::BaseTimeDuration<mozilla::TimeDurationValueCalculator> const&)+0xe7 (/usr/lib64/fir>
100000000 [unknown] ([unknown])
swapper 0 [025] 63839.594459: 195724 cycles:P: ffffffffac328270 read_tsc+0x0 ([kernel.kallsyms])
Isolated Web Co 59932 [010] 63839.594466: 1000055278 offcpu-time:
7fe63c7976c2 __syscall_cancel_arch_end+0x0 (/usr/lib64/libc.so.6)
7fe63c78ba24 __syscall_cancel+0x14 (/usr/lib64/libc.so.6)
7fe63c804c4e __poll+0x1e (/usr/lib64/libc.so.6)
7fe633b0d1b8 PollWrapper(_GPollFD*, unsigned int, int) [clone .lto_priv.0]+0xf8 (/usr/lib64/firefox/libxul.so)
10000002c [unknown] ([unknown])
swapper 0 [027] 63839.594475: 134433 cycles:P: ffffffffad4c45d9 irqentry_enter+0x19 ([kernel.kallsyms])
swapper 0 [028] 63839.594499: 215838 cycles:P: ffffffffac39199a switch_mm_irqs_off+0x10a ([kernel.kallsyms])
MediaPD~oder #1 1407676 [027] 63839.594514: 134433 cycles:P: 7f982ef5e69f dct_IV(int*, int, int*)+0x24f (/usr/lib64/libfdk-aac.so.2.0.0)
swapper 0 [024] 63839.594524: 267411 cycles:P: ffffffffad4c6ee6 poll_idle+0x56 ([kernel.kallsyms])
MediaSu~sor #75 1093827 [026] 63839.594555: 332652 cycles:P: 55be753ad030 moz_xmalloc+0x200 (/usr/lib64/firefox/firefox)
swapper 0 [027] 63839.594616: 160548 cycles:P: ffffffffad144840 menu_select+0x570 ([kernel.kallsyms])
Isolated Web Co 14019 [027] 63839.595120: 1000050178 offcpu-time:
7fc9537cc6c2 __syscall_cancel_arch_end+0x0 (/usr/lib64/libc.so.6)
7fc9537c104c __futex_abstimed_wait_common+0x7c (/usr/lib64/libc.so.6)
7fc9537c3928 pthread_cond_timedwait@@GLIBC_2.3.2+0x178 (/usr/lib64/libc.so.6)
7fc95372a3c8 pt_TimedWait+0xb8 (/usr/lib64/libnspr4.so)
7fc95372a8d8 PR_WaitCondVar+0x68 (/usr/lib64/libnspr4.so)
7fc94afb1f7c WatchdogMain(void*)+0xac (/usr/lib64/firefox/libxul.so)
7fc947498660 [unknown] ([unknown])
7fc9535fce88 [unknown] ([unknown])
7fc94b620e60 WatchdogManager::~WatchdogManager()+0x0 (/usr/lib64/firefox/libxul.so)
fff8548387f8b48 [unknown] ([unknown])
swapper 0 [003] 63839.595712: 212948 cycles:P: ffffffffacd5b865 acpi_os_read_port+0x55 ([kernel.kallsyms])
<SNIP>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241108204137.2444151-2-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20250501022809.449767-10-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
43a6446998 |
perf record: Add --sample-mem-info option
There's no way to enable PERF_SAMPLE_DATA_SRC without PERF_SAMPLE_ADDR
which brings a lot of overhead due to the number of MMAP[2] records.
Let's add a new option to enable this information separately.
Committer testing:
# perf record -a --sample-mem-info
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.815 MB perf.data (2637 samples) ]
#
# perf evlist -v
cycles:P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER|DATA_SRC, read_format: ID|LOST, disabled: 1, freq: 1, precise_ip: 2, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER|DATA_SRC, read_format: ID|LOST, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -D |& grep -w PERF_RECORD_SAMPLE -A3 -m1
0 44675164447282 0x1a7590 [0x40]: PERF_RECORD_SAMPLE(IP, 0x4001): 107299/107299: 0xffffffffac4a5e11 period: 144 addr: 0
. data_src: 0x229080142
... thread: perf:107299
...... dso: /lib/modules/6.15.0-rc4+/build/vmlinux
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ravi Bangoria
|
fa1332a801 |
perf mem/c2c amd: Add ldlat support
'perf mem/c2c' uses IBS Op PMU on AMD platforms. IBS Op PMU on Zen5 uarch has added support for Load Latency filtering. Implement 'perf mem/c2c' --ldlat using IBS Op Load Latency filtering capability. Some subtle differences between AMD and other arch: o --ldlat is disabled by default on AMD o Supported values are 128 to 2048. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20250429035938.1301-4-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ravi Bangoria
|
eeefc13c71 |
perf amd ibs: Add Load Latency bits in raw dump
IBS OP PMU on Zen5 supports Load Latency filtering. Decode and dump Load Latency filtering related bits into perf script raw dump. Also add oneliner example in the perf-amd-ibs man page. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20250429035938.1301-2-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
1bec43f523 |
perf trace: Implement syscall summary in BPF
When -s/--summary option is used, it doesn't need (augmented) arguments
of syscalls. Let's skip the augmentation and load another small BPF
program to collect the statistics in the kernel instead of copying the
data to the ring-buffer to calculate the stats in userspace. This will
be much more light-weight than the existing approach and remove any lost
events.
Let's add a new option --bpf-summary to control this behavior. I cannot
make it default because there's no way to get e_machine in the BPF which
is needed for detecting different ABIs like 32-bit compat mode.
No functional changes intended except for no more LOST events. :)
$ sudo ./perf trace -as --summary-mode=total --bpf-summary sleep 1
Summary of events:
total, 6194 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 561 0 4530.843 0.000 8.076 520.941 18.75%
futex 693 45 4317.231 0.000 6.230 500.077 21.98%
poll 300 0 1040.109 0.000 3.467 120.928 17.02%
clock_nanosleep 1 0 1000.172 1000.172 1000.172 1000.172 0.00%
ppoll 360 0 872.386 0.001 2.423 253.275 41.91%
epoll_pwait 14 0 384.349 0.001 27.453 380.002 98.79%
pselect6 14 0 108.130 7.198 7.724 8.206 0.85%
nanosleep 39 0 43.378 0.069 1.112 10.084 44.23%
...
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250326044001.3503432-1-namhyung@kernel.org
[ Added fixup sent from Namhyung in response to my report to make it also dependent on CONFIG_TRACE ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
f19306f065 |
perf stat: Add mean, min, max and last --tpebs-mode options
Add command line configuration option for how retirement latency
events are combined.
The default "mean" gives the average of retirement latency.
"min" or "max" give the smallest or largest retirment latency times
respectively.
"last" uses the last retirment latency sample's time.
Committer notes:
Enclose parse_tpebs_mode() under HAVE_ARCH_X86_64_SUPPORT to match the
ifdef block where it is used, fixing the build in systems like:
20 5.60 debian:experimental-x-mips : FAIL gcc version 14.2.0 (Debian 14.2.0-1)
builtin-stat.c:2330:12: error: 'parse_tpebs_mode' defined but not used [-Werror=unused-function]
2330 | static int parse_tpebs_mode(const struct option *opt, const char *str,
| ^~~~~~~~~~~~~~~~
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Yujie Liu
|
fa9bc517af |
perf script: Update brstack syntax documentation
The following commits added new fields/flags to the branch stack field list: commit |
||
|
Namhyung Kim
|
bbf006d6d1 |
perf annotate: Add --code-with-type option.
This option is to show data type info in the regular (code) annotation.
It tries to find data type for each (memory) instruction in the
function. It'd be useful to see function-level memory access pattern
and also to debug the data type profiling result.
The output would be added at the end of the line and have "# data-type:"
prefix.
For now, it only works with --stdio mode for simplicity. I can work on
enabling it for TUI later.
$ perf annotate --stdio --code-with-type
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads/ppk (253 samples, percent: local period)
---------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81baa000 <check_preemption_disabled>:
0.00 : ffffffff81baa000: pushq %r12 # data-type: (stack operation)
0.00 : ffffffff81baa002: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81baa003: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff81baa004: subq $0x8, %rsp
18.00 : ffffffff81baa008: movl %gs:0x7e48893d(%rip), %ebx # 0x3294c <pcpu_hot+0xc> # data-type: struct pcpu_hot +0xc (cpu_number)
12.58 : ffffffff81baa00f: movl %gs:0x7e488932(%rip), %eax # 0x32948 <pcpu_hot+0x8> # data-type: struct pcpu_hot +0x8 (preempt_count)
0.00 : ffffffff81baa016: testl $0x7fffffff, %eax
0.00 : ffffffff81baa01b: je 0xffffffff81baa02c <check_preemption_disabled+0x2c>
0.00 : ffffffff81baa01d: addq $0x8, %rsp
0.00 : ffffffff81baa021: movl %ebx, %eax
14.19 : ffffffff81baa023: popq %rbx # data-type: (stack operation)
18.86 : ffffffff81baa024: popq %rbp # data-type: (stack operation)
12.10 : ffffffff81baa025: popq %r12 # data-type: (stack operation)
17.78 : ffffffff81baa027: jmp 0xffffffff81bc1170 <__x86_return_thunk>
6.49 : ffffffff81baa02c: callq *0xc9139e(%rip) # 0xffffffff8283b3d0 <pv_ops+0xf0> # data-type: (stack operation)
0.00 : ffffffff81baa032: testb $0x2, %ah
0.00 : ffffffff81baa035: je 0xffffffff81baa01d <check_preemption_disabled+0x1d>
0.00 : ffffffff81baa037: movq %rdi, %rbp
0.00 : ffffffff81baa03a: movq %gs:0x32940, %rax # data-type: struct pcpu_hot +0 (current_task)
0.00 : ffffffff81baa043: testb $0x4, 0x2f(%rax) # data-type: struct task_struct +0x2f (flags)
0.00 : ffffffff81baa047: je 0xffffffff81baa052 <check_preemption_disabled+0x52>
0.00 : ffffffff81baa049: cmpl $0x1, 0x3d0(%rax) # data-type: struct task_struct +0x3d0 (nr_cpus_allowed)
0.00 : ffffffff81baa050: je 0xffffffff81baa01d <check_preemption_disabled+0x1d>
0.00 : ffffffff81baa052: movq %gs:0x32940, %r12 # data-type: struct pcpu_hot +0 (current_task)
0.00 : ffffffff81baa05b: cmpw $0x0, 0x7f0(%r12) # data-type: struct task_struct +0x7f0 (migration_disabled)
0.00 : ffffffff81baa065: movq %rsi, (%rsp)
0.00 : ffffffff81baa069: jne 0xffffffff81baa01d <check_preemption_disabled+0x1d>
0.00 : ffffffff81baa06b: movl 0xe8dd13(%rip), %eax # 0xffffffff82a37d84 <system_state> # data-type: enum system_states +0
0.00 : ffffffff81baa071: testl %eax, %eax
0.00 : ffffffff81baa073: je 0xffffffff81baa01d <check_preemption_disabled+0x1d>
0.00 : ffffffff81baa075: incl %gs:0x7e4888cc(%rip) # 0x32948 <pcpu_hot+0x8> # data-type: struct pcpu_hot +0x8 (preempt_count)
0.00 : ffffffff81baa07c: movq $-0x7e14a100, %rdi
0.00 : ffffffff81baa083: callq 0xffffffff81148c40 <__printk_ratelimit> # data-type: (stack operation)
0.00 : ffffffff81baa088: testl %eax, %eax
0.00 : ffffffff81baa08a: je 0xffffffff81baa0d5 <check_preemption_disabled+0xd5>
0.00 : ffffffff81baa08c: movl 0x958(%r12), %r9d # data-type: struct task_struct +0x958 (pid)
0.00 : ffffffff81baa094: movq (%rsp), %rdx # data-type: char* +0
0.00 : ffffffff81baa098: movq %rbp, %rsi
0.00 : ffffffff81baa09b: leaq 0xb88(%r12), %r8 # data-type: struct task_struct +0xb88 (comm)
0.00 : ffffffff81baa0a3: movl %gs:0x7e48889e(%rip), %ecx # 0x32948 <pcpu_hot+0x8> # data-type: struct pcpu_hot +0x8 (preempt_count)
0.00 : ffffffff81baa0aa: andl $0x7fffffff, %ecx
0.00 : ffffffff81baa0b0: movq $-0x7dd3cdf0, %rdi
0.00 : ffffffff81baa0b7: subl $0x1, %ecx
0.00 : ffffffff81baa0ba: callq 0xffffffff81149340 <_printk> # data-type: (stack operation)
0.00 : ffffffff81baa0bf: movq 0x20(%rsp), %rsi
0.00 : ffffffff81baa0c4: movq $-0x7ddb8c7e, %rdi
0.00 : ffffffff81baa0cb: callq 0xffffffff81149340 <_printk> # data-type: (stack operation)
0.00 : ffffffff81baa0d0: callq 0xffffffff81b7ab60 <dump_stack> # data-type: (stack operation)
0.00 : ffffffff81baa0d5: decl %gs:0x7e48886c(%rip) # 0x32948 <pcpu_hot+0x8> # data-type: struct pcpu_hot +0x8 (preempt_count)
0.00 : ffffffff81baa0dc: jmp 0xffffffff81baa01d <check_preemption_disabled+0x1d>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Chun-Tse Shao
|
3c97e7b991 |
perf lock: Report owner stack in usermode
This patch parses `owner_lock_stat` into a RB tree, enabling ordered
reporting of owner lock statistics with stack traces. It also updates
the documentation for the `-o` option in contention mode, decouples `-o`
from `-t`, and issues a warning to inform users about the new behavior
of `-ov`.
Example output:
$ sudo ~/linux/tools/perf/perf lock con -abvo -Y mutex-spin -E3 perf bench sched pipe
...
contended total wait max wait avg wait type caller
171 1.55 ms 20.26 us 9.06 us mutex pipe_read+0x57
0xffffffffac6318e7 pipe_read+0x57
0xffffffffac623862 vfs_read+0x332
0xffffffffac62434b ksys_read+0xbb
0xfffffffface604b2 do_syscall_64+0x82
0xffffffffad00012f entry_SYSCALL_64_after_hwframe+0x76
36 193.71 us 15.27 us 5.38 us mutex pipe_write+0x50
0xffffffffac631ee0 pipe_write+0x50
0xffffffffac6241db vfs_write+0x3bb
0xffffffffac6244ab ksys_write+0xbb
0xfffffffface604b2 do_syscall_64+0x82
0xffffffffad00012f entry_SYSCALL_64_after_hwframe+0x76
4 51.22 us 16.47 us 12.80 us mutex do_epoll_wait+0x24d
0xffffffffac691f0d do_epoll_wait+0x24d
0xffffffffac69249b do_epoll_pwait.part.0+0xb
0xffffffffac693ba5 __x64_sys_epoll_pwait+0x95
0xfffffffface604b2 do_syscall_64+0x82
0xffffffffad00012f entry_SYSCALL_64_after_hwframe+0x76
=== owner stack trace ===
3 31.24 us 15.27 us 10.41 us mutex pipe_read+0x348
0xffffffffac631bd8 pipe_read+0x348
0xffffffffac623862 vfs_read+0x332
0xffffffffac62434b ksys_read+0xbb
0xfffffffface604b2 do_syscall_64+0x82
0xffffffffad00012f entry_SYSCALL_64_after_hwframe+0x76
...
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250227003359.732948-5-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
James Clark
|
5c496f1d67 |
perf list: Document -v option deduplication feature
-v disables deduplication of similarly suffixed PMUs so add it to the help and doc strings. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250226104111.564443-4-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Greg Kroah-Hartman
|
0cced76a02 |
perf tools: Fix up some comments and code to properly use the event_source bus
In sysfs, the perf events are all located in /sys/bus/event_source/devices/ but some places ended up hard-coding the location to be at the root of /sys/devices/ which could be very risky as you do not exactly know what type of device you are accessing in sysfs at that location. So fix this all up by properly pointing everything at the bus device list instead of the root of the sysfs devices/ tree. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/2025021955-implant-excavator-179d@gregkh Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Dmitry Vyukov
|
32ecca8d7a |
perf report: Add latency and parallelism profiling documentation
Describe latency and parallelism profiling, related flags, and differences with the currently only supported CPU-consumption-centric profiling. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/a13f270ed33cedb03ce9ebf9ddbd064854ca0f19.1739437531.git.dvyukov@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Dmitry Vyukov
|
2570c02c3a |
perf report: Add --latency flag
Add record/report --latency flag that allows to capture and show latency-centric profiles rather than the default CPU-consumption-centric profiles. For latency profiles record captures context switch events, and report shows Latency as the first column. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/e9640464bcbc47dde2cb557003f421052ebc9eec.1739437531.git.dvyukov@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Namhyung Kim
|
fc00897c8a |
perf trace: Add --summary-mode option
The --summary-mode option will select how to show the syscall summary at
the end. By default, it'll show the summary for each thread and it's
the same as if --summary-mode=thread is passed.
The other option is to show total summary, which is --summary-mode=total.
I'd like to have this instead of a separate option like --total-summary
because we may want to add a new summary mode (by cgroup) later.
$ sudo ./perf trace -as --summary-mode=total sleep 1
Summary of events:
total, 21580 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 1305 0 14716.712 0.000 11.277 551.529 8.87%
futex 1256 89 13331.197 0.000 10.614 733.722 15.49%
poll 669 0 6806.618 0.000 10.174 459.316 11.77%
ppoll 220 0 3968.797 0.000 18.040 516.775 25.35%
clock_nanosleep 1 0 1000.027 1000.027 1000.027 1000.027 0.00%
epoll_pwait 21 0 592.783 0.000 28.228 522.293 88.29%
nanosleep 16 0 60.515 0.000 3.782 10.123 33.33%
ioctl 510 0 4.284 0.001 0.008 0.182 8.84%
recvmsg 1434 775 3.497 0.001 0.002 0.174 6.37%
write 1393 0 2.854 0.001 0.002 0.017 1.79%
read 1063 100 2.236 0.000 0.002 0.083 5.11%
...
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250205205443.1986408-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Linus Torvalds
|
7685b334d1 |
perf-tools changes for v6.14
There are a lot of changes in the perf tools in this cycle.
build
-----
* Use generic syscall table to generate syscall numbers on supported archs.
* This also enables to get rid of libaudit which was used for syscall numbers.
* Remove python2 support as it's deprecated for years.
* Fix issues on static build with libzstd.
perf record
-----------
* Intel-PT supports "aux-action" config term to pause or resume tracing in
the aux-buffer. Users can start the intel_pt event as "started-paused" and
configure other events to control the Intel-PT tracing.
# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname
This requires the kernel support (which was added in v6.13).
perf lock
---------
* 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs with BPF.
Those dynamic locks would have "&" prefix in the name to distinguish them
from ordinary (static) locks.
# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol
2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)
This also requires the kernel/BPF support (which was added in v6.13).
perf ftrace
-----------
* 'perf ftrace latency' command gets a couple of options to support linear
buckets instead of exponential. Also it's possible to specify max and
min latency for the linear buckets.
# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |
# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236
* As you can see in the above example, it nows shows the statistics at the
end so that users can see the avg/max/min latencies easily.
* 'perf ftrace profile' command has --graph-opts option like 'perf ftrace
trace' so that it can control the tracing behaviors in the same way.
For example, it can limit the function call depth or threshold.
perf script
-----------
* Improve physical memory resolution in 'mem-phys-addr' script by parsing
/proc/iomem file.
# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0
Others
------
* 'perf test' gets --runs-per-test option to run the test cases repeatedly.
This would be helpful to see if it's flaky.
* Add 'parse_events' method to Python perf extension module, so that users
can use the same event parsing logic in the python code. One more step
towards implementing perf tools in Python. :)
* Support opening tracepoint events without libtraceevent. This will be
helpful if it won't use the tracing data like in 'perf stat'.
* Update ARM Neoverse N2/V2 JSON events and metrics
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ5AgiQAKCRCMstVUGiXM
g0WhAP43Dpfatrm1jicTyAogk5D/JrIMOgjGtrJJi5RXG/r0gwD8DSWFzLppS9xy
KGtjLHrN6v6BqR4DCubdlZmRfh9Qjgg=
=M0Kz
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools updates from Namhyung Kim:
"There are a lot of changes in the perf tools in this cycle.
build:
- Use generic syscall table to generate syscall numbers on supported
archs
- This also enables to get rid of libaudit which was used for syscall
numbers
- Remove python2 support as it's deprecated for years
- Fix issues on static build with libzstd
perf record:
- Intel-PT supports "aux-action" config term to pause or resume
tracing in the aux-buffer. Users can start the intel_pt event as
"started-paused" and configure other events to control the Intel-PT
tracing:
# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname
This requires kernel support (which was added in v6.13)
perf lock:
- 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs
with BPF. Those dynamic locks would have "&" prefix in the name to
distinguish them from ordinary (static) locks
# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol
2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)
This also requires kernel/BPF support (which was added in v6.13)
perf ftrace:
- 'perf ftrace latency' command gets a couple of options to support
linear buckets instead of exponential. Also it's possible to
specify max and min latency for the linear buckets:
# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |
# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236
- As you can see in the above example, it nows shows the statistics
at the end so that users can see the avg/max/min latencies easily
- 'perf ftrace profile' command has --graph-opts option like 'perf
ftrace trace' so that it can control the tracing behaviors in the
same way. For example, it can limit the function call depth or
threshold
perf script:
- Improve physical memory resolution in 'mem-phys-addr' script by
parsing /proc/iomem file
# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0
Others:
- 'perf test' gets --runs-per-test option to run the test cases
repeatedly. This would be helpful to see if it's flaky
- Add 'parse_events' method to Python perf extension module, so that
users can use the same event parsing logic in the python code. One
more step towards implementing perf tools in Python. :)
- Support opening tracepoint events without libtraceevent. This will
be helpful if it won't use the tracing data like in 'perf stat'
- Update ARM Neoverse N2/V2 JSON events and metrics"
* tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (176 commits)
perf test: Update event_groups test to use instructions
perf bench: Fix undefined behavior in cmpworker()
perf annotate: Prefer passing evsel to evsel->core.idx
perf lock: Rename fields in lock_type_table
perf lock: Add percpu-rwsem for type filter
perf lock: Fix parse_lock_type which only retrieve one lock flag
perf lock: Fix return code for functions in __cmd_contention
perf hist: Fix width calculation in hpp__fmt()
perf hist: Fix bogus profiles when filters are enabled
perf hist: Deduplicate cmp/sort/collapse code
perf test: Improve verbose documentation
perf test: Add a runs-per-test flag
perf test: Fix parallel/sequential option documentation
perf test: Send list output to stdout rather than stderr
perf test: Rename functions and variables for better clarity
perf tools: Expose quiet/verbose variables in Makefile.perf
perf config: Add a function to set one variable in .perfconfig
perf test perftool_testsuite: Return correct value for skipping
perf test perftool_testsuite: Add missing description
perf test record+probe_libc_inet_pton: Make test resilient
...
|
||
|
Chun-Tse Shao
|
e9188ae3cd |
perf lock: Add percpu-rwsem for type filter
percpu-rwsem was missing in man page. And for backward compatibility,
replace `pcpu-sem` with `percpu-rwsem` before parsing lock name.
Tested `./perf lock con -ab -Y pcpu-sem` and `./perf lock con -ab -Y
percpu-rwsem`
Fixes:
|
||
|
Ian Rogers
|
4e38f2814f |
perf test: Improve verbose documentation
Add a little more detail on the output expectations for each verbose level. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250110045736.598281-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Ian Rogers
|
1c0d9816e9 |
perf test: Add a runs-per-test flag
To detect flakes it is useful to run tests more than once. Add a runs-per-test flag that will run each test multiple times. Example output: ``` $ perf test -r 3 lbr -v 122: perf record LBR tests : Ok 122: perf record LBR tests : Ok 122: perf record LBR tests : Ok ``` Update the documentation for the runs-per-test option. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250110045736.598281-5-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Ian Rogers
|
4dd8bc4bf5 |
perf test: Fix parallel/sequential option documentation
The parallel option was removed in commit |
||
|
James Clark
|
ba113ecad8 |
perf docs: arm_spe: Document new discard mode
Document the flag along with PMU events to hint what it's used for and give an example with other useful options to get minimal output. Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Charlie Jenkins
|
3cc550f5bb |
perf tools: Remove dependency on libaudit
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is no longer needed. With the removal of the flag, the related GENERIC_SYSCALL_TABLE can also be removed. libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT was not defined, so libaudit is also no longer needed for any architecture. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Günther Noack <gnoack@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mickaël Salaün <mic@digikod.net> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
e5f2024cb9 |
perf ftrace profile: Add --graph-opts option
Like trace subcommand, it should be able to pass some options to control
the tracing behavior for the function graph tracer.
But some options are limited in order to maintain the internal behavior.
For example, it can limit the function call depth like below:
# perf ftrace profile --graph-opts depth=5 -- myprog
Committer testing:
root@number:~# perf ftrace profile --graph-opts thresh=1000 -- sleep 1
# Total (us) Avg (us) Max (us) Count Function
1001419.301 500709.650 1000032.000 2 x64_sys_call
1000032.000 1000032.000 1000032.000 1 __x64_sys_clock_nanosleep
1000032.000 1000032.000 1000032.000 1 common_nsleep
1000031.000 1000031.000 1000031.000 1 do_nanosleep
1000031.000 1000031.000 1000031.000 1 hrtimer_nanosleep
1000024.000 1000024.000 1000024.000 1 schedule
1387.208 1387.208 1387.208 1 __x64_sys_execve
1386.691 1386.691 1386.691 1 do_execveat_common.isra.0
1334.170 1334.170 1334.170 1 bprm_execve
1258.413 1258.413 1258.413 1 load_elf_binary
1123.068 1123.068 1123.068 1 begin_new_exec
1113.550 1113.550 1113.550 1 mmput
1109.237 1109.237 1109.237 1 exit_mmap
root@number:~# perf ftrace profile --graph-opts thresh=1200 -- sleep 1
# Total (us) Avg (us) Max (us) Count Function
1001448.204 500724.102 1000018.000 2 x64_sys_call
1000017.000 1000017.000 1000017.000 1 __x64_sys_clock_nanosleep
1000017.000 1000017.000 1000017.000 1 common_nsleep
1000017.000 1000017.000 1000017.000 1 hrtimer_nanosleep
1000016.000 1000016.000 1000016.000 1 do_nanosleep
1000012.000 1000012.000 1000012.000 1 schedule
1430.112 1430.112 1430.112 1 __x64_sys_execve
1429.581 1429.581 1429.581 1 do_execveat_common.isra.0
1376.289 1376.289 1376.289 1 bprm_execve
1301.743 1301.743 1301.743 1 load_elf_binary
root@number:~#
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250107224352.1128669-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Howard Chu
|
00c640595e |
perf docs: Add documentation for --force-btf option
The --force-btf option is intended for debugging purposes and is currently undocumented. Add documentation for it. Committer notes: We need a follow up patch expanding on what can be done via BTF and what isn't possible and thus needs further work to convert kernel C source code into tables that can then be associated with syscall integer args and struct members, as discussed in: https://lore.kernel.org/all/20241215190712.787847-3-howardchu95@gmail.com/T/#mcfbba653200775c59c730705229a49b34a153db7 Signed-off-by: Howard Chu <howardchu95@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20241215190712.787847-3-howardchu95@gmail.com Link: https://lore.kernel.org/all/20241215190712.787847-3-howardchu95@gmail.com/T/#mcfbba653200775c59c730705229a49b34a153db7 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
f8b301e0a4 |
perf intel-pt: Add documentation for pause / resume
Document the use of aux-action config term and provide a simple example. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241216070244.14450-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
f38ec2274c |
perf intel-pt: Improve man page format
Improve format of config terms and section references. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241216070244.14450-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
8a0f49a7f1 |
perf tools: Parse aux-action
Add parsing for aux-action to accept "pause", "resume" or "start-paused" values. "start-paused" is valid only for AUX area events. "pause" and "resume" are valid only for events grouped with an AUX area event as the group leader. However, like with aux-output, the events will be automatically grouped if they are not currently in a group, and the AUX area event precedes the other events. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241216070244.14450-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Gabriele Monaco
|
690a052a6d |
perf ftrace latency: Add --max-latency option
This patch adds a max-latency option as discussed, in case the number of
buckets is more than 22, we don't observe the setting (for now, let's
say).
By default or if 0 is passed, the value is automatically determined
based on the number of buckets, range and minimum, so that we fill all
available buffers (equivalent to the behaviour before this patch).
We now get something like this:
# perf ftrace latency --bucket-range=20 \
--min-latency 10 \
--max-latency=100 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 10 us | 1731 | ################ |
10 - 30 us | 1 | |
30 - 50 us | 0 | |
50 - 70 us | 0 | |
70 - 90 us | 0 | |
90 - 100 us | 0 | |
100 - ... us | 0 | |
Note the maximum is observed also if it doesn't cover completely a full
range (the second to last range is 10us long to let the last start at
100 sharp), this looks to me more sensible and eases the computations,
since we don't need to account for the range while filling the buckets.
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
08b875b6bf |
perf ftrace latency: Introduce --min-latency to narrow down into a latency range
Things below and over will be in the first and last, outlier, buckets.
Without it:
# perf ftrace latency --use-nsec --use-bpf \
--bucket-range=200 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 200 ns | 0 | |
200 - 400 ns | 44 | |
400 - 600 ns | 291 | # |
600 - 800 ns | 506 | ## |
800 - 1000 ns | 148 | |
1.00 - 1.20 us | 581 | ## |
1.20 - 1.40 us | 2199 | ########## |
1.40 - 1.60 us | 1048 | #### |
1.60 - 1.80 us | 1448 | ###### |
1.80 - 2.00 us | 1091 | ##### |
2.00 - 2.20 us | 517 | ## |
2.20 - 2.40 us | 318 | # |
2.40 - 2.60 us | 370 | # |
2.60 - 2.80 us | 271 | # |
2.80 - 3.00 us | 150 | |
3.00 - 3.20 us | 85 | |
3.20 - 3.40 us | 48 | |
3.40 - 3.60 us | 40 | |
3.60 - 3.80 us | 22 | |
3.80 - 4.00 us | 13 | |
4.00 - 4.20 us | 14 | |
4.20 - ... us | 626 | ## |
#
# perf ftrace latency --use-nsec --use-bpf \
--bucket-range=20 --min-latency=1200 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1200 ns | 1243 | ##### |
1.20 - 1.22 us | 141 | |
1.22 - 1.24 us | 202 | |
1.24 - 1.26 us | 209 | |
1.26 - 1.28 us | 219 | |
1.28 - 1.30 us | 208 | |
1.30 - 1.32 us | 245 | # |
1.32 - 1.34 us | 246 | # |
1.34 - 1.36 us | 224 | # |
1.36 - 1.38 us | 219 | |
1.38 - 1.40 us | 206 | |
1.40 - 1.42 us | 190 | |
1.42 - 1.44 us | 190 | |
1.44 - 1.46 us | 146 | |
1.46 - 1.48 us | 140 | |
1.48 - 1.50 us | 125 | |
1.50 - 1.52 us | 115 | |
1.52 - 1.54 us | 102 | |
1.54 - 1.56 us | 87 | |
1.56 - 1.58 us | 90 | |
1.58 - 1.60 us | 85 | |
1.60 - ... us | 5487 | ######################## |
#
Now we want focus on the latencies starting at 1.2us, with a finer
grained range of 20ns:
This is all on a live system, so statistically interesting, but not
narrowing down on the same numbers, so a 'perf ftrace latency record'
seems interesting to then use all on the same snapshot of latencies.
A --max-latency counterpart should come next, at first limiting the
max-latency to 20 * bucket-size, as we have a fixed buckets array with
20 + 2 entries (+ for the outliers) and thus would need to make it
larger for higher latencies.
We also may need a way to ask for not considering the out of range
values (first and last buckets) when drawing the buckets bars.
Co-developed-by: Gabriele Monaco <gmonaco@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-4-acme@kernel.org
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
e8536dd47a |
perf ftrace latency: Introduce --bucket-range to ask for linear bucketing
In addition to showing it exponentially, using log2() to figure out the
histogram index, allow for showing it linearly:
The preexisting more, the default:
# perf ftrace latency --use-nsec --use-bpf \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1 ns | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 0 | |
64 - 128 ns | 238 | # |
128 - 256 ns | 1704 | ########## |
256 - 512 ns | 672 | ### |
512 - 1024 ns | 4458 | ########################## |
1 - 2 us | 677 | #### |
2 - 4 us | 5 | |
4 - 8 us | 0 | |
8 - 16 us | 0 | |
16 - 32 us | 0 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - ... ms | 0 | |
#
The new histogram mode:
# perf ftrace latency --bucket-range=150 --use-nsec --use-bpf \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1 ns | 0 | |
1 - 151 ns | 265 | # |
151 - 301 ns | 1797 | ########### |
301 - 451 ns | 258 | # |
451 - 601 ns | 289 | # |
601 - 751 ns | 2049 | ############# |
751 - 901 ns | 967 | ###### |
901 - 1051 ns | 513 | ### |
1.05 - 1.20 us | 114 | |
1.20 - 1.35 us | 559 | ### |
1.35 - 1.50 us | 189 | # |
1.50 - 1.65 us | 137 | |
1.65 - 1.80 us | 32 | |
1.80 - 1.95 us | 2 | |
1.95 - 2.10 us | 0 | |
2.10 - 2.25 us | 1 | |
2.25 - 2.40 us | 1 | |
2.40 - 2.55 us | 0 | |
2.55 - 2.70 us | 0 | |
2.70 - 2.85 us | 0 | |
2.85 - 3.00 us | 1 | |
3.00 - ... us | 4 | |
#
Co-developed-by: Gabriele Monaco <gmonaco@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-3-acme@kernel.org
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
161c3402fd |
perf config: Fix trival typo 'an' -> 'can'
Just a trivial typo, should be 'can', did a spell check on the rest of the file just in case, nothing more stood out. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
a6e8a58de6 |
perf disasm: Allow configuring what disassemblers to use
The perf tools annotation code used for a long time parsing the output
of binutils's objdump (or its reimplementations, like llvm's) to then
parse and augment it with samples, allow navigation, etc.
More recently disassemblers from the capstone and llvm (libraries, not
parsing the output of tools using those libraries to mimic binutils's
objdump output) were introduced.
So when all those methods are available, there is a static preference
for a series of attempts of disassembling a binary, with the 'llvm,
capstone, objdump' sequence being hard coded.
This patch allows users to change that sequence, specifying via a 'perf
config' 'annotate.disassemblers' entry which and in what order
disassemblers should be attempted.
As alluded to in the comments in the source code of this series, this
flexibility is useful for users and developers alike, elliminating the
requirement to rebuild the tool with some specific set of libraries to
see how the output of disassembling would be for one of these methods.
root@x1:~# rm -f ~/.perfconfig
root@x1:~# perf annotate -v --stdio2 update_load_avg
<SNIP>
symbol__disassemble:
filename=/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux,
sym=update_load_avg, start=0xffffffffb6148fe0, en>
annotating [0x6ff7170]
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux :
[0x7407ca0] update_load_avg
Disassembled with llvm
annotate.disassemblers=llvm,capstone,objdump
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.): 5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent 0xffffffff81148fe0 <update_load_avg>:
1.61 pushq %r15
pushq %r14
1.00 pushq %r13
movl %edx,%r13d
1.90 pushq %r12
pushq %rbp
movq %rsi,%rbp
pushq %rbx
movq %rdi,%rbx
subq $0x18,%rsp
15.14 movl 0x1a4(%rdi),%eax
root@x1:~# perf config annotate.disassemblers=capstone
root@x1:~# cat ~/.perfconfig
# this file is auto-generated.
[annotate]
disassemblers = capstone
root@x1:~#
root@x1:~# perf annotate -v --stdio2 update_load_avg
<SNIP>
Disassembled with capstone
annotate.disassemblers=capstone
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.): 5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent 0xffffffff81148fe0 <update_load_avg>:
1.61 pushq %r15
pushq %r14
1.00 pushq %r13
movl %edx,%r13d
1.90 pushq %r12
pushq %rbp
movq %rsi,%rbp
pushq %rbx
movq %rdi,%rbx
subq $0x18,%rsp
15.14 movl 0x1a4(%rdi),%eax
root@x1:~# perf config annotate.disassemblers=objdump,capstone
root@x1:~# perf config annotate.disassemblers
annotate.disassemblers=objdump,capstone
root@x1:~# cat ~/.perfconfig
# this file is auto-generated.
[annotate]
disassemblers = objdump,capstone
root@x1:~# perf annotate -v --stdio2 update_load_avg
Executing: objdump --start-address=0xffffffff81148fe0 \
--stop-address=0xffffffff811497aa \
-d --no-show-raw-insn -S -C "$1"
Disassembled with objdump
annotate.disassemblers=objdump,capstone
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.): 5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent
Disassembly of section .text:
ffffffff81148fe0 <update_load_avg>:
#define DO_ATTACH 0x4
ffffffff81148fe0 <update_load_avg>:
#define DO_ATTACH 0x4
#define DO_DETACH 0x8
/* Update task and its cfs_rq load average */
static inline void update_load_avg(struct cfs_rq *cfs_rq,
struct sched_entity *se,
int flags)
{
1.61 push %r15
push %r14
1.00 push %r13
mov %edx,%r13d
1.90 push %r12
push %rbp
mov %rsi,%rbp
push %rbx
mov %rdi,%rbx
sub $0x18,%rsp
}
/* rq->task_clock normalized against any time
this cfs_rq has spent throttled */
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
if (unlikely(cfs_rq->throttle_count))
15.14 mov 0x1a4(%rdi),%eax
root@x1:~#
After adding a way to select the disassembler from the command line a
'perf test' comparing the output of the various diassemblers should be
introduced, to test these codebases.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20241111151734.1018476-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
6d5d90a6ab |
perf docs: Document tool and hwmon events
Add a few paragraphs on tool and hwmon events. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: James Clark <james.clark@linaro.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20241109003759.473460-8-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |