Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arnd reported that there are two build warning for on-stasck
buffer oversize. As Arnd's suggestion, using seq file way
to avoid the stack buffer or kmalloc buffer allocating.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/all/20250610092113.2639248-1-arnd@kernel.org/
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250714061037.2616413-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A static alarm exists in the hns and needs to be cleared.
The alarm is comparison of integer expressions of different
signedness including 's64' and 'long unsigned int',
'int' and 'long unsigned int', 'u32' and 'int',
'int' and 'unsigned int'.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250623040043.857782-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the print message more clearly, add \n at the and of message if
it is missing currently.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250623040043.857782-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are too many indirection layers in the HNS3 driver code,
This issue was previously discussed with the maintainer,
who suggested adding a helper function to fix the issue.
In fact, the hns3_get_ops() helper is already defined
and can fix this issue.
This patch uses hns3_get_ops() helper to reduce the unnecessary
middle layer conversion. Apply it to the whole HNS3 driver.
The former discusstion can be checked from the link.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230310081404.947-1-lanhao@huawei.com/
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250623040043.857782-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are too many indirection layers in the HNS3 driver code.
This issue was previously discussed with the maintainer,
who suggested adding a helper function to fix the issue.
In fact, the hns3_get_ae_dev() helper is already defined
and can fix this issue.
This patch uses hns3_get_ae_dev() helper to reduce the unnecessary
middle layer conversion. Apply it to the whole HNS3 driver.
The former discusstion can be checked from the link.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230310081404.947-1-lanhao@huawei.com/
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250623040043.857782-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No driver should spam the kernel log when merely being loaded.
The message in hclge_init() is clearly a debug message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/c2ac6f20f85056e7b35bd56d424040f996d32109.1749657070.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process.
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit d80a309130, reversing
changes made to 637f414763:
2cf2461435 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34 ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961a ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff1 ("net: hns3: don't auto enable misc vector")
2758f18a83 ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc466 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899ca ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b ("net: hns3: default enable tx bounce buffer when smmu enabled")
The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.
Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.
This is a supplement for the previous patch.
We want all the tx packet can be handled with tx bounce buffer path.
But it depends on the remain space of the spare buffer, checked by the
hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true.
But once it return false by no available space, the packet will be handled
with the former path, which will map/unmap the skb buffer.
Then the driver will face the smmu prefetch risk again.
So add a sync command in this case to avoid smmu prefectch,
just protects corner scenes.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normal set of driver updates and small fixes:
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs, GID's
and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZkeo2gAKCRCFwuHvBreF
YbuNAQChzGmS4F0JAn5Wj0CDvkZghELqtvzEb92SzqcgdyQafAD/fC7f23LJ4OsO
1ZIaQEZu7j9DVg5PKFZ7WfdXjGTKqwA=
=QRXg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Aside from the usual things this has an arch update for
__iowrite64_copy() used by the RDMA drivers.
This API was intended to generate large 64 byte MemWr TLPs on PCI.
These days most processors had done this by just repeating writel() in
a loop. S390 and some new ARM64 designs require a special helper to
get this to generate.
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs,
GID's and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
RDMA/IPoIB: Fix format truncation compilation errors
bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
RDMA/efa: Support QP with unsolicited write w/ imm. receive
IB/hfi1: Remove generic .ndo_get_stats64
IB/hfi1: Do not use custom stat allocator
RDMA/hfi1: Use RMW accessors for changing LNKCTL2
RDMA/mana_ib: implement uapi for creation of rnic cq
RDMA/mana_ib: boundary check before installing cq callbacks
RDMA/mana_ib: introduce a helper to remove cq callbacks
RDMA/mana_ib: create and destroy RNIC cqs
RDMA/mana_ib: create EQs for RNIC CQs
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/ipoib: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
RDMA/core: Add an option to display driver-specific QPs in the rdmatool
RDMA/efa: Add shutdown notifier
RDMA/mana_ib: Fix missing ret value
IB/mlx5: Use __iowrite64_copy() for write combining stores
...
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the ARM64 arch implementation does the DGH as part of
__iowrite64_copy() there is no reason to open code this in drivers.
Link: https://lore.kernel.org/r/5-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may
return fail, then the value of mac_addr_temp is not initialized.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.
Fixes: 20d06ca267 ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093] __switch_to+0x7c/0xbc
[ 3147.261183] __schedule+0x338/0x6f0
[ 3147.265357] schedule+0x50/0xe0
[ 3147.269185] schedule_preempt_disabled+0x18/0x24
[ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880] __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839] mutex_lock+0x50/0x60
[ 3147.288841] rtnl_lock+0x20/0x2c
[ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718] hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109] process_one_work+0x1d0/0x490
[ 3147.319805] worker_thread+0x158/0x3d0
[ 3147.324240] kthread+0x108/0x13c
[ 3147.328154] ret_from_fork+0x10/0x18
In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().
This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().
Fixes: 04b6ba1435 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split types and pure function declarations from page_pool.h
and add them in page_page/types.h, so that C sources can
include page_pool.h and headers should generally only include
page_pool/types.h as suggested by jakub.
Rename page_pool.h to page_pool/helpers.h to have both in
one place.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com
[Jakub: change microsoft/mana, fix kdoc paths in Documentation]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several functions in the hns3 driver have unused parameters.
The compiler will warn about them when building
with -Wunused-parameter option of hns3.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Similar to skb_eth_hdr() introduced in commit 96cc4b6958 ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mqprio is a scheduler and not a classifier, move its offload
structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies.
Also update some header inclusions in drivers that access this
structure, to the best of my abilities.
Cc: Igor Russkikh <irusskikh@marvell.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For device supports RXD advanced layout, the driver will
return directly if the hardware finish the checksum
calculate. It cause missing L3E checking for ip packets.
Fixes it.
Fixes: 1ddc028ac8 ("net: hns3: refactor out RX completion checksum")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.
Fixes: e74a726da2 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.
Fixes: 796640778c ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea48586707 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when function hns3_nic_select_queue() converts dscp to priority,
it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority.
However as function hns3_nic_select_queue() is in fast path, the indirect
call may cause degradation of performance. For optimization, this patch
moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct
hnae3_knic_private_info, so they can be used in both hclge and hns3 layers.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add support for external loopback test.
The successful test need the link is up with duplex full. The
driver do external loopback first, and then the whole offline
test.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support tx packets to select queue according to its dscp field after
setting dscp and tc map relationship, this patch implements
ndo_select_queue() to set skb->priority according to the user's setting
dscp and priority map relationship.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As some new devices may not support GRO offload and flow table director,
to support these devices, driver needs to querying capabilities of GRO
offload and flow table director from firmware. Whether the driver
supports these two features depends on capabilities.
For old device of version HNAE3_DEVICE_VERSION_V2, driver sets their
capabilities of these two features to fixed value.
Setting default features of netdev and debugfs also need to identify
whether support these two features.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
