Extend UVERBS_METHOD_REG_MR to get DMAH and pass it to all drivers.
It will be used in mlx5 driver as part of the next patch from the
series.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/2ae1e628c0675db81f092cc00d3ad6fbf6139405.1752752567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ed10435d35 ("RDMA/erdma: Implement hierarchical MTT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250630092346.81017-2-fourier.thomas@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The RDMA CM module might invoke erdma_create_ah() or erdma_destroy_ah()
in a non-sleepable context. Both of these functions will call the
erdma_post_cmd_wait(), which can potentially sleep and occasionally lead
to a hard lockup. Therefore, post the create_ah and destroy_ah commands in
polling mode if the RDMA_CREATE_AH_SLEEPABLE and RDMA_DESTROY_AH_SLEEPABLE
flags are not set, respectively.
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241226084141.74823-5-boshiyu@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Several scenarios require posting commands to the cmdq in a non-sleepable
context. For example, the cm_alloc_msg() might call erdma_create_ah()
while still holding a spinlock. So we add support for non-sleeping
erdma_post_cmd_wait().
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241226084141.74823-4-boshiyu@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The erdma_post_cmd_wait() function returns the cmdq response
only when both resp0 and resp1 are not NULL.
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241226084141.74823-3-boshiyu@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
In addition, remove dev->state as it is only used in erdma_query_port(),
and it can be replaced by ib_get_curr_port_state().
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The iWARP protocol supports only RC QPs previously. Now we add UD QPs
and UD WRs support for the RoCEv2 protocol.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-9-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Certian QP attributes, such as sq_draining, can only be obtained
by querying the hardware on the erdma RoCEv2 device. To address this,
we add the query_qp command to the cmdq and parse the response to
retrieve corresponding QP attributes.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-8-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The procedure for modifying QP is similar for both the iWARP and
RoCEv2 protocols. Therefore, we unify the code and provide the
erdma_modify_qp() interface for both protocols.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-7-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The QP state machines in the RoCEv2 and iWARP protocols are
different. To handle these differences for the erdma RoCEv2
device, we provide the erdma_modify_qp_rocev2() interface,
which transitions the QP state and modifies QP attributes
accordingly.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-6-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The address handle contains the necessary information to transmit
messages to a remote peer in the RoCEv2 protocol. This commit
implements the erdma_create_ah(), erdma_destroy_ah(), and
erdma_query_ah() interfaces, which are used to create, destroy,
and query an address handle, respectively.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-5-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The erdma_query_pkey() interface queries the PKey at the specified
index. Currently, erdma supports only one partition and returns the
default PKey for each query. Besides, the correct length of the PKey
table can be obtained by calling the erdma_query_port() and
erdma_get_port_immutable() interfaces.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-4-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The erdma_add_gid() interface inserts a GID entry at the
specified index. The erdma_del_gid() interface deletes the
GID entry at the specified index. Additionally, programs
can invoke the erdma_query_port() and erdma_get_port_immutable()
interfaces to query the GID table length.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-3-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the erdma driver supports both the iWARP and RoCEv2 protocols.
The erdma driver reads the ERDMA_REGS_DEV_PROTO_REG register to identify
the protocol used by the erdma device. Since each protocol requires
different ib_device_ops, we introduce the erdma_device_ops_iwarp and
erdma_device_ops_rocev2 for iWARP and RoCEv2 protocols, respectively.
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20241211020930.68833-2-boshiyu@linux.alibaba.com
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Changes the create_cq verb signature by sending the entire uverbs attr
bundle as a parameter. This allows drivers to send driver specific attrs
through ioctl for the create_cq verb and access them in their driver
specific code.
Also adds a new enum value for driver specific ioctl attributes for
methods already supporting UHW.
Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There exist two different names for the doorbell records: db_info and
db_record. We use dbrec for cpu address of the doorbell record and
dbrec_dma for dma address of the doorbell recordi uniformly.
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240311113821.22482-3-boshiyu@alibaba-inc.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the 8 byte doorbell record is allocated along with the queue
buffer, which may result in waste of dma space when the queue buffer is
page aligned. To address this issue, we introduce a dma pool named
db_pool and allocate doorbell record from it.
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240311113821.22482-2-boshiyu@alibaba-inc.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
First, we add a new command to query hardware statistics, and then
implement two functions: ib_device_ops.alloc_hw_port_stats and
ib_device_ops.get_hw_stats to allow rdma tool can get the statistics
of erdma device.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227084800.99091-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The erdma_create_scatter_mtt() function is supposed to return error
pointers. Returning NULL will lead to an Oops.
Fixes: ed10435d35 ("RDMA/erdma: Implement hierarchical MTT")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1eb400d5-d8a3-4a8e-b3da-c43c6c377f86@moroto.mountain
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Hierarchical MTT allows large MR registration without the need of
continuous physical address. This commit adds the support of hierarchical
MTT support for erdma.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230817102151.75964-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently our MTT only support inline mtt entries (0 level MTT) and
indirect MTT entries (1 level mtt), which will limit the maximum length
of MRs. In order to implement a multi-level MTT, we refactor the
structure of MTT first.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230817102151.75964-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, variable names and field names of struct erdma_mem contain
'mtt', which is not accurate. Renaming them with 'xxx_mem' or 'mem'.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230817102151.75964-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The original doorbell allocation mechanism is complex and does not meet
the isolation requirement. So we introduce a new doorbell mechanism and the
original mechanism (only be used with CAP_SYS_RAWIO if hardware does not
support the new mechanism) needs to be kept as simple as possible for
compatibility.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-5-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For the isolation requirement, each QP/CQ can only issue doorbells from the
allocated mmio space. Configure the relationship between QPs/CQs and
mmio doorbell spaces to hardware in create_qp/create_cq interfaces.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Each ucontext will try to allocate doorbell resources in the extended bar
space from hardware. For compatibility, we change nothing for the original
bar space, and it will be used only for applications with CAP_SYS_RAWIO
authority in the older HW/FW environments.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Hardware's page size is 4096, but the kernel's page size may vary. Driver
should use hardware's page size when communicating with hardware.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/r/20230307102924.70577-2-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rdma_user_mmap_entry_get() take reference, we should release it when not
need anymore, add the missing rdma_user_mmap_entry_put() in the error
path to fix it.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221220121139.1540564-1-linmq006@gmail.com
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce "capacity flags" field at where hardware put all zeros originally
in "query device" response. Using this field, hardware can report atomic
feature if supports.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221107021845.44598-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To support atomic operations, IB_ACCESS_REMOTE_ATOMIC right should be
passed to hardware for permission check. Since "access mode" field in FRMR
SQE and RegMr command is never used by hw, we remove the "access mode"
field, so that we can then have enough space to extend access fields.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221107021845.44598-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Many of erdma's includes are redundant, because they are already included
indirectly by kernel headers or custom headers. So we remove all the
unnecessary direct-includes. Besides, add linux/pci.h to erdma.h because
it's also used in the file.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220909093822.33868-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
erdma_post_cmd_wait does not use the 'u64 *req' input parameter directly.
So it is better to define it to 'void *req', and by this we can eliminate
the casting when calling erdma_post_cmd_wait.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220909093822.33868-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
QP0 in HW is used for CMDQ, and the rest is for RDMA QPs. So the actual
max_qp capacity reported to core should be max_qp (reported by HW) - 1.
So does max_cq.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/all/20220810014320.88026-1-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The RDMA verbs implementation of erdma is divided into three files:
erdma_qp.c, erdma_cq.c, and erdma_verbs.c. Internal used functions and
datapath functions of QP/CQ are put in erdma_qp.c and erdma_cq.c, the rest
is in erdma_verbs.c.
This commit also fixes some static check warnings.
Link: https://lore.kernel.org/r/20220727014927.76564-8-chengyou@linux.alibaba.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
