For AML 25G/10G devices, some of the information returned from
phylink_ethtool_ksettings_get() is not correct, since there is a
fixed-link mode. So add additional corrections.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C94BF867617C544D+20250521064402.22348-7-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For the following patches to support PHYLINK for AML 25G devices,
separate MAC type wx_mac_aml40 to maintain the driver of 40G devices.
Because 40G devices will complete support later, not now.
And this patch makes the 25G devices use some PHYLINK interfaces, but it
is not yet create PHYLINK and cannot be used on its own. It is just
preparation for the next patches.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/592B1A6920867D0C+20250521064402.22348-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most of the different code that requires MAC type in the common library
is due to NGBE only supports a few queues and pools, unlike TXGBE, which
supports 128 queues and 64 pools. This difference accounts for most of
the hardware configuration differences in the driver code. So add a flag
bit "WX_FLAG_MULTI_64_FUNC" for them to clean-up the driver code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C731132E124D75E5+20250521064402.22348-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since device MAC types are constantly being added, the judgments of
wx->mac.type are complex. Try to convert the types to flags depending
on functions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250221065718.197544-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a new 40/25/10 Gigabit Ethernet device.
To support basic functions, PHYLINK is temporarily skipped as it is
intended to implement these configurations in the firmware. And the
associated link IRQ is also skipped.
And Implement the new SW-FW interaction interface, which use 64 Byte
message buffer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250221065718.197544-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the function get_ts_info and get_ts_stats in ethtool_ops to
get the HW capabilities and statistics for timestamping.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250218023432.146536-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add flow director filter match and miss statistics to ethtool -S.
And change the number of queues when using flow director for ehtool -l.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support to get and set msglevel for driver txgbe and ngbe.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to get RX/TX queue number with ethtool -l, and set RX/TX
queue number with ethtool -L. Since interrupts need to be rescheduled,
adjust the allocation of msix enties.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support to show RX/TX coalesce with ethtool -c and set RX/TX
coalesce with ethtool -C.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support to query RX/TX depth with ethtool -g, and change RX/TX depth
with ethtool -G.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to set pause params with ethtool -A and get pause
params with ethtool -a, for ethernet driver txgbe and ngbe.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the following implementation, add struct phylink and phylink_config
to wx structure. Add the helper function for converting phylink to wx,
implement ethtool ksetting and nway reset in libwx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts some basic cases of ethtool_sprintf() to
ethtool_puts().
The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
| ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
| ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
| ethtool_puts(&data, buffer[i].name);
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the basic ethtool ops get_drvinfo and get_link for ngbe and txgbe.
Ngbe implements get_link_ksettings, nway_reset and set_link_ksettings
for free using phylib code.
The code related to the physical interface is not yet fully implemented
in txgbe using phylink code. So do not implement get_link_ksettings,
nway_reset and set_link_ksettings in txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230214091527.69943-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
