Extend UVERBS_METHOD_REG_MR to get DMAH and pass it to all drivers.
It will be used in mlx5 driver as part of the next patch from the
series.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/2ae1e628c0675db81f092cc00d3ad6fbf6139405.1752752567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since both "length" and "offset" are of type u32, there is
no functional issue here.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250704043857.19158-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove nq variable from bnxt_re_create_srq() and bnxt_re_destroy_srq()
as it generates the following compilation warnings:
>> drivers/infiniband/hw/bnxt_re/ib_verbs.c:1777:24: warning: variable
'nq' set but not used [-Wunused-but-set-variable]
1777 | struct bnxt_qplib_nq *nq = NULL;
| ^
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1828:24: warning: variable
'nq' set but not used [-Wunused-but-set-variable]
1828 | struct bnxt_qplib_nq *nq = NULL;
| ^
2 warnings generated.
Fixes: 6b395d3114 ("RDMA/bnxt_re: Fix budget handling of notification queue")
Link: https://patch.msgid.link/r/8a4343e217d7d1c0a5a786b785c4ac57cb72a2a0.1744288299.git.leonro@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504091055.CzgXnk4C-lkp@intel.com/
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cited commit in Fixes tag introduced a bug which can cause hang
of completion queue processing because of notification queue budget
goes to zero.
Found while doing nfs over rdma mount and umount.
Below message is noticed because of the existing bug.
kernel: cm_destroy_id_wait_timeout: cm_id=00000000ff6c6cc6 timed out. state 11 -> 0, refcnt=1
Fix to handle this issue -
Driver will not change nq->budget upon create and destroy of cq and srq
rdma resources.
Fixes: cb97b377a1 ("RDMA/bnxt_re: Refurbish CQ to NQ hash calculation")
Link: https://patch.msgid.link/r/20250324040935.90182-1-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5,
vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting in-kernel
verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to
access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+ap4gAKCRCFwuHvBreF
YaFHAP9wyeZCZIbnWaGcbNdbsmkEgy7aTVILRHf1NA7VSJ211gD9Ha60E+mkwtvA
i7IJ49R2BdqzKaO9oTutj2Lw+8rABwQ=
=qXhh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
Add support for process_mad hook to retrieve the perf management counters.
Supports IB_PMA_PORT_COUNTERS and IB_PMA_PORT_COUNTERS_EXT counters.
Query the data from HW contexts and FW commands.
Signed-off-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741855464-27921-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp, efa,
cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them to
drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ5JkNAAKCRCFwuHvBreF
YeCwAP9nrzFZMBEa0DVx7V8w3sotQCOzaaoi+4UOigeleppKSAD+K7QA5CIwNf7j
x0apvJlNsXKSYJVUI2rch/qIL8ckQwM=
=wIYu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
In order to optimize the size of driver private structure,
the memory for dev_attr is allocated dynamically during the
chip context initialization. In order to make certain runtime
decisions, store dev_attr in the qplib_res structure.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1736446693-6692-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the error handling path of bnxt_re_mmap(), driver should invoke
rdma_user_mmap_entry_put() to free the reference of mmap entry in case
the error happens after rdma_user_mmap_entry_get was called.
Fixes: ea22248578 ("RDMA/bnxt_re: Update alloc_page uapi for pacing")
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20250104061519.2540178-1-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver currently populates subsystem_device id in the
"hw_ver" field of ib_attr structure in query_device.
Updated to populate PCI revision ID.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Current driver implementation doesn't populate the port_num
field in query_qp. Adding the code to convert internal firmware
port id to ibv defined port number and export it.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When RDMA app configures path MTU, add a check in modify_qp verb
to make sure that it doesn't go beyond interface MTU. If this
check fails, driver will fail the modify_qp verb.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need to include bnxt_ulp.h in ib_verbs.c.
Remove it. Also, fixed hw_counters.c to remove unwanted
header file inclusions.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1733888745-30939-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Change bnxt_re_destroy_qp to always return 0 and don't fail
in case of error during destroy.
In addition, delete debugfs QP to earlier stage.
Fixes: d7d54769c0 ("RDMA/bnxt_re: Add debugfs hook in the driver")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The workaround to modify the UD QP from RTS to RTS is required
only for older adapters. Issuing this for latest adapters can caus
some unexpected behavior. Fix it
Fixes: 1801d87b35 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes, CQ
coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZz4ENwAKCRCFwuHvBreF
YQYQAP9R54r5J1Iylg+zqhCc+e/9oveuuZbfLvy/EJiEpmdprQEAgPs1RrB0z7U6
1xrVStUKNPhGd5XeVVZGkIV0zYv6Tw4=
=V5xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
Adding support for different traffic class passed
to driver. Fix the traffic class setting in modify_qp
by skipping the ECN bits. Pass the service level received
from applications to the firmware.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There are few use cases where CQ create and destroy
is seen before re-creating the CQ, this kind of use
case is disturbing the RR distribution and all the
active CQ getting mapped to only 2 NQ alternatively.
Fixing the CQ to NQ hash calculation by implementing
a quick load sorting mechanism under a mutex.
Using this, if the CQ was allocated and destroyed
before using it, the nq selecting algorithm still
obtains the least loaded CQ. Thus balancing the load
on NQs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/1731577748-1804-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move NQ related data structures from rdev to a new structure
named "struct bnxt_re_nq_record" by keeping a pointer to in
the rdev structure. Allocate the memory for it dynamically.
This change is needed for subsequent patches in the series.
Also, removed the nq_task variable from rdev structure as it
is redundant and no longer used.
This change would help to reduce the size of the driver private
structure as well.
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731577748-1804-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adding support for a per device debugfs folder for exporting
some of the device specific debug information.
Added support to get QP info for now. The same folder can be
used to export other debug features in future.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Access flag definition in MR and QP is different
in FW. Currently both reg/bind MR and modify/query QP uses
the same flags. Add a different function to map
the QP access flags for newer adapters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RoCE message rate performance is heavily degraded
without the use of cq coalescing. With proper coalescing,
message rates get better. Furthermore, coalescing
significantly reduces contention on the PCIe Root
Complex/Memory subsystems.
Add the changes to configure CQ rx colascing parameters
based on adapter revision when CQ is created.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When variable size WQE is supported, max_qp_sges reported
is more than 6. For devices that supports variable size WQE,
the Send WQE size calculation is wrong when an an older library
that doesn't support variable size WQE is used.
Set the WQE size to 128 when static WQE is supported.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725444253-13221-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For older adapters that doesn't support variable size WQE,
driver is wrongly reporting that variable WQE is supported,
when the latest library is used.
Report the variable WQE capability only if the driver supports
it.
Fixes: 10a104c0de ("RDMA/bnxt_re: Enable variable size WQEs for user space applications")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725444253-13221-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some of the adapters support Relaxed Ordering for the MRs.
Driver queries support for Memory region relax ordering support from
firmware and set relax ordering bit in REGISTER_MR request, if the users
request for the support. Also, this is supported only if the PCIe device
has enabled relaxed ordering attribute.
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vijay Kumar Mandadapu <vijaykumar.mandadapu@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Firmware now have a new mr registration command where
both MR allocation and registration can be done in a
single hwrm command. Driver has to issue this new hwrm
command whenever the support flag is set. This reduces
the number of hwrm issued per MR creation and speed up
the MR creation.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info to arm the SRQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the SRQ structure from the SRQ ID.
SRQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per SRQ. This
can be optimized to enable multiple SRQs from the same
application share the same page and different offsets
in the page
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Refactor the code in this function to have common code.
This is used in subsequent patches.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Selvin Xavier says:
=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============
Based on v6.11-rc5 for dependencies.
* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add backward compatibility code to enable variable size WQEs only if the
user lib supports it.
Link: https://patch.msgid.link/r/1724042847-1481-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
User library calculates the number of slots required for user applications
and it can pass that information to the driver. Driver can use this value
and update the HW directly. This mechanism is currently used only for the
newly introduced variable size WQEs.
Extend the bnxt_re_qp_req structure to pass the Send Queue slot count.
Reorganize the code to get the sq_slots before initializing the Send Queue
attributes.
Link: https://patch.msgid.link/r/1724042847-1481-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW MSN table size is always a power of 2. So the pages should be mapped
accordingly.
Use the power of two calculation while get the number of PSN/MSN entries.
Fixes: 6f6bfbc595 ("RDMA/bnxt_re: Expose the MSN table capability for user library")
Link: https://patch.msgid.link/r/1724042847-1481-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Variable size WQE means that each send Work Queue Entry to HW can use
different WQE sizes as opposed to the static WQE size on the current
devices. Set variable WQE mode for Gen P7 devices. Depth of the Queue will
be a multiple of slot which is 16 bytes. The number of slots should be a
multiple of 256 as per the HW requirement.
Initialize the Software shadow queue to hold requests equal to the number
of slots. Also, do not expose the variable size WQE capability until the
last patch in the series.
Link: https://patch.msgid.link/r/1724042847-1481-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' API instead of
udata.
This enables passing some new ioctl attributes to the drivers, as will
be introduced in the next patches for mlx5 driver.
Change the involved drivers accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/9a25b2fc02443f7c36c2d93499ae25252b6afd40.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When map a device between servers with MLX and BCM RoCE nics, RTRS
server complain about unknown imm type, and can't map the device,
After more debug, it seems bnxt_re wrongly handle the
imm_data, this patch fixed the compat issue with MLX for us.
In off list discussion, Selvin confirmed HW is working in little endian format
and all data needs to be converted to LE while providing.
This patch fix the endianness for imm_data
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Changes the create_cq verb signature by sending the entire uverbs attr
bundle as a parameter. This allows drivers to send driver specific attrs
through ioctl for the create_cq verb and access them in their driver
specific code.
Also adds a new enum value for driver specific ioctl attributes for
methods already supporting UHW.
Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED was introduced to share the HW
retransmit capability between driver and lib. The main difference in
implementation for HW Retransmit support is the usage of MSN table or
PSN table . When HW retrans is enabled, HW expects MSN table to be
allocated by driver/lib, else PSN table (for older adapters).
FW expose a new field which gives MSN capability. Drivers and libs can
depend on the new field instead of HW Retrasns capability. For
adapters which support HW_RETX feature, MSN table capability will be
set. For older adapters, this value will be 0(to maintain backward
compatibility with older FW).
Rename UAPI just to capture the correct name of the HW capability
that driver/library is interested in. No functional impact even if
older rdma-core is used.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SRQ resize is not supported in the driver. But driver is not
returning error from bnxt_re_modify_srq() for SRQ resize.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Limit the usage of fence MR to adapters older than Gen P5 products.
Fixes: 1801d87b35 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Return -ENOMEM if get_zeroed_page() fails. Don't return success.
Fixes: e275919d96 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://lore.kernel.org/r/d714306e-b7d7-4e89-b973-a9ff0f260c78@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters require to share a toggle value for CQ
and SRQ. This is received by the driver as part of
interrupt notifications and needs to be shared with the
user space. Add a new UAPI infrastructure to get the
shared page for CQ and SRQ.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add basic support for 5760X P7 devices. Add new chip
revisions. The first version support is similar to
the existing P5 adapters. Extend the current support
for P5 adapters to P7 also.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1701946060-13931-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rounding up the queue depth to power of two is not a hardware requirement.
In order to optimize the per connection memory usage, removing drivers
implementation which round up to the queue depths to the power of 2.
Implements a mask to maintain backward compatibility with older
library.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1698069803-1787-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
