It turns out that version 6 is still needed.
This change will be brought back once the FW that supports version 6 will no
longer be supported.
This reverts commit 24bc49d158 ("wifi: iwlwifi: remove support of several
iwl_ppag_table_cmd versions")
Link: https://patch.msgid.link/20250723064515.2084903-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This feature turns out to have an issue: it can take up to 8 seconds to
detect high throughput scenarios and to leave RX OMI bandwidth
reduction. This leads to throughput degradation.
Until the issues are fixed, remove the RX OMI implementation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.a9ccfe210516.Ic87bc7709a6761f593e88f1488a41442c68c1686@changeid
This version doesn't provide the sta id, so we need to look it up -
assuming that no other sta exists, since one of the conditions of
entering OMI is not having P2P/TDLS.
But when we leave OMI, because of the P2P/TDLS activation, the P2P/TDLS
sta can already exist while we receive the notification from the FW.
This causes an error log which is incorrect.
Since OMI is only supported in SC, which is not shipped yet, no one will
use a FW with the old version.
Remove support for it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b716b9cebaa7.I2a1cc4be441dbbb5566a9a3d2d330d956ff3ed38@changeid
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs,
but those don't even need the flexible part.
So, we add iwl_tx_cmd_v6_params, that will contain everything except the
flexible array and use this one for the containing structs.
Also, as part of the refactoring remove unused flex array `payload`.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp
[use iwl_tx_cmd_v6_params as described in the changed commit message]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The firmware provides the station id, use it since it makes our lives
easier. No need to assume we have a single BSS vif, and look up the
station id to whom the OMI was sent.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.7d2cd878855f.I8625ebb2c4e1fb484aafd16a07549f2eeb506e08@changeid
When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.
To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
Firmware would assert on undefined bits in DSM-originated DWs.
With this change, Firmware introduces a fail-safe mechanism
and removes the assert behavior. This ensures robustness when
handling raw DSM table data.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
Add a debugfs file to be able to control how long, at most,
the device will sleep before waking up the host. This will
be useful to test certain "assert during suspend" scenarios
for the previous change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250611222325.9f2a39cae1e1.Ie0003f21286fea50b507d0debe06332b030cd4cb@changeid
We have iwl_tx_cmd for devices older than 22000, iwl_tx_cmd_gen2 for
22000 devices, and iwl_tx_cmd_gen3 ax210 and up.
But the convention for all other APIs is to have the latest version
without any prefix and the older ones - with a _vX prefix,
where X is the highest version that this struct support.
The term 'gen' was introduced as the name of the (back then) new
transport, and should not be used as a device name (for that we have the
actual names: 22000, ax210, etc.)
Now as a new transport, called 'gen3', is going to be written and it can
be confused with this API.
Move iwl_tx_cmd to use the regular versioning convention.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.806e40c8f767.Ibc0e95e43a6fa6d47f72823bf804314d5db84618@changeid
Add support for a new version of link configuration command
which includes NPCA and high priority TX traffic support for wifi8.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add a new version of sta configuration command
which includes these wifi8 features:
1. LDPC X2 CW size support indication
2. Indication if ICF frame is needed instead of RTS
3. support for MIC padding delays for protected control frames
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Range response version 10 removes the rx and tx rates fields.
These fields aren't used by the driver anyway, so no change is
needed to support it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
FW sends new notification version 2 indicating whether activating EMLSR
mode is recommended or not. If recommendation is to leave EMLSR or force
leave then FW sends the reason. Add debug log for the reason sent by FW.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250503224231.0582726248a4.I9d1d00eb98d10a3a742cb3e06665ce10e5ec93f0@changeid
PPAG command version 7 will send exact data read from BIOS to
firmware without filtering/altering BIOS data. This enables the
driver to become purely a pipe for this feature.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.88ed7b2cadef.Iad78f6cec617d1f111b704352795dde81af71a99@changeid
This version has a new flag bit that indicates whether or not SMPS is
allowed for the MAC.
This only adds the API, the actual support will be done in other
patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.991ff01b8d16.Id0aa4061d7926753b03a13bf94ec1ac9e1d18745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use u8_get_bits() instead of open-coding, and adjust the
name as well. Also don't use enum nl80211_band for the
variable holding an entirely different type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.c41058510800.Ic3f16ce2f0c991fde2cfe7bcd58ee3b875575fce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware statistics were previously reporting bogus/old
channel load values if the device hadn't been active on a
given channel; it'll report an unknown value now for those
statistics affected (channel_load and channel_load_not_by_us.)
Handle that by simply skipping the value, the averaging would
result in the exact same value as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.db5410318642.I4d2981f68b915ad335bb02c926e9289c2a60ea6c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Earlier, the firmware could only request the reset handshake is
done during the dump, if the dump was split. However, it's also
needed when the dump isn't split, in which case it must be done
before the dump. The firmware now advertises this requirement,
so do the handshake in the non-split case when asked for.
Rename apply policy ..._RESET_HANDSHAKE to ..._SPLIT_DUMP_RESET
to more clearly indicate that this specific dump needs to be
split, while the handshake requirement overall is now indicated
by the new capability flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.10adafedb74b.Ie3911db1ebbd196ae4b0de1c53012aa1de193c0d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debugfs file in mld to retrieve TAS status per radio, TAS block list,
current mcc, OEM name and OEM allowed list. This will add ability to get
TAS status to user application via debugfs and required for debugging.
Add the required API definitions and some debug host command utils.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.66524c6ea198.I1625135284fc075148a55dd9ac629e94ca881fe4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new reason is added to the iwl_tas_statically_disabled_reason enum
and the corresponding message is updated in the
iwl_dbgfs_tas_get_status_read().
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.5e1272ef3508.I24f668ae716bee20cba15fdc73c3363693bbaf73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Removed mvm prefix from the following structures and enum names:
1. struct iwl_tas_status_per_mac
2. struct iwl_tas_status_resp
3. enum iwl_tas_dyna_status
4. enum iwl_tas_statically_disabled_reason
As these structures and enums are not specific to mvm.
Replaced TAS_LMAC_BAND_LB, TAS_LMAC_BAND_HB, and TAS_LMAC_BAND_UHB macros
with a generic BAND macro, as these macros are not specific to TAS.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.59144bee9987.Ic2678dcb5afdacc2ca234d4aa4901e7e1f6e8dbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwlwifi is the driver of all Intel wifi devices since 2008.
Since then, the hardware has changed a lot, but the firmware
API has changed even more. The need to keep one driver that
supports all those different APIs led us to introduce a new
architecture circa 2012 which allowed us to keep the same
interface to the hardware (DMAs, Tx queues, etc...) with a
new layer to implement the mid-layer between mac80211 and
the firmware. The first component is called the 'transport'
and the latter is called 'operation_mode' a.k.a op_mode.
In 2013 we took advantage of the new architecture to
introduce iwlmvm which allowed us to implement the, then,
new firmware API. This op_mode supports 7260 and up, those
devices supports support at least VHT.
Since then, wifi evolved and so did the firmware. It became
much bigger and took a lot of functionality from the driver.
It became increasingly hard to keep the same op_mode for the
newest devices and we experienced frequent regressions on
older devices. In order to avoid those regressions and keep
the code maintainable, we decided it was about time to start
a new op_mode.
iwlmld is a new op_mode that supports BE200 or newer if the
firmware being used is 97.ucode or newer. If the user has
an older devices or BE200 with .96.ucode, iwlmvm will be
loaded. Of course, this op_mode selection is seamless.
All the features supported in iwlmvm are supported in
iwlmld besides a few seldom used use cases: injection and
Hotspot 2.0. Those are under work.
A few points about the implementation:
* iwlmld doesn't have any mutexes, it relies on the
wiphy_lock
* iwlmld is more "resource oriented": stations, links and
interfaces are allocated and freed only after all the
relevant flows are completed.
* Firmware notifications' sizes are validated in a more
structured way.
We would love to see this new op_mode merged in 6.15. The
firmware for this new driver (.97.ucode) is not yet publicly
available but it'll be sent very soon.
People eager to get an early version of this firmware can
contact Emmanuel at:
emmanuel.grumbach@intel.com
I've listed the people who directly contributed
code, but many others from various teams have
contributed in other ways.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Co-developed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/
[fix Kconfig, fix api/phy.h includes, SPDX tag and coding
style issues, duplicated includes per 0-day robot]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
