mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
4053 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Luis Gerhorst
|
6b84d7895d |
bpf: Return -EFAULT on internal errors
This prevents us from trying to recover from these on speculative paths in the future. Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de> Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Henriette Herzog <henriette.herzog@rub.de> Cc: Maximilian Ott <ott@cs.fau.de> Cc: Milan Stephan <milan.stephan@fau.de> Link: https://lore.kernel.org/r/20250603205800.334980-4-luis.gerhorst@fau.de Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Luis Gerhorst
|
fd508bde5d |
bpf: Return -EFAULT on misconfigurations
Mark these cases as non-recoverable to later prevent them from being caught when they occur during speculative path verification. Eduard writes [1]: The only pace I'm aware of that might act upon specific error code from verifier syscall is libbpf. Looking through libbpf code, it seems that this change does not interfere with libbpf. [1] https://lore.kernel.org/all/785b4531ce3b44a84059a4feb4ba458c68fce719.camel@gmail.com/ Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de> Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Henriette Herzog <henriette.herzog@rub.de> Cc: Maximilian Ott <ott@cs.fau.de> Cc: Milan Stephan <milan.stephan@fau.de> Link: https://lore.kernel.org/r/20250603205800.334980-3-luis.gerhorst@fau.de Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Luis Gerhorst
|
8b7df50fd4 |
bpf: Move insn if/else into do_check_insn()
This is required to catch the errors later and fall back to a nospec if on a speculative path. Eliminate the regs variable as it is only used once and insn_idx is not modified in-between the definition and usage. Do not pass insn but compute it in the function itself. As Eduard points out [1], insn is assumed to correspond to env->insn_idx in many places (e.g, __check_reg_arg()). Move code into do_check_insn(), replace * "continue" with "return 0" after modifying insn_idx * "goto process_bpf_exit" with "return PROCESS_BPF_EXIT" * "goto process_bpf_exit_full" with "return process_bpf_exit_full()" * "do_print_state = " with "*do_print_state = " [1] https://lore.kernel.org/all/293dbe3950a782b8eb3b87b71d7a967e120191fd.camel@gmail.com/ Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Henriette Herzog <henriette.herzog@rub.de> Cc: Maximilian Ott <ott@cs.fau.de> Cc: Milan Stephan <milan.stephan@fau.de> Link: https://lore.kernel.org/r/20250603205800.334980-2-luis.gerhorst@fau.de Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tao Chen
|
2bc0575fec |
bpf: Add cookie in fdinfo for raw_tp
Add cookie in fdinfo for raw_tp, the info as follows: link_type: raw_tracepoint link_id: 31 prog_tag: 9dfdf8ef453843bf prog_id: 32 tp_name: sys_enter cookie: 23925373020405760 Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606165818.3394397-5-chen.dylane@linux.dev |
||
|
Tao Chen
|
380cb6dfa2 |
bpf: Add cookie in fdinfo for tracing
Add cookie in fdinfo for tracing, the info as follows: link_type: tracing link_id: 6 prog_tag: 9dfdf8ef453843bf prog_id: 35 attach_type: 25 target_obj_id: 1 target_btf_id: 60355 cookie: 9007199254740992 Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606165818.3394397-4-chen.dylane@linux.dev |
||
|
Tao Chen
|
c7beb48344 |
bpf: Add cookie to tracing bpf_link_info
bpf_tramp_link includes cookie info, we can add it in bpf_link_info. Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606165818.3394397-1-chen.dylane@linux.dev |
||
|
Ihor Solodrai
|
5534e58f2e |
bpf: Make reg_not_null() true for CONST_PTR_TO_MAP
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the verifier explores the branches under rX == 0 in check_cond_jmp_op() even if reg->type is CONST_PTR_TO_MAP, because it was not checked for in reg_not_null(). Fix this by adding CONST_PTR_TO_MAP to the set of types that are considered non nullable in reg_not_null(). An old "unpriv: cmp map pointer with zero" selftest fails with this change, because now early out correctly triggers in check_cond_jmp_op(), making the verification to pass. In practice verifier may allow pointer to null comparison in unpriv, since in many cases the relevant branch and comparison op are removed as dead code. So change the expected test result to __success_unpriv. Signed-off-by: Ihor Solodrai <isolodrai@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com |
||
|
Tao Chen
|
97ebac5886 |
bpf: Add show_fdinfo for perf_event
After commit
|
||
|
Yonghong Song
|
1209339844 |
bpf: Implement mprog API on top of existing cgroup progs
Current cgroup prog ordering is appending at attachment time. This is not ideal. In some cases, users want specific ordering at a particular cgroup level. To address this, the existing mprog API seems an ideal solution with supporting BPF_F_BEFORE and BPF_F_AFTER flags. But there are a few obstacles to directly use kernel mprog interface. Currently cgroup bpf progs already support prog attach/detach/replace and link-based attach/detach/replace. For example, in struct bpf_prog_array_item, the cgroup_storage field needs to be together with bpf prog. But the mprog API struct bpf_mprog_fp only has bpf_prog as the member, which makes it difficult to use kernel mprog interface. In another case, the current cgroup prog detach tries to use the same flag as in attach. This is different from mprog kernel interface which uses flags passed from user space. So to avoid modifying existing behavior, I made the following changes to support mprog API for cgroup progs: - The support is for prog list at cgroup level. Cross-level prog list (a.k.a. effective prog list) is not supported. - Previously, BPF_F_PREORDER is supported only for prog attach, now BPF_F_PREORDER is also supported by link-based attach. - For attach, BPF_F_BEFORE/BPF_F_AFTER/BPF_F_ID/BPF_F_LINK is supported similar to kernel mprog but with different implementation. - For detach and replace, use the existing implementation. - For attach, detach and replace, the revision for a particular prog list, associated with a particular attach type, will be updated by increasing count by 1. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606163141.2428937-1-yonghong.song@linux.dev |
||
|
Luis Gerhorst
|
97744b4971 |
bpf: Clarify sanitize_check_bounds()
As is, it appears as if pointer arithmetic is allowed for everything
except PTR_TO_{STACK,MAP_VALUE} if one only looks at
sanitize_check_bounds(). However, this is misleading as the function
only works together with retrieve_ptr_limit() and the two must be kept
in sync. This patch documents the interdependency and adds a check to
ensure they stay in sync.
adjust_ptr_min_max_vals(): Because the preceding switch returns -EACCES
for every opcode except for ADD/SUB, the sanitize_needed() following the
sanitize_check_bounds() call is always true if reached. This means,
unless sanitize_check_bounds() detected that the pointer goes OOB
because of the ADD/SUB and returns -EACCES, sanitize_ptr_alu() always
executes after sanitize_check_bounds().
The following shows that this also implies that retrieve_ptr_limit()
runs in all relevant cases.
Note that there are two calls to sanitize_ptr_alu(), these are simply
needed to easily calculate the correct alu_limit as explained in
commit 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"). The truncation-simulation is already performed on the first
call.
In the second sanitize_ptr_alu(commit_window = true), we always run
retrieve_ptr_limit(), unless:
* can_skip_alu_sanititation() is true, notably `BPF_SRC(insn->code) ==
BPF_K`. BPF_K is fine because it means that there is no scalar
register (which could be subject to speculative scalar confusion due
to Spectre v4) that goes into the ALU operation. The pointer register
can not be subject to v4-based value confusion due to the nospec
added. Thus, in this case it would have been fine to also skip
sanitize_check_bounds().
* If we are on a speculative path (`vstate->speculative`) and in the
second "commit" phase, sanitize_ptr_alu() always just returns 0. This
makes sense because there are no ALU sanitization limits to be learned
from speculative paths. Furthermore, because the sanitization will
ensure that pointer arithmetic stays in (architectural) bounds, the
sanitize_check_bounds() on the speculative path could also be skipped.
The second case needs more attention: Assume we have some ALU operation
that is used with scalars architecturally, but with a
non-PTR_TO_{STACK,MAP_VALUE} pointer (e.g., PTR_TO_PACKET)
speculatively. It might appear as if this would allow an unsanitized
pointer ALU operations, but this can not happen because one of the
following two always holds:
* The type mismatch stems from Spectre v4, then it is prevented by a
nospec after the possibly-bypassed store involving the pointer. There
is no speculative path simulated for this case thus it never happens.
* The type mismatch stems from a Spectre v1 gadget like the following:
r1 = slow(0)
r4 = fast(0)
r3 = SCALAR // Spectre v4 scalar confusion
if (r1) {
r2 = PTR_TO_PACKET
} else {
r2 = 42
}
if (r4) {
r2 += r3
*r2
}
If `r2 = PTR_TO_PACKET` is indeed dead code, it will be sanitized to
`goto -1` (as is the case for the r4-if block). If it is not (e.g., if
`r1 = r4 = 1` is possible), it will also be explored on an
architectural path and retrieve_ptr_limit() will reject it.
To summarize, the exception for `vstate->speculative` is safe.
Back to retrieve_ptr_limit(): It only allows the ALU operation if the
involved pointer register (can be either source or destination for ADD)
is PTR_TO_STACK or PTR_TO_MAP_VALUE. Otherwise, it returns -EOPNOTSUPP.
Therefore, sanitize_check_bounds() returning 0 for
non-PTR_TO_{STACK,MAP_VALUE} is fine because retrieve_ptr_limit() also
runs for all relevant cases and prevents unsafe operations.
To summarize, we allow unsanitized pointer arithmetic with 64-bit
ADD/SUB for the following instructions if the requirements from
retrieve_ptr_limit() AND sanitize_check_bounds() hold:
* ptr -=/+= imm32 (i.e. `BPF_SRC(insn->code) == BPF_K`)
* PTR_TO_{STACK,MAP_VALUE} -= scalar
* PTR_TO_{STACK,MAP_VALUE} += scalar
* scalar += PTR_TO_{STACK,MAP_VALUE}
To document the interdependency between sanitize_check_bounds() and
retrieve_ptr_limit(), add a verifier_bug_if() to make sure they stay in
sync.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/CAP01T76HZ+s5h+_REqRFkRjjoKwnZZn9YswpSVinGicah1pGJw@mail.gmail.com/
Link: https://lore.kernel.org/bpf/CAP01T75oU0zfZCiymEcH3r-GQ5A6GOc6GmYzJEnMa3=53XuUQQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20250603204557.332447-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Tao Chen
|
2fe1c59347 |
bpf: Add cookie to raw_tp bpf_link_info
After commit
|
||
|
Linus Torvalds
|
00c010e130 |
- The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox
simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - The 3 patch series "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - The 2 patch series "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - The 8 patch series "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - The 2 patch series "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - The 12 patch series "Always call constructor for kernel page tables" from Kevin Brodsky "ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables". This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - The 9 patch series "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - The 3 patch series "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - The 6 patch series "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - The 3 patch series ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - The 2 patch series "vmscan: enforce mems_effective during demotion" from Gregory Price "changes reclaim to respect cpuset.mems_effective during demotion when possible". because "presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated." "This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently." - The 2 patch series ""Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - The 4 patch series "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - The 2 patch series "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - The 4 patch series "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - The 6 patch series "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - The 4 patch series "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - The 6 patch series "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is "yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents." - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - The 4 patch series "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x Qqb/UGMEpilyre1PayQqOnct3aSL9Ao= =tYYm -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
|
Linus Torvalds
|
90b83efa67 |
bpf-next-6.16
-----BEGIN PGP SIGNATURE-----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=j3t8
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
||
|
Linus Torvalds
|
1b98f357da |
Networking changes for 6.16.
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Linus Torvalds
|
3b66e6b3c0 |
cgroup: Changes for v6.16
- cgroup rstat shared the tracking tree across all controlers with the rationale being that a cgroup which is using one resource is likely to be using other resources at the same time (ie. if something is allocating memory, it's probably consuming CPU cycles). However, this turned out to not scale very well especially with memcg using rstat for internal operations which made memcg stat read and flush patterns substantially different from other controllers. JP Kobryn split the rstat tree per controller. - cgroup BPF support was hooking into cgroup init/exit paths directly. Convert them to use a notifier chain instead so that other usages can be added easily. The two of the patches which implement this are mislabeled as belonging to sched_ext instead of cgroup. Sorry. - Relatively minor cpuset updates. - Documentation updates. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYUmA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGRhbAP90v8QwUkWEKGQSam8JY3by7PvrW6pV5ot+BGuM 4xu3BAEAjsJ9FdiwYLwKYqG7y59xhhBFOo6GpcP52kPp3znl+QQ= =6MIT -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - cgroup rstat shared the tracking tree across all controllers with the rationale being that a cgroup which is using one resource is likely to be using other resources at the same time (ie. if something is allocating memory, it's probably consuming CPU cycles). However, this turned out to not scale very well especially with memcg using rstat for internal operations which made memcg stat read and flush patterns substantially different from other controllers. JP Kobryn split the rstat tree per controller. - cgroup BPF support was hooking into cgroup init/exit paths directly. Convert them to use a notifier chain instead so that other usages can be added easily. The two of the patches which implement this are mislabeled as belonging to sched_ext instead of cgroup. Sorry. - Relatively minor cpuset updates - Documentation updates * tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier sched_ext: Introduce cgroup_lifetime_notifier cgroup: Minor reorganization of cgroup_create() cgroup, docs: cpu controller's interaction with various scheduling policies cgroup, docs: convert space indentation to tab indentation cgroup: avoid per-cpu allocation of size zero rstat cpu locks cgroup, docs: be specific about bandwidth control of rt processes cgroup: document the rstat per-cpu initialization cgroup: helper for checking rstat participation of css cgroup: use subsystem-specific rstat locks to avoid contention cgroup: use separate rstat trees for each subsystem cgroup: compare css to cgroup::self in helper for distingushing css cgroup: warn on rstat usage by early init subsystems cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask() cgroup/rstat: Improve cgroup_rstat_push_children() documentation cgroup: fix goto ordering in cgroup_init() cgroup: fix pointer check in css_rstat_init() cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs cgroup/cpuset: Fix obsolete comment in cpuset_css_offline() cgroup/cpuset: Always use cpu_active_mask ... |
||
|
Yonghong Song
|
5ffb537e41 |
selftests/bpf: Add tests with stack ptr register in conditional jmp
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
|
||
|
Yonghong Song
|
e2d2115e56 |
bpf: Do not include stack ptr register in precision backtracking bookkeeping
Yi Lai reported an issue ([1]) where the following warning appears
in kernel dmesg:
[ 60.643604] verifier backtracking bug
[ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10
[ 60.648428] Modules linked in: bpf_testmod(OE)
[ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full)
[ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10
[ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04
01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ...
[ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246
[ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000
[ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff
[ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a
[ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8
[ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001
[ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000
[ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0
[ 60.691623] Call Trace:
[ 60.692821] <TASK>
[ 60.693960] ? __pfx_verbose+0x10/0x10
[ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10
[ 60.697495] check_cond_jmp_op+0x16f7/0x39b0
[ 60.699237] do_check+0x58fa/0xab10
...
Further analysis shows the warning is at line 4302 as below:
4294 /* static subprog call instruction, which
4295 * means that we are exiting current subprog,
4296 * so only r1-r5 could be still requested as
4297 * precise, r0 and r6-r10 or any stack slot in
4298 * the current frame should be zero by now
4299 */
4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) {
4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt));
4302 WARN_ONCE(1, "verifier backtracking bug");
4303 return -EFAULT;
4304 }
With the below test (also in the next patch):
__used __naked static void __bpf_jmp_r10(void)
{
asm volatile (
"r2 = 2314885393468386424 ll;"
"goto +0;"
"if r2 <= r10 goto +3;"
"if r1 >= -1835016 goto +0;"
"if r2 <= 8 goto +0;"
"if r3 <= 0 goto +0;"
"exit;"
::: __clobber_all);
}
SEC("?raw_tp")
__naked void bpf_jmp_r10(void)
{
asm volatile (
"r3 = 0 ll;"
"call __bpf_jmp_r10;"
"r0 = 0;"
"exit;"
::: __clobber_all);
}
The following is the verifier failure log:
0: (18) r3 = 0x0 ; R3_w=0
2: (85) call pc+2
caller:
R10=fp0
callee:
frame1: R1=ctx() R3_w=0 R10=fp0
5: frame1: R1=ctx() R3_w=0 R10=fp0
; asm volatile (" \ @ verifier_precision.c:184
5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78
7: (05) goto pc+0
8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0
9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx()
10: (b5) if r2 <= 0x8 goto pc+0
mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1
mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0
mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3
mark_precise: frame1: regs=r2,r10 stack= before 7: (05) goto pc+0
mark_precise: frame1: regs=r2,r10 stack= before 5: (18) r2 = 0x20202000256c6c78
mark_precise: frame1: regs=r10 stack= before 2: (85) call pc+2
BUG regs 400
The main failure reason is due to r10 in precision backtracking bookkeeping.
Actually r10 is always precise and there is no need to add it for the precision
backtracking bookkeeping.
One way to fix the issue is to prevent bt_set_reg() if any src/dst reg is
r10. Andrii suggested to go with push_insn_history() approach to avoid
explicitly checking r10 in backtrack_insn().
This patch added push_insn_history() support for cond_jmp like 'rX <op> rY'
operations. In check_cond_jmp_op(), if any of rX or rY is a stack pointer,
push_insn_history() will record such information, and later backtrack_insn()
will do bt_set_reg() properly for those register(s).
[1] https://lore.kernel.org/bpf/Z%2F8q3xzpU59CIYQE@ly-workstation/
Reported by: Yi Lai <yi1.lai@linux.intel.com>
Fixes:
|
||
|
Hou Tao
|
d496557826 |
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf program. When BPF JIT is disabled or under 32-bit host, bpf_map_lookup_percpu_elem() will not be inlined. Using it in a sleepable bpf program will trigger the warning in bpf_map_lookup_percpu_elem(), because the bpf program only holds rcu_read_lock_trace lock. Therefore, add the missed check. Reported-by: syzbot+dce5aae19ae4d6399986@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/000000000000176a130617420310@google.com/ Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20250526062534.1105938-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
86bc9c7424 |
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com
Fixes:
|
||
|
Yonghong Song
|
f95695f2c4 |
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
Marc Suñé (Isovalent, part of Cisco) reported an issue where an
uninitialized variable caused generating bpf prog binary code not
working as expected. The reproducer is in [1] where the flags
“-Wall -Werror” are enabled, but there is no warning as the compiler
takes advantage of uninitialized variable to do aggressive optimization.
The optimized code looks like below:
; {
0: bf 16 00 00 00 00 00 00 r6 = r1
; bpf_printk("Start");
1: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll
0000000000000008: R_BPF_64_64 .rodata
3: b4 02 00 00 06 00 00 00 w2 = 0x6
4: 85 00 00 00 06 00 00 00 call 0x6
; DEFINE_FUNC_CTX_POINTER(data)
5: 61 61 4c 00 00 00 00 00 w1 = *(u32 *)(r6 + 0x4c)
; bpf_printk("pre ipv6_hdrlen_offset");
6: 18 01 00 00 06 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x6 ll
0000000000000030: R_BPF_64_64 .rodata
8: b4 02 00 00 17 00 00 00 w2 = 0x17
9: 85 00 00 00 06 00 00 00 call 0x6
<END>
The verifier will report the following failure:
9: (85) call bpf_trace_printk#6
last insn is not an exit or jmp
The above verifier log does not give a clear hint about how to fix
the problem and user may take quite some time to figure out that
the issue is due to compiler taking advantage of uninitialized variable.
In llvm internals, uninitialized variable usage may generate
'unreachable' IR insn and these 'unreachable' IR insns may indicate
uninitialized variable impact on code optimization. So far, llvm
BPF backend ignores 'unreachable' IR hence the above code is generated.
With clang21 patch [2], those 'unreachable' IR insn are converted
to func __bpf_trap(). In order to maintain proper control flow
graph for bpf progs, [2] also adds an 'exit' insn after bpf_trap()
if __bpf_trap() is the last insn in the function. The new code looks like:
; {
0: bf 16 00 00 00 00 00 00 r6 = r1
; bpf_printk("Start");
1: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll
0000000000000008: R_BPF_64_64 .rodata
3: b4 02 00 00 06 00 00 00 w2 = 0x6
4: 85 00 00 00 06 00 00 00 call 0x6
; DEFINE_FUNC_CTX_POINTER(data)
5: 61 61 4c 00 00 00 00 00 w1 = *(u32 *)(r6 + 0x4c)
; bpf_printk("pre ipv6_hdrlen_offset");
6: 18 01 00 00 06 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x6 ll
0000000000000030: R_BPF_64_64 .rodata
8: b4 02 00 00 17 00 00 00 w2 = 0x17
9: 85 00 00 00 06 00 00 00 call 0x6
10: 85 10 00 00 ff ff ff ff call -0x1
0000000000000050: R_BPF_64_32 __bpf_trap
11: 95 00 00 00 00 00 00 00 exit
<END>
In kernel, a new kfunc __bpf_trap() is added. During insn
verification, any hit with __bpf_trap() will result in
verification failure. The kernel is able to provide better
log message for debugging.
With llvm patch [2] and without this patch (no __bpf_trap()
kfunc for existing kernel), e.g., for old kernels, the verifier
outputs
10: <invalid kfunc call>
kfunc '__bpf_trap' is referenced but wasn't resolved
Basically, kernel does not support __bpf_trap() kfunc.
This still didn't give clear signals about possible reason.
With llvm patch [2] and with this patch, the verifier outputs
10: (85) call __bpf_trap#74479
unexpected __bpf_trap() due to uninitialized variable?
It gives much better hints for verification failure.
[1] https://github.com/msune/clang_bpf/blob/main/Makefile#L3
[2] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205326.1291640-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Yonghong Song
|
d848bba680 |
bpf: Remove special_kfunc_set from verifier
Currently, the verifier has both special_kfunc_set and special_kfunc_list. When adding a new kfunc usage to the verifier, it is often confusing about whether special_kfunc_set or special_kfunc_list or both should add that kfunc. For example, some kfuncs, e.g., bpf_dynptr_from_skb, bpf_dynptr_clone, bpf_wq_set_callback_impl, does not need to be in special_kfunc_set. To avoid potential future confusion, special_kfunc_set is deleted and btf_id_set_contains(&special_kfunc_set, ...) is removed. The code is refactored with a new func check_special_kfunc(), which contains all codes covered by original branch meta.btf == btf_vmlinux && btf_id_set_contains(&special_kfunc_set, meta.func_id) There is no functionality change. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250523205321.1291431-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
T.J. Mercier
|
6eab7ac7c5 |
bpf: Add open coded dmabuf iterator
This open coded iterator allows for more flexibility when creating BPF programs. It can support output in formats other than text. With an open coded iterator, a single BPF program can traverse multiple kernel data structures (now including dmabufs), allowing for more efficient analysis of kernel data compared to multiple reads from procfs, sysfs, or multiple traditional BPF iterator invocations. Signed-off-by: T.J. Mercier <tjmercier@google.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20250522230429.941193-4-tjmercier@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
T.J. Mercier
|
76ea955349 |
bpf: Add dmabuf iterator
The dmabuf iterator traverses the list of all DMA buffers. DMA buffers are refcounted through their associated struct file. A reference is taken on each buffer as the list is iterated to ensure each buffer persists for the duration of the bpf program execution without holding the list mutex. Signed-off-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20250522230429.941193-3-tjmercier@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
6d5b940e1e |
vfs-6.16-rc1.async.dir
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBN6wAKCRCRxhvAZXjc ok32AQD9DTiSCAoVg+7s+gSBuLTi8drPTN++mCaxdTqRh5WpRAD9GVyrGQT0s6LH eo9bm8d1TAYjilEWM0c0K0TxyQ7KcAA= =IW7H -----END PGP SIGNATURE----- Merge tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs directory lookup updates from Christian Brauner: "This contains cleanups for the lookup_one*() family of helpers. We expose a set of functions with names containing "lookup_one_len" and others without the "_len". This difference has nothing to do with "len". It's rater a historical accident that can be confusing. The functions without "_len" take a "mnt_idmap" pointer. This is found in the "vfsmount" and that is an important question when choosing which to use: do you have a vfsmount, or are you "inside" the filesystem. A related question is "is permission checking relevant here?". nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len functions. They pass nop_mnt_idmap and refuse to work on filesystems which have any other idmap. This work changes nfsd and cachefile to use the lookup_one family of functions and to explictily pass &nop_mnt_idmap which is consistent with all other vfs interfaces used where &nop_mnt_idmap is explicitly passed. The remaining uses of the "_one" functions do not require permission checks so these are renamed to be "_noperm" and the permission checking is removed. This series also changes these lookup function to take a qstr instead of separate name and len. In many cases this simplifies the call" * tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: VFS: change lookup_one_common and lookup_noperm_common to take a qstr Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS VFS: rename lookup_one_len family to lookup_noperm and remove permission check cachefiles: Use lookup_one() rather than lookup_one_len() nfsd: Use lookup_one() rather than lookup_one_len() VFS: improve interface for lookup_one functions |
||
|
Lorenz Bauer
|
a539e2a6d5 |
btf: Allow mmap of vmlinux btf
User space needs access to kernel BTF for many modern features of BPF. Right now each process needs to read the BTF blob either in pieces or as a whole. Allow mmaping the sysfs file so that processes can directly access the memory allocated for it in the kernel. remap_pfn_range is used instead of vm_insert_page due to aarch64 compatibility issues. Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-1-e8c941acc414@isovalent.com |
||
|
Alexei Starovoitov
|
2aad4edf6e |
mm: rename try_alloc_pages() to alloc_pages_nolock()
The "try_" prefix is confusing, since it made people believe that try_alloc_pages() is analogous to spin_trylock() and NULL return means EAGAIN. This is not the case. If it returns NULL there is no reason to call it again. It will most likely return NULL again. Hence rename it to alloc_pages_nolock() to make it symmetrical to free_pages_nolock() and document that NULL means ENOMEM. Link: https://lkml.kernel.org/r/20250517003446.60260-1-alexei.starovoitov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Harry Yoo <harry.yoo@oracle.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Tejun Heo
|
82648b8b2a |
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
Replace explicit cgroup_bpf_inherit/offline() calls from cgroup creation/destruction paths with notification callback registered on cgroup_lifetime_notifier. Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Paul Chaignon
|
1cb0f56d96 |
bpf: WARN_ONCE on verifier bugs
Throughout the verifier's logic, there are multiple checks for inconsistent states that should never happen and would indicate a verifier bug. These bugs are typically logged in the verifier logs and sometimes preceded by a WARN_ONCE. This patch reworks these checks to consistently emit a verifier log AND a warning when CONFIG_DEBUG_KERNEL is enabled. The consistent use of WARN_ONCE should help fuzzers (ex. syzkaller) expose any situation where they are actually able to reach one of those buggy verifier states. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Link: https://lore.kernel.org/r/aCs1nYvNNMq8dAWP@mail.gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Ilya Leoshkevich
|
94bde253d3 |
bpf: Pass the same orig_call value to trampoline functions
There is currently some confusion in the s390x JIT regarding whether
orig_call can be NULL and what that means. Originally the NULL value
was used to distinguish the struct_ops case, but this was superseded by
BPF_TRAMP_F_INDIRECT (see commit
|
||
|
Kumar Kartikeya Dwivedi
|
bc049387b4 |
bpf: Add support for __prog argument suffix to pass in prog->aux
Instead of hardcoding the list of kfuncs that need prog->aux passed to them with a combination of fixup_kfunc_call adjustment + __ign suffix, combine both in __prog suffix, which ignores the argument passed in, and fixes it up to the prog->aux. This allows kfuncs to have the prog->aux passed into them without having to touch the verifier. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20250513142812.1021591-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Mykyta Yatsenko
|
a498ee7576 |
bpf: Implement dynptr copy kfuncs
This patch introduces a new set of kfuncs for working with dynptrs in
BPF programs, enabling reading variable-length user or kernel data
into dynptr directly. To enable memory-safety, verifier allows only
constant-sized reads via existing bpf_probe_read_{user|kernel} etc.
kfuncs, dynptr-based kfuncs allow dynamically-sized reads without memory
safety shortcomings.
The following kfuncs are introduced:
* `bpf_probe_read_kernel_dynptr()`: probes kernel-space data into a dynptr
* `bpf_probe_read_user_dynptr()`: probes user-space data into a dynptr
* `bpf_probe_read_kernel_str_dynptr()`: probes kernel-space string into
a dynptr
* `bpf_probe_read_user_str_dynptr()`: probes user-space string into a
dynptr
* `bpf_copy_from_user_dynptr()`: sleepable, copies user-space data into
a dynptr for the current task
* `bpf_copy_from_user_str_dynptr()`: sleepable, copies user-space string
into a dynptr for the current task
* `bpf_copy_from_user_task_dynptr()`: sleepable, copies user-space data
of the task into a dynptr
* `bpf_copy_from_user_task_str_dynptr()`: sleepable, copies user-space
string of the task into a dynptr
The implementation is built on two generic functions:
* __bpf_dynptr_copy
* __bpf_dynptr_copy_str
These functions take function pointers as arguments, enabling the
copying of data from various sources, including both kernel and user
space.
Use __always_inline for generic functions and callbacks to make sure the
compiler doesn't generate indirect calls into callbacks, which is more
expensive, especially on some kernel configurations. Inlining allows
compiler to put direct calls into all the specific callback implementations
(copy_user_data_sleepable, copy_user_data_nofault, and so on).
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250512205348.191079-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Mykyta Yatsenko
|
d060b6aab0 |
helpers: make few bpf helpers public
Make bpf_dynptr_slice_rdwr, bpf_dynptr_check_off_len and __bpf_dynptr_write available outside of the helpers.c by adding their prototypes into linux/include/bpf.h. bpf_dynptr_check_off_len() implementation is moved to header and made inline explicitly, as small function should typically be inlined. These functions are going to be used from bpf_trace.c in the next patch of this series. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Link: https://lore.kernel.org/r/20250512205348.191079-2-mykyta.yatsenko5@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
8231533340 |
bpf: Add support to retrieve ref_ctr_offset for uprobe perf link
Adding support to retrieve ref_ctr_offset for uprobe perf link, which got somehow omitted from the initial uprobe link info changes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org |
||
|
Feng Yang
|
ee971630f2 |
bpf: Allow some trace helpers for all prog types
if it works under NMI and doesn't use any context-dependent things, should be fine for any program type. The detailed discussion is in [1]. [1] https://lore.kernel.org/all/CAEf4Bza6gK3dsrTosk6k3oZgtHesNDSrDd8sdeQ-GiS6oJixQg@mail.gmail.com/ Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Feng Yang <yangfeng@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/bpf/20250506061434.94277-2-yangfeng59949@163.com |
||
|
Peilin Ye
|
fce7bd8e38 |
bpf/verifier: Handle BPF_LOAD_ACQ instructions in insn_def_regno()
In preparation for supporting BPF load-acquire and store-release instructions for architectures where bpf_jit_needs_zext() returns true (e.g. riscv64), make insn_def_regno() handle load-acquires properly. Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23 Signed-off-by: Peilin Ye <yepeilin@google.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/09cb2aec979aaed9d16db41f0f5b364de39377c0.1746588351.git.yepeilin@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Martin KaFai Lau
|
fb5b480205 |
bpf: Add bpf_list_{front,back} kfunc
In the kernel fq qdisc implementation, it only needs to look at
the fields of the first node in a list but does not always
need to remove it from the list. It is more convenient to have
a peek kfunc for the list. It works similar to the bpf_rbtree_first().
This patch adds bpf_list_{front,back} kfunc. The verifier is changed
such that the kfunc returning "struct bpf_list_node *" will be
marked as non-owning. The exception is the KF_ACQUIRE kfunc. The
net effect is only the new bpf_list_{front,back} kfuncs will
have its return pointer marked as non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Martin KaFai Lau
|
3fab84f00d |
bpf: Simplify reg0 marking for the list kfuncs that return a bpf_list_node pointer
The next patch will add bpf_list_{front,back} kfuncs to peek the head
and tail of a list. Both of them will return a 'struct bpf_list_node *'.
Follow the earlier change for rbtree, this patch checks the
return btf type is a 'struct bpf_list_node' pointer instead
of checking each kfuncs individually to decide if
mark_reg_graph_node should be called. This will make
the bpf_list_{front,back} kfunc addition easier in
the later patch.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Martin KaFai Lau
|
2ddef1783c |
bpf: Allow refcounted bpf_rb_node used in bpf_rbtree_{remove,left,right}
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Martin KaFai Lau
|
9e3e66c553 |
bpf: Add bpf_rbtree_{root,left,right} kfunc
In a bpf fq implementation that is much closer to the kernel fq, it will need to traverse the rbtree: https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/ The much simplified logic that uses the bpf_rbtree_{root,left,right} to traverse the rbtree is like: struct fq_flow { struct bpf_rb_node fq_node; struct bpf_rb_node rate_node; struct bpf_refcount refcount; unsigned long sk_long; }; struct fq_flow_root { struct bpf_spin_lock lock; struct bpf_rb_root root __contains(fq_flow, fq_node); }; struct fq_flow *fq_classify(...) { struct bpf_rb_node *tofree[FQ_GC_MAX]; struct fq_flow_root *root; struct fq_flow *gc_f, *f; struct bpf_rb_node *p; int i, fcnt = 0; /* ... */ f = NULL; bpf_spin_lock(&root->lock); p = bpf_rbtree_root(&root->root); while (can_loop) { if (!p) break; gc_f = bpf_rb_entry(p, struct fq_flow, fq_node); if (gc_f->sk_long == sk_long) { f = bpf_refcount_acquire(gc_f); break; } /* To be removed from the rbtree */ if (fcnt < FQ_GC_MAX && fq_gc_candidate(gc_f, jiffies_now)) tofree[fcnt++] = p; if (gc_f->sk_long > sk_long) p = bpf_rbtree_left(&root->root, p); else p = bpf_rbtree_right(&root->root, p); } /* remove from the rbtree */ for (i = 0; i < fcnt; i++) { p = tofree[i]; tofree[i] = bpf_rbtree_remove(&root->root, p); } bpf_spin_unlock(&root->lock); /* bpf_obj_drop the fq_flow(s) that have just been removed * from the rbtree. */ for (i = 0; i < fcnt; i++) { p = tofree[i]; if (p) { gc_f = bpf_rb_entry(p, struct fq_flow, fq_node); bpf_obj_drop(gc_f); } } return f; } The above simplified code needs to traverse the rbtree for two purposes, 1) find the flow with the desired sk_long value 2) while searching for the sk_long, collect flows that are the fq_gc_candidate. They will be removed from the rbtree. This patch adds the bpf_rbtree_{root,left,right} kfunc to enable the rbtree traversal. The returned bpf_rb_node pointer will be a non-owning reference which is the same as the returned pointer of the exisiting bpf_rbtree_first kfunc. Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20250506015857.817950-4-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Martin KaFai Lau
|
7faccdf4b4 |
bpf: Simplify reg0 marking for the rbtree kfuncs that return a bpf_rb_node pointer
The current rbtree kfunc, bpf_rbtree_{first, remove}, returns the
bpf_rb_node pointer. The check_kfunc_call currently checks the
kfunc btf_id instead of its return pointer type to decide
if it needs to do mark_reg_graph_node(reg0) and ref_set_non_owning(reg0).
The later patch will add bpf_rbtree_{root,left,right} that will also
return a bpf_rb_node pointer. Instead of adding more kfunc btf_id
checks to the "if" case, this patch changes the test to check the
kfunc's return type. is_rbtree_node_type() function is added to
test if a pointer type is a bpf_rb_node. The callers have already
skipped the modifiers of the pointer type.
A note on the ref_set_non_owning(), although bpf_rbtree_remove()
also returns a bpf_rb_node pointer, the bpf_rbtree_remove()
has the KF_ACQUIRE flag. Thus, its reg0 will not become non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Martin KaFai Lau
|
b183c0123d |
bpf: Check KF_bpf_rbtree_add_impl for the "case KF_ARG_PTR_TO_RB_NODE"
In a later patch, two new kfuncs will take the bpf_rb_node pointer arg.
struct bpf_rb_node *bpf_rbtree_left(struct bpf_rb_root *root,
struct bpf_rb_node *node);
struct bpf_rb_node *bpf_rbtree_right(struct bpf_rb_root *root,
struct bpf_rb_node *node);
In the check_kfunc_call, there is a "case KF_ARG_PTR_TO_RB_NODE"
to check if the reg->type should be an allocated pointer or should be
a non_owning_ref.
The later patch will need to ensure that the bpf_rb_node pointer passing
to the new bpf_rbtree_{left,right} must be a non_owning_ref. This
should be the same requirement as the existing bpf_rbtree_remove.
This patch swaps the current "if else" statement. Instead of checking
the bpf_rbtree_remove, it checks the bpf_rbtree_add. Then the new
bpf_rbtree_{left,right} will fall into the "else" case to make
the later patch simpler. bpf_rbtree_add should be the only
one that needs an allocated pointer.
This should be a no-op change considering there are only two kfunc(s)
taking bpf_rb_node pointer arg, rbtree_add and rbtree_remove.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Thorsten Blum
|
41948afcf5 |
bpf: Replace offsetof() with struct_size()
Compared to offsetof(), struct_size() provides additional compile-time checks for structs with flexible arrays (e.g., __must_be_array()). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250503151513.343931-2-thorsten.blum@linux.dev |
||
|
Jakub Kicinski
|
337079d31f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lorenzo Bianconi
|
714070c4cb |
bpf: Allow XDP dev-bound programs to perform XDP_REDIRECT into maps
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes:
|
||
|
Thorsten Blum
|
7b05f43155 |
bpf: Replace offsetof() with struct_size()
Compared to offsetof(), struct_size() provides additional compile-time checks for structs with flexible arrays (e.g., __must_be_array()). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250428210638.30219-2-thorsten.blum@linux.dev |
||
|
Alexei Starovoitov
|
224ee86639 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc4
Cross-merge bpf and other fixes after downstream PRs. No conflicts. Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Alexei Starovoitov
|
f88886de09 |
bpf: Add namespace to BPF internal symbols
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes:
|
||
|
Brandon Kammerdiener
|
75673fda0c |
bpf: fix possible endless loop in BPF map iteration
The _safe variant used here gets the next element before running the callback, avoiding the endless loop condition. Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com> Link: https://lore.kernel.org/r/20250424153246.141677-2-brandon.kammerdiener@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com> |
||
|
KaFai Wan
|
1271a40eea |
bpf: Allow access to const void pointer arguments in tracing programs
Adding support to access arguments with const void pointer arguments
in tracing programs.
Currently we allow tracing programs to access void pointers. If we try to
access argument which is pointer to const void like 2nd argument in kfree,
verifier will fail to load the program with;
0: R1=ctx() R10=fp0
; asm volatile ("r2 = *(u64 *)(r1 + 8); ");
0: (79) r2 = *(u64 *)(r1 +8)
func 'kfree' arg1 type UNKNOWN is not a struct
Changing the is_int_ptr to void and generic integer check and renaming
it to is_void_or_int_ptr.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-2-mannkafai@gmail.com
|
||
|
Shung-Hsi Yu
|
53ebef53a6 |
bpf: Use proper type to calculate bpf_raw_tp_null_args.mask index
The calculation of the index used to access the mask field in 'struct bpf_raw_tp_null_args' is done with 'int' type, which could overflow when the tracepoint being attached has more than 8 arguments. While none of the tracepoints mentioned in raw_tp_null_args[] currently have more than 8 arguments, there do exist tracepoints that had more than 8 arguments (e.g. iocost_iocg_forgive_debt), so use the correct type for calculation and avoid Smatch static checker warning. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20250418074946.35569-1-shung-hsi.yu@suse.com Closes: https://lore.kernel.org/r/843a3b94-d53d-42db-93d4-be10a4090146@stanley.mountain/ |