Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075447.3221784-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These lines were indented one tab more than they should be. Delete
the stray tabs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/2033b9fa-7b0f-4617-b94e-7b0a51c5c4b1@sabinyo.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
In stm32_spi_prepare_rx_dma_mdma_chaining() both rx_dma_desc
and rx_mdma_desc are passed as pointer-to-pointer arguments.
The goal is to pass back to the caller the value returned
by dmaengine_prep_slave_sg(), when it is not NULL.
However, these variables are wrongly handled as simple pointers
during later assignments and checks.
Fix this behaviour by introducing two pointer variables
which can then be treated accordingly.
Fixes: d17dd2f1d8 ("spi: stm32: use STM32 DMA with STM32 MDMA to enhance DDR use")
Addresses-Coverity-ID: 1644715 ("Null pointer dereferences (REVERSE_INULL)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Reviewed-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250630081253.17294-1-antonio@mandelbit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a test to check whether the sram_pool is NULL before freeing it.
Fixes: d17dd2f1d8 ("spi: stm32: use STM32 DMA with STM32 MDMA to enhance DDR use")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250630-spi-fix-v2-1-4680939e2a3e@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The `st,spi-midi-ns` property, which was used to set a nanosecond delay
between transferred words, is now deprecated.
This functionality is now supported by the SPI framework through the
`spi_transfer` struct's `word_delay` variable.
Therefore, the private `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of the generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-5-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32 DMA doesn't have the ability to generate convenient burst
transfer on the DDR, ensuring the best load of the AXI & DDR.
To avoid this bad load of the AXI & DDR, STM32 MDMA can be used to transfer
data to the DDR, being triggered by STM32 DMA channel transfer
completion.
An SRAM buffer is used between DMA and MDMA. So the MDMA always does
MEM_TO_MEM transfers (from/to SRAM to/from DDR), and the DMA uses SRAM
instead of DDR with DEV_TO_MEM transfers.
SPI RX DMA (DEV_TO_MEM) becomes:
SPI RX FIFO ==DMA==> SRAM ==MDMA==> DDR
In RX (DEV_TO_MEM), EOT interrupt is used to pause the DMA channel (which
will raise a transfer complete) to trigger the MDMA to flush the SRAM (when
transfer length is not aligned on SRAM period).
TX remains on the former implementation.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-4-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/
Fixes: fee681646f ("spi: stm32: disable device mode with st,stm32f4-spi compatible")
Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi ready functionality is supported by our peripheral in host and
target modes on STM32MP2x SoCs.
Update our spi controller driver to allow devices to use this
functionality.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-1-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32MP25 SOC has capability to behave in device mode however
missing .has_device_mode within its stm32mp25_spi_cfg structure leads
to not being able to enable the device mode.
Fixes: f6cd66231a ("spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20241010-spi-mp25-device-fix-v2-1-d13920de473d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/spi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
The change for the spi-npcm-fiu stands out in the diffstat because the
inconsistent formatting style of the platform_driver initializer is
fixed to match the other struct initializer in the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240925113501.25208-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.
Fixes: c64e7efe46 ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
On stm32mp157 enabling the controller before asserting CS makes the
hardware trigger spurious interrupts in a tight loop and the transfers
fail. Revert the commit that swapped the order of enable and CS. This
reintroduces the problem that swapping was supposed to fix, which
however is less grave.
Reported-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/all/39033ed7-3e57-4339-80b4-fc8919e26aa7@pengutronix.de/
Fixes: 52b62e7a5d ("spi: stm32: enable controller before asserting CS")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240523103326.792907-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
On the STM32F4/7, the MOSI and CLK pins float while the controller is
disabled. CS is a regular GPIO, and therefore always driven. Currently,
the controller is enabled in the transfer_one() callback, which runs
after CS is asserted. Therefore, there is a period where the SPI pins
are floating while CS is asserted, making it possible for stray signals
to disrupt communications. An analogous problem occurs at the end of the
transfer when the controller is disabled before CS is released.
This problem can be reliably observed by enabling the pull-up (if
CPOL=0) or pull-down (if CPOL=1) on the clock pin. This will cause two
extra unintended clock edges per transfer, when the controller is
enabled and disabled.
Note that this bug is likely not present on the STM32H7, because this
driver sets the AFCNTR bit (not supported on F4/F7), which keeps the SPI
pins driven even while the controller is disabled.
Enabling/disabling the controller as part of runtime PM was suggested as
an alternative approach, but this breaks the driver on the STM32MP1 (see
[1]). The following quote from the manual may explain this:
> To restart the internal state machine properly, SPI is strongly
> suggested to be disabled and re-enabled before next transaction starts
> despite its setting is not changed.
This patch has been tested on an STM32F746 with a MAX14830 UART
expander.
[1] https://lore.kernel.org/lkml/ZXzRi_h2AMqEhMVw@dell-precision-5540/T/
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20240424135237.1329001-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since splitting transfers was moved to spi_optimize_message() in the
core SPI code, we now need to use the optimize_message callback in the
STM32 SPI driver to ensure that the operation is only performed once
when spi_optimize_message() is used by peripheral drivers explicitly.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240219-mainline-spi-precook-message-v2-3-4a762c6701b9@baylibre.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The __spi_split_transfer_maxsize() function has a gpf argument to allow
callers to specify the type of memory allocation that needs to be used.
However, this function only allocates struct spi_transfer and is not
intended to be used from atomic contexts so this type should always be
GFP_KERNEL, so we can just drop the argument.
Some callers of these functions also passed GFP_DMA, but since only
struct spi_transfer is allocated and not any tx/rx buffers, this is
not actually necessary and is removed in this commit.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240206200648.1782234-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the STM32MP25:
- Burst should not be enabled with the new DMA used on STM32MP25.
- STM32MP25 SPI8 has a limited feature set, it can only send words of
8 or 16 bits and with a maximum words number of 1024.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://msgid.link/r/20231218155721.359198-4-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32F7 SPI peripheral is similar to the STM32F4, except it allows
arbitrary word lengths between 4 and 16 bits, and has a small 32-bit
FIFO that allows two 8-bit or smaller words to be transferred with a
single 16-bit read/write.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231102193722.3042245-5-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32F4 and STM32F7 SPI peripherals are very similar, therefore
most of the driver can be shared between the two. In preparation for
adding support for the F7, change all functions and defines to use a
generic stm32fx prefix, except for code and registers that differ
between the two devices.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231102193722.3042245-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203352.2698326-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6KQACgkQJNaLcl1U
h9BHMQf+Jtvdx8cIhzVyMRBUfmeEzpi5oGiurPiQVBM5RsO0APULbxdy1kBsQ4FO
5Omv7juG323XiZc1hrtBPNoZfnn83pjjMFZZZYse8Ntd6e5iesHzxRQJaml8NPBA
0ktJQiB6Eh9WTjYT6LgN8T5j4SLT5F2jiDinBPUj1vHGSy0YXGWpYFq9QIkXwMbE
8n0jyf5+Neccs4CIiPR3ap8NjIyPE/b761acRFkOmF+iiHWmnFrQYNS4CSxR2kOC
yL0SlzuoG2feYSfiHyCKIPC0MGT5/Vn1tzNqoEam6B6Ecql24W8BMdU0/No3yKPT
22LIfRWR9Wb5usFxjDxIs9YaWD4abA==
=oj/i
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
Commit 6f486556ab ("spi: stm32: renaming of spi_master into
spi_controller") included an accidential reverted of a change added in
commit 1e49291125 ("spi: stm32: split large transfers based on word
size instead of bytes").
This breaks large SPI transfers with word sizes > 8 bits, which are
e.g. common when driving MIPI DBI displays.
Fix this by using `spi_split_transfers_maxwords()` instead of
`spi_split_transfers_maxsize()`.
Fixes: 6f486556ab ("spi: stm32: renaming of spi_master into spi_controller")
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20230816145237.3159817-1-l.goehrs@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727110558.2904084-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Various cleanups and refactorings of the SPI header and core parts
united in a single series. It also touches drivers under SPI subsystem
folder on the pure renaming purposes of some constants.
No functional change intended.
Convert the users from SPI_MASTER_MUST_TX and/or SPI_MASTER_MUST_RX
to SPI_CONTROLLER_MUST_TX and/or SPI_CONTROLLER_MUST_RX respectively
and kill the not used anymore definitions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for stm32h7 to use SPI controller in device role.
In such case, the spi instance should have the spi-slave property
defined.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-5-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid usage of deprecated dmaengine_terminate_all and use
dmaengine_terminate_sync and dmaengine_terminate_async instead.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-3-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Preparing introduction of SPI device, rename the spi_master structure
into spi_controller. This doesn't have any functional impact since
spi_master was already a macro for spi_controller.
Referring now to ctrl instead of master since the spi_controller
structure might not be used as a master controller only.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-2-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230328061839.82185-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TSIZE register in CR2, to which the number of words to transfer
is written, is only 16 Bit. This limits transfers to 65535 SPI
_words_ at a time. The existing code uses spi_split_transfers_maxsize
to limit transfers to 65535 _bytes_ at a time.
This breaks large transfers with bits_per_word > 8, as they are
split inside of a word boundary by the odd size limit.
Split transfers based on the number of words instead.
This has the added benefit of not artificially limiting the maximum
length of bpw > 8 transfers to half or a quarter of the actual limit.
The combination of very large transfers and bits_per_word = 16 is triggered
e.g. by MIPI DBI displays when updating large parts of the screen.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20230310092053.1006459-2-l.goehrs@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230303172041.2103336-74-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original fix "spi: stm32: Rate-limit the 'Communication suspended' message"
still leads to "stm32h7_spi_irq_thread: 1696 callbacks suppressed" spew in the
kernel log. Since this 'Communication suspended' message is a debug print, add
RATELIMIT_MSG_ON_RELEASE flag to inhibit the "callbacks suspended" part during
normal operation and only print summary at the end.
Fixes: ea8be08cc9 ("spi: stm32: Rate-limit the 'Communication suspended' message")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221018183513.206706-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420090452.2588930-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
STM32F4_SPI_SR_RXNE and STM32F4_SPI_SR_OVR are distinct bits in the same
status register. ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE is thus
equal to ~STM32F4_SPI_SR_OVR.
The original intention was likely for transmission-only transfers to
ignore interrupts both for when the Rx queue has bytes (RXNE) as well
as when these bytes haven't been read in time (OVR).
Fix the typo by adding the missing parenthesis.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20220201115142.3999860-1-a.fatoum@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 61367d0b8f ("spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4")
allowed to properly communicate with the st-gyro-spi even when
there is no tx_buf provided by setting the flag SPI_MASTER_MUST_TX and
thus forcing a dummy TX buffer to work in Full Duplex.
This behavior should kept only for the STM32F4 and not for other
compatible since the STM32H7 do support SIMPLEX_RX and SIMPLEX_TX.
Add the flags variable within the struct stm32_spi_cfg so that flags
used at master registration time are compatible specific.
Fixes: 61367d0b8f ("spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20220119093245.624878-3-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variables 'can_dma' and 'has_startbit' are described within the
struct stm32_spi_cfg comment but have never existed in this structure
so remove them.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20220119093245.624878-2-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/spi-stm32.c:915:23-25: WARNING !A || A && B is equivalent to !A || B
Condition !A || A && B is equivalent to !A || B.
Generated by: scripts/coccinelle/misc/excluded_middle.cocci
Fixes: 7ceb0b8a3c ("spi: stm32: finalize message either on dma callback or EOT")
CC: Alain Volmat <alain.volmat@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20210713191004.GA14729@5eb5c2cbef84
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the usage, it is necessary to perform the finalize
message operation either upon receiving the EOT interruption,
eiher upon receiving the DMA callback. Indeed, when relying
on DMA, even if the SPI EOT IT has been received, it is
necessary to wait for the end of the DMA RX transaction before
accessing to the data.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-8-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In nominal cases, disable is called as part of the unprepare_message,
after receiving a EOT and after receiving all data so it doesn't
make sense to check for EOT and empty the FIFO.
Moreover, at the end of the disable, the SPI is disable (SPE) leading
to clear of all internal FIFO, leaving the IP in a known status.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-7-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove flush parameter and check RXWNE or RXPLVL when end of transfer
flag is set.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-6-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
0 byte transfer handling is now done within the core in code added
by commit b306320322 ("spi: Skip zero-length transfers in spi_transfer_one_message()")
This reverts commit 2269f5a8b1 ("spi: stm32: properly handle 0 byte transfer")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-5-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.
This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c
Fixes: 038ac869c9 ("spi: stm32: add runtime PM support")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
