This patch implements the CN20k MBOX communication between AF and
AF's VFs. This implementation uses separate trigger interrupts
for request, response messages against using trigger message data in CN10K.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-6-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This implementation uses separate trigger interrupts for request,
response MBOX messages against using trigger message data in CN10K.
This patch adds support for basic mbox implementation for CN20K
from AF side.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-4-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds basic mbox operation APIs and structures to add support
for mbox module on CN20k silicon. There are few CSR offsets, interrupts
changed between CN20k and prior Octeon series of devices.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Number of RVU PFs on CN20K silicon have increased to 96 from maximum
of 32 that were supported on earlier silicons. Every RVU PF and VF is
identified by HW using a 16bit PF_FUNC value. Due to the change in
Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed.
This patch handles the change by using helper functions(using silicon
check) to use PF,VF masks and shifts to support both new silicon CN20K,
OcteonTx series. These helper functions are used in different modules.
Also moved the NIX AF register offset macros to other files which
will be posted in coming patches.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AF driver assigns reserved MCAM entries (for unicast, broadcast,
etc.) based on the NIXLF number. When a NIXLF is detached, these entries
are disabled.
For example,
PF NIXLF
--------------------
PF0 0
SDP-VF0 1
If the user unbinds both PF0 and SDP-VF0 interfaces and then binds them in
reverse order
PF NIXLF
---------------------
SDP-VF0 0
PF0 1
In this scenario, the PF0 unicast entry is getting corrupted because
the MCAM entry contains stale data (SDP-VF0 ucast data)
This patch resolves the issue by clearing the unicast MCAM entry during
NIXLF detach
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last use of rvu_npc_enable_bcast_entry() was removed in 2021 by
commit 967db3529e ("octeontx2-af: add support for multicast/promisc
packet replication feature")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250420225810.171852-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although the PCI device ID and Vendor ID for the RPM (MAC) block
have remained the same across Octeon CN10K and the next-generation
CN20K silicon, Hardware architecture has changed (NIX mapped RPMs
and RFOE Mapped RPMs).
Add PCI Subsystem IDs to the device table to ensure that this driver
can be probed from NIX mapped RPM devices only.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250224035603.1220913-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During initialization, the AF driver resets all blocks. The RPM (MAC)
block and NIX block operate on a credit-based model. When the NIX block
resets during active traffic flow, it doesn't release credits to the RPM
block. This causes the RPM FIFO to overflow, leading to receive traffic
struck.
To address this issue, the patch introduces the following changes:
1. Stop receiving traffic at the MAC level during AF driver
initialization.
2. Perform an X2P reset (prevents RXFIFO of all LMACS from pushing data)
3. Reset the NIX block.
4. Clear the X2P reset and re-enable receiving traffic.
Fixes: 54d557815e ("octeontx2-af: Reset all RVU blocks")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implements the below requirement mentioned
in the representors documentation.
"
The representee's link state is controlled through the
representor. Setting the representor administratively UP
or DOWN should cause carrier ON or OFF at the representee.
"
This patch enables
- Reflecting the link state of representor based on the VF state and
link state of VF based on representor.
- On VF interface up/down a notification is sent via mbox to representor
to update the link state.
eg: ip link set eth0 up/down will disable carrier on/off
of the corresponding representor(r0p1) interface.
- On representor interface up/down will cause the link state update of VF.
eg: ip link set r0p1 up/down will disable carrier on/off
of the corresponding representee(eth0) interface.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current HW, do not support in-built switch which will forward pkts
between representee and representor. When representor is put under
a bridge and pkts needs to be sent to representee, then pkts from
representor are sent on a HW internal loopback channel, which again
will be punted to ingress pkt parser. Now the rules that this patch
installs are the MCAM filters/rules which will match against these
pkts and forward them to representee.
The rules that this patch installs are for basic
representor <=> representee path similar to Tun/TAP between VM and
Host.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds basic driver for the RVU representor.
Driver on probe does pci specific initialization and
does hw resources configuration. Introduces RVU_ESWITCH
kernel config to enable/disable the driver. Representor
and NIC shares the code but representors netdev support
subset of NIC functionality. Hence "otx2_rep_dev" API
helps to skip the features initialization that are not
supported by the representors.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink knobs to enable/disable counters on NPC
default rule entries.
Sample command to enable default rule counters:
devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime
Sample command to read the counter:
cat /sys/kernel/debug/cn10k/npc/mcam_rules
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20241105125620.2114301-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule
for better code reuse, which assumes necessary locks are taken at
higher level.
These low level functions would be used for implementing default rule
counter APIs in the subsequent patch.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241105125620.2114301-2-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d44 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Octeontx2 hardware uses Near Data Cache(NDC) block to cache
contexts in it so that access to LLC/DRAM can be avoided.
It is recommended in HRM to sync the NDC contents before
releasing/resetting LF resources. Hence implement NDC_SYNC
mailbox and sync contexts during driver teardown.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to dump NIX transmit queue topology.
There are multiple levels of scheduling/shaping supported by
NIX and a packet traverses through multiple levels before sending
the packet out. At each level, there are set of scheduling/shaping
rules applied to a packet flow.
Each packet traverses through multiple levels
SQ->SMQ->TL4->TL3->TL2->TL1 and these levels are mapped in a parent-child
relationship.
This patch dumps the debug information related to all TM Levels in
the following way.
Example:
$ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_tree
$ cat /sys/kernel/debug/octeontx2/nix/tm_tree
A more desriptive set of registers at each level can be dumped
in the following way.
Example:
$ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_topo
$ cat /sys/kernel/debug/octeontx2/nix/tm_topo
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.
Fixes: 5a6d7c9dae ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last patch which added support to extend the firmware shared
data to add channel data information has introduced a bug due to
the reserved space not adjusted accordingly.
This patch fixes the issue and also adds BUILD_BUG to avoid this
regression error.
Fixes: 997814491c ("Octeontx2-af: Fetch MAC channel info from firmware")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet ingress and egress MAC/serdes channel numbers are configurable
on CN10K series of silicons. These channel numbers inturn used while
installing MCAM rules to match ingress/egress port. Fetch these channel
numbers from firmware at driver init time.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCI device IDs of RVU device IDs are configurable and
RVU PF0's (ie AF's) are currently assumed as VFs that
identify loopback functionality ie LBKVFs. But in some
cases these VFs can be setup for different functionality.
Hence remove assumptions that AF's VFs are always LBK VFs
by renaming 'is_afvf' as 'is_lbkvf' explicitly and also
identify LBK VF using PCI dev ID. Similar change is done
for other VF types.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one
bpids and in some case they may not require at all.
These usescase can't be address with the current implementation
as it always reserves only one bpid per LBK channel.
This patch addresses this issue by creating free bpid pool from these
64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).
This patch also reduces the number of bpids for cgx interfaces to 8
and adds proper error code
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.
Fixes: a7faa68b4e ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some silicon variants the number of available CAM entries are
less. Reserving one entry for each NIX-LF for default DMAC based pkt
forwarding rules will reduce the number of available CAM entries
further. Hence add configurability via devlink to set maximum number of
NIX-LFs needed which inturn frees up some CAM entries.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When MCS external bypass is disabled, MCS returns additional
2 credits(32B) for every packet Tx'ed on LMAC. To account for
these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT
needs to be configured as otherwise NIX Tx credits would overflow
and will never be returned to idle state credit count
causing issues with credit control and MTU change.
This patch fixes the same by configuring CC_MCS_CNT at probe
time for MCS enabled SoC's
Fixes: bd69476e86 ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the number of outstanding store transactions issued by AP as
a part of LMTST operation is set to 1 i.e default value.
This patch set to max supported value to increase the performance.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231205055241.26355-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A new mailbox is added to support offloading of multicast/mirror
functionality. The mailbox also supports dynamic updation of the
multicast/mirror list.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the newer silicon versions in CN10K series supports a feature
where in the current PTP timestamp in HW can be updated atomically
without losing any cpu cycles unlike read/modify/write register.
This patch uses this feature so that PTP accuracy can be improved
while adjusting the master offset in HW. There is no need for SW
timecounter when using this feature. So removed references to SW
timecounter wherever appropriate.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AF driver configures MAC features like internal loopback and PFC upon
receiving the request from PF and its VF netdev. But these
features are not getting reset in FLR. This patch fixes the issue by
resetting the same.
Fixes: 23999b30ae ("octeontx2-af: Enable or disable CGX internal loopback")
Fixes: 1121f6b02e ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.
This patch corrects the mapping by adding a check for the same.
Fixes: c5a73b632b ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When multiple transmit scheduler queues feed a TL1 transmit link, the
SMQ flush initiated on a low priority queue might get stuck when a high
priority queue fully subscribes the transmit link. This inturn effects
interface teardown. To avoid this, temporarily XOFF all TL1's other
immediate child transmit scheduler queues and also clear any rate limit
configuration on all the scheduler queues in SMQ(flush) hierarchy.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all the TL3_TL2 nodes are being configured to enable
switch LBK channel 63 in them. Instead enable them only when switch
mode is enabled.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DWRR MTU config added for SDP and RPM/LBK links on CN10K
silicon is further extended on CK10KB silicon variant and made
it configurable. Now there are 4 DWRR MTU config to choose while
setting transmit scheduler's RR_WEIGHT.
Here we are reserving one config for each of RPM, SDP and LBK.
NIXX_AF_DWRR_MTUX(0) ---> RPM
NIXX_AF_DWRR_MTUX(1) ---> SDP
NIXX_AF_DWRR_MTUX(2) ---> LBK
PF/VF drivers can choose the DWRR_MTU to be used by setting
SMQX_CFG[pkt_link_type] to one of above. TLx_SCHEDULE[RR_WEIGHT]
is to be as configured 'quantum / 2^DWRR_MTUX[MTU]'. DWRR_MTU
of each link is exposed to PF/VF drivers via mailbox for
RR_WEIGHT calculation.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ptp timestamp is enabled in RPM, RPM will append 8B
timestamp header for all RX traffic. MCS need to skip these
8 bytes header while parsing the packet header, so that
correct tcam key is created for lookup.
This patch fixes the mcs parser configuration to skip this
8B header for ptp packets.
Fixes: ca7f49ff88 ("octeontx2-af: cn10k: Introduce driver for macsec block.")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes: 4a3581cd59 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds workaround for below 2 HW erratas
1. Due to improper clock gating, NIXRX may free the same
NPA buffer multiple times.. to avoid this, always enable
NIX RX conditional clock.
2. NIX FIFO does not get initialized on reset, if the SMQ
flush is triggered before the first packet is processed, it
will lead to undefined state. The workaround to perform SMQ
flush only if packet count is non-zero in MDQ.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
OcteonTx2's next gen platform the CN10KB has RPM_USX MAC which has a
different serdes when compared to RPM MAC. Though the underlying
HW is different, the CSR interface has been designed largely inline
with RPM MAC, with few exceptions though. So we are using the same
CGX driver for RPM_USX MAC as well and will have a different set of APIs
for RPM_USX where ever necessary.
The RPM and RPM_USX blocks support a different number of LMACS.
RPM_USX support 8 LMACS per MAC block whereas legacy RPM supports only 4
LMACS per MAC. with this RPM_USX support double the number of DMAC filters
and fifo size.
This patch adds initial support for CN10KB's RPM_USX MAC i.e registering
the driver and defining MAC operations (mac_ops). Adds the logic to
configure internal loopback and pause frames and assign FIFO length to
LMACS.
Kernel reads lmac features like lmac type, autoneg, etc from shared
firmware data this structure only supports 4 lmacs per MAC, this patch
extends this structure to accommodate 8 lmacs.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most of the code in CGX/RPM driver assumes that max lmacs per
given MAC as always, 4 and the number of MAC blocks also as 4.
With this assumption, the max number of interfaces supported is
hardcoded to 16. This creates a problem as next gen CN10KB silicon
MAC supports 8 lmacs per MAC block.
This patch solves the problem by using "max lmac per MAC block"
value from constant csrs and uses cgx_cnt_max value which is
populated based number of MAC blocks supported by silicon.
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
a. Total of 4 bytes from start of UDP header(src port
+ destination port)
or
b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds debugfs entry to dump MCS secy, sc,
sa, flowid and port stats. This helps in debugging
the packet path and to figure out where exactly packet
was dropped.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware triggers an interrupt for events like PN wrap to zero,
PN crosses set threshold. This interrupt is received
by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped
and notifies them using mcs_intr_notify mbox message.
PF/VF using mcs_intr_cfg mbox can configure the list
of interrupts for which they want to receive the
notification from AF.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Out of all the TCAM entries, reserve last TX and RX TCAM flow
entry(low priority) so that normal traffic can be sent out and
received. The traffic which needs macsec processing hits the
high priority TCAM flows. Also install a FLR handler to free
the allocated resources for PF/VF.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and
decrypt packets at MAC level. This block is a global resource
with hardware resources like SecYs, SCs and SAs and is in
between NIX block and RPM LMAC. CN10K-B silicon has only one MCS
block which receives packets from all LMACS whereas CNF10K-B has
seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. Those
differences between IPs are handled using separate ops.
This patch adds basic driver and does the initial hardware
calibration and parser configuration.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
