Since the configuration order between the individual MSTOP and CLKON
bits cannot be preserved with the power domain abstraction, drop the
power domain IDs. The corresponding code has also been removed.
Currently, there are no device tree users for these IDs.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20250527112403.1254122-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RTC and VBATTB don't share the MSTOP control bit (but only the bus
clock and the reset signal). As the MSTOP control is modeled though power
domains add power domain ID for the RTC device available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241019084738.3370489-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
