Previously we were filtering out only upper unsupported sampling rates.
This patch adds filtering of the lower unsupported sampling rates. As a
result there is 1:1 mapping between altsetting and supported rates.
The issue was found on a Scarlett 3rd Gen card (see linked bug), but the
same filtering is likely needed for the Scarlett 1st and 2nd Gen as well
as the older Clarett cards which lacks Valid Alternate Setting Control.
Patch was not tested on a real hardware.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://patch.msgid.link/20250630013357.1327420-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Within the UAC descriptor, there is information describing the size of a
sample (bSubframeSize/bSubslotSize) and the number of relevant bits
(bBitResolution). Currently, fmt_bits carries only the bit resolution,
however, some offloading entities may also require the overall size of the
sample. Save this information in a separate parameter, as depending on the
UAC format type, the sample size can not easily be decoded from other
existing parameters.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-11-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for Presonus Studio 1824c, a usb interface
that's UAC2 compliant and it is enabled by identifying the device
ID 194f:010d and works with the code brought in by the 1810c change from
Nick Kossifidis in 2020-02-15.
More infos on the card:
https://www.presonus.com/products/Studio-1824c
Signed-off-by: Amin Dandache <amin.dandache@gmail.com>
Link: https://patch.msgid.link/20250227133027.21148-1-git@amin85.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the explicit "1 << x", use BIT() macro for one bit values.
This will improve the readability and also avoids the possible bad
value for 31bit shift.
Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models. This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().
Reported-by: John Humlick <john@humlick.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's been reported that the recent kernel can't probe the PCM devices
on Roland VS-100 properly, and it turned out to be a regression by the
recent addition of the bit shift range check for the format bits.
In the old code, we just did bit-shift and it resulted in zero, which
is then corrected to the standard PCM format, while the new code
explicitly returns an error in such a case.
For addressing the regression, relax the check and fallback to the
standard PCM type (with the info output).
Fixes: 43d5ca88df ("ALSA: usb-audio: Fix potential out-of-bounds shift")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084
Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.
The device is basically just the HX-Stomp with some more buttons on
the face. I've done some recording with it after adding it, and it
seems to function properly with this fix. The Midi features appear to
be working as well.
[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rate validation at the device probe is applied only to the
specific devices (currently only for MOTU devices), and this check can
be moved to quirk_flags gracefully, too.
Link: https://lore.kernel.org/r/20210729074404.19728-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe().
Fixes: 93db51d06b ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced sample rate validation code seems causing a
problem on some devices; namely, after performing this, the bus gets
screwed and it influences even on other USB devices.
As a quick workaround, perform it only for the necessary devices;
currently MOTU devices are known to need the valid altset checks, so
filter out other devices.
Fixes: 93db51d06b ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
Link: https://lore.kernel.org/r/20210123155842.22652-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are multiple places in format.c performing the similar code for
setting the rate_min, rate_max and rates fields. This patch unifies
those in a helper function and calls it at the end of the parser phase
so that all rate_table entries have been already determined.
No functional changes, just a minor code refactoring.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file debug.h contains a simple macro for debug prints, and it's
used only in two places, the format parser and the hw_params rules.
The former actually should print a more informative message instead,
so the only users are the hw_parmas rules.
This patch moves the contents of debug.h into the hw_params rules
local code and remove the unneeded includes. Also, the debug print in
the format parser is replaced with the information print with more
useful information, and the raw printk() call is replaced with
pr_debug().
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current driver code assumes blindly that all found sample rates for
the same endpoint from the UAC2 and UAC3 descriptors can be used no
matter which altsetting, but actually this was wrong: some devices
accept only limited sample rates in each altsetting. For determining
which altsetting supports which rate, we need to verify each sample rate
and check the validity via UAC2_AS_VAL_ALT_SETTINGS. This control
reports back the available altsettings as a bitmap.
This patch implements the missing piece above, the verification and
reconstructs the sample rate tables based on the result.
An open question is how to deal with the altsettings that ended up
with no valid sample rates after verification. At least, there is a
device that showed this problem although the sample rates did work in
the later usage (see bug link). For now, we accept such an altset as
is, assuming that it's a firmware bug.
Reported-by: Dylan Robinson <dylan_robinson@motu.com>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
Link: https://lore.kernel.org/r/20201123085347.19667-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently released Line6 Pod Go requires static clock rate quirk to make
its usb audio interface working. Added its usb id to the list of similar
line6 devices.
Signed-off-by: Lukasz Halman <lukasz.halman@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201020061409.GA24382@TAG009442538903
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the Line6 devices, the Rode Rodecaster Pro does not support
UAC2_CS_RANGE and only supports a sample rate of 48 kHz.
Tested against a Rode Rodecaster Pro.
Tested-by: Christopher Swenson <swenson@swenson.io>
Signed-off-by: Christopher Swenson <swenson@swenson.io>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ebdb9e72-9649-0b5e-b9b9-d757dbf26927@swenson.io
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many Focusrite devices supports a limited set of sample rates per
altsetting. These includes audio interfaces with ADAT ports:
- Scarlett 18i6, 18i8 1st gen, 18i20 1st gen;
- Scarlett 18i8 2nd gen, 18i20 2nd gen;
- Scarlett 18i8 3rd gen, 18i20 3rd gen;
- Clarett 2Pre USB, 4Pre USB, 8Pre USB.
Maximum rate is exposed in the last 4 bytes of Format Type descriptor
which has a non-standard bLength = 10.
Tested-by: Alexey Skobkin <skobkin-ru@ya.ru>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merging the UAC2 effect unit parser improvement. As it's based on the
previous usb-audio driver fix, it was deviated from for-next branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for Presonus Studio 1810c, a usb interface
that's UAC2 compliant with a few quirks and a few extra hw-specific
controls. I've tested all 3 altsettings and the added switch
controls and they work as expected.
More infos on the card:
https://www.presonus.com/products/Studio-1810c
Note that this work is based on packet inspection with
usbmon. I just wanted to get this card to work for using
it on our open-source radio station:
https://github.com/UoC-Radio
v2 address issues reported by Takashi:
* Properly get/set enum type controls
* Prevent race condition on switch_get/set
* Various control naming changes
* Various coding style fixes
v3 improve readability of sample rate filtering
and some other minor changes.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Link: https://lore.kernel.org/r/5e47481a.1c69fb81.befb3.8dac@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.
This is to deal with some Denon DJ controllers that always reports that
clock is invalid.
Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jabra Evolve 65 headset appears as if supporting lower rates than
48kHz, but it actually doesn't work but with 48kHz for playback.
This patch applies a workaround to enforce the 48kHz like LINE6
devices already did. The workaround is put in a unified helper
function, set_fixed_rate(), to be called from both places now.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149
Link: https://lore.kernel.org/r/20200211111419.5895-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With firmware 2.82 Line6 changed the usb id of some of the Helix
devices but the quirks is still needed.
Add it to the quirk list for line6 helix family of devices.
Thanks to Jens for pointing out the missing ids.
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Link: https://lore.kernel.org/r/20200125150917.5040-1-nick83ola@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For consistency reason, make all hex numbers with lower alphabets for
USB ID entries. It improves grep-ability and reduces careless
mistakes.
Link: https://lore.kernel.org/r/20200105081900.21870-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Line6 Helix and HX stomp devices don't support retrieving
the number of clock sample rate.
Add a quirk to set it to 48Khz by default.
[ fixed wrong variable initialization changes by tiwai ]
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At least some USB devices use (MSB-aligned) audio format larger
than the actual resolution of the device. In order to expose the
actual device resolution (bBitResolution), add extra field to the
procfs stream info interface.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here is a collection of small fixes on top of the previous update.
All small and obvious fixes. Mostly for usual suspects, USB-audio and
HD-audio, but a few trivial error handling fixes for misc drivers as
well.
-----BEGIN PGP SIGNATURE-----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=XDCD
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of small fixes on top of the previous update.
All small and obvious fixes. Mostly for usual suspects, USB-audio and
HD-audio, but a few trivial error handling fixes for misc drivers as
well"
* tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Always create the interrupt pipe for the mixer
ALSA: usb-audio: Add insertion control for UAC3 BADD
ALSA: usb-audio: Change in connectors control creation interface
ALSA: usb-audio: Add bi-directional terminal types
ALSA: lx6464es: add error handling for pci_ioremap_bar
ALSA: sonicvibes: add error handling for snd_ctl_add
ALSA: usb-audio: Remove explicitly listed Mytek devices
ALSA: usb-audio: Generic DSD detection for XMOS-based implementations
ALSA: usb-audio: Add native DSD support for Mytek DACs
ALSA: hda/realtek - Add shutup hint
ALSA: usb-audio: Disable the quirk for Nura headset
ALSA: hda: add dock and led support for HP ProBook 640 G4
ALSA: hda: add dock and led support for HP EliteBook 830 G5
ALSA: emu10k1: add error handling for snd_ctl_add
ALSA: fm801: add error handling for snd_ctl_add
Add new mostly generic code with Mytek VID to support native DSD mode.
This implementation should be easier to maintain when manufacturers
release new products.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We recently made "format" a u64 variable so now static checkers complain
that this shift will wrap around if format is more than 31. I don't
think it makes a difference for runtime, but it's simple to silence the
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently released USB Audio Class 3.0 specification
introduces many significant changes comparing to
previous versions, like
- new Power Domains, support for LPM/L1
- new Cluster descriptor
- changed layout of all class-specific descriptors
- new High Capability descriptors
- New class-specific String descriptors
- new and removed units
- additional sources for interrupts
- removed Type II Audio Data Formats
- ... and many other things (check spec)
It also provides backward compatibility through
multiple configurations, as well as requires
mandatory support for BADD (Basic Audio Device
Definition) on each ADC3.0 compliant device
This patch adds initial support of UAC3 specification
that is enough for Generic I/O Profile (BAOF, BAIF)
device support from BADD document.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kmalloc already print similar error once failing to alloc
enough memory, so let's remove this dump here.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Roland SC-D70 reports its device class as vendor specific class and
the quirk QUIRK_AUDIO_FIXED_ENDPOINT was used for audio output.
In the quirks table the sampling rate was hard-coded to 44100 Hz
and therefore not worked when the sound module was in 48000 Hz mode.
In this change the quirk is changed to QUIRK_AUDIO_STANDARD_INTERFACE
but as the sound module reports incorrect bSubframeSize in its
descriptors, additional change is made in format.c to detect it and
to override it (which uses the existing code for Edirol SD-90).
Tested both when the sound module was in 44100 Hz mode and 48000 Hz
mode and both audio input and output. MIDI related part of the driver
is not touched.
Signed-off-by: Takamichi Horikawa <takamichiho@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.
Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Creative Live! Cam Vista IM (VF0420) reports rate of 16kHz while working
at 8kHz. The patch adds its USB ID to the existing quirk.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of reading bInterfaceProtocol from the descriptor whenever it's
needed, store this value in the audioformat structure. Besides
simplifying some code, this will allow us to correctly handle vendor-
specific devices where the descriptors are marked with other values.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add a function to handle conversion from snd_pcm_format_t
to bitwise with proper typing.
Change such conversions to use this function and silence sparse
warnings.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, none of the UAC standards provides a way to identify DSD
(Direct Stream Digital) formats. Hence, this patch adds a quirks
handler to identify USB interfaces that are capable of handling DSD.
That quirks handler can augment the already parsed formats bit-field,
by any of the new SNDRV_PCM_FMTBIT_DSD_{U8_U16} and setting the dsd_dop
flag in the audio format, if the driver should take care for the DOP
byte stuffing.
The only devices that are known to work with this are the ones with
a 'Playback Designs' vendor id.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the check that parse_audio_format_rates_v2() do after
receiving the clock source entity ID directly into the find
function and add a validation flag to the function.
This patch does not introduce any logic flow change.
It is provided to allow introducing automatic clock switching
easier later. By moving this uac_clock_source_is_valid callsite,
2 additional callsites can be avoided.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAC2 compliant audio devices may announce the capability to transport
raw audio data on their endpoints. Catch this and handle it as
'special' stream on the ALSA side.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This field may use up to 32 bits, so it should be handled as unsigned
int.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
