This adds support for 10Gbs chip RTL8127A.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250515095303.3138-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ae866b71-c904-434e-befb-848c831e33ff@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0baad123-c679-4154-923f-fdc12783e900@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/97d7ae79-d021-4b6b-b424-89e5e305b029@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use pci_prepare_to_sleep() like PCI core does in pci_pm_suspend_noirq.
This aligns setting a low-power mode during shutdown with the handling
of the transition to system suspend. Also the transition to runtime
suspend uses pci_target_state() instead of setting D3hot unconditionally.
Note: pci_prepare_to_sleep() uses device_may_wakeup() to check whether
device may generate wakeup events. So we don't lose anything by
not passing tp->saved_wolopts any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/f573fdbd-ba6d-41c1-b68f-311d3c88db2c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new mac_version enum value RTL_GIGA_MAC_VER_LAST. Benefit is that
when adding support for a new chip version we have to touch less code,
except something changes fundamentally.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/06991f47-2aec-4aa2-8918-2c6e79332303@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor chip version detection and merge both configuration tables.
Apart from reducing the code by a third, this paves the way for
merging chip version handling if only difference is the firmware.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1fea533a-dd5a-4198-a9e2-895e11083947@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper for the Realtek-specific mechanism for accessing extended
config space if native access isn't possible.
This avoids code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/b368fd91-57d7-4cb5-9342-98b4d8fe9aea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Disable it due to it dose not meet ZRX-DC specification. If it is enabled,
device will exit L1 substate every 100ms. Disable it for saving more power
in L1 substate.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250318083721.4127-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch will enable RTL8168H/RTL8168EP/RTL8168FP ASPM support on
the platforms that have tested with ASPM enabled.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250318083721.4127-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid using deprecated pcim_iomap_table by switching to
pcim_iomap_region.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/a36b4cf3-c792-40fa-8164-5dc9d5f14dd0@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Realtek confirmed that all RTL8125/RTL8126 chip versions support up to
16K jumbo packets. Reflect this in the driver.
Tested by Rui on RTL8125B with 12K jumbo packets.
Suggested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/396762ad-cc65-4e60-b01e-8847db89e98b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The integrated PHYs on chip versions from RTL8168g allow to address
MDIO_MMD_VEND2 registers. All c22 standard registers are mapped to
MDIO_MMD_VEND2 registers. So far the paging mechanism is used to
address PHY registers. Add support for c45 ops to address MDIO_MMD_VEND2
registers directly, w/o the paging.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d6f97eaa-0f13-468f-89cb-75a41087bc4a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support for the Intel Killer E5000 which seems to be a
rebranded RTL8126. Copied from r8126 vendor driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9db73e9b-e2e8-45de-97a5-041c5f71d774@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consider that an EEE mode may not be broken but simply not supported
by the MAC, and rename function phy_set_eee_broken().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/30deb630-3f6b-4ffb-a1e6-a9736021f43a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY address is a dummy, because r8169 PHY access registers
don't support a PHY address. Therefore scan address 0 only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/830637dd-4016-4a68-92b3-618fcac6589d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temperature sensor is actually part of the integrated PHY and available
also on the standalone versions of the PHY. Therefore hwmon support will
be added to the Realtek PHY driver and can be removed here.
Fixes: 1ffcc8d413 ("r8169: add support for the temperature sensor being available from RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/afba85f5-987b-4449-83cc-350438af7fe7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for RTL8125BP rev.b. Its XID is 0x689. This chip supports
DASH and its dash type is "RTL_DASH_25_BP".
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250107064355.104711-1-hau@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
[hkallweit1@gmail.com: rebased after adjusted version numbering]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/75e5e9ec-d01f-43ac-b0f4-e7456baf18d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust version numbering for RTL8126, so that it doesn't overlap with
new RTL8125 versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6a354364-20e9-48ad-a198-468264288757@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new member visible to simplify setting the static visibility.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/dba77e76-be45-4a30-96c7-45e284072ad2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up to 982300c115 ("r8169: remove detection of chip
version 11 (early RTL8168b)"). Nobody complained yet, so remove
support for this chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b689ab6d-20b5-4b64-bd7e-531a0a972ba3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 854d71c555 ("r8169: remove original workaround for RTL8125
broken rx issue") this flag isn't used any longer. So remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/d9dd214b-3027-4f60-b0e8-6f34a0c76582@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor driver r8125 doesn't advertise 2.5G EEE on RTL8125A, and r8126
doesn't advertise 5G EEE. Likely there are compatibility issues,
therefore do the same in r8169.
With this change we don't have to disable 2.5G EEE advertisement in
rtl8125a_config_eee_phy() any longer.
We use new phylib accessor phy_set_eee_broken() to mark the respective
EEE modes as broken.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce185e10-8a2f-4cf8-a49b-fd8fb3c3c8a1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor drivers r8125/r8126 apply this additional magic setting when
enabling WAKE_PHY, so do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/51130715-45be-4db5-abb7-05d87e1f5df9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of new helper r8169_mod_reg8_cond() and move from a switch()
to an if() clause. Benefit is that we don't have to touch this piece of
code each time support for a new chip version is added.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/e1ccdb85-a4ed-4800-89c2-89770ff06452@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the register addresses with the names used in r8125/r8126
vendor driver, and consider that RSS_CTRL_8125 is a 32 bit register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/3bf2f340-b369-4174-97bf-fd38d4217492@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support for new chip version RTL8125D, which can be found on
boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
for this chip version is available in linux-firmware already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was reported that after resume from suspend a PCI error is logged
and connectivity is broken. Error message is:
PCI error (cmd = 0x0407, status_errs = 0x0000)
The message seems to be a red herring as none of the error bits is set,
and the PCI command register value also is normal. Exception handling
for a PCI error includes a chip reset what apparently brakes connectivity
here. The interrupt status bit triggering the PCI error handling isn't
actually used on PCIe chip versions, so it's not clear why this bit is
set by the chip. Fix this by ignoring this bit on PCIe chip versions.
Fixes: 0e4851502f ("r8169: merge with version 8.001.00 of Realtek's r8168 driver")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388
Tested-by: Atlas Yu <atlas.yu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove rtl_dash_loop_wait_high/low to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <fb8c490c-2d92-48f5-8bbf-1fc1f2ee1649@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
So far we use a custom flag to define when a task can be scheduled and
when not. Let's use the standard mechanism with disable_work() et al
instead.
Note that in rtl8169_close() we can remove the call to cancel_work()
because we now call disable_work_sync() in rtl8169_down() already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
There's not really a benefit here in taking the RTNL lock. The task
handler does exception handling only, so we're in trouble anyway when
we come here, and there's no need to protect against e.g. a parallel
ethtool call.
A benefit of removing the RTNL lock here is that we now can
synchronously cancel the workqueue from a context holding the RTNL mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This adds support for ethtool standard statistics, and makes use of the
extended hardware statistics being available from RTl8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/58e0da73-a7dd-4be3-82ae-d5b3f9069bde@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to problem reports in the past SG and TSO/TSO6 are disabled per
default. It's not fully clear which chip versions are affected, so we
may impact also users of unaffected chip versions, unless they know
how to use ethtool for enabling SG/TSO/TSO6.
Vendor drivers r8168/r8125 enable SG/TSO/TSO6 for selected chip
versions per default, I'd interpret this as confirmation that these
chip versions are unaffected. So let's do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have b9c7ac4fe2 ("r8169: disable ALDPS per default for
RTL8125"), the first attempt to fix the issue shouldn't be needed
any longer. So let's effectively revert 621735f590 ("r8169: fix
rare issue with broken rx after link-down on RTL8125") and see
whether anybody complains.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/382d8c88-cbce-400f-ad62-fda0181c7e38@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor drivers r8125/r8126 indicate that this quirk isn't needed
any longer for RTL8126A. Mimic this in r8169.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d1317187-aa81-4a69-b831-678436e4de62@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support for the temperature sensor being available from
RTL8125B. Register information was taken from r8125 vendor driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a spelling mistake in the struct field tx_underun, rename
it to tx_underrun.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
based on the one with XID 0x649, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
