Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's annoying for the list_add to be outside net_devmem_bind_dmabuf, but
the list_del is in net_devmem_unbind_dmabuf. Make it consistent by
having both the list_add/del be inside the net_devmem_[un]bind_dmabuf.
Cc: ap420073@gmail.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes: 1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should not enable netmem TX for drivers that don't declare support.
Check for driver netmem TX support during devmem TX binding and fail if
the driver does not have the functionality.
Check for driver support in validate_xmit_skb as well.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-9-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The combined condition was left as is when we converted
from __dev_get_by_index() to netdev_get_by_index_lock().
There was no need to undo anything with the former, for
the latter we need an unlock.
Fixes: 1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250418015317.1954107-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki reports that the assert for netdev lock fires when
there are netdev event listeners (otherwise we skip the netlink
event generation).
Correct the locking when coming from the notifier.
The NETDEV_XDP_FEAT_CHANGE notifier is already fully locked,
it's the documentation that's incorrect.
Fixes: 99e44f39a8 ("netdev: depend on netdev->lock for xdp features")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/20250410171019.62128-1-kuniyu@amazon.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250416030447.1077551-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.
For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Writes to XDP features are now protected by netdev->lock.
Other things we report are based on ops which don't change
once device has been registered. It is safe to stop taking
rtnl_lock, and depend on netdev->lock instead.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdev queue dump accesses: NAPI, memory providers, XSk pointers.
All three are "ops protected" now, switch to the op compat locking.
rtnl lock does not have to be taken for "ops locked" devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the netdev_nl_sock_priv_destroy(), an instance lock is acquired
before calling net_devmem_unbind_dmabuf(), then releasing an instance
lock(netdev_unlock(binding->dev)).
However, a binding is freed in the net_devmem_unbind_dmabuf().
So using a binding after net_devmem_unbind_dmabuf() occurs UAF.
To fix this UAF, it needs to use temporary variable.
Fixes: ba6f418fbf ("net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250328062237.3746875-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers which opt into instance lock protection of ops should
only call set_real_num_*_queues() under the instance lock.
This means that queue counts are double protected (writes
are under both rtnl_lock and instance lock, readers under
either).
Some readers may still be under the rtnl_lock, however, so for
now we need double protection of writers.
OTOH queue API paths are only under the protection of the instance
lock, so we need to validate that the instance is actually locking
ops, otherwise the input checks we do against queue count are racy.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit added taking the netdev instance lock
in netdev_nl_bind_rx_doit(), but didn't remove it in
net_devmem_unbind_dmabuf() which it calls from an error path.
Always expect the callers of net_devmem_unbind_dmabuf() to
hold the lock. This is consistent with net_devmem_bind_dmabuf().
(Not so) coincidentally this also protects mp_param with the instance
lock, which the rest of this series needs.
Fixes: 1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6597e8d358 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefano Jordhani <sjordhani@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk> # for iouring
Link: https://patch.msgid.link/20250214181801.931-1-sjordhani@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13c7c941e7 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are at least two cases where napi_id may not present and the
napi_id should be elided:
1. Queues could be created, but napi_enable may not have been called
yet. In this case, there may be a NAPI but it may not have an ID and
output of a napi_id should be elided.
2. TX-only NAPIs currently do not have NAPI IDs. If a TX queue happens
to be linked with a TX-only NAPI, elide the NAPI ID from the netlink
output as a NAPI ID of 0 is not useful for users.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205193751.297211-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mandatory callback that prints information about the memory
provider to netlink.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-7-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NAPI lifetime, visibility and config are all fully under
netdev_lock protection now.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prep for dropping rtnl_lock, start locking netdev->lock in netlink
genl ops. We need to be using netdev->up instead of flags & IFF_UP.
We can remove the RCU lock protection for the NAPI since NAPI list
is protected by netdev->lock already.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dump continuation depends on the NAPI list being sorted.
Broken netlink dump continuation may be rare and hard to debug
so add a warning if we notice the potential problem while walking
the list.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250110004505.3210140-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0f ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down we "hide" the NAPI instances.
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241219032833.1165433-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a per-NAPI IRQ suspension parameter, which can be get/set with
netdev-genl.
This patch doesn't change any behavior but prepares the code for other
changes in the following commits which use irq_suspend_timeout as a
timeout for IRQ suspension.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows a more uniform implementation of non-dump and dump
operations, and will be used later in the series to avoid some
per-operation allocation.
Additionally rename the NL_ASSERT_DUMP_CTX_FITS macro, to
fit a more extended usage.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/1130cc2896626b84587a2a5f96a5c6829638f4da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
