A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The refactoring of the assoc link handling in order to
support multi-link reconfiguration broke the setting
of the assoc link ID, and thus resulted in the wrong
BSS "use_for" value being selected. Fix that for both
association and ML reconfiguration.
Fixes: 720fa448f5 ("wifi: nl80211: Split the links handling of an association request")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.7b233d769c32.I62fd04a8667dd55cedb9a1c0414cc92dd098da75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
-----BEGIN PGP SIGNATURE-----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=Dere
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
bugfixes for 6.14:
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: disable multi-link reconfiguration
wifi: cfg80211: regulatory: improve invalid hints checking
wifi: brcmfmac: keep power during suspend if board requires it
wifi: mac80211: Fix sparse warning for monitor_sdata
wifi: mac80211: fix vendor-specific inheritance
wifi: mac80211: fix MLE non-inheritance parsing
wifi: iwlwifi: Fix A-MSDU TSO preparation
wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
wifi: iwlwifi: limit printed string from FW file
wifi: iwlwifi: mvm: use the right version of the rate API
wifi: iwlwifi: mvm: don't try to talk to a dead firmware
wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
wifi: iwlwifi: mvm: clean up ROC on failure
wifi: iwlwifi: fw: avoid using an uninitialized variable
wifi: iwlwifi: fw: allocate chained SG tables for dump
wifi: mac80211: remove debugfs dir for virtual monitor
wifi: mac80211: Cleanup sta TXQs on flush
wifi: nl80211: reject cooked mode if it is set along with other flags
====================
Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both the APIs in cfg80211 and the implementation in mac80211
aren't really ready yet, we have a large number of fixes. In
addition, it's not possible right now to discover support for
this feature from userspace. Disable it for now, there's no
rush.
Link: https://patch.msgid.link/20250303110538.fbeef42a5687.Iab122c22137e5675ebd99f5c031e30c0e5c7af2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a6 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, as multi-link operation(MLO) is not supported for mesh,
reorganize the sinfo structure for mesh-specific fields and embed
mesh related NL attributes together in organized view.
This will allow for the simplified reorganization of sinfo structure
for link level in a subsequent patch to add support for MLO station
statistics.
No functionality changes added.
Pahole summary before the reorg of sinfo structure:
- size: 256, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 17
- paddings: 2, sum paddings: 2
- forced alignments: 1, forced holes: 1, sum forced holes: 1
Pahole summary after the reorg of sinfo structure:
- size: 248, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 9
- paddings: 2, sum paddings: 2
- forced alignments: 1, last cacheline: 56 bytes
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219203240.141272-1-eahariha@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 66f7ac50ed ("nl80211: Add monitor interface configuration flags")
Cc: stable@vger.kernel.org
Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Unconditionally start to refuse creating cooked monitor interfaces to
phase them out.
There is no feature flag for drivers to opt-in for cooked monitor and
all known users are using/preferring the modern API since the hostapd
release 1.0 in May 2012.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Existing primitive has several problems:
1) calling conventions are clumsy - it returns a dentry reference
that is either identical to its second argument or is an ERR_PTR(-E...);
in both cases no refcount changes happen. Inconvenient for users and
bug-prone; it would be better to have it return 0 on success and -E... on
failure.
2) it allows cross-directory moves; however, no such caller have
ever materialized and considering the way debugfs is used, it's unlikely
to happen in the future. What's more, any such caller would have fun
issues to deal with wrt interplay with recursive removal. It also makes
the calling conventions clumsier...
3) tautological rename fails; the callers have no race-free way
to deal with that.
4) new name must have been formed by the caller; quite a few
callers have it done by sprintf/kasprintf/etc., ending up with considerable
boilerplate.
Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers
convert to that easily, and it's simpler internally.
IMO debugfs_rename() should go; if we ever get a real-world use case for
cross-directory moves in debugfs, we can always look into the right way
to handle that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for configuring Emergency Preparedness Communication
Services (EPCS) for station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
And move it to a separate function so it could later be reused for
dynamic addition of links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.1e9c1873796a.I27a51c8c1d455f0a6d5b59f93f2c9ac49282febb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the wiphy_guard changes, rdev_start_radar_detection's return value
in nl80211_start_radar_detection is ignored and we always returned 0.
Fixes: f42d22d3f7 ("wifi: cfg80211: define and use wiphy guard")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://patch.msgid.link/20250109161040.325742-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The kernel performs several regulatory checks for AP mode in
nl80211/cfg80211. These checks include radar detection,
verification of whether the sub-channel is disabled, and
an examination to determine if the channel is a DFS channel
(both DFS usable and DFS available). These checks are
performed across a frequency range, examining each sub-channel.
However, these checks are also performed on subchannels that
have been punctured which should not be examined as they are
not in use.
This leads to the issue where the AP stops because one of
the 20 MHz sub-channels is disabled or radar detected on
the channel, even when the sub-channel is punctured.
To address this issue, add a condition check wherever
regulatory checks exist for AP mode in nl80211/cfg80211.
This check identifies punctured channels and, upon finding
them, skips the regulatory checks for those channels.
Co-developed-by: Manaswini Paluri <quic_mpaluri@quicinc.com>
Signed-off-by: Manaswini Paluri <quic_mpaluri@quicinc.com>
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250109050409.25351-1-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check that additionally extended MLD capa/ops for the MLD is
consistent, i.e. the same value is reported by all affiliated
APs/links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.e29f42c7ae21.Ib2cdce608321ad154e4b13103cc315c3e3cb6b2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There really shouldn't be duplicate entries when we give
the list to the driver, and since we already have a list
it's easy to avoid.
While at it, remove the unnecessary allocation there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.b0012c70f503.Id6fcad979434c1437340aa283abae2906345cca1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Draft P802.11be_D7.0 clause 35.3.4.2, if a multi-link
request requests an MLD with which an AP corresponding to the
nontransmitted BSSID, the corresponding multi-link probe response
shall carry a basic multi-mink element of that MLD in the frame body
of the multi-link probe response, whose location is outside of the
Multiple BSSID element carried in the frame.
Therefore additional handing is needed for parsing multi-link probe
response and generating the merged elements so that the MLD in the frame
body can be correctly copied to the generated elements. Otherwise, the
nontransmitted BSS looks like non-MLD.
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241225073725.847062-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-4-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
-----BEGIN PGP SIGNATURE-----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=qo16
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A small set of fixes:
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: sme: init n_channels before channels[] access
wifi: mac80211: fix station NSS capability initialization order
wifi: mac80211: fix vif addr when switching from monitor to station
wifi: mac80211: fix a queue stall in certain cases of CSA
wifi: mac80211: wake the queues in case of failure in resume
wifi: cfg80211: clear link ID from bitmap during link delete after clean up
wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================
Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the __counted_by annocation in cfg80211_scan_request struct,
the "n_channels" struct member must be set before accessing the
"channels" array. Failing to do so will trigger a runtime warning
when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://patch.msgid.link/20241203152049.348806-1-lihaoyu499@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies.
Fixes: 45d43937a4 ("wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsing")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241115063835.5888-1-zichenxie0106@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during link deletion, the link ID is first removed from the
valid_links bitmap before performing any clean-up operations. However, some
functions require the link ID to remain in the valid_links bitmap. One
such example is cfg80211_cac_event(). The flow is -
nl80211_remove_link()
cfg80211_remove_link()
ieee80211_del_intf_link()
ieee80211_vif_set_links()
ieee80211_vif_update_links()
ieee80211_link_stop()
cfg80211_cac_event()
cfg80211_cac_event() requires link ID to be present but it is cleared
already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit.
Therefore, clear the link ID from the bitmap only after completing the link
clean-up.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241121-mlo_dfs_fix-v2-1-92c3bf7ab551@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All error handling paths go to "out", except this one. Before the
commit in Fixes, error in the previous code would also end to "out",
freeing the memory.
Move the code up to avoid the leak.
Fixes: 62262dd00c ("wifi: cfg80211: disallow SMPS in AP mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/eae54ce066d541914f272b10cab7b263c08eced3.1729956868.git.christophe.jaillet@wanadoo.fr
[move code, update commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channels array in the cfg80211_scan_request has a __counted_by
attribute attached to it, which points to the n_channels variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of allocated memory as the initial value for
n_channels. It is updated with the actual number of added elements after
the array is filled.
Fixes: aa4ec06c45 ("wifi: cfg80211: use __counted_by where appropriate")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241029-nl80211_parse_sched_scan-bounds-checker-fix-v2-1-c804b787341f@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when the driver attempts to connect to an AP MLD with multiple
APs, the cfg80211_mlme_check_mlo_compat() function requires the Medium
Synchronization Delay values from different APs of the same AP MLD to be
equal, which may result in connection failures.
This is because when the driver receives a multi-link probe response from
an AP MLD with multiple APs, cfg80211 updates the Elements for each AP
based on the multi-link probe response. If the Medium Synchronization Delay
is set in the multi-link probe response, the Elements for each AP belonging
to the same AP MLD will have the Medium Synchronization Delay set
simultaneously. If non-multi-link probe responses are received from
different APs of the same MLD AP, cfg80211 will still update the Elements
based on the non-multi-link probe response. Since the non-multi-link probe
response does not set the Medium Synchronization Delay
(IEEE 802.11be-2024-35.3.4.4), if the Elements from a non-multi-link probe
response overwrite those from a multi-link probe response that has set the
Medium Synchronization Delay, the Medium Synchronization Delay values for
APs belonging to the same AP MLD will not be equal. This discrepancy causes
the cfg80211_mlme_check_mlo_compat() function to fail, leading to
connection failures. Commit ccb964b4ab
("wifi: cfg80211: validate MLO connections better") did not take this into
account.
To address this issue, remove this validity check.
Fixes: ccb964b4ab ("wifi: cfg80211: validate MLO connections better")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://patch.msgid.link/20241031134223.970-1-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Currently there's one conflict in
Documentation/networking/net_cachelines/net_device.rst. To fix that
just remove the iw_public_data line:
https://lore.kernel.org/all/20241011121014.674661a0@canb.auug.org.au/
And when net is merged to net-next there will be another simple
conflict in in net/mac80211/cfg.c:
https://lore.kernel.org/all/20241024115523.4cd35dde@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcbz9YRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsabQf8CWJ/kyonw/Z8hRxgfE/7D6Jiqoq7R+ML
8W8lbc6F5wra4eCBq/oo6UVV36Ss6mxQYcRcmLq+nCkXa4qdMpg/z55QECMHxx5Z
YnIBbD2vBrIj7W21gfCKH1WJ+b5IQFZl3zuxuCgXjxD9TJM2CjUfOkvrhrqqzrPn
clfUx5f01vfv2jdvClPR5977gFE5One/ANeRQNs7uDS0TeeD2P+61DEB1//htIJo
7GwwCyUJCeOcfWRMzQwhpoppWKcPAV70kSVJrl/fRstS68vQGSQbcx9yiNeWkSFw
JXjQGdc8eYLPzLqECwS0KwFkta6AXbafAYYXe1wdlAzr+kmJ9x5oqA==
=x+mr
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcWl7MRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv0Qgf/fQJKXkGJkvozrbJATkKHfHKUOphIl4Y8
/r3SlrsIL6qXZAUq5N+NH9vfUeKt5kkKG8Fc8yrJaygDLsV9v1LGiBSsb5eJ+PfM
4fCOdzPSrWG984dLwsCK8UGEzfQ1G4d6HckwubUMimK2X/m6wx/99fenjMAQvdWO
rjAJmpAkgoT0Fvf8GD3joMBKKjMFr2KT8tgbfvwpyr9cXAPZYf35+74Nl84UjHiP
rGTGN++NQuPMsYyYIPPA+eMNUnlUVyDah+UVmzsMp27YUdKBKjx23kRH6tKM/46H
dWqpqEV50xshlPaotHoFg9+4KRrxnxwvFtGTsnbvHcuSnkPBUusAvw==
=l6SI
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
