The current configuration used for the IPQ5332 M31 USB PHY fails the
Near End High Speed Signal Quality compliance test. To resolve this,
update the initialization sequence as specified in the Hardware Design
Document.
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Cc: stable@kernel.org
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebdb@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drivers should generally be quiet on successful probe, but this is not
followed by some PHY drivers, for example:
snps-eusb2-hsphy 88e1000.phy: Registered Snps-eUSB2 phy
qcom-eusb2-repeater c432000.spmi:pmic@7:phy@fd00: Registered Qcom-eUSB2 repeater
qcom-eusb2-repeater c432000.spmi:pmic@a:phy@fd00: Registered Qcom-eUSB2 repeater
qcom-eusb2-repeater c432000.spmi:pmic@b:phy@fd00: Registered Qcom-eUSB2 repeater
snps-eusb2-hsphy fd3000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy fd9000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy fde000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy 88e0000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy 88e2000.phy: Registered Snps-eUSB2 phy
Drop (or demote to debug level) unnecessary registration info messages
to make boot logs a little less noisy.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250523085112.11287-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:
qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
qcom-m31usb-phy 5b000.phy: Registered M31 USB phy
This means that the regulator specified in the device tree never
gets enabled.
Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240406-phy-qcom-m31-regulator-fix-v2-1-c8e9795bc071@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails.
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following Smatch complaint:
drivers/phy/qualcomm/phy-qcom-m31.c:175 m31usb_phy_init()
warn: variable dereferenced before check 'qphy->vreg' (see line 167)
drivers/phy/qualcomm/phy-qcom-m31.c
166
167 ret = regulator_enable(qphy->vreg);
^^^^^^^^^^
Unchecked dereference
168 if (ret) {
169 dev_err(&phy->dev, "failed to enable regulator, %d\n", ret);
170 return ret;
171 }
172
173 ret = clk_prepare_enable(qphy->clk);
174 if (ret) {
175 if (qphy->vreg)
^^^^^^^^^^
Checked too late
176 regulator_disable(qphy->vreg);
177 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
Since the phy will not get registered if qphy->vreg is NULL,
this check is not needed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-phy/cbd26132-c624-44b7-a073-73222b287338@moroto.mountain/T/#u
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/1694069452-3794-1-git-send-email-quic_varada@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
m31_ipq5332_regs is only used in phy-qcom-m31.c now, change
it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20230824092356.1154839-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails.
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
