It turns out that version 6 is still needed.
This change will be brought back once the FW that supports version 6 will no
longer be supported.
This reverts commit 24bc49d158 ("wifi: iwlwifi: remove support of several
iwl_ppag_table_cmd versions")
Link: https://patch.msgid.link/20250723064515.2084903-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This feature turns out to have an issue: it can take up to 8 seconds to
detect high throughput scenarios and to leave RX OMI bandwidth
reduction. This leads to throughput degradation.
Until the issues are fixed, remove the RX OMI implementation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.a9ccfe210516.Ic87bc7709a6761f593e88f1488a41442c68c1686@changeid
This version doesn't provide the sta id, so we need to look it up -
assuming that no other sta exists, since one of the conditions of
entering OMI is not having P2P/TDLS.
But when we leave OMI, because of the P2P/TDLS activation, the P2P/TDLS
sta can already exist while we receive the notification from the FW.
This causes an error log which is incorrect.
Since OMI is only supported in SC, which is not shipped yet, no one will
use a FW with the old version.
Remove support for it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b716b9cebaa7.I2a1cc4be441dbbb5566a9a3d2d330d956ff3ed38@changeid
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs,
but those don't even need the flexible part.
So, we add iwl_tx_cmd_v6_params, that will contain everything except the
flexible array and use this one for the containing structs.
Also, as part of the refactoring remove unused flex array `payload`.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp
[use iwl_tx_cmd_v6_params as described in the changed commit message]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The firmware provides the station id, use it since it makes our lives
easier. No need to assume we have a single BSS vif, and look up the
station id to whom the OMI was sent.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.7d2cd878855f.I8625ebb2c4e1fb484aafd16a07549f2eeb506e08@changeid
When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.
To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
Firmware would assert on undefined bits in DSM-originated DWs.
With this change, Firmware introduces a fail-safe mechanism
and removes the assert behavior. This ensures robustness when
handling raw DSM table data.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
Given compatibility issues with external PNVM data that doesn't match
the firmware it was designed with/for, future firmware releases will
include the PNVM data in the firmware files directly, avoiding those
mismatch issues. Make the driver load and use that embedded PNVM data
in preference of external files, falling back to the external file if
it isn't present.
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709081300.c843f77aa2d3.I7200f8dd40ef82aff1f5574fdd3966913cda592c@changeid
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://patch.msgid.link/20250612022501.3492345-1-liyuesong@vivo.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add a debugfs file to be able to control how long, at most,
the device will sleep before waking up the host. This will
be useful to test certain "assert during suspend" scenarios
for the previous change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250611222325.9f2a39cae1e1.Ie0003f21286fea50b507d0debe06332b030cd4cb@changeid
We have iwl_tx_cmd for devices older than 22000, iwl_tx_cmd_gen2 for
22000 devices, and iwl_tx_cmd_gen3 ax210 and up.
But the convention for all other APIs is to have the latest version
without any prefix and the older ones - with a _vX prefix,
where X is the highest version that this struct support.
The term 'gen' was introduced as the name of the (back then) new
transport, and should not be used as a device name (for that we have the
actual names: 22000, ax210, etc.)
Now as a new transport, called 'gen3', is going to be written and it can
be confused with this API.
Move iwl_tx_cmd to use the regular versioning convention.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.806e40c8f767.Ibc0e95e43a6fa6d47f72823bf804314d5db84618@changeid
There are a number of MAC parameters that are in the iwl_cfg
(which is the last config matched to the MAC/RF combination).
This isn't necessary, there are many more of those than MACs,
so move (most of) the data into the MAC family config struct.
Note that DCCM information remains for use by older devices,
and on 9000 series it'll be in struct iwl_cfg but be ignored
when the CRF is in a Qu/So platform.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Since 9000 series devices, the devices are split into MAC and
CRF parts. Currently, "struct iwl_cfg" reflects some MAC and
some RF parameters, but we want to clean this up and move the
MAC data to what's now "struct iwl_cfg_trans_params". As the
first step, to reflect the intent, rename this structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add support for a new version of link configuration command
which includes NPCA and high priority TX traffic support for wifi8.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add a new version of sta configuration command
which includes these wifi8 features:
1. LDPC X2 CW size support indication
2. Indication if ICF frame is needed instead of RTS
3. support for MIC padding delays for protected control frames
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Range response version 10 removes the rx and tx rates fields.
These fields aren't used by the driver anyway, so no change is
needed to support it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This sets both fwrt->uats_valid and returns 0, but in the
static inline it returns 0 without setting uats_valid,
which is confusing and the iwlmvm code misbehaves in this
case.
Since it already sets uats_valid, just remove the extra
return value.
Reported-by: Bjoern A. Zeeb <bz@FreeBSD.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.e981a7911228.Ic94b5e03e2053a08b84cabeb58ce3b6598fd9fc6@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
In order to set the CDB indication in the dump meta data, we read it from
a specific prph register.
There is a known issue with that register in Xnj setups - in that case it
will always indicate CDB.
Instead of detecting the jacket case and then hardcode whether the CDB
indication should or shouldn't be set (according the CRF),
we can retrieve the CDB bit from the hw_rf_id (CSR_HW_RF_ID).
There is also no reason to do it conditionally only for ax210 / BnJ.
Cleanup the code a bit.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.ea542a6c189e.I3d8cf5103b3747dfdd89985b45b592e419f97b63@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This is ephemeral data that's passed from the alive
response to the PNVM loading, so it doesn't need to
be stored. Pass it around instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250504132447.fe8be4454007.I24824f35620b21fe49e9243818c7188e431af48e@changeid
This really belongs there, it's needed early, so move it. Remove
the related but dead iwl_trans_pcie_ctx_info_gen3_set_step() while
at it. In iwlmld move the calls since they do part of the trans
configuration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250504132447.a4681ee11dd7.I6434a13d51932e984bb07695bc1cb931ebdcd27c@changeid
