We can call ipu6_isys_queue_buf_ready() directly. The only current
usage is pin_ready pointer is to check if pin was prepared before
IPU6_FW_ISYS_RESP_TYPE_PIN_DATA_READY interrupt, we can use queue
pointer for that purpose.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
With current code base dev is only written but never read. Remove it
as redundant.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extract values needed by ipu6_queue_buf_ready() function from fw abi
structure. This will allow to reuse same buf ready code when fw abi
change.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove pointer for fw abi structure when setting frame sequence and
time, use timestamp value from the structure directly.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make function used only in one file static and remove from header file.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
End error message with new line.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
dma_ops is removed from the IPU6 auxiliary device, ISYS driver
should use the IPU6 DMA mapping APIs directly instead of depending
on the device callbacks.
ISYS driver switch from the videobuf2 DMA contig memory allocator to
scatter/gather memory allocator.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
[Sakari Ailus: Rebased on recent videobuf2 wait changes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZmHG8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGevkH/3YuG9YSP1eo93Da
eQAiwoOtxHsUWh9+2HQYrK5J1s7mCsf9+X2DtKZ3WJ4ZrtiYSvKPNwfG625JMgLb
aLKZFtu2fbijGuRyGM/9o6eZ7ZspZbVTcoCo4RAW1uTzsF8mpIFCp2gpGE7SiTfh
sdXkk3EX6DGrD0oZCu9A1uBBJ8MDB3tCQywnE7ny/X22pze6xCy7CZQWhk4EjOII
zZt8Lukhs1AjJrS9X0DXcFayQB7WB75mx7XvaiqepcXPGb0fUI2TZW5oTlGk9uXD
59KfjWe3Fn4Xp0Z83iLByjVuB+ZceZBD/1B24EqieQLVero3PLdh6B4XHKGKfDU+
C16bWqs=
=4UyN
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc3'
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CSI-2 sub-device streaming control should use {enable,disable}_streams pad
ops and not s_stream video ops as the sub-device supports streams. Fix
this by removing driver-implemented stream management and moving sensor
streaming control to the CSI-2 sub-device sub-driver.
Fixes: a11a5570a0 ("media: intel/ipu6: add IPU6 CSI2 receiver v4l2 sub-device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The buffer flags is set by wrong due to wrong parentheses, the
FL_INCOMING flag is never taken an account.
Fix it by wrapping the ternary conditional operation with parentheses.
Fixes: 3c1dfb5a69 ("media: intel/ipu6: input system video nodes and buffer queues")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use dev_dbg() for printing messages on user-triggerable conditions that
have no relation to driver or hardware issues.
Fixes: 3c1dfb5a69 ("media: intel/ipu6: input system video nodes and buffer queues")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some camera sensor can output the embedded data in specific data type.
This patch adds the support for metadata capture in IPU6 ISYS driver.
Signed-off-by: Hongju Wang <hongju.wang@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Register V4L2 video device and setup the VB2 queues to support video
capture. Video streaming callback will trigger the input system driver to
construct a input system stream configuration for firmware based on data
type and stream ID and then queue buffers to firmware to do capture.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
