Commit graph

90 commits

Author SHA1 Message Date
Niklas Söderlund
2946bac895 media: i2c: imx290: Remove unneeded assignment of subdev device pointer
The core helper v4l2_i2c_subdev_init() already assignees the subdevices
dev pointer to the device associated with the i2c client passed to it.
And 'imx290->dev' is assigned to '&client->dev' already in probe before
calling imx290_subdev_init().

Remove the duplicated open-coded assignment in the driver, there is no
reason to do it twice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-07-10 11:32:26 +02:00
Dave Stevenson
c699b6c7c8 media: i2c: imx290: Add configuration for IMX462
IMX462 is the successor to IMX290, and wants very minor
changes to the register setup.

Add the relevant configuration to support it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19 12:50:13 +01:00
Dave Stevenson
f2055c1d62 media: i2c: imx290: Register 0x3011 varies between imx327 and imx290
Reviewing the datasheets, register 0x3011 is meant to be 0x02 on imx327
and 0x00 on imx290.

Move it out of the common registers, and set it appropriately in the
sensor specific sections. (Included for imx290 to be explicit, rather
than relying on the default value).

Fixes: 2d41947ec2 ("media: i2c: imx290: Add support for imx327 variant")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19 12:50:13 +01:00
Dave Stevenson
ec75fd952b media: i2c: imx290: Limit analogue gain according to module
The imx327 only supports up to 29.4dB of analogue gain, vs
the imx290 going up to 30dB. Both are in 0.3dB steps.

As we now have model specific config, fix this mismatch,
and delete the comment referencing it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19 12:50:13 +01:00
Mauro Carvalho Chehab
5516200c46 Linux 6.12-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
 usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
 ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
 +kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
 xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
 sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
 7mx6XrM=
 =HYUx
 -----END PGP SIGNATURE-----

Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1

Linux 6.12-rc7

* tag 'v6.12-rc7': (1909 commits)
  Linux 6.12-rc7
  filemap: Fix bounds checking in filemap_read()
  i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
  mailmap: add entry for Thorsten Blum
  ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
  signal: restore the override_rlimit logic
  fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
  ucounts: fix counter leak in inc_rlimit_get_ucounts()
  selftests: hugetlb_dio: check for initial conditions to skip in the start
  mm: fix docs for the kernel parameter ``thp_anon=``
  mm/damon/core: avoid overflow in damon_feed_loop_next_input()
  mm/damon/core: handle zero schemes apply interval
  mm/damon/core: handle zero {aggregation,ops_update} intervals
  mm/mlock: set the correct prev on failure
  objpool: fix to make percpu slot allocation more robust
  mm/page_alloc: keep track of free highatomic
  bcachefs: Fix UAF in __promote_alloc() error path
  bcachefs: Change OPT_STR max to be 1 less than the size of choices array
  bcachefs: btree_cache.freeable list fixes
  bcachefs: check the invalid parameter for perf test
  ...
2024-11-11 12:16:33 +01:00
Tommaso Merciai
17971a430f media: i2c: Drop HAS_EVENTS and event handlers
v4l2_subdev_init_finalize() already sets the HAS_EVENTS flag if a
control handler is set, and subdev_do_ioctl() uses
v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe()
as defaults if the subdev doesn't have .(un)subscribe.
Let's drop the HAS_EVENTS flag and event handlers.

Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-11-07 09:05:57 +01:00
Benjamin Bara
9755343cb2 media: i2c: imx290: Check for availability in probe()
Currently, the V4L2 subdevice is also created when the device is not
available/connected. From userspace perspective, there is no visible
difference between a working and not-working subdevice (except when
trying it out).

This commit adds a simple preparation step, which includes an
availability check, before the subdev is initialized.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16 09:32:36 +02:00
Benjamin Bara
a92651b8e2 media: i2c: imx290: Avoid communication during probe()
As we don't know the mode during probe(), it doesn't make sense to
update the sensors' registers with assumptions. As imx290_set_ctrl(),
which is responsible for the happening communication, already ensures that
there is no communication with a suspended sensor, put the sensor to
suspend before calling it.

To clarify the dependency of the PM runtime to the link of the subdev
and the imx290 instance, put the block together.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16 09:32:36 +02:00
Benjamin Bara
856e89ff58 media: i2c: imx290: Remove CHIP_ID reg definition
This register is not described in the public available imx290 datasheet.
Additionally, a read returns '0x07d0' for an imx327lqr and also for an
imx462, which means it cannot be used to distinguish between those two
imx290 derivatives.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16 09:32:36 +02:00
Al Viro
5f60d5f6bb move asm/unaligned.h to linux/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02 17:23:23 -04:00
Alexander Stein
6fc62efa26 media: i2c: imx290: Fix IMX920 typo
Replace IMX920 by IMX290.

Fixes: b4ab57b07c ("media: i2c: imx290: Add crop selection targets support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-23 14:33:32 +01:00
Alexander Stein
60fc87a695 media: i2c: imx290: Properly encode registers as little-endian
The conversion to CCI also converted the multi-byte register access to
big-endian. Correct the register definition by using the correct
little-endian ones.

Fixes: af73323b97 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed the Fixes: tag.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-13 13:21:19 +01:00
Laurent Pinchart
5755be5f15 media: v4l2-subdev: Rename .init_cfg() operation to .init_state()
The subdev .init_cfg() operation is affected by two issues:

- It has long been extended to initialize a whole v4l2_subdev_state
  instead of just a v4l2_subdev_pad_config, but its name has stuck
  around.

- Despite operating on a whole subdev state and not being directly
  exposed to the subdev users (either in-kernel or through the userspace
  API), .init_cfg() is categorized as a subdev pad operation.

This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-04 10:37:47 +01:00
Sakari Ailus
bc0e8d91fe media: v4l: subdev: Switch to stream-aware state functions
Switch all drivers accessing sub-device state to use the stream-aware
functions. We will soon remove the old ones.

This patch has been generated using the following Coccinelle script:

---------8<------------
@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_pad_format(E1, E2, E3)
+ v4l2_subdev_state_get_format(E2, E3)

@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_pad_crop(E1, E2, E3)
+ v4l2_subdev_state_get_crop(E2, E3)

@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_pad_compose(E1, E2, E3)
+ v4l2_subdev_state_get_compose(E2, E3)

@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_try_format(E1, E2, E3)
+ v4l2_subdev_state_get_format(E2, E3)

@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_try_crop(E1, E2, E3)
+ v4l2_subdev_state_get_crop(E2, E3)

@@
expression E1, E2, E3;

@@

- v4l2_subdev_get_try_compose(E1, E2, E3)
+ v4l2_subdev_state_get_compose(E2, E3)
---------8<------------

Additionally drivers/media/i2c/s5k5baf.c and
drivers/media/platform/samsung/s3c-camif/camif-capture.c have been
manually changed as Coccinelle didn't. Further local variables have been
removed as they became unused as a result of the other changes.

Also Coccinelle introduced indentation by space in files
drivers/media/i2c/st-mipid02.c and
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also
corrected.

The diff from Coccinelle-generated changes are:

> diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c
> index e549692ff478..420984382173 100644
> --- b/drivers/media/i2c/imx319.c
> +++ a/drivers/media/i2c/imx319.c
> @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319,
>  				    struct v4l2_subdev_format *fmt)
>  {
>  	struct v4l2_mbus_framefmt *framefmt;
> -	struct v4l2_subdev *sd = &imx319->sd;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c
> index 96bdde685d65..e1b1d2fc79dd 100644
> --- b/drivers/media/i2c/imx355.c
> +++ a/drivers/media/i2c/imx355.c
> @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355,
>  				    struct v4l2_subdev_format *fmt)
>  {
>  	struct v4l2_mbus_framefmt *framefmt;
> -	struct v4l2_subdev *sd = &imx355->sd;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c
> index ca799bbcfdb7..abbb0b774d43 100644
> --- b/drivers/media/i2c/ov08x40.c
> +++ a/drivers/media/i2c/ov08x40.c
> @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x,
>  				     struct v4l2_subdev_format *fmt)
>  {
>  	struct v4l2_mbus_framefmt *framefmt;
> -	struct v4l2_subdev *sd = &ov08x->sd;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c
> index 7816d9787c61..09387e335d80 100644
> --- b/drivers/media/i2c/ov13858.c
> +++ a/drivers/media/i2c/ov13858.c
> @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858,
>  				     struct v4l2_subdev_format *fmt)
>  {
>  	struct v4l2_mbus_framefmt *framefmt;
> -	struct v4l2_subdev *sd = &ov13858->sd;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c
> index 268cd4b03f9c..c06411d5ee2b 100644
> --- b/drivers/media/i2c/ov13b10.c
> +++ a/drivers/media/i2c/ov13b10.c
> @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b,
>  				     struct v4l2_subdev_format *fmt)
>  {
>  	struct v4l2_mbus_framefmt *framefmt;
> -	struct v4l2_subdev *sd = &ov13b->sd;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> index 47605e36bc60..8f9b5713daf7 100644
> --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state,
>  				   struct v4l2_subdev_format *fmt,
>  				   const struct s5c73m3_frame_size **fs)
>  {
> -	struct v4l2_subdev *sd = &state->sensor_sd;
>  	u32 code;
>
>  	switch (fmt->pad) {
> diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
> index 67da2045f543..03ccfb0e1e11 100644
> --- a/drivers/media/i2c/s5k5baf.c
> +++ b/drivers/media/i2c/s5k5baf.c
> @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
>
>  	if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
>  		rects = (struct v4l2_rect * []) {
> -				&s5k5baf_cis_rect,
> -				v4l2_subdev_get_try_crop(sd, sd_state,
> -							 PAD_CIS),
> -				v4l2_subdev_get_try_compose(sd, sd_state,
> -							    PAD_CIS),
> -				v4l2_subdev_get_try_crop(sd, sd_state,
> -							 PAD_OUT)
> -			};
> +			&s5k5baf_cis_rect,
> +			v4l2_subdev_state_get_crop(sd_state, PAD_CIS),
> +			v4l2_subdev_state_get_compose(sd_state, PAD_CIS),
> +			v4l2_subdev_state_get_crop(sd_state, PAD_OUT)
> +		};
>  		s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
>  		return 0;
>  	}
> diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> index 295e083f38e8..be58260ea67e 100644
> --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
>  	struct v4l2_mbus_framefmt *mf = &fmt->format;
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> -		mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		mf = v4l2_subdev_state_get_format(sd_state, fmt->pad);
>  		fmt->format = *mf;
>  		return 0;
>  	}
> @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
>  	__camif_subdev_try_format(camif, mf, fmt->pad);
>
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> -		mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		mf = v4l2_subdev_state_get_format(sd_state, fmt->pad);
>  		*mf = fmt->format;
>  		mutex_unlock(&camif->lock);
>  		return 0;
> diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c
> index cea454ed9c20..61433744c6c4 100644
> --- b/drivers/media/platform/ti/cal/cal-camerarx.c
> +++ a/drivers/media/platform/ti/cal/cal-camerarx.c
> @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd,
>  					  struct v4l2_subdev_state *state,
>  					  struct v4l2_subdev_mbus_code_enum *code)
>  {
> -	struct cal_camerarx *phy = to_cal_camerarx(sd);
> -
>  	/* No transcoding, source and sink codes must match. */
>  	if (cal_rx_pad_is_source(code->pad)) {
>  		struct v4l2_mbus_framefmt *fmt;
> diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c
> index dd558fac6477..61d69f19657e 100644
> --- b/drivers/staging/media/imx/imx-ic-prp.c
> +++ a/drivers/staging/media/imx/imx-ic-prp.c
> @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt *
>  __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state,
>  	      unsigned int pad, enum v4l2_subdev_format_whence which)
>  {
> -	struct imx_ic_priv *ic_priv = priv->ic_priv;
> -
>  	if (which == V4L2_SUBDEV_FORMAT_TRY)
>  		return v4l2_subdev_state_get_format(sd_state, pad);
>  	else
> diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c
> index 02db7dbb884b..ec73c901079e 100644
> --- b/drivers/staging/media/imx/imx-ic-prpencvf.c
> +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c
> @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt *
>  __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state,
>  	      unsigned int pad, enum v4l2_subdev_format_whence which)
>  {
> -	struct imx_ic_priv *ic_priv = priv->ic_priv;
> -
>  	if (which == V4L2_SUBDEV_FORMAT_TRY)
>  		return v4l2_subdev_state_get_format(sd_state, pad);
>  	else
> diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
> index 9c9361354c00..b08a249b5fdd 100644
> --- a/drivers/media/i2c/st-mipid02.c
> +++ b/drivers/media/i2c/st-mipid02.c
> @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd,
>  		format->format = bridge->fmt;
>  	else
>  		format->format = *v4l2_subdev_state_get_format(sd_state,
> -						               MIPID02_SINK_0);
> +							       MIPID02_SINK_0);
>
>  	/* but code may need to be converted */
>  	format->format.code = serial_to_parallel_code(format->format.code);
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> index 117912d3bfbd..96353648c032 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp,
>  	rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val);
>
>  	src_fmt = v4l2_subdev_state_get_format(sd_state,
> -				               RKISP1_ISP_PAD_SOURCE_VIDEO);
> +					       RKISP1_ISP_PAD_SOURCE_VIDEO);
>  	src_info = rkisp1_mbus_info_get_by_code(src_fmt->code);
>
>  	if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER)
> @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp,
>  	sink_fmt = v4l2_subdev_state_get_format(sd_state,
>  						RKISP1_ISP_PAD_SINK_VIDEO);
>  	src_fmt = v4l2_subdev_state_get_format(sd_state,
> -				               RKISP1_ISP_PAD_SOURCE_VIDEO);
> +					       RKISP1_ISP_PAD_SOURCE_VIDEO);
>  	src_crop = v4l2_subdev_state_get_crop(sd_state,
> -				              RKISP1_ISP_PAD_SOURCE_VIDEO);
> +					      RKISP1_ISP_PAD_SOURCE_VIDEO);
>
>  	/*
>  	 * Media bus code. The ISP can operate in pass-through mode (Bayer in,

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-11-23 18:57:47 +01:00
Hans de Goede
af73323b97 media: imx290: Convert to new CCI register access helpers
Use the new comon CCI register access helpers to replace the private
register access helpers in the imx290 driver.

[Sakari Ailus: Squashed the patch to address a merge issue in Kconfig]

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-10 07:58:39 +02:00
Rob Herring
7c7e33b799 media: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-19 12:57:51 +02:00
Tommaso Merciai
9b4e0e7a57 media: i2c: imx290: drop format param from imx290_ctrl_update
The format param actually is not used in imx290_ctrl_update
function, let's drop this

Fixes: bc35f9a21a ("media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s")
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14 13:06:54 +02:00
Uwe Kleine-König
aaeb31c00e media: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:21 +02:00
Alexander Stein
d56f39f705 media: i2c: imx290: Add missing \n on dev_err_probe() message
Also dev_err_probe message require a trailing \n.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:02 +02:00
Alexander Stein
2d41947ec2 media: i2c: imx290: Add support for imx327 variant
Both sensors are quite similar. Their specs only differ regarding LVDS
and parallel output but are identical regarding MIPI-CSI-2 interface.
But they use a different init setting of hard-coded values, taken from
the datasheet.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:23:13 +01:00
Dave Stevenson
a3d4bba7dc media: i2c: imx290: Add the error code to logs in start_streaming
imx290_start_streaming logs what failed, but not the error
code from that function. Add it into the log message.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:22:19 +01:00
Dave Stevenson
924350ae03 media: i2c: imx290: Add support for H & V Flips
The sensor supports H & V flips, so add the relevant hooks for
V4L2_CID_HFLIP and V4L2_CID_VFLIP to configure them.

Note that the Bayer order is maintained as the readout area
shifts by 1 pixel in the appropriate direction (note the
comment about the top margin being 8 pixels whilst the bottom
margin is 9). The V4L2_SEL_TGT_CROP region is therefore
adjusted appropriately.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:21:18 +01:00
Dave Stevenson
ffbe3d8251 media: i2c: imx290: Add support for 74.25MHz external clock
The sensor supports either a 37.125 or 74.25MHz external, but
the driver only supported 37.125MHz.

Add the relevant register configuration for either clock
frequency option.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:20:42 +01:00
Dave Stevenson
044c2bfd00 media: i2c: imx290: Remove duplicated write to IMX290_CTRL_07
IMX290_CTRL_07 was written from both imx290_global_init_settings
and imx290_1080p_settings and imx290_720p_settings.

Remove it from imx290_global_init_settings as the setting varies
based on the mode.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:20:10 +01:00
Dave Stevenson
bdb55fb216 media: i2c: imx290: VMAX is mode dependent
The default VMAX for 60fps in 720p mode is 750 according to the
datasheet, however the driver always left it at 1125 thereby stopping
60fps being achieved.

Make VMAX (and therefore V4L2_CID_VBLANK) mode dependent so that 720p60
can be achieved.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:18:33 +01:00
Dave Stevenson
9fe4eee963 media: i2c: imx290: Convert V4L2_CID_VBLANK to read/write
The driver exposed V4L2_CID_VBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert to a read/write control so that the frame rate can be
controlled.
V4L2_CID_VBLANK also sets the limits for the exposure control,
therefore exposure ranges have to be updated when vblank changes
(either via s_ctrl, or via changing mode).

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:18:09 +01:00
Dave Stevenson
08a0061db7 media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write
The driver exposed V4L2_CID_HBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert to a read/write control so that the frame rate can be
controlled.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:17:36 +01:00
Dave Stevenson
d0347f9889 media: i2c: imx290: Use CSI timings as per datasheet
Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" added support for the increased link frequencies
on 2 data lanes, but didn't update the CSI timing registers in
accordance with the datasheet.

Use the specified settings.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:17:00 +01:00
Dave Stevenson
de39557748 media: i2c: imx290: Support 60fps in 2 lane operation
Commit "97589ad61c73 media: i2c: imx290: Add support for 2 data lanes"
added support for running in two lane mode (instead of 4), but
without changing the link frequency that resulted in a max of 30fps.

Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" then doubled the link frequency when in 2 lane mode,
but didn't undo the correction for running at only 30fps, just extending
horizontal blanking instead.

Remove the 30fps limit on 2 lane by correcting the register config
in accordance with the datasheet for 60fps operation over 2 lanes.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:14:36 +01:00
Dave Stevenson
bc35f9a21a media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
The datasheet lists the link frequency changes between
1080p and 720p modes. This is correct that the link frequency
changes as measured on an oscilloscope.

Link frequency is not necessarily the same as pixel rate.

The datasheet gives standard configurations for 1080p and 720p
modes at a number of frame rates.
Looking at the 1080p mode it gives:
HMAX = 0x898 = 2200
VMAX = 0x465 = 1125
2200 * 1125 * 60fps = 148.5MPix/s

Looking at the 720p mode it gives:
HMAX = 0xce4 = 3300
VMAX = 0x2ee = 750
3300 * 750 * 60fps = 148.5Mpix/s

This driver currently scales the pixel rate proportionally to the
link frequency, however the above shows that this is not the
correct thing to do, and currently all frame rate and exposure
calculations give incorrect results.

Correctly report the pixel rate as being 148.5MPix/s under any
mode.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 15:08:44 +01:00
Dave Stevenson
f539858741 media: i2c: imx290: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
Any V4L2 subdevice that implements controls and declares
V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS
and implement subscribe_event and unsubscribe_event hooks.

This driver didn't and would therefore fail v4l2-compliance
testing.

Add the relevant hooks.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 10:26:29 +01:00
Dave Stevenson
077d1b328d media: i2c: imx290: Set the colorspace fields in the format
The colorspace fields were left untouched in imx290_set_fmt
which lead to a v4l2-compliance failure.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 10:26:07 +01:00
Dave Stevenson
9a78e93721 media: i2c: imx290: Match kernel coding style on whitespace
Fix up a couple of coding style issues regarding missing blank
lines after declarations, double blank lines, and incorrect
indentation.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 10:05:38 +01:00
Dave Stevenson
8bb19dd7e1 media: i2c: imx290: Add support for the mono sensor variant
The IMX290 module is available as either mono or colour (Bayer).

Update the driver so that it can advertise the correct mono
formats instead of the colour ones.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 10:05:04 +01:00
Andy Shevchenko
32fceaa6b7 media: i2c: imx290: Use device_property_read_u32() directly
No need to call fwnode_property_read_u32(dev_fwnode()), when
we have already existing helper. So use it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 08:33:42 +01:00
Andy Shevchenko
44cedb7bed media: i2c: imx290: Make use of get_unaligned_le24(), put_unaligned_le24()
Since we have a proper endianness converters for LE 24-bit data use them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20 08:33:19 +01:00
Arnd Bergmann
b928db9404 media: i2c: imx290: fix conditional function definitions
The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper
that requires a __maybe_unused annotation to avoid a warning:

drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
static int imx290_runtime_resume(struct device *dev)
           ^
drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
static int imx290_runtime_suspend(struct device *dev)
           ^

Convert this to the new RUNTIME_PM_OPS() helper that so this
is not required. To improve this further, also use the pm_ptr()
helper that lets the dev_pm_ops get dropped entirely when
CONFIG_PM is disabled.

A related mistake happened in the of_match_ptr() macro here, which
like SET_RUNTIME_PM_OPS() requires the match table to be marked
as __maybe_unused, though I could not reproduce building this without
CONFIG_OF. Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.

Fixes: 02852c01f6 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-18 08:44:38 +01:00
Laurent Pinchart
05ef7ec49d media: i2c: imx290: Handle error from imx290_set_data_lanes()
Check the error status returned by imx290_set_data_lanes() in its
caller and propagate it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:06:11 +01:00
Laurent Pinchart
76c001287f media: i2c: imx290: Simplify imx290_set_data_lanes()
There's no need to check for an incorrect number of data lanes in
imx290_set_data_lanes() as the value is validated at probe() time. Drop
the check.

The PHY_LANE_NUM and CSI_LANE_MODE registers are programmed with a value
equal to the number of lanes minus one. Compute it instead of handling
it in the switch/case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:05:50 +01:00
Laurent Pinchart
7d399658f7 media: i2c: imx290: Configure data lanes at start time
There's no need to configure the data lanes in the runtime PM resume
handler. Do so in imx290_start_streaming() instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:05:22 +01:00
Laurent Pinchart
02852c01f6 media: i2c: imx290: Initialize runtime PM before subdev
Initializing the subdev before runtime PM means that no subdev
initialization can interact with the runtime PM framework. This can be
problematic when modifying controls, as the .s_ctrl() handler commonly
calls pm_runtime_get_if_in_use(). These code paths are not trivial,
making the driver fragile and possibly causing subtle bugs.

To make the subdev initialization more robust, initialize runtime PM
first.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:05:02 +01:00
Laurent Pinchart
a8c3e0c1bf media: i2c: imx290: Use runtime PM autosuspend
Use runtime PM autosuspend to avoid powering off the sensor during fast
stop-reconfigure-restart cycles. This also fixes runtime PM handling in
the probe function that didn't suspend the device, effectively leaving
it resumed forever.

While at it, improve documentation of power management in probe() and
remove().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:04:34 +01:00
Laurent Pinchart
10591fe636 media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt
The imx290_pixfmt structure contains information about formats,
currently limited to the bpp value. Extend it with the register settings
for each format, and rename it to imx290_format_info to make its purpose
clearer. Add a function named imx290_format_info() to look up format
info for a media bus code, and use it through the code. This allows
dropping the imx290 bpp field as the value is now looked up dynamically.

The error handling in imx290_setup_format() can also be dropped, as the
format is guaranteed by imx290_set_fmt() to be valid.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:04:06 +01:00
Laurent Pinchart
a2514b9a63 media: i2c: imx290: Use V4L2 subdev active state
Use the V4L2 subdev active state API to store the active format. This
simplifies the driver not only by dropping the imx290 current_format
field, but it also allows dropping the imx290 lock, replaced with the
state lock.

The lock check in imx290_ctrl_update() can be dropped as
imx290_set_fmt() can't be called anywmore with which set to ACTIVE
before controls are initialized.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:03:36 +01:00
Laurent Pinchart
e5d363ca82 media: i2c: imx290: Factor out clock initialization to separate function
Move the external clock initialization code from probe() to a separate
function to improve readability. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:02:58 +01:00
Laurent Pinchart
63127235be media: i2c: imx290: Use dev_err_probe()
Improve error handling in the probe() function with dev_err_probe().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:02:24 +01:00
Laurent Pinchart
6b69c52277 media: i2c: imx290: Factor out DT parsing to separate function
Make the probe() function more readable by factoring out the DT parsing
code to a separate function. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:02:00 +01:00
Laurent Pinchart
ee4ce89366 media: i2c: imx290: Factor out black level setting to a function
The black level programmed in the BLKLEVEL register depends on the
output format. The black level value computation is currently performed
in imx290_set_ctrl(), in addition to having different black level values
in the output-specific register value tables. Move it to a separate
function to simplify the imx290_set_ctrl() code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:01:23 +01:00
Laurent Pinchart
693b5cb598 media: i2c: imx290: Compute pixel rate and blanking in one place
The hblank, vblank, pixel rate and link frequency values and limits are
currently computed when creating controls, in imx290_ctrl_init(), and
updated in imx290_ctrl_update(). This duplicates the logic in different
places. Simplify the code by setting the control values and limits to
hardcoded values when creating the controls, and call
imx290_ctrl_update() to then update them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:00:57 +01:00
Laurent Pinchart
31b54a422b media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate()
Avoid accessing the imx290 current_format and current_mode fields in
imx290_calc_pixel_rate() to prepare for the removal of those fields.
Among the two callers of the function, imx290_ctrl_update() has an
explicit mode pointer already, and we can also give it a format pointer.
Use those explicitly.

While at it, inline the imx290_get_link_freq() function in
imx290_calc_pixel_rate() as it is only called there.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03 15:00:28 +01:00