The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-2-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-2-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Member wcd938x_priv.variant is assigned in probe() function and used
immediately thereafter, thus it can be just a local variable for less
variables stored in 'struct wcd938x_priv' device-wide state.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-7-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd938x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-6-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Static arrays/structs for regmap configuration like 'struct
reg_default', 'struct reg_sequence' and others are not modified so can
be changed to const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-1-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec driver data is allocated using kzalloc() so there's no need to
clear the mux setup flag when mux selection fails during probe.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250415074145.7202-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change added support for looking up an optional mux control
before falling back to gpio control for us-euro plug selection.
The mux framework does however not yet support optional muxes and an
error message is now incorrectly logged on machines like the Lenovo
ThinkPad X13s which do not have one:
wcd938x_codec audio-codec: /audio-codec: failed to get mux-control (0)
Suppress the bogus error and add the missing mux error handling by
making sure that the 'mux-controls' DT property is present before
looking up the mux control.
Fixes: eec611d26f ("ASoC: codecs: wcd938x: add mux control support for hp audio mux")
Link: https://lore.kernel.org/lkml/Z-z_ZAyVBK5ui50k@hovoldconsulting.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250415074145.7202-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from srinivas.kandagatla@linaro.org:
On Lenovo ThinkPad T14s, the headset is connected via a HiFi Switch to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.
This patchset adds required bindings and changes to codec and dts to
tnable the regulator required to power this switch along with wiring up
gpio that control the headset switching.
Without this patchset, there will be lots of noise on headset and mic
will not we functional.
On some platforms to minimise pop and click during switching between
CTIA and OMTP headset an additional HiFi mux is used. Most common
case is that this switch is switched on by default, but on some
platforms this needs a regulator enable.
move to using mux control to enable both regulator and handle gpios,
deprecate the usage of gpio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250327100633.11530-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove confusing and unused argument in swap_gnd_mic api, the second
argument active is not really used, and always set to true in the mbhc
drivers.
The callback itself is used to toggle the gnd_mic lines when a cross
connection is detected by mbhc circuits, so there is no need of this
argument.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250327100633.11530-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.
The in-tree DTS files have the right polarity set up already so we
can expect this to "just work".
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://patch.msgid.link/20250324-wcd-gpiod-v2-2-773f67ce3b56@nxp.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: linux-sound@vger.kernel.org
Link: https://patch.msgid.link/20250319092951.37667-36-jirislaby@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "ADC2_BCS Disable Switch" control does basically nothing: sets field
in driver's private data structure which is never read again to
configure hardware. Drop the control as it has no effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523124808.42923-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a define for MIC bias registers enable mask called
WCD938X_MICB_EN_MASK, which is already used to handle all four MIC1-4
biases in wcd938x_mbhc_micb_adjust_voltage().
Use the same define also in wcd938x_mbhc_micb_en_status() for MIC2 to
have unified, simpler approach.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe calls wcd938x_populate_dt_data() which already prints all the
error cases with dev_err_probe(), so skip the additional dev_err().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WCD938x sound codec driver ignores return status of getting regulators
and returns EINVAL instead of EPROBE_DEFER. If regulator provider
probes after the codec, system is left without probed audio:
wcd938x_codec audio-codec: wcd938x_probe: Fail to obtain platform data
wcd938x_codec: probe of audio-codec failed with error -22
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15 ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc: <stable@vger.kernel.org> # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver array in wcd938x driver has two entries whose order
must match order of wcd938x->sdw_priv array. The wcd938x_bind() and
wcd938x_codec_set_sdw_stream() rely on this order. wcd938x->sdw_priv
array is indexed by enum with AIF1_PB and AIF1_CAP, so use the same
defines instead of raw numners for snd_soc_dai_driver array.
No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019144108.42853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to balance the runtime PM operations, including the disable
count, on driver unbind.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to disable and free the regulators on probe errors and on
driver unbind.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing code to release resources on bind errors, including the
references taken by wcd938x_sdw_device_get() which also need to be
dropped on unbind().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to deregister the component before tearing down the resources
it depends on during unbind().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the bogus error handling for a soundwire device backcast during
bind() that cannot fail.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocation of the clash control structure may fail so add the missing
error handling to avoid dereferencing an error pointer.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
dB range for HPHL and HPHR gains are from +6dB to -30dB in steps of
1.5dB with register values range from 0 to 24.
Current code maps these dB ranges incorrectly, fix them to allow proper
volume setting.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705125723.40464-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the soundwire device used for register accesses has been
enumerated and initialised before trying to read the codec variant
during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
in case the soundwire device has not yet been initialised, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20230701094723.29379-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
When investigating a race in the wcd938x driver I noticed that the MBHC
impedance measurements where printed at error loglevel which is clearly
wrong.
Fix that, and clean up the logging somewhat by using dev_printk() and
addressing some style issues.
Included are also two patches that drop the bogus inline keywords from
the functions involved.
Pass the component structure also to the
wcd938x_mbhc_get_result_params() helper so that the component device can
be used for logging consistently.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler is generally better at deciding what functions should be
inlined than driver authors are.
Drop the bogus inline keyword from two functions that were neither very
small or used in a single place.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Demote the MBHC impedance measurement printk, which is not an error
message, from error to debug level.
While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.
Fixes: bcee7ed09b ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to resume the codec and soundwire device before trying to read
the codec variant and configure the device during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
when the soundwire device happens to be suspended, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230630120318.6571-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The WCD938x comes with three devices on two Linux drivers:
1. RX Soundwire device (wcd938x-sdw.c driver),
2. TX Soundwire device, which is used to access devices via regmap (also
wcd938x-sdw.c driver),
3. platform device (wcd938x.c driver) - glue and component master,
actually having most of the code using TX Soundwire device regmap.
When RX and TX Soundwire devices probe, the component master (platform
device) bind tries to write micbias configuration via TX Soundwire
regmap. This might happen before TX Soundwire enumerates, so the regmap
access fails. On Qualcomm SM8550 board with WCD9385:
qcom-soundwire 6d30000.soundwire-controller: Qualcomm Soundwire controller v2.0.0 Registered
wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops)
wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops)
qcom-soundwire 6ad0000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow
Fix the issue by:
1. Moving the regmap creation from platform device to TX Soundwire
device. The regmap settings are moved as-is with one difference:
making the wcd938x_regmap_config const.
2. Using regmap in cache only mode till the actual TX Soundwire device
enumerates and then sync the regmap cache.
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230503144102.242240-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-57-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202170644.1814720-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to set type_base here: the chip doesn't set
num_type_regs and none of the IRQs have type information so it's
not possible for regmap-irq to configure IRQ types.
Type registers are also deprecated in regmap-irq, so any IRQ type
support in the future should be implemented using config registers
instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220603122526.3914942-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-37-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aDoACgkQJNaLcl1U
h9BPKgf/XSKCt67IzrbnI9UXp1Q13C54z57e+nGr4LBSRraT/WwdXFevefC6JZDq
bYQWhigFrQyyYSyxVJYIvtywXXpMzJ1ypzHqcBGmqCufoX0zoaRwTFYg60yiYqdy
cDsX82/1bhI9Dp3RWaEKaMyaa9FI0Kr3WTA6EKdo592u0hxj4UcK51r7qsp1JpsR
tQWGMYqqwtajhamFgrIlKiJDDVnv2qEhrWdho5W/FPAby+fsJ6VJBMhwEx/F7cXu
Mjfa0k2MoMAlNX9DxtIHweVECaN32HJsytrbgUAdYnBoGaZNkXwLwvyp9RIeDAMP
NZ+w3lwFLw1N8S2ho6kqtDpO+tJU0Q==
=Y6/E
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
