With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'struct pci_error_handlers' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
39049 6429 112 45590 b216 drivers/scsi/aacraid/linit.o
After:
=====
text data bss dec hex filename
39113 6365 112 45590 b216 drivers/scsi/aacraid/linit.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/efdec8425981e10fc398fa2ac599c9c45d930561.1737318548.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr) The
major core change is the renaming of the slave_ methods plus a bit of
constification. The rest are minor updates and fixes.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ5ZQKSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMdAQCyVlDZ
v/3EFCuC4U1l70mMu8t+F4RPvqYxM3QPCi5dDQEA751YN/kaqxeXZDqGUKCAOE3K
Nl4XFTfLEkDVrQFFqPc=
=9sV8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-5-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Setting QUEUE_FLAG_NOMERGES was added in commit d1b01d14b7 ("scsi:
mpt3sas: Set NVMe device queue depth as 128") without any explanation.
Drivers should second guess the block layer merge decisions, so remove
the flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 023ab2a9b4 ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-13-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The mpt3sas_ctl_exit() should be called after communication with the
controller stops but currently it may cause false warnings about not
released memory. Fix this by letting mpt3sas_ctl_exit() handle misc driver
release per driver and release DMA in mpt3sas_ctl_release() per ioc.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231019153706.7967-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpt3sas_scsih.c:_scsih_scan_for_devices_after_reset() allocates and fetches
a MPI2_CONFIG_PAGE_RAID_VOL_0 struct (Mpi2RaidVolPage0_t) and a
MPI2_CONFIG_PAGE_RAID_VOL_1 struct (Mpi2RaidVolPage1_t), but does not
include the terminal flexible array members in the struct size
calculations, fetch those members, or otherwise use those members in any
way.
These dynamic allocations can be replaced with local variables.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-13-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After converting terminal variable arrays into flexible array members, use
the bounds-checking struct_size() helper when possible to avoid open-coded
arithmetic struct size calculations.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-8-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Warnings may be logged during driver removal:
mpt3sas 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT ..,
Fix this by deallocating DMA memory later.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230403184736.6399-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
It helps humans and the compiler if it is made explicit that SCSI host
templates are not modified. Hence this patch series that constifies most
SCSI host templates. Please consider this patch series for the next merge
window.
Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-9-helgaas@kernel.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target); the biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so. Beyond the usual bug fixing and
security class reworks, there aren't a huge number of core changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY0B74yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishW2NAP9CPp2R
7NRmSyxcyVYvtCNUW3WxXh65Gn+KgArmg8XucgEAhUBX1fSjOzpERWEU+UaXitbE
Rb+FbjxSc5YxR+nJ/Qc=
=0Wlp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target). The biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so.
Beyond the usual bug fixing and security class reworks, there aren't a
huge number of core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
scsi: mpi3mr: Remove unnecessary cast
scsi: stex: Properly zero out the passthrough command structure
scsi: mpi3mr: Update driver version to 8.2.0.3.0
scsi: mpi3mr: Fix scheduling while atomic type bug
scsi: mpi3mr: Scan the devices during resume time
scsi: mpi3mr: Free enclosure objects during driver unload
scsi: mpi3mr: Handle 0xF003 Fault Code
scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
scsi: mpi3mr: Support new power management framework
scsi: mpi3mr: Update mpi3 header files
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
scsi: core: Add I/O timeout count for SCSI device
scsi: qedf: Populate sysfs attributes for vport
scsi: pm8001: Replace one-element array with flexible-array member
scsi: 3w-xxxx: Replace one-element array with flexible-array member
scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
...
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With cmd_per_lun value 7, a higher number of cache lines (map_nr) are
needed while allocating sdev->budget_map which is not reasonable and hence
increase the cmd_per_lun value to 128.
Link: https://lore.kernel.org/r/20220825075457.16422-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If SCSI error handling is taking place for timed out I/Os on a drive and
the corresponding drive is removed, then stop escalating to higher level of
reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key.
Link: https://lore.kernel.org/r/20220816080801.13929-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM
structure used by ATTO's devices.
Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.com
Co-developed-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
During system shutdown or reboot, mpt3sas will reset the firmware back to
ready state. However, the driver leaves running a watchdog work item
intended to keep the firmware in operational state. This causes a second,
unneeded reset on shutdown and moves the firmware back to operational
instead of in ready state as intended. And if the mpt3sas_fwfault_debug
module parameter is set, this extra reset also panics the system.
mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the
firmware back to ready state.
Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com
Fixes: fae21608c3 ("scsi: mpt3sas: Transition IOC to Ready state during shutdown")
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It seems to me that mpt3sas driver is using dedicated workqueues and is not
calling schedule{,_delayed}_work{,_on}(). Then, there will be no work to
flush using flush_scheduled_work().
Link: https://lore.kernel.org/r/f3b97c7c-1094-4e46-20d8-4321716d6f3f@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We now cache VPD page 0x89 (ATA Information) so there is no need to request
it from the hardware. Make mpt3sas use the cached page.
Link: https://lore.kernel.org/r/20220302053559.32147-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In mpt3sas_scsih_event_callback(), fix a sparse warning when testing the
event log code value by replacing the use of a pointer to the address
storing the event log code with a log code local variable. Doing so,
le32_to_cpu() is used when the log code value is assigned, avoiding a
sparse warning.
Link: https://lore.kernel.org/r/20220307234854.148145-5-damien.lemoal@opensource.wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):
[ 3479.371167] ==================================================================
[ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531
[ 3479.393524]
[ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436
[ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021
[ 3479.409263] Call Trace:
[ 3479.411743] <TASK>
[ 3479.413875] dump_stack_lvl+0x45/0x59
[ 3479.417582] print_address_description.constprop.0+0x1f/0x120
[ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.429469] kasan_report.cold+0x83/0xdf
[ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas]
[ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas]
[ 3479.465529] ? down_write+0xde/0x150
[ 3479.470746] ? up_write+0x14d/0x460
[ 3479.475840] ? kernfs_find_ns+0x137/0x310
[ 3479.481438] pci_device_remove+0x65/0x110
[ 3479.487013] __device_release_driver+0x316/0x680
[ 3479.493180] driver_detach+0x1ec/0x2d0
[ 3479.498499] bus_remove_driver+0xe7/0x2d0
[ 3479.504081] pci_unregister_driver+0x26/0x250
[ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas]
[ 3479.516144] __x64_sys_delete_module+0x2fd/0x510
[ 3479.522315] ? free_module+0xaa0/0xaa0
[ 3479.527593] ? __cond_resched+0x1c/0x90
[ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70
[ 3479.546161] ? trace_hardirqs_on+0x1c/0x110
[ 3479.551828] do_syscall_64+0x35/0x80
[ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3479.563402] RIP: 0033:0x7f1fc482483b
...
[ 3479.943087] ==================================================================
Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.
Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com
Fixes: 7d310f2410 ("scsi: mpt3sas: Get device objects using sas_address & portID")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While determining the SAS address of a drive, the driver checks whether the
handle number is less than the HBA phy count or not. If the handle number
is less than the HBA phy count then driver assumes that this handle belongs
to HBA and hence it assigns the HBA SAS address.
During IOC firmware downgrade operation, if the number of HBA phys is
reduced and the OS drive's device handle drops below the phy count while
determining the drive's SAS address, the driver ends up using the HBA's SAS
address. This leads to a mismatch of drive's SAS address and hence the
driver unregisters the OS drive and the system goes into read-only mode.
Update the IOC's num_phys to the HBA phy count provided by actual loaded
firmware.
Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com
Fixes: a5e99fda01 ("scsi: mpt3sas: Update hba_port objects after host reset")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are a couple of statements where the indentation is not correct,
clean these up. Remove a redundant break statement.
Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags.
Link: https://lore.kernel.org/r/20210817025014.12085-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-31-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the mpt3sas driver sets the default queue depth based on the
physical interface of the attached device:
- SAS : 254
- SATA: 32
- NVMe: 128
The IOC firmware provides a recommended queue depth for each device through
SAS IO Unit Page1 for SAS/SATA and PCIe IO Unit Page 1 for NVMe devices.
If the host sets the queue depth greater than the firmware recommended
value, then the IOC places the I/Os above the recommended queue depth in an
internal pending queue. This consumes outstanding host-credit/resources,
thereby leading to potential starvation of other devices.
To avoid this, use the device depth recommended by the IOC firmware.
Link: https://lore.kernel.org/r/20210809072639.21228-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X
vectors associated with queues dedicated to polling. The IOC hardware is
single submission queue and multiple reply queue. However, using the shared
host tagset support it is possible to simulate multiple hardware queues.
When poll_queues are enabled through the module parameter, the driver will
allocate extra reply queues without an MSI-X association. All I/O
completion on these queues will be done through the iopoll interface.
Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The IOC firmware assumes that the host driver is still alive after shutdown
and continues to post events to host memory (due to faulty expander phy
links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC
memory access).
Perform an IOC soft reset as part of shutdown to disable event posting.
Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
