mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
1072 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
||
|
Paolo Bonzini
|
f02b1bcc73 |
Merge tag 'kvm-x86-irqs-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM IRQ changes for 6.17 - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c. - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibited AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Dedup x86's device posted IRQ code, as the vast majority of functionality can be shared verbatime between SVM and VMX. - Harden the device posted IRQ code against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - Generate GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. |
||
|
Linus Torvalds
|
953e117bf4 |
A missing bit of 66635b0776 ("assorted variants of irqfd setup:
convert to CLASS(fd)") a year ago - mshv_eventfd would've been
covered by that, but it had forked slightly before that series
and got merged into mainline later.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRNHgAKCRBZ7Krx/gZQ
66NpAQCqVYE230nARjNQmpjVyJ8L+ncRHNzWpaFwA9f2LMzYEwD+OTkNvpqtyLQb
qMo71qocHKdfL3euO647Swp20cOgigc=
=XO4e
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull CLASS(fd) update from Al Viro:
"A missing bit of commit
|
||
|
Al Viro
|
ce23f29e7d |
mshv_eventfd: convert to CLASS(fd)
similar to
|
||
|
Nuno Das Neves
|
36c46e64c5 |
Drivers: hv: Use nested hypercall for post message and signal event
When running nested, these hypercalls must be sent to the L0 hypervisor or VMBus will fail. Remove hv_do_nested_hypercall() and hv_do_fast_nested_hypercall8() altogether and open-code these cases, since there are only 2 and all they do is add the nested bit. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Naman Jain
|
2b206d3468 |
Drivers: hv: Fix warnings for missing export.h header inclusion
Fix below warning in Hyper-V drivers that comes when kernel is compiled with W=1 option. Include export.h in driver files to fix it. * warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20250611100459.92900-2-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250611100459.92900-2-namjain@linux.microsoft.com> |
||
|
Naman Jain
|
b0871aa0f8 |
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
__is_defined(HYPERVISOR_CALLBACK_VECTOR) would return 1, only if
HYPERVISOR_CALLBACK_VECTOR macro is defined as 1. However its value is
0xf3 and this leads to __is_defined() returning 0. The expectation
was to just check whether this MACRO is defined or not and get 1 if
it's defined. Replace __is_defined with #ifdef blocks instead to
fix it.
Fixes:
|
||
|
Michael Kelley
|
7b89a44b2e |
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
Commit |
||
|
Sean Christopherson
|
867347bb21 |
sched/wait: Drop WQ_FLAG_EXCLUSIVE from add_wait_queue_priority()
Drop the setting of WQ_FLAG_EXCLUSIVE from add_wait_queue_priority() and instead have callers manually add the flag prior to adding their structure to the queue. Blindly setting WQ_FLAG_EXCLUSIVE is flawed, as the nature of exclusive, priority waiters means that only the first waiter added will ever receive notifications. Pushing the flawed behavior to callers will allow fixing the problem one hypervisor at a time (KVM added the flawed API, and then KVM's code was copy+pasted nearly verbatim by Xen and Hyper-V), and will also allow for adding an API that provides true exclusivity, i.e. that guarantees at most one priority waiter is in the queue. Opportunistically add a comment in Hyper-V to call out the mess. Xen privcmd's irqfd_wakefup() doesn't actually operate in exclusive mode, i.e. can be "fixed" simply by dropping WQ_FLAG_EXCLUSIVE. And KVM is primed to switch to the aforementioned fully exclusive API, i.e. won't be carrying the flawed code for long. No functional change intended. Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20250522235223.3178519-7-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
c00b285024 |
hyperv-next for v6.16
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmg+jmETHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXiWaCACjYSQcCXW2nnZuWUnGMJq8HD5XGBAH tNYzOyp2Y4bXEJzfmbHv8UpJynGr3IFKybCnhm0uAQZCmiR5k4CfMvjPQXcJu9LK 7yUI/dTGrRGG7f3NClWK2vXg7ATqzRGiPuPDk2lDcP04aQQWaUMDYe5SXIgcqKyZ cm2OVHapHGbQ7wA+xXGQcUBb6VJ5+BrQUVOqaEQyl4LURvjaQcn7rVDS0SmEi8gq 42+KDVd8uWYos5dT57HIq9UI5og3PeTvAvHsx26eX8JWNqwXLgvxRH83kstK+GWY uG3sOm5yRbJvErLpJHnyBOlXDFNw2EBeLC1VyhdJXBR8RabgI+H/mrY3 =4bTC -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel) - Fixes for Hyper-V UIO driver (Long Li) - Fixes for Hyper-V PCI driver (Michael Kelley) - Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley) - Documentation updates for Hyper-V VMBus (Michael Kelley) - Enhance logging for hv_kvp_daemon (Shradha Gupta) * tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits) Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir Documentation: hyperv: Update VMBus doc with new features and info PCI: hv: Remove unnecessary flex array in struct pci_packet Drivers: hv: Remove hv_alloc/free_* helpers Drivers: hv: Use kzalloc for panic page allocation uio_hv_generic: Align ring size to system page uio_hv_generic: Use correct size for interrupt and monitor pages Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary arch/x86: Provide the CPU number in the wakeup AP callback x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap() PCI: hv: Get vPCI MSI IRQ domain from DeviceTree ACPI: irq: Introduce acpi_get_gsi_dispatcher() Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device() Drivers: hv: vmbus: Get the IRQ number from DeviceTree dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties arm64, x86: hyperv: Report the VTL the system boots in arm64: hyperv: Initialize the Virtual Trust Level field Drivers: hv: Provide arch-neutral implementation of get_vtl() Drivers: hv: Enable VTL mode for arm64 ... |
||
|
Linus Torvalds
|
9d230d500b |
Driver core changes for 6.16-rc1
Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the summary
of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes. This churn should now be
completed for those types of attributes
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaDbe+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYbACgl/MngU9pRnx5jZIQh6bWveFSeo8AnRE4U5x0
X+lgTPjGKL1RrV3C5HJp
=+0BA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Greg KH:
"Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the
summary of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes.
The final churn of switching away from and removing the
transitional struct members, "read_new", "write_new" and
"bin_attrs_new" will come after the merge window to avoid
unnecesary merge conflicts.
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
kernfs: Relax constraint in draining guard
Documentation: embargoed-hardware-issues.rst: Remove myself
drivers: hv: fix up const issue with vmbus_chan_bin_attrs
firmware_loader: use SHA-256 library API instead of crypto_shash API
docs: debugfs: do not recommend debugfs_remove_recursive
PM: wakeup: Do not expose 4 device wakeup source APIs
kernfs: switch global kernfs_rename_lock to per-fs lock
kernfs: switch global kernfs_idr_lock to per-fs lock
driver core: auxiliary bus: Fix IS_ERR() vs NULL mixup in __devm_auxiliary_device_create()
sysfs: constify attribute_group::bin_attrs
sysfs: constify bin_attribute argument of bin_attribute::read/write()
software node: Correct a OOB check in software_node_get_reference_args()
devres: simplify devm_kstrdup() using devm_kmemdup()
platform: replace magic number with macro PLATFORM_DEVID_NONE
component: do not try to unbind unbound components
driver core: auxiliary bus: add device creation helpers
driver core: faux: Add sysfs groups after probing
|
||
|
Michael Kelley
|
96959283a5 |
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
The Hyper-V host provides guest VMs with a range of MMIO addresses that guest VMBus drivers can use. The VMBus driver in Linux manages that MMIO space, and allocates portions to drivers upon request. As part of managing that MMIO space in a Generation 2 VM, the VMBus driver must reserve the portion of the MMIO space that Hyper-V has designated for the synthetic frame buffer, and not allocate this space to VMBus drivers other than graphics framebuffer drivers. The synthetic frame buffer MMIO area is described by the screen_info data structure that is passed to the Linux kernel at boot time, so the VMBus driver must access screen_info for Generation 2 VMs. (In Generation 1 VMs, the framebuffer MMIO space is communicated to the guest via a PCI pseudo-device, and access to screen_info is not needed.) In commit |
||
|
Michael Kelley
|
e89f91222a |
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
The VMBus driver code has some inherent races in the creation of the "channels" sysfs subdirectory and its per-channel numbered subdirectories. These races have not generally been recognized or understood. Add some comments to call them out. No code changes. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250514225508.52629-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250514225508.52629-1-mhklinux@outlook.com> |
||
|
Long Li
|
cd1769e1fe |
Drivers: hv: Remove hv_alloc/free_* helpers
There are no users for those functions, remove them. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1746492997-4599-6-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1746492997-4599-6-git-send-email-longli@linuxonhyperv.com> |
||
|
Long Li
|
a60822bc11 |
Drivers: hv: Use kzalloc for panic page allocation
To prepare for removal of hv_alloc_* and hv_free* functions, use kzalloc/kfree directly for panic reporting page. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1746492997-4599-5-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1746492997-4599-5-git-send-email-longli@linuxonhyperv.com> |
||
|
Long Li
|
09eea7ad0b |
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
There are use cases that interrupt and monitor pages are mapped to
user-mode through UIO, so they need to be system page aligned. Some
Hyper-V allocation APIs introduced earlier broke those requirements.
Fix this by using page allocation functions directly for interrupt
and monitor pages.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Roman Kisel
|
18a34bb522 |
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
The ARM64 PCI code for hyperv needs to know the VMBus root device, and it is private. Provide a function that returns it. Rename it from "hv_dev" as "hv_dev" as a symbol is very overloaded. No functional changes. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-10-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-10-romank@linux.microsoft.com> |
||
|
Roman Kisel
|
1dc5df133b |
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
The VMBus driver uses ACPI for interrupt assignment on arm64 hence it won't function in the VTL mode where only DeviceTree can be used. Update the VMBus driver to discover interrupt configuration from DT. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-9-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-9-romank@linux.microsoft.com> |
||
|
Roman Kisel
|
e7e6902fbd |
Drivers: hv: Provide arch-neutral implementation of get_vtl()
To run in the VTL mode, Hyper-V drivers have to know what VTL the system boots in, and the arm64/hyperv code does not have the means to compute that. Refactor the code to hoist the function that detects VTL, make it arch-neutral to be able to employ it to get the VTL on arm64. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/20250428210742.435282-5-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-5-romank@linux.microsoft.com> |
||
|
Roman Kisel
|
f41ceff174 |
Drivers: hv: Enable VTL mode for arm64
Kconfig dependencies for arm64 guests on Hyper-V require that be ACPI enabled, and limit VTL mode to x86/x64. To enable VTL mode on arm64 as well, update the dependencies. Since VTL mode requires DeviceTree instead of ACPI, don’t require arm64 guests on Hyper-V to have ACPI unconditionally. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-4-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-4-romank@linux.microsoft.com> |
||
|
Greg Kroah-Hartman
|
ec18d5c41e |
drivers: hv: fix up const issue with vmbus_chan_bin_attrs
In commit |
||
|
Linus Torvalds
|
ef935650e0 |
Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing
too alarming, I suspect those will continue for another release.
Other than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error "nvsp_rndis_pkt_complete error status: 2"
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UUcH
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
||
|
Michael Kelley
|
45a442fe36 |
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc() instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining callers. Remove it. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Michael Kelley
|
380b75d307 |
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver and is hardcoded to create a single GPA range. To allow it to also be used by the netvsc driver to create multiple GPA ranges, no longer hardcode as having a single GPA range. Allow the calling driver to specify the rangecount in the supplied descriptor. Update the storvsc driver to reflect this new approach. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
914a1fe5f8 |
Char/Misc/IIO driver fixes for 6.15-rc6
Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaB9YVQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynaIwCfTPZseJ558irNFrethcxPqtAAlc0An3z4Jyij
diV9XrxG+Afasvqviyi/
=sjUN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
||
|
Naman Jain
|
65995e97a1 |
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
The ring buffer size varies across VMBus channels. The size of sysfs node for the ring buffer is currently hardcoded to 4 MB. Userspace clients either use fstat() or hardcode this size for doing mmap(). To address this, make the sysfs node size dynamic to reflect the actual ring buffer size for each channel. This will ensure that fstat() on ring sysfs node always returns the correct size of ring buffer. Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Link: https://lore.kernel.org/r/20250502074811.2022-3-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Naman Jain
|
f31fe8165d |
uio_hv_generic: Fix sysfs creation path for ring buffer
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes:
|
||
|
Michael Kelley
|
14ae3003e7 |
Drivers: hv: Fix bad ref to hv_synic_eventring_tail when CPU goes offline
When a CPU goes offline, hv_common_cpu_die() frees the
hv_synic_eventring_tail memory for the CPU. But in a normal VM (i.e., not
running in the root partition) the per-CPU memory has not been allocated,
resulting in a bad memory reference and oops when computing the argument
to kfree().
Fix this by freeing the memory only when running in the root partition.
Fixes:
|
||
|
Nuno Das Neves
|
261ffd53cc |
Drivers: hv: Fix bad pointer dereference in hv_get_partition_id
'output' is already a pointer to the output argument, it should be
passed directly to hv_do_hypercall() without the '&' operator.
Fixes:
|
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
a5b3d8660b |
hyperv-next for 6.15
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmfhlLATHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXgchCADOz33rSm4G4w4r0qT05dTDi/lZkEdK 64dQq322XXP/C9FfR66d30243gsAmuM5a0SvzFHLXAOu6yqM270Xehd/Rud+Um2s lSVnc0Ux0AWBgksqFd0t577aN7zmJEukosEYO5lBNop+zOcadrm3S6Th/AoL2h/D yphPkhH13bsCK+Wll/eBOQLIhC9iA0konYbBLuEQ5MqvUbrzc6Rmb5gxsHHZKOqg vLjkrYR/d3s2gIpKxiFp0RwvzGyffZEHxvU/YF3hTenPMlTlnXWbyspBSTVmWggP 13IFLzqxDdW9RgUnGB4xRc424AC1LKqEr42QPQE7zGvl2jdJriA2Q1LT =BXqj -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Add support for running as the root partition in Hyper-V (Microsoft Hypervisor) by exposing /dev/mshv (Nuno and various people) - Add support for CPU offlining in Hyper-V (Hamza Mahfooz) - Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael Kelley, Thorsten Blum) * tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: fix an indentation issue in mshyperv.h x86/hyperv: Add comments about hv_vpset and var size hypercall input args Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs hyperv: Add definitions for root partition driver to hv headers x86: hyperv: Add mshv_handler() irq handler and setup function Drivers: hv: Introduce per-cpu event ring tail Drivers: hv: Export some functions for use by root partition module acpi: numa: Export node_to_pxm() hyperv: Introduce hv_recommend_using_aeoi() arm64/hyperv: Add some missing functions to arm64 x86/mshyperv: Add support for extended Hyper-V features hyperv: Log hypercall status codes as strings x86/hyperv: Fix check of return value from snp_set_vmsa() x86/hyperv: Add VTL mode callback for restarting the system x86/hyperv: Add VTL mode emergency restart callback hyperv: Remove unused union and structs hyperv: Add CONFIG_MSHV_ROOT to gate root partition support hyperv: Change hv_root_partition into a function hyperv: Convert hypercall statuses to linux error codes drivers/hv: add CPU offlining support ... |
||
|
Nico Pache
|
02ec35963b |
hv_balloon: update the NR_BALLOON_PAGES state
Update the NR_BALLOON_PAGES counter when pages are added to or removed from the Hyper-V balloon. Link: https://lkml.kernel.org/r/20250314213757.244258-4-npache@redhat.com Signed-off-by: Nico Pache <npache@redhat.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Cc: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: David Hildenbrand <david@redhat.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Juegren Gross <jgross@suse.com> Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Wei Liu <wei.liu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Nuno Das Neves
|
621191d709 |
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
e2575ffe57 |
x86: hyperv: Add mshv_handler() irq handler and setup function
Add mshv_handler() to process messages related to managing guest partitions such as intercepts, doorbells, and scheduling messages. In a (non-nested) root partition, the same interrupt vector is shared between the vmbus and mshv_root drivers. Introduce a stub for mshv_handler() and call it in sysvec_hyperv_callback alongside vmbus_handler(). Even though both handlers will be called for every Hyper-V interrupt, the messages for each driver are delivered to different offsets within the SYNIC message page, so they won't step on each other. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
04df7ac399 |
Drivers: hv: Introduce per-cpu event ring tail
Add a pointer hv_synic_eventring_tail to track the tail pointer for the SynIC event ring buffer for each SINT. This will be used by the mshv driver, but must be tracked independently since the driver module could be removed and re-inserted. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
21050f6197 |
Drivers: hv: Export some functions for use by root partition module
hv_get_hypervisor_version(), hv_call_deposit_pages(), and hv_call_create_vp(), are all needed in-module with CONFIG_MSHV_ROOT=m. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@microsoft.linux.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
af37bc759f |
hyperv: Introduce hv_recommend_using_aeoi()
Factor out the check for enabling auto eoi, to be reused in root partition code. No functional changes. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
3817854ba8 |
hyperv: Log hypercall status codes as strings
Introduce hv_status_printk() macros as a convenience to log hypercall errors, formatting them with the status code (HV_STATUS_*) as a raw hex value and also as a string, which saves some time while debugging. Create a table of HV_STATUS_ codes with strings and mapped errnos, and use it for hv_result_to_string() and hv_result_to_errno(). Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and irqdomain.c hypercalls to aid debugging in the root partition. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
461fbbd036 |
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest to exclude the root partition code, which is expected to grow significantly over time. This option is a tristate so future driver code can be built as a (m)odule, allowing faster development iteration cycles. If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub hv_root_partition() to return false unconditionally. This allows the compiler to optimize away root partition code blocks since they will be disabled at compile time. In the case of booting as root partition *without* CONFIG_MSHV_ROOT enabled, print a critical error (the kernel will likely crash). Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Michael Kelley
|
73fe9073c0 |
Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio()
The VMBus driver manages the MMIO space it owns via the hyperv_mmio
resource tree. Because the synthetic video framebuffer portion of the
MMIO space is initially setup by the Hyper-V host for each guest, the
VMBus driver does an early reserve of that portion of MMIO space in the
hyperv_mmio resource tree. It saves a pointer to that resource in
fb_mmio. When a VMBus driver requests MMIO space and passes "true"
for the "fb_overlap_ok" argument, the reserved framebuffer space is
used if possible. In that case it's not necessary to do another request
against the "shadow" hyperv_mmio resource tree because that resource
was already requested in the early reserve steps.
However, the vmbus_free_mmio() function currently does no special
handling for the fb_mmio resource. When a framebuffer device is
removed, or the driver is unbound, the current code for
vmbus_free_mmio() releases the reserved resource, leaving fb_mmio
pointing to memory that has been freed. If the same or another
driver is subsequently bound to the device, vmbus_allocate_mmio()
checks against fb_mmio, and potentially gets garbage. Furthermore
a second unbind operation produces this "nonexistent resource" error
because of the unbalanced behavior between vmbus_allocate_mmio() and
vmbus_free_mmio():
[ 55.499643] resource: Trying to free nonexistent
resource <0x00000000f0000000-0x00000000f07fffff>
Fix this by adding logic to vmbus_free_mmio() to recognize when
MMIO space in the fb_mmio reserved area would be released, and don't
release it. This filtering ensures the fb_mmio resource always exists,
and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio().
Fixes:
|
||
|
Nuno Das Neves
|
db912b8954 |
hyperv: Change hv_root_partition into a function
Introduce hv_curr_partition_type to store the partition type as an enum. Right now this is limited to guest or root partition, but there will be other kinds in future and the enum is easily extensible. Set up hv_curr_partition_type early in Hyper-V initialization with hv_identify_partition_type(). hv_root_partition() just queries this value, and shouldn't be called before that. Making this check into a function sets the stage for adding a config option to gate the compilation of root partition code. In particular, hv_root_partition() can be stubbed out always be false if root partition support isn't desired. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
9d8731a175 |
hyperv: Convert hypercall statuses to linux error codes
Return linux-friendly error codes from hypercall helper functions, which allows them to be used more flexibly. Introduce hv_result_to_errno() for this purpose, which also handles the special value U64_MAX returned from hv_do_hypercall(). Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Hamza Mahfooz
|
3a7f7785ea |
drivers/hv: add CPU offlining support
Currently, it is tedious to offline CPUs in a Hyper-V VM since CPUs may
have VMBus channels attached to them that a user would have to manually
rebind elsewhere. So, as made mention of in
commit
|
||
|
Hamza Mahfooz
|
5e4304ff8c |
drivers/hv: introduce vmbus_channel_set_cpu()
The core functionality in target_cpu_store() is also needed in a subsequent patch for automatically changing the CPU when taking a CPU offline. As such, factor out the body of target_cpu_store() into new function vmbus_channel_set_cpu() that can also be used elsewhere. No functional change is intended. Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Wei Liu <wei.liu@kernel.org> Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250117203309.192072-2-hamzamahfooz@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250117203309.192072-2-hamzamahfooz@linux.microsoft.com> |
||
|
Nuno Das Neves
|
0222eb30a3 |
hyperv: Move arch/x86/hyperv/hv_proc.c to drivers/hv
These helpers are not specific to x86_64 and will be needed by common code. Remove some unnecessary #includes. Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Link: https://lore.kernel.org/r/1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Nuno Das Neves
|
e96204e5e9 |
hyperv: Move hv_current_partition_id to arch-generic code
Move hv_current_partition_id and hv_get_partition_id() to hv_common.c, and call hv_get_partition_id() on arm64 in hyperv_init(). These aren't specific to x86_64 and will be needed by common code. Set hv_current_partition_id to HV_PARTITION_ID_SELF by default. Rename struct hv_get_partition_id to hv_output_get_partition_id, to make it distinct from the function hv_get_partition_id(), and match the original Hyper-V struct name. Remove the BUG()s. Failing to get the id need not crash the machine. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com> |
||
|
Joel Granados
|
1751f872cc |
treewide: const qualify ctl_tables where applicable
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit
|
||
|
Roman Kisel
|
9263abc7fd |
hyperv: Enable the hypercall output page for the VTL mode
Due to the hypercall page not being allocated in the VTL mode, the code resorts to using a part of the input page. Allocate the hypercall output page in the VTL mode thus enabling it to use it for output and share code with dom0. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Link: https://lore.kernel.org/r/20250108222138.1623703-4-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250108222138.1623703-4-romank@linux.microsoft.com> |
||
|
Jacob Pan
|
1da602ec36 |
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
The Hyper-V balloon driver installs a custom callback for handling page onlining operations performed by the memory hotplug subsystem. This custom callback is global, and overrides the default callback (generic_online_page) that Linux otherwise uses. The custom callback properly handles memory that is hot-added by the balloon driver as part of a Hyper-V hot-add region. But memory can also be hot-added directly by a device driver for a vPCI device, particularly GPUs. In such a case, the custom callback installed by the balloon driver runs, but won't find the page in its hot-add region list and doesn't online it, which could cause driver initialization failures. Fix this by having the balloon custom callback run generic_online_page() when the page isn't part of a Hyper-V hot-add region, thereby doing the default Linux behavior. This allows device driver hot-adds to work properly. Similar cases are handled the same way in the virtio-mem driver. Suggested-by: Vikram Sethi <vsethi@nvidia.com> Tested-by: Michael Frohlich <mfrohlich@microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com> Link: https://lore.kernel.org/r/20250107180918.1053933-1-jacob.pan@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250107180918.1053933-1-jacob.pan@linux.microsoft.com> |
||
|
John Starks
|
fcf5203e28 |
Drivers: hv: vmbus: Log on missing offers if any
When resuming from hibernation, log any channels that were present before hibernation but now are gone. In general, the boot-time devices configured for a resuming VM should be the same as the devices in the VM at the time of hibernation. It's uncommon for the configuration to have been changed such that offers are missing. Changing the configuration violates the rules for hibernation anyway. The cleanup of missing channels is not straight-forward and dependent on individual device driver functionality and implementation, so it can be added in future with separate changes. Signed-off-by: John Starks <jostarks@microsoft.com> Co-developed-by: Naman Jain <namjain@linux.microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250102130712.1661-3-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250102130712.1661-3-namjain@linux.microsoft.com> |