Introduce the sb_count variable which tracks the number of
beacon intervals until the next long beacon. To initialise this
value, we find the current short beacon index into this period
which represents the number of short beacons left to send before
the next long beacon. We use the same TSF value used to initialise
the DTIM count to ensure the short beacon count and DTIM count
are in sync as its common for the long beacon period and DTIM period
to be equivalent.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-4-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On 32-bit systems, the size of an unsigned long is 4 bytes,
while a u64 is 8 bytes. Therefore, when using
or_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE),
the code is incorrectly searching for a bit in a 32-bit
variable that is expected to be 64 bits in size,
leading to incorrect bit finding.
Solution: Ensure that the size of the bits variable is correctly
adjusted for each architecture.
Call Trace:
? show_regs+0x54/0x58
? __warn+0x6b/0xd4
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? report_bug+0x113/0x150
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x44
? exc_invalid_op+0x18/0x50
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? exc_overflow+0x30/0x30
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? ieee80211_mesh_work+0xff/0x260 [mac80211]
? cfg80211_wiphy_work+0x72/0x98 [cfg80211]
? process_one_work+0xf1/0x1fc
? worker_thread+0x2c0/0x3b4
? kthread+0xc7/0xf0
? mod_delayed_work_on+0x4c/0x4c
? kthread_complete_and_exit+0x14/0x14
? ret_from_fork+0x24/0x38
? kthread_complete_and_exit+0x14/0x14
? ret_from_fork_asm+0xf/0x14
? entry_INT80_32+0xf0/0xf0
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20241125162920.2711462-1-ih@simonwunderlich.de
[restore no-op path for no changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Public action extended channel switch announcement (ECSA)
frames cannot be protected well, the spec is unclear about
what should happen in the presence of stations that can
receive protected dual and stations that cannot.
Mitigate these issues by not treating public action frames
as the absolute truth, only treat them as a hint to stop
transmitting (quiet mode), and do the remainder of the CSA
handling only when receiving the next beacon (or protected
action frame) that contains the CSA; or, if it doesn't,
simply stop being quiet and continue operating normally.
This limits the exposure to malicious ECSA public action
frames, since they cannot cause a disconnect now, only a
short interruption in traffic.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143037.ec7ccc45903e.Ife17d55c7ecbf98060f9c52889f3c8ba48798970@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With a ath9k device I can see that:
iw phy phy0 interface add mesh0 type mp
ip link set mesh0 up
iw dev mesh0 scan
Will start a scan with the Power Management bit set in the Frame Control Field.
This is because we set this bit depending on the nonpeer_pm variable of the mesh
iface sdata and when there are no active links on the interface it remains to
NL80211_MESH_POWER_UNKNOWN.
As soon as links starts to be established, it wil switch to
NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta
nonpeer_pm field.
As we want no power save by default, (as expressed with the per sta ini values),
lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.
Also please note that we cannot change the default value from userspace prior to
establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before
NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Depending on the origin of the packets (and their SA), 802.11 + mesh headers
could be filled in differently. In order to properly deal with that, add a
new field to the lookup key, indicating the type (local, proxied or
forwarded). This can fix spurious packet drop issues that depend on the order
in which nodes/hosts communicate with each other.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240415121811.13391-1-nbd@nbd.name
[use sizeof_field() for key_len]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Whenever sta_flush() function is invoked, all STAs present in that
interface are flushed. In case of MLO, it is desirable to only flush such
STAs that are at least using a given link id as one of their links.
Add support for this by making change in the __sta_info_flush API argument
to accept a link ID. And then, only if the STA is using the given link as
one of its links, it would be flushed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-3-quic_adisi@quicinc.com
[reword commit message, in particular this isn't about "active" links]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If intending to associate with a lower bandwidth, remove capabilities
related to 320 MHz from the EHT capabilities element. Also change the
EHT MCS-NSS set accordingly: if just reducing 320->160 or similar the
format doesn't change, just cut off the last bytes. If changing from
higher bandwidth to 20 MHz only EHT STA, adjust the format.
Note that this also requires adjusting the caller in mlme.c since the
data written can now be shorter than it determined. We need to clean
all that up. Since the other callers pass NULL for the conn limit, we
don't need to change things there.
Link: https://msgid.link/20240129202041.b5f6df108c77.I0d8ea04079c61cb3744cc88625eeaf0d4776dc2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the code we currently check for support 80+80, 160
and 320 channel widths, but really the way this should
be (and is otherwise) handled is that we compute the
highest channel bandwidth given there, and then cut it
down to what we support. This is also needed for wider
bandwidth OFDMA support.
Change the code to remove this limitation and always
parse the highest possible channel width.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.d06f85082e29.I47e68ed3d97b0a2f4ee61e5d8abfcefc8a5b9c08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rewrite the station-side connection handling. The connection
flags (IEEE80211_DISABLE_*) are rather confusing, and they're
not always maintained well. Additionally, for wider-bandwidth
OFDMA support we need to know the precise bandwidth of the AP,
which is currently somewhat difficult.
Rewrite this to have a 'mode' (S1G/legacy/HT/...) and a limit
on the bandwidth. This is not entirely clean because some of
those modes aren't completely sequenced (as this assumes in
some places), e.g. VHT doesn't exist on 2.4 GHz, but HE does.
However, it still simplifies things and gives us a good idea
what we're operating as, so we can parse elements accordingly
etc.
This leaves a FIXME for puncturing, this is addressed in a
later patch.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.9451722c0110.I3e61f4cfe9da89008e1854160093c76a1e69dc2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes: 15ddba5f43 ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need this later to convert other works that might
be cancelled from here, so convert this one first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Similar to AP beacon, this enables the basic mesh EHT mode, including
EHT operation IE and the fixed field of EHT operation information IE.
As for the optional part (i.e. preamble puncturing bitmap) will be
added in future patch.
Tested-by: Lian Chen <lian.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/1e0ddb9001312451c3e99c4eed2072caf8075f61.1679935259.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previously, fast xmit only worked on interface types where initially a
sta lookup is performed, and a cached header can be attached to the sta,
requiring only some fields to be updated at runtime.
This technique is not directly applicable for a mesh device type due
to the dynamic nature of the topology and protocol. There are more
addresses that need to be filled, and there is an extra header with a
dynamic length based on the addressing mode.
Change the code to cache entries contain a copy of the mesh subframe header +
bridge tunnel header, as well as an embedded struct ieee80211_fast_tx, which
contains the information for building the 802.11 header.
Add a mesh specific early fast xmit call, which looks up a cached entry and
adds only the mesh subframe header, before passing it over to the generic
fast xmit code.
To ensure the changes in network are reflected in these cached headers,
flush affected cached entries on path changes, as well as other conditions
that currently trigger a fast xmit check in other modes (key changes etc.)
This code is loosely based on a previous implementation by:
Sriram R <quic_srirrama@quicinc.com>
Cc: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the sequence number is shared across different tx queues, it needs
to be atomic in order to avoid accidental duplicate assignment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we add 6 GHz capability in MLO, we cannot use the SMPS
mode from the deflink. Pass it separately instead since on
a second link we don't even have a link data struct yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing a frame containing a multi-BSSID element, we
need to know both the transmitted and non-transmitted BSSID
so we can parse it correctly.
Unfortunately, in quite a number of cases, we got this wrong
and were passing the wrong BSSID or useless information:
* the mgmt->bssid from a frame is only the transmitted
BSSID if the frame is a beacon
* passing just one of the parameters as non-NULL isn't
useful and ignored
In those case where we need to parse for a specific BSS we
always have a BSS structure pointer, representing the BSS
we need, whether transmitted or not. Thus, pass that pointer
to the parsing function instead of the two BSSIDs.
Also fix two bugs:
* we need to re-parse all the elements for the other BSS
when iterating the non-transmitted BSSes in scan
* we need to parse for the correct BSS when setting up
the channel data in client code
Fixes: 78ac51f815 ("mac80211: support multi-bssid")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Separate out the connection downgrade flags from the ifmgd->flags
and put them into the link information instead. While at it, make
them a separate sparse type so we don't get confused about where
they belong and have static checking on correct handling.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since links can be added and removed dynamically, we need to
somehow protect the sdata->link[] and vif->link_conf[] array
pointers from disappearing when accessing them without locks.
RCU-ify the pointers to achieve this, which requires quite a
bit of rework.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previous memory allocations in this function already use GFP_KERNEL, so
use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit
GFP_ATOMIC.
This gives more opportunities of successful allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we're limiting bandwidth for some reason such as regulatory
restrictions, then advertise that limitation just like we do
for VHT today, so the AP is aware we cannot use the higher BW
it might be using.
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As the 802.11 spec evolves, we need to parse more and more
elements. This is causing the struct to grow, and we can no
longer get away with putting it on the stack.
Change the API to always dynamically allocate and return an
allocated pointer that must be kfree()d later.
As an alternative, I contemplated a scheme whereby we'd say
in the code which elements we needed, e.g.
DECLARE_ELEMENT_PARSER(elems,
SUPPORTED_CHANNELS,
CHANNEL_SWITCH,
EXT(KEY_DELIVERY));
ieee802_11_parse_elems(..., &elems, ...);
and while I think this is possible and will save us a lot
since most individual places only care about a small subset
of the elements, it ended up being a bit more work since a
lot of places do the parsing and then pass the struct to
other functions, sometimes with multiple levels.
Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently pass the entire elements to the rx_bcn_presp()
method, but only need mesh_config. Additionally, we use the
length of the elements to calculate back the entire frame's
length, but that's confusing - just pass the length of the
frame instead.
Link: https://lore.kernel.org/r/20210920154009.a18ed3d2da6c.I1824b773a0fbae4453e1433c184678ca14e8df45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently he_support is set only for AP mode. Storing this
information for mesh BSS as well helps driver to determine
HE support. Also save HE operation element params in BSS
conf so that drivers can access this for any configurations
instead of having to parse the beacon to fetch that info.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Link: https://lore.kernel.org/r/20201020183111.25458-2-pradeepc@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to reuse the functions and structs for other counters such as BSS
color change. Rename them to more generic names.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
