- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to: Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar,
Shawn Anastasio, Timothy Pearson, Vishal Parmar
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmiQDOcACgkQpnEsdPSH
ZJRqTBAAkpaZRrbzX6P1fjoTb89esIfY7YSymmXrgMwoF1fgTMzPSjg2Lzwzcjfb
Ednlo8Hy+Ei2SDvctNaqtOcZuidn81AJN41aFIu44S/Mj1cde/cuBMKUTqx+ZBO0
gI4Bd4+V7yEv484PF7ZJga9K1VM85THCLgVWJ00VNHVHyvxgAuFiXdWmh6/qMUyi
thvvLR+ANuAQz3S4VwbBg3AifDl6LXx2s5VB30xYxnPKzFNKZmnGXKwuOJH7rQe2
J8v99n0tcXW1tRGE4pVykzXg4EXL5zgWT9fJ5EZxbeXaW9sqMxi4VjO4jSsrSZ+K
q2v362Dyjgygel9aC2rzN8Q+P5horX2QBR7knJJGa0VtztUiPWKR8za7vGLbzlcm
rUvnTuoY1dwFB72Sy3amALalvWscssL/1sHazvRv65RcciW7/PZNVEiZ0xh1RKqb
J8nWlb+iNBf2z12qLmS5DvUaveaZG1eyndLeD/knsEC49DEOoEy3t7QM1F7KscRR
mYPsEpfjF/D0r+vzb6zl2ykwhJf/t7BNu7MdXH7xbIpj5iwtrhSUfvmx6g2MThzA
Vee2QvQACscdop3W/6xgATH4xoq96v1XxMmCLnZ/HVl2PorxO27ad4EMNO4sBG8c
5agWHT7EnoUgwNF30DRtIHd7jNK/jt8++3kZx6CG9hdSboAM/pM=
=tTms
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
The PCIe hotplug driver calculates the depth of a nested hotplug port by
looking at the is_hotplug_bridge flag. The depth is used as lockdep class
to tell hotplug ports apart.
The is_hotplug_bridge flag encompasses ACPI slots handled by the ACPI
hotplug driver, hence the calculated depth may be too high. Avoid by
checking the is_pciehp flag instead.
This glitch likely has no user-visible impact: ACPI slots typically only
exist at the Root Port level, not in nested hotplug hierarchies. Also,
CONFIG_LOCKDEP is usually only used by developers. So this is just for
the sake of correctness.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/59a097376a2bb493da9efd66fb196ae4b66f8a09.1752390102.git.lukas@wunner.de
The PCIe specification allows three attention indicator states, on, off,
and blink. Enable all three states instead of basic on / off control.
This changes the userspace API (writes to the sysfs "attention" file) to
match the behavior of pciehp. Here's the comparison of previous and new
indicator behavior:
Value Previous New Behavior
----- -------- ------------------------
0 off (reserved, so undefined)
1 on on
2 on blink
3 on off
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: add specifics of behavior change]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1210309411.1359866.1752615582001.JavaMail.zimbra@raptorengineeringinc.com
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/505981576.1359853.1752615415117.JavaMail.zimbra@raptorengineeringinc.com
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by
DPC") sought to ignore Presence Detect Changed events occurring as a side
effect of Downstream Port Containment.
The commit awaits recovery from DPC and then clears events which occurred
in the meantime. However if the first event seen after DPC is Data Link
Layer State Changed, only that event is cleared and not Presence Detect
Changed. The object of the commit is thus defeated.
That's because pciehp_ist() computes the events to clear based on the local
"events" variable instead of "ctrl->pending_events". The former contains
the events that had occurred when pciehp_ist() was entered, whereas the
latter also contains events that have accumulated while awaiting DPC
recovery.
In practice, the order of PDC and DLLSC events is arbitrary and the delay
in-between can be several milliseconds.
So change the logic to always clear PDC events, even if they come after an
initial DLLSC event.
Fixes: c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by DPC")
Reported-by: Lương Việt Hoàng <tcm4095@gmail.com>
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765#c165
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lương Việt Hoàng <tcm4095@gmail.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Link: https://patch.msgid.link/d9c4286a16253af7e93eaf12e076e3ef3546367a.1750257164.git.lukas@wunner.de
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
- Large rework of the protected key crypto code to allow for asynchronous
handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=lFqh
-----END PGP SIGNATURE-----
Merge tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large rework of the protected key crypto code to allow for
asynchronous handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device
driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
* tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (51 commits)
s390/pci: Serialize device addition and removal
s390/pci: Allow re-add of a reserved but not yet removed device
s390/pci: Prevent self deletion in disable_slot()
s390/pci: Remove redundant bus removal and disable from zpci_release_device()
s390/crypto: Extend protected key conversion retry loop
s390/pci: Fix __pcilg_mio_inuser() inline assembly
s390/ptrace: Always inline regs_get_kernel_stack_nth() and regs_get_register()
s390/thread_info: Cleanup header includes
s390/extmem: Add workaround for DCSS unload diag
s390/crypto: Rework protected key AES for true asynch support
s390/cpacf: Rework cpacf_pcc() to return condition code
s390/mm: Fix potential use-after-free in __crst_table_upgrade()
s390/mm: Add mmap_assert_write_locked() check to crst_table_upgrade()
s390/string: Remove strcpy() implementation
s390/con3270: Use strscpy() instead of strcpy()
s390/boot: Use strspcy() instead of strcpy()
s390: Simple strcpy() to strscpy() conversions
s390/pkey/crypto: Introduce xflags param for pkey in-kernel API
s390/pkey: Provide and pass xflags within pkey and zcrypt layers
s390/uv: Remove uv_get_secret_metadata function
...
As disable_slot() takes a struct zpci_dev from the Configured to the
Standby state. In Standby there is still a hotplug slot so this is not
usually a case of sysfs self deletion. This is important because self
deletion gets very hairy in terms of locking (see for example
recover_store() in arch/s390/pci/pci_sysfs.c).
Because the pci_dev_put() is not within the critical section of the
zdev->state_lock however, disable_slot() can turn into a case of self
deletion if zPCI device event handling slips between the mutex_unlock()
and the pci_dev_put(). If the latter is the last put and
zpci_release_device() is called this then tries to remove the hotplug
slot via zpci_exit_slot() which will try to remove the hotplug slot
directory the disable_slot() is part of i.e. self deletion.
Prevent this by widening the zdev->state_lock critical section to
include the pci_dev_put() which is then guaranteed to happen with the
struct zpci_dev still in Standby state ensuring it will not lead to
a zpci_release_device() call as at least the zPCI event handling code
still holds a reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
PCIe BW controller counted LBMS assertions for the purposes of the Target
Speed quirk (pcie_failed_link_retrain()). It was also a plan to expose the
LBMS count through sysfs to allow better diagnosing link related issues.
Lukas Wunner suggested, however, that adding a trace event would be better
for diagnostics purposes, leaving only pcie_failed_link_retrain() as a user
of the lbms_count.
The logic in pcie_failed_link_retrain() does not require keeping count of
LBMS assertions, so replace lbms_count with a simple flag in pci_dev's
priv_flags. The reduced complexity allows removing pcie_bwctrl_lbms_rwsem.
Since pcie_failed_link_retrain() runs before bwctrl is probed during boot,
the LBMS in Link Status register still has to be checked by the quirk.
The priv_flags numbering is not continuous because hotplug code added a few
flags to fill numbers 4-5 (hotplug and bwctrl changes are routed through in
different branches).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: squashed a fix to resolve build failures from
https://lore.kernel.org/all/20250508090036.1528-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20250422115548.1483-1-ilpo.jarvinen@linux.intel.com
With commit bcb5d6c769 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put().
Cc: stable@vger.kernel.org
Fixes: bcb5d6c769 ("s390/pci: introduce lock to synchronize state of zpci_dev's")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In February 2003, historic commit
https://git.kernel.org/tglx/history/c/280c1c9a0ea4
("[PATCH] PCI Hotplug: Replace pcihpfs with sysfs.")
removed all invocations of __get_free_page() and free_page() from the PCI
hotplug core without also removing the #include <linux/pagemap.h>
directive.
It removed all invocations of kern_mount(), mntget() and mntput()
without also removing the #include <linux/mount.h> directive.
It removed all invocations of lookup_hash()
without also removing the #include <linux/namei.h> directive.
It removed all invocations of copy_to_user() and copy_from_user()
without also removing the #include <linux/uaccess.h> directive.
These #include directives are still unnecessary today, so drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/c19e25bf2cefecc14e0822c6a9bb3a7f546258bc.1744640331.git.lukas@wunner.de
When a Secondary Bus Reset is issued at a hotplug port, it causes a Data
Link Layer State Changed event as a side effect. On hotplug ports using
in-band presence detect, it additionally causes a Presence Detect Changed
event.
These spurious events should not result in teardown and re-enumeration of
the device in the slot. Hence commit 2e35afaefe ("PCI: pciehp: Add
reset_slot() method") masked the Presence Detect Changed Enable bit in the
Slot Control register during a Secondary Bus Reset. Commit 06a8d89af5
("PCI: pciehp: Disable link notification across slot reset") additionally
masked the Data Link Layer State Changed Enable bit.
However masking those bits only disables interrupt generation (PCIe r6.2
sec 6.7.3.1). The events are still visible in the Slot Status register
and picked up by the IRQ handler if it runs during a Secondary Bus Reset.
This can happen if the interrupt is shared or if an unmasked hotplug event
occurs, e.g. Attention Button Pressed or Power Fault Detected.
The likelihood of this happening used to be small, so it wasn't much of a
problem in practice. That has changed with the recent introduction of
bandwidth control in v6.13-rc1 with commit 665745f274 ("PCI/bwctrl:
Re-add BW notification portdrv as PCIe BW controller"):
Bandwidth control shares the interrupt with PCIe hotplug. A Secondary Bus
Reset causes a Link Bandwidth Notification, so the hotplug IRQ handler
runs, picks up the masked events and tears down the device in the slot.
As a result, Joel reports VFIO passthrough failure of a GPU, which Ilpo
root-caused to the incorrect handling of masked hotplug events.
Clearly, a more reliable way is needed to ignore spurious hotplug events.
For Downstream Port Containment, a new ignore mechanism was introduced by
commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC").
It has been working reliably for the past four years.
Adapt it for Secondary Bus Resets.
Introduce two helpers to annotate code sections which cause spurious link
changes: pci_hp_ignore_link_change() and pci_hp_unignore_link_change()
Use those helpers in lieu of masking interrupts in the Slot Control
register.
Introduce a helper to check whether such a code section is executing
concurrently and if so, await it: pci_hp_spurious_link_change()
Invoke the helper in the hotplug IRQ thread pciehp_ist(). Re-use the
IRQ thread's existing code which ignores DPC-induced link changes unless
the link is unexpectedly down after reset recovery or the device was
replaced during the bus reset.
That code block in pciehp_ist() was previously only executed if a Data
Link Layer State Changed event has occurred. Additionally execute it for
Presence Detect Changed events. That's necessary for compatibility with
PCIe r1.0 hotplug ports because Data Link Layer State Changed didn't exist
before PCIe r1.1. DPC was added with PCIe r3.1 and thus DPC-capable
hotplug ports always support Data Link Layer State Changed events.
But the same cannot be assumed for Secondary Bus Reset, which already
existed in PCIe r1.0.
Secondary Bus Reset is only one of many causes of spurious link changes.
Others include runtime suspend to D3cold, firmware updates or FPGA
reconfiguration. The new pci_hp_{,un}ignore_link_change() helpers may be
used by all kinds of drivers to annotate such code sections, hence their
declarations are publicly visible in <linux/pci.h>. A case in point is
the Mellanox Ethernet driver which disables a firmware reset feature if
the Ethernet card is attached to a hotplug port, see commit 3d7a3f2612
("net/mlx5: Nack sync reset request when HotPlug is enabled"). Going
forward, PCIe hotplug will be able to cope gracefully with all such use
cases once the code sections are properly annotated.
The new helpers internally use two bits in struct pci_dev's priv_flags as
well as a wait_queue. This mirrors what was done for DPC by commit
a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC"). That may
be insufficient if spurious link changes are caused by multiple sources
simultaneously. An example might be a Secondary Bus Reset issued by AER
during FPGA reconfiguration. If this turns out to happen in real life,
support for it can easily be added by replacing the PCI_LINK_CHANGING flag
with an atomic_t counter incremented by pci_hp_ignore_link_change() and
decremented by pci_hp_unignore_link_change(). Instead of awaiting a zero
PCI_LINK_CHANGING flag, the pci_hp_spurious_link_change() helper would
then simply await a zero counter.
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/d04deaf49d634a2edf42bf3c06ed81b4ca54d17b.1744298239.git.lukas@wunner.de
Commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC")
amended PCIe hotplug to not bring down the slot upon Data Link Layer State
Changed events caused by Downstream Port Containment.
However Keith reports off-list that if the slot uses in-band presence
detect (i.e. Presence Detect State is derived from Data Link Layer Link
Active), DPC also causes a spurious Presence Detect Changed event.
This needs to be ignored as well.
Unfortunately there's no register indicating that in-band presence detect
is used. PCIe r5.0 sec 7.5.3.10 introduced the In-Band PD Disable bit in
the Slot Control Register. The PCIe hotplug driver sets this bit on
ports supporting it. But older ports may still use in-band presence
detect.
If in-band presence detect can be disabled, Presence Detect Changed events
occurring during DPC must not be ignored because they signal device
replacement. On all other ports, device replacement cannot be detected
reliably because the Presence Detect Changed event could be a side effect
of DPC. On those (older) ports, perform a best-effort device replacement
check by comparing the Vendor ID, Device ID and other data in Config Space
with the values cached in struct pci_dev. Use the existing helper
pciehp_device_replaced() to accomplish this. It is currently #ifdef'ed to
CONFIG_PM_SLEEP in pciehp_core.c, so move it to pciehp_hpc.c where most
other functions accessing config space reside.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/fa264ff71952915c4e35a53c89eb0cde8455a5c5.1744298239.git.lukas@wunner.de
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Drop shpchp module init/exit logging (Ilpo Järvinen)
- Replace shpchp dbg() with ctrl_dbg() and remove unused dbg(), err(),
info(), warn() wrappers (Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused .get_power(), .set_power() function pointers (Guilherme
Giacomo Simoes)
- Drop superfluous pci_hotplug_slot_list (Lukas Wunner)
- Drop superfluous try_module_get() calls (Lukas Wunner)
- Drop superfluous NULL pointer checks (Lukas Wunner)
- Pass struct hotplug_slot pointers directly to avoid backpointer
dereferencing in has_*_file() (Lukas Wunner)
- Inline pci_hp_{create,remove}_module_link() to reduce exported symbols
(Lukas Wunner)
- Disable hotplug interrupts in portdrv only when pciehp is not enabled to
prevent issuing two hotplug commands too close together (Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed to
address a common deadlock when resuming after a device was removed during
system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo
Järvinen)
* pci/hotplug:
PCI: pciehp: Don't enable HPIE when resuming in poll mode
PCI: pciehp: Avoid unnecessary device replacement check
PCI/portdrv: Only disable pciehp interrupts early when needed
PCI: hotplug: Inline pci_hp_{create,remove}_module_link()
PCI: hotplug: Avoid backpointer dereferencing in has_*_file()
PCI: hotplug: Drop superfluous NULL pointer checks in has_*_file()
PCI: hotplug: Drop superfluous try_module_get() calls
PCI: hotplug: Drop superfluous pci_hotplug_slot_list
PCI: cpcihp: Remove unused .get_power() and .set_power()
PCI: shpchp: Remove 'shpchp_debug' module parameter
PCI: shpchp: Remove unused logging wrappers
PCI: shpchp: Change dbg() -> ctrl_dbg()
PCI: shpchp: Remove logging from module init/exit functions
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60ed ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
Link: https://lore.kernel.org/r/20250321162114.3939-1-ilpo.jarvinen@linux.intel.com
Fixes: eb34da60ed ("PCI: pciehp: Disable hotplug interrupt during suspend")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Hot-removal of nested PCI hotplug ports suffers from a long-standing race
condition which can lead to a deadlock: A parent hotplug port acquires
pci_lock_rescan_remove(), then waits for pciehp to unbind from a child
hotplug port. Meanwhile that child hotplug port tries to acquire
pci_lock_rescan_remove() as well in order to remove its own children.
The deadlock only occurs if the parent acquires pci_lock_rescan_remove()
first, not if the child happens to acquire it first.
Several workarounds to avoid the issue have been proposed and discarded
over the years, e.g.:
https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/
A proper fix is being worked on, but needs more time as it is nontrivial
and necessarily intrusive.
Recent commit 9d573d1954 ("PCI: pciehp: Detect device replacement during
system sleep") provokes more frequent occurrence of the deadlock when
removing more than one Thunderbolt device during system sleep. The commit
sought to detect device replacement, but also triggered on device removal.
Differentiating reliably between replacement and removal is impossible
because pci_get_dsn() returns 0 both if the device was removed, as well as
if it was replaced with one lacking a Device Serial Number.
Avoid the more frequent occurrence of the deadlock by checking whether the
hotplug port itself was hot-removed. If so, there's no sense in checking
whether its child device was replaced.
This works because the ->resume_noirq() callback is invoked in top-down
order for the entire hierarchy: A parent hotplug port detecting device
replacement (or removal) marks all children as removed using
pci_dev_set_disconnected() and a child hotplug port can then reliably
detect being removed.
Link: https://lore.kernel.org/r/02f166e24c87d6cde4085865cce9adfdfd969688.1741674172.git.lukas@wunner.de
Fixes: 9d573d1954 ("PCI: pciehp: Detect device replacement during system sleep")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/83d9302a-f743-43e4-9de2-2dd66d91ab5b@panix.com/
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/r/20240926125909.2362244-1-acelan.kao@canonical.com/
Tested-by: Kenneth Crudup <kenny@panix.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.11+
For no apparent reason, the pci_hp_{create,remove}_module_link() helpers
live in slot.c, even though they're only called from two functions in
pci_hotplug_core.c.
Inline the helpers to reduce code size and number of exported symbols.
Link: https://lore.kernel.org/r/c207f03cfe32ae9002d9b453001a1dd63d9ab3fb.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions receive a struct pci_slot pointer which they have to
dereference back to a struct hotplug_slot.
Avoid by passing them a struct hotplug_slot pointer directly.
Link: https://lore.kernel.org/r/5b2f5b4ac45285953d00fd7637732a93fd40d26e.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions perform NULL pointer checks for the hotplug_slot and its
hotplug_slot_ops. However the callers already perform these checks:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_hp_deregister()
pci_hp_del()
The only way to actually trigger these checks is to call pci_hp_add()
without having called pci_hp_initialize().
Amend pci_hp_add() to catch that and drop the now superfluous NULL
pointer checks in has_*_file().
Drop the same superfluous checks from pci_hp_create_module_link(),
which is (only) called from pci_hp_add().
Link: https://lore.kernel.org/r/37d1928edf8c3201a8b10794f1db3142e16e02b9.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In December 2002, historic commit
https://git.kernel.org/tglx/history/c/bec7aa00ffe5
("[PATCH] more module warning fixes")
amended the PCI hotplug core to acquire a reference on the hotplug
driver module when a sysfs attribute is accessed. That was necessary
because back in the day, sysfs code did not take any precautions to
prevent module unloading when an attribute was accessed.
Soon after in July 2003, historic commit
https://git.kernel.org/tglx/history/c/1cf6d20f6078
("[PATCH] SYSFS: add module referencing to sysfs attribute files.")
addressed that deficiency. But the commit neglected to remove the now
unnecessary reference acquisition from the PCI hotplug core.
The commit acquired a module reference for the entire duration between
open() and close() of a sysfs attribute. This made it impossible to
unload a module while attributes were kept open by user space.
That's possible today:
When a hotplug driver module is unloaded, it removes sysfs attributes of
all its hotplug slots by calling pci_hp_del(). This will wait for any
concurrent user space operation to finish:
pci_hp_del()
fs_remove_slot()
sysfs_remove_file()
sysfs_remove_file_ns()
kernfs_remove_by_name_ns()
__kernfs_remove()
kernfs_drain()
A user space operation such as read() briefly acquires a reference on
the attribute with kernfs_get_active(). kernfs_drain() waits until all
such references are released before allowing attribute removal. Once
the attribute is removed, any subsequent user space operation on a still
open attribute file will return -ENODEV.
Thus, reference acquisition by the PCI hotplug core is still unnecessary
today. So drop it at long last.
Link: https://lore.kernel.org/r/ed950fa2722967be4491146c7b867c1e7be11d37.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.
But this can never happen because already on slot creation, an error is
returned and multiple messages are emitted if a slot's name is
duplicated:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_create_slot()
kobject_init_and_add()
kobject_add_varg()
kobject_add_internal()
create_dir()
sysfs_create_dir_ns()
kernfs_create_dir_ns()
sysfs_warn_dup()
pr_warn("cannot create duplicate filename ...")
pr_err("%s failed for %s with -EEXIST, ...");
Drop the superfluous list.
Link: https://lore.kernel.org/r/603735bc50eb370bc7f1c358441ac671360bab25.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The .get_power() and .set_power() function pointers in struct
cpci_hp_controller_ops were declared but never implemented by any
driver.
Thus, to improve code readability and reduce resource usage,
remove these pointers and the code that has never been used.
Link: https://lore.kernel.org/r/20250217185638.398925-1-trintaeoitogc@gmail.com
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
PCIe r6.0 added Flit mode, which mainly alters HW behavior, but there are
some OS visible changes. The OS visible changes include differences in the
layout of some capabilities and interpretation of the TLP headers (in
diagnostics situations).
To be able to determine which mode the PCIe Link is using, store the Flit
Mode Status (PCIe r6.1 sec 7.5.3.20) information in addition to the Link
speed into struct pci_bus in pcie_update_link_speed().
Link: https://lore.kernel.org/r/20250207161836.2755-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: use unsigned int:1 instead of bool, update flit_mode setting]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "shpchp_debug" module parameter is used to enable debug logging. The
generic ability to turn on/off debug prints dynamically covers this use
case already so there is no need for module specific debug handling. The
ctrl_dbg() wrapper also uses a low-level pci_printk() despite always using
KERN_DEBUG level.
Remove "shpchp_debug" parameter and convert ctrl_dbg() to use pci_dbg().
From now on, shpchp can be debugged using the normal dynamic debugger by
setting CONFIG_DYNAMIC_DEBUG=y and then either adding to kernel cmdline:
dyndbg="file drivers/pci/hotplug/shpchp* +p"
or using this command on a running kernel:
echo 'file drivers/pci/hotplug/shpchp* +p' > /sys/kernel/debug/dynamic_debug/control
Link: https://lore.kernel.org/r/20250217095550.2789-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The shpchp hotplug driver defines logging wrapper with generic names which
are just duplicates of existing generic printk() wrappers. They are also
unused so remove them.
Link: https://lore.kernel.org/r/20250217095550.2789-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pci-v1-4-c32360f495a7@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add hotplug controller driver for Marvell OCTEON multi-function device
where function 0 has a management console interface to enable/disable and
provision various personalities for the other functions (Shijith Thotton)
* pci/hotplug-octeon:
PCI: hotplug: Add OCTEON PCI hotplug controller driver
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Clean up cpqphp PCIBIOS_* return value confusion (Ilpo Järvinen)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection
in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and doesn't
handle devices below hot-added bridges (Ilpo Järvinen)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid
a use-after-free when the thunderbolt driver resets USB4 host routers on
boot, causing hotplug remove/add of downstream docks or other devices
(Lukas Wunner)
* pci/hotplug:
PCI: Fix use-after-free of slot->bus on hot remove
PCI: cpqphp: Simplify PCI_ScanBusForNonBridge()
PCI: cpqphp: Use define to read class/revision dword
PCI: cpqphp: Use pci_bus_read_dev_vendor_id() to detect presence
PCI: cpqphp: Fix PCIBIOS_* return value confusion
PCI: cpqphp: Remove unused struct ctrl_dbg.ctrl
PCI: cpcihp: Remove unused struct cpci_hp_controller_ops.hardware_test
- Convert driver .remove_new() callbacks to .remove() again to finish the
conversion from returning 'int' to being 'void' (Sergio Paracuellos)
* pci/driver-remove:
PCI: acpiphp_ampere_altra: Switch back to struct platform_driver::remove()
PCI: controller: Switch back to struct platform_driver::remove()
This mostly reverts the commit b4c7d2076b ("PCI/LINK: Remove bandwidth
notification"). An upcoming commit extends this driver building PCIe
bandwidth controller on top of it.
PCIe bandwidth notifications were first added in the commit e8303bb7a7
("PCI/LINK: Report degraded links via link bandwidth notification") but
later had to be removed. The significant changes compared with the old
bandwidth notification driver include:
1) Don't print the notifications into kernel log, just keep the Link
Speed cached in struct pci_bus updated. While somewhat unfortunate,
the log spam was the source of complaints that eventually lead to
the removal of the bandwidth notifications driver (see the links
below for further information).
2) Besides the Link Bandwidth Management Interrupt, also enable Link
Autonomous Bandwidth Interrupt to cover the other source of bandwidth
changes.
3) Handle Link Speed updates robustly. Refresh the cached Link Speed
when enabling Bandwidth Notification Interrupts, and solve the race
between Link Speed read and LBMS/LABS update in
pcie_bwnotif_irq_thread().
4) Use concurrency safe LNKCTL RMW operations.
5) The driver is now called PCIe bwctrl (bandwidth controller) instead
of just bandwidth notifications because of increased scope and
functionality within the driver.
6) Coexist with the Target Link Speed quirk in pcie_failed_link_retrain().
Provide LBMS counting API for it.
7) Tweaks to variable/functions names for consistency and length reasons.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes.
[bhelgaas: This is based on previous work by Alexandru Gagniuc
<mr.nuke.me@gmail.com>; see e8303bb7a7 ("PCI/LINK: Report degraded links
via link bandwidth notification")]
Link: https://lore.kernel.org/r/20241018144755.7875-7-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20190429185611.121751-1-helgaas@kernel.org/
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com/
Link: https://lore.kernel.org/linux-pci/20200115221008.GA191037@google.com/
Suggested-by: Lukas Wunner <lukas@wunner.de> # Building bwctrl on top of bwnotif
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash fix to drop IRQF_ONESHOT and convert to hardirq handler:
https://lore.kernel.org/r/20241115165717.15233-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a PCI hotplug controller driver for the OCTEON PCIe device. The OCTEON
PCIe device is a multi-function device where function 0 serves as the PCI
hotplug controller.
There is an out-of-band management console interface to firmware running on
function 0 whereby an administrator can disable functions to save power or
enable them with one of several personalities (virtio-net, virtio-crypto,
NVMe, etc) for the other functions. Function 0 initiates hotplug events
handled by this driver when the other functions are enabled or disabled.
+--------------------------------+
| Root Port |
+--------------------------------+
|
PCIe
|
+---------------------------------------------------------------+
| OCTEON PCIe Multifunction Device |
+---------------------------------------------------------------+
| | | |
| | | |
+---------------------+ +----------------+ +-----+ +----------------+
| Function 0 | | Function 1 | | ... | | Function 7 |
| (Hotplug controller)| | (Hotplug slot) | | | | (Hotplug slot) |
+---------------------+ +----------------+ +-----+ +----------------+
|
|
+-------------------------+
| Controller Firmware |
+-------------------------+
The hotplug controller driver enables hotplugging of non-controller
functions within the same device. During probing, the driver removes
the non-controller functions and registers them as PCI hotplug slots.
These slots are added back by the driver, only upon request from the
device firmware.
The controller uses MSI-X interrupts to notify the host of hotplug
events initiated by the OCTEON firmware. Additionally, the driver
allows users to enable or disable individual functions via sysfs slot
entries, as provided by the PCI hotplug framework.
Link: https://lore.kernel.org/r/20241111134523.2796699-1-sthotton@marvell.com
Co-developed-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
[bhelgaas: use pci_info() when possible]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pcie_update_link_speed() is passed the Link Status register but not all
callers have that value at hand nor need the value.
Refactor pcie_update_link_speed() to include reading the Link Status
register and create __pcie_update_link_speed() which can be used by the
hotplug code that has the register value at hand beforehand (and needs the
value for other purposes).
Link: https://lore.kernel.org/r/20241018144755.7875-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
PCI_ScanBusForNonBridge() has two loops, one to search for non-bridges and
a second to look for bridges. The second loop has hints in a debug print it
should do recursion for buses underneath the bridge, but no recursion is
attempted.
Since the second loop is quite useless in its current form, just eliminate
it. This code hasn't been touched for very long time so either it's unused
or the missing parts are not important enough for anyone to attempt to add
them.
Leave only a warning print and comment about the missing recursion for the
unlikely case that somebody comes across the lack of functionality. In any
case, search whether an endpoint exists downstream of a bridge sounds
generic enough to belong to core so if the functionality is to be extended
it should probably be moved into PCI core.
Link: https://lore.kernel.org/r/20241022091140.3504-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The intent of the first part in PCI_RefinedAccessConfig() is to read Vendor
ID register and detect presence of the device that way.
Remove PCI_RefinedAccessConfig() (which was not named very helpfully to
begin with) and replace the call with pci_bus_read_dev_vendor_id() + read
config because it makes the logic more obvious at the caller side.
Link: https://lore.kernel.org/r/20241022091140.3504-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
