This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The doorbell register on GB20x GPUs has additional fields.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GPUs exist now with a 64-bit BAR0, which mean that BAR1 and BAR2's
indices (as passed to pci_resource_len() etc) are bumped up by one.
Modify nvkm_device.resource_addr/size() to take an enum instead of
an integer bar index, and take IORESOURCE_MEM_64 into account when
translating to the "raw" bar id.
[airlied: fixup ERR_PTR]
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move all the remaining GSP-RM code together underneath a versioned path,
to make the code easier to work with when adding support for a newer RM
version.
Aside from adjusting include paths, no code change is intended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to specify a channel ID to RM during channel allocation, the
channel ID is broken down into a "userd page" index and an index into
that page.
It was assumed that RM would enforce that the same physical block of
memory be used for all CHIDs within a "userd page", and the GSP paths
override NVKM's normal CHID allocation to handle this.
However, none of that turns out to be necessary.
Remove the GSP-specific code and use the regular CHID allocation path.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
"&chan->cgrp->mutex" and "&cgrp->mutex" are the same thing. Use
"&cgrp->mutex" consistently. It looks nicer and it silences a
Smatch static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aBHaCM66pXaP84ei@stanley.mountain
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration
-----BEGIN PGP SIGNATURE-----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=d13e
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is just a wrap up of fixes from the last few days. It has the
proper fix to the i915/xe collision, we can clean up what you did
later once rc1 lands.
Otherwise it's a few other i915, a v3d, rockchip and a nouveau fix to
make GSP load on some original Turing GPUs.
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration"
* tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: handle engines in runl without nonstall interrupts.
drm/i915/perf: reconcile Excess struct member kernel-doc warnings
drm/i915/guc: reconcile Excess struct member kernel-doc warnings
drm/i915/gt: reconcile Excess struct member kernel-doc warnings
drm/i915/gem: reconcile Excess struct member kernel-doc warnings
drm/i915/dp: Fix the max DSC bpc supported by source
drm/i915: don't make assumptions about intel_wakeref_t type
drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
drm/i915/display: Fix C20 pll selection for state verification
drm/v3d: Fix support for register debugging on the RPi 4
drm/rockchip: vop2: Drop unused if_dclk_rate variable
drm/rockchip: vop2: Drop superfluous include
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmVkFCUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2e4IAIMMxdUGC1RDpSk2
cNe2XfULYD8pNDT9Io6668jELSfFQe8ELv4QloFwDDCKk2EDZUZxr3crIX9rweYI
D5xrAwY5uJQnAsRADEmWMUN0iWo3EX3G5OOUkJknGWvyPapByFvhDzzF2nZQ25xI
HjJ9b0OTOVJxDYspCtK0g+CGFtBjCiGpLSe/V67zlLX4ptWh5noqPWQE9/dyyIFD
Z2Jga3wQtsF1uvOx4g0tMzowTqaKMljf5R3t6LNT4yqmoxMdKGi4qgJQDp23vB36
KNmA/V4wQ+EDuD3QejebpuMCgZV7lYJxOlWtGt47/cF9z8wSp+8J92TUSzP23D4u
5yx5ihs=
=2beF
-----END PGP SIGNATURE-----
Merge v6.7-rc3 into drm-next
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") for further ast work in -next.
Minor conflicts in ivpu between 3de6d95978 ("accel/ivpu: Pass D0i3
residency time to the VPU firmware") and 3f7c063492
("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent
lines.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This probably isn't the ideal fix, but we ended up using chids
sparsely, and lots of things rely on indexing into the full range,
so just allocate the full range up front.
The GSP code fixes 8 channels into a userd page, but we end up using
a single userd page per channel so end up sparsely using the range.
Fixes a few crashes seen with multiple channels.
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com
This moves the initial effort to the latest 535 firmware.
The gsp msg structs have changed, and the message passing also.
The wpr also seems to have some struct changes.
This version of the firmware will be what we are stuck on for a while,
until we can refactor the driver and work out a better path forward.
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- (temporarily) disable if GSP-RM detected, will be added later
- add dtor() so GSP-RM paths can cleanup properly
- add alternate engine context mapping interface for RM engines
- add alternate chid interfaces to handle RM USERD oddities
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-26-skeggsb@gmail.com
We're adding better support for the non-stall interrupt, which will need
to fetch the interrupt vector from the runlist's primary engine.
NVKM doesn't support all target engines (ie. NVDEC etc), and it wouldn't
be ideal to completely fail initialisation in this case.
Instead. Remove runlists where we can't determine all the needed info.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-7-skeggsb@gmail.com
smatch reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18:
warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static?
nvkm_engn_cgrp_get is only used in runl.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228221533.3240520-1-trix@redhat.com
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error:
no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes]
451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
gf100_fifo_nonstall_block is only used in gf100.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Exposes a bunch of the new features that became possible as a result
of the earlier commits. DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.
For the moment, this just crudely ports DRM to the API changes.
- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Simplifies the GPU-specific code, completing the switch to newer HALs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Builds on the context tracking that was added earlier.
- marks engine context PTEs as 'priv' where possible
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
And use it to cleanup multiple implementations of almost the same thing.
- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Currently provided by {chan,dma,gpfifo}*.c, and those are going away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
That sure was fun to untangle.
- handled per-runlist, rather than globally
- more straight-forward process in general
- various potential SW/HW races have been fixed
- fixes lockdep issues that were present in >=gk104's prior implementation
- volta recovery now actually stands a chance of working
- volta/turing waiting for PBDMA idle before engine reset
- turing using hw-provided TSG info for CTXSW_TIMEOUT
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
A bunch of these can be handled in such a way that the channel can
continue, however, any of these are a pretty decent sign something
has gone horribly wrong, and the safest option is to disable the
channel.
This is a bit of a hack, we will want to handle these individually
and dump relevant debug info for each at some point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- nvkm_chan_error() built on top, stops channel and sends 'killed' event
- removes an odd double-bashing of channel enable regs on kepler and up
- pokes doorbell on turing and up, after enabling channel
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- stops programming (non-existent) runl id field on bind(), from maxwell
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds g8x/turing registers, which were missing before
- switches fermi to polled wait, like later hw (see: 4f2fc25c0f8bc...)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Channel groups have somewhat more complicated requirements than what we
currently support. An engine context is shared between all channels in
a channel group, VEID/subctx support (later) brings per-VEID components,
and we need to track an individual channel's engine context pointers.
This commit adds the structures and refcounting to support the above,
wrapping the prior implementation for the moment.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock
v2:
- remove unnecessary parenthesis
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
After updating GF100 implementation from the GK104/TU102 ones, and using
the new runlist/engine topology info, all three handlers become (almost)
identical.
- there's a temporary kludge to call through to the HW-specific recovery
- engine fault mapping info determined at load time, not on every fault
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
