The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071 ("enic: handle mtu change for vf properly")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: John Daley <johndale@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is trivial.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Enic started using netif_get_num_default_rss_queues() to set the number
of RQs used in commit cc94d6c4d4 ("enic: Adjust used MSI-X
wq/rq/cq/interrupt resources in a more robust way")
This resulted in machines with less than 16 cpus using less than 8 RQs.
Allow enic to use at least 8 RQs no matter how many cpus are in the
machine to not impact existing enic workloads after a kernel upgrade.
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521-enic_min_8rq-v1-1-691bd2353273@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enables reading the max rq and wq entries supported from the hw.
Enables 16k rq and wq entries on hw that supports.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-8-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cleans up the enic wq request completion path needed for 16k wq size
support.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-7-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Moves wq related function to enic_wq.c. Prepares for
a cleaup of enic wq code path.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-6-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enables getting from hw all the supported rq cq sizes and
uses the highest supported cq size.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-4-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adds the defines for 32 and 64 byte receive queue completion queue
descriptors.
Adds devcmd define to get rq cq descriptor size/s supported by hw.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-3-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Separates enic rx path from generic vnic api. Removes some
complexity of doign enic callbacks through vnic api in rx.
This is in preparation for enabling enic extended cq which
applies only to enic rx path.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-2-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Moves cq_enet_rq_desc_dec from cq_enet_desc.h to enic_rq.c.
This is in preparation for enic extended completion queue
enabling.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-1-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the move to using the Page Pool API for RX, rx copybreak was not
showing any improvement in host CPU overhead, latency or bandwidth so
the driver no longer makes use of the rx_copybreak setting. This patch
removes the ethtool tuneable hooks to set and get the rx copybreak since
they and now no-ops. Rx copybreak was the only tunable supported, so
remove the set and get tunable callbacks all together.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-5-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Page Pool API improves bandwidth and CPU overhead by recycling pages
instead of allocating new buffers in the driver. Make use of page pool
fragment allocation for smaller MTUs so that multiple packets can share
a page. For MTUs larger than PAGE_SIZE, adjust the 'order' page
parameter so that contiguous pages can be used to receive the larger
packets.
The RQ descriptor field 'os_buf' is repurposed to hold page pointers
allocated from page_pool instead of SKBs. When packets arrive, SKBs are
allocated and the page pointers are attached instead of preallocating SKBs.
'alloc_fail' netdev statistic is incremented when page_pool_dev_alloc()
fails.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split up RX handler functions in preparation for moving
to a page pool based implementation.
No functional changes.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RX handler code into its own file in preparation for further
changes. Some formatting changes were necessary in order to satisfy
checkpatch but there were no functional changes.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX adaptive interrupt moderation table is indexed by link speed
range, where the last row of the table is the catch-all for all link
speeds greater than 10Gbps. The comment said 10 - 40Gbps, but since
there are now adapters with link speeds than 40Gbps, the comment is now
wrong and should indicate it applies to all speeds greater than 10Gbps.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link speed is obtained in the RX adaptive coalescing function. It
was being called at probe time when the link may not be up. Change the
call to run after the Link comes up.
The impact of not getting the correct link speed was that the low end of
the adaptive interrupt range was always being set to 0 which could have
caused a slight increase in the number of RX interrupts.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the function used for setting the RX coalescing range to before
the function that checks the link status. It needs to be called from
there instead of from the probe function.
There is no functional change.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250107214159.18807-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the kdump check into enic_adjust_resources() so that everything
that modifies resources is in the same function.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-7-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the enic resource adjustments out of enic_set_intr_mode() and into
its own function, enic_adjust_resources().
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-6-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of failing to use MSI-X if resources aren't configured exactly
right, use the resources we do have. Since we could start using large
numbers of rq resources, we do limit the rq count to what
netif_get_num_default_rss_queues() recommends.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-5-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allocate wq, rq, cq, intr, and napi arrays based on the number of
resources configured in the VIC.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-4-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Save the resources counts for wq,rq,cq, and interrupts in *_avail variables
so that we don't lose the information when adjusting the counts we are
actually using.
Report the wq_avail and rq_avail as the channel maximums in 'ethtool -l'
output.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-3-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VIC hardware has a constraint that the MSIX interrupt used for errors
be specified as a 7 bit number. Before this patch, it was allocated after
the I/O interrupts, which would cause a problem if 128 or more I/O
interrupts are in use.
So make the required interrupts come before the I/O interrupts to
guarantee the error interrupt offset never exceeds 7 bits.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-2-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bundling the wq/rq specific data into dedicated enic_wq/rq structures
cleans up the enic structure and simplifies future changes related to
wq/rq.
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-1-a34cf8570c67@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-9-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add .get_channel to enic_ethtool_ops to enable basic ethtool -l
support to get the current channel configuration.
Note that the driver does not support dynamically changing queue
configuration, so .set_channel is intentionally unused. Instead, users
should use Cisco's hardware management tools (UCSM/IMC) to modify
virtual interface card configuration out of band.
Signed-off-by: Jon Kohler <jon@nutanix.com>
Link: https://patch.msgid.link/20240627202013.2398217-1-jon@nutanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes: f8bd909183 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the hardcoded values used in the calculations for
vnic descriptors and rings with defines. Minor code cleanup.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel
code base has been converted to flexible arrays. In order to enforce
the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized
destinations need to be handled. Unfortunately, struct vic_provinfo
resists full conversion, as it contains a flexible array of flexible
arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change comments incorrectly mentioning dev_base_lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw
Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool
Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2
Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5}
Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena
Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet
Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
