This moves bnxt_hsi.h contents to a common location so it can be
properly referenced by bnxt_en, bnxt_re, and bnge.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250714170202.39688-1-gospo@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250617014555.434790-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027 ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.
Fix it by clearing the buffer before returning.
Fixes: 895621f1c8 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for adding .set_module_eeprom_by_page(), extract the
common error checking done in bnxt_get_module_eeprom_by_page() into
a new common function that can be re-used for
.set_module_eeprom_by_page().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-7-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When doing a live coredump with ethtool -w, the context data cached
in the NIC is not dumped by the FW by default. The reason is that
retrieving this cached context data with traffic running may cause
problems. Add a new dump flag 3 to allow the option to include this
cached context data which may be useful in some debug scenarios.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-2-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The core has the current HDS config, it can pre-populate the values
for the drivers. While at it, remove the zero-setting in netdevsim.
Zero are the default values since the config is zalloc'ed.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds with gcc 14.2.1 report:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]
4193 | "/pkg %s", buf);
It's upset that we let buf be full length but then we use 5
characters for "/pkg ".
The builds is also clear with clang version 19.1.5 now.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bnxt_en driver has configured the hds_threshold value automatically
when TPA is enabled based on the rx-copybreak default value.
Now the hds-thresh ethtool command is added, so it adds an
implementation of hds-thresh option.
Configuration of the hds-thresh is applied only when
the tcp-data-split is enabled. The default value of
hds-thresh is 256, which is the default value of
rx-copybreak, which used to be the hds_thresh value.
The maximum hds-thresh is 1023.
# Example:
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NICs that uses bnxt_en driver supports tcp-data-split feature by the
name of HDS(header-data-split).
But there is no implementation for the HDS to enable by ethtool.
Only getting the current HDS status is implemented and The HDS is just
automatically enabled only when either LRO, HW-GRO, or JUMBO is enabled.
The hds_threshold follows rx-copybreak value. and it was unchangeable.
This implements `ethtool -G <interface name> tcp-data-split <value>`
command option.
The value can be <on> and <auto>.
The value is <auto> and one of LRO/GRO/JUMBO is enabled, HDS is
automatically enabled and all LRO/GRO/JUMBO are disabled, HDS is
automatically disabled.
HDS feature relies on the aggregation ring.
So, if HDS is enabled, the bnxt_en driver initializes the aggregation ring.
This is the reason why BNXT_FLAG_AGG_RINGS contains HDS condition.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-8-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bnxt_en driver supports rx-copybreak, but it couldn't be set by
userspace. Only the default value(256) has worked.
This patch makes the bnxt_en driver support following command.
`ethtool --set-tunable <devname> rx-copybreak <value> ` and
`ethtool --get-tunable <devname> rx-copybreak`.
By this patch, hds_threshol is set to the rx-copybreak value.
But it will be set by `ethtool -G eth0 hds-thresh N`
in the next patch.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-7-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer firmware does not allow reading the PXP registers during
ethtool -d, so skip the firmware call in that case. Userspace
(bnxt.c) always expects the register block to be populated so
zeroes will be returned instead.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241217182620.2454075-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call the new HWRM_PORT_MAC_QCAPS to check if mac loopback is
supported. Skip the MAC loopback ethtool self test if it is
not supported.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241217182620.2454075-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skip PHY loopback selftest if firmware advertises that it is unsupported
in the HWRM_PORT_PHY_QCAPS call. Only show PHY loopback test result to
be 0 if the test has run and passes. Do the same for external loopback
to be consistent.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241217182620.2454075-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Block all ethtool module operations on an untrusted VF. The firmware
won't allow it and will return error.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241217182620.2454075-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2f4f9fe5bf ("bnxt_en: Support adding ntuple rules on RSS
contexts") added support for redirecting to an RSS context as an ntuple
rule action. However, it forgot to update the ETHTOOL_GRXCLSRULE
codepath. This caused `ethtool -n` to always report the action as
"Action: Direct to queue 0" which is wrong.
Fix by teaching bnxt driver to report the RSS context when applicable.
Fixes: 2f4f9fe5bf ("bnxt_en: Support adding ntuple rules on RSS contexts")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://patch.msgid.link/2e884ae39e08dc5123be7c170a6089cefe6a78f7.1732748253.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the return value from bnxt_get_media() to determine the port and
link modes. bnxt_get_media() returns the proper BNXT_MEDIA_KR when
the PHY is backplane. This will correct the ethtool settings for
backplane devices.
Fixes: 5d4e1bf606 ("bnxt_en: extend media types to supported and autoneg modes")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new ethtool -W dump flag (2) to include driver coredump segments.
This patch adds the host backing store context memory pages used by the
chip and FW to store various states to the coredump. The pages for
each context memory type is dumped into a separate coredump segment.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241115151438.550106-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, trying to insert an ip4/ip6 ntuple rule with an unset
l4proto would get rejected with -EOPNOTSUPP. For example, the following
would fail:
ethtool -N eth0 flow-type ip6 dst-ip $IP6 context 1
The reason was that all the l4proto validation was being run despite the
l4proto mask being set to 0x0. Fix by respecting the mask on l4proto and
treating a mask of 0x0 as wildcard l4proto.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/1ac93a2836b25f79e7045f8874d9a17875229ffc.1730778566.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9ba0e56199 ("bnxt_en: Enhance ethtool ntuple support for ip
flows besides TCP/UDP") added support for ip4/ip6 ntuple rules.
However, if you wanted to wildcard over l4proto, you had to provide
0xFF.
The choice of 0xFF is non-standard and non-intuitive. Delete support for
it in this commit. Next commit we will introduce a cleaner way to
wildcard l4proto.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/a5ba0d3bd926d27977c317efa7fdfbc8a704d2b8.1730778566.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoids having to use manual pointer manipulation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241029233229.9385-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_check_rings() is called to ensure that we have the hardware ring
resources before committing to reinitialize with the new number of
rings. MSIX vectors are never checked at this point, because up
until recently we must first disable MSIX before we can allocate the
new set of MSIX vectors.
Now that we support dynamic MSIX allocation, check to make sure we
can dynamically allocate the new MSIX vectors as the last step in
bnxt_check_rings() if dynamic MSIX is supported.
For example, the IOMMU group may limit the number of MSIX vectors
for the device. With this patch, the ring change will fail more
gracefully when there is not enough MSIX vectors.
It is also better to move bnxt_check_rings() to be called as the last
step when changing ethtool rings.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240906144632.404651-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for retrieving crash dump using ethtool -w on the
supported interface.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently blindly deletes its cache of RSS cotexts and
ntuple filters when the ethtool channel count is changing. It also
deletes the ntuple filters cache when the default indirection table
is changing.
The core will not allow ethtool channels to drop below any that
have been configured as ntuple destinations since this commit from 2022:
47f3ecf476 ("ethtool: Fail number of channels change when it conflicts with rxnfc")
So there is absolutely no need to delete the ntuple filters and
RSS contexts when changing ethtool channels.
It is also unnecessary to delete ntuple filters when the default
RSS indirection table is changing.
Remove bnxt_clear_usr_fltrs() and bnxt_clear_rss_ctxis() from the
ethtool ops and change them to static functions.
This bug will cause confusion to the end user and causes failure when
running the rss_ctx.py selftest.
Fixes: 1018319f94 ("bnxt_en: Invalidate user filters when needed")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240725111912.7bc17cf6@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240814225429.199280-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This corrects an out-by-one error in the maximum length of the package
version string. The size argument of snprintf includes space for the
trailing '\0' byte, so there is no need to allow extra space for it by
reducing the value of the size argument by 1.
Found by inspection.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240813-bnxt-str-v2-1-872050a157e7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
marvell/otx2 and mvpp2 do not support setting different
keys for different RSS contexts. Contexts have separate
indirection tables but key is shared with all other contexts.
This is likely fine, indirection table is the most important
piece.
Don't report the key-related parameters from such drivers.
This prevents driver-errors, e.g. otx2 always writes
the main key, even when user asks to change per-context key.
The second reason is that without this change tracking
the keys by the core gets complicated. Even if the driver
correctly reject setting key with rss_context != 0,
change of the main key would have to be reflected in
the XArray for all additional contexts.
Since the additional contexts don't have their own keys
not including the attributes (in Netlink speak) seems
intuitive. ethtool CLI seems to deal with it just fine.
Having to set the flag in majority of the drivers is
a bit tedious but not reporting the key is a safer
default.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove .cap_rss_ctx_supported from drivers which moved to the new API.
This makes it easy to grep for drivers which still need to be converted.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab186 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As described in the kdoc for .create_rxfh_context we are responsible
for populating the defaults. The core will not call .get_rxfh
for non-0 context.
The problem can be easily observed since Netlink doesn't currently
use the cache. Using netlink ethtool:
$ ethtool -x eth0 context 1
[...]
RSS hash key:
13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c
RSS hash function:
toeplitz: on
xor: off
crc32: off
But using IOCTL ethtool shows:
$ ./ethtool-old -x eth0 context 1
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
RSS hash function:
Operation not supported
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit under Fixes I split the bnxt_set_rxfh_context() function,
and attached the appropriate chunks to new ops. I missed that
bnxt_set_rxfh_context() gets called after some initial checks
in bnxt_set_rxfh(), namely that the hash function is Toeplitz.
Fixes: 5c466b4d4e ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of allocating a separate indir table in the vnic use
the one already present in the RSS context allocated by the core.
This saves some LoC and also we won't have to worry about syncing
the local version back to the core, once core learns how to dump
contexts.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethtool core stores indirection table with u32 entries, "just to be safe".
Switch the type in the driver, so that it's easier to swap local tables
for the core ones. Memory allocations already use sizeof(*entry), switch
the memset()s as well.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt allocates tables of max size, and changes the used size
based on number of active rings. The unused entries get padded
out with zeros. bnxt_modify_rss() seems to always pad out
the table of the main / default RSS context, instead of
the table of the modified context.
I haven't observed any behavior change due to this patch,
so I don't think it's a fix. Not entirely sure what role
the padding plays, 0 is a valid queue ID.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core already maintains all RSS contexts in an XArray, no need
to keep a second list in the driver.
Remove bnxt_get_max_rss_ctx_ring() completely since core performs
the same check already.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core can allocate space for per-context driver-private data,
use it for struct bnxt_rss_ctx. Inline bnxt_alloc_rss_ctx()
at this point, most of the init (as in the actions bnxt_del_one_rss_ctx()
will undo) is open coded in bnxt_create_rxfh_context(), anyway.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New RSS context API removes old contexts on netdev unregister.
No need to wipe them manually.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core will allocate IDs for the driver, from the range
[1, BNXT_MAX_ETH_RSS_CTX], no need to track the allocations.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new ethtool ops for RSS context management. The conversion
is pretty straightforward cut / paste of the right chunks of the
combined handler. Main change is that we let the core pick the IDs
(bitmap will be removed separately for ease of review), so we need
to tell the core when we lose a context.
Since the new API passes rxfh as const, change bnxt_modify_rss()
to also take const.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Contexts get deleted from FW when the device is down, but they
are kept in SW and re-added back on open. bnxt_set_rxfh_context()
apparently does not want to deal with complexity of dealing with
both the device down and device up cases. This is perhaps acceptable
for creating new contexts, but not being able to delete contexts
makes core-driven cleanups messy. Specifically with the new RSS
API core will try to delete contexts automatically after bringing
the device down.
Support the delete-while-down case. Skip the FW logic and delete
just the driver state.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt doesn't check if a ring is used by RSS contexts when reducing
ring count. Core performs a similar check for the drivers for
the main context, but core doesn't know about additional contexts,
so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring
id to index bp->rx_ring[], which without the check may end up
being out of bounds.
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Core does track the additional contexts in net-next, so we can
move this validation out of the driver as a follow up there.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240705020005.681746-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ethtool_ts_stats structure was introduced earlier this year. Now
it's time to support this group of counters in more drivers.
This patch adds support to bnxt driver.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240530204751.99636-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
