With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.
Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.
As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use display class IDs from nvkm_rm_gpu, instead of copying them from the
non-GSP HALs.
Removes the AD102 display HAL, which is no longer required as there's no
support for it without GSP-RM.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to specify a channel ID to RM during channel allocation, the
channel ID is broken down into a "userd page" index and an index into
that page.
It was assumed that RM would enforce that the same physical block of
memory be used for all CHIDs within a "userd page", and the GSP paths
override NVKM's normal CHID allocation to handle this.
However, none of that turns out to be necessary.
Remove the GSP-specific code and use the regular CHID allocation path.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This has never really been used for anything, in part due to never
having reclocking stable enough in general to attempt to implement
dynamic clock changes based on load, etc.
To avoid having to rework its interfaces, remove it entirely.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-13-bskeggs@nvidia.com
This commit adds the initial code needed to boot the GSP-RM firmware
provided by NVIDIA, bringing with it the beginnings of Ada support.
Until it's had more testing and time to bake, support is disabled by
default (except on Ada). GSP-RM usage can be enabled by passing the
"config=NvGspRm=1" module option.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-33-skeggsb@gmail.com
- (temporarily) disable if GSP-RM detected, will be added later
- provide empty class list for non-GSP paths
- split tu102 from gm107, it will provide host classes later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-29-skeggsb@gmail.com
- (temporarily) disable if GSP-RM detected, will be added later
- provide empty class list for non-GSP paths
- split tu102- from gm107, they will provide host classes later
- fixup HW engine instance masks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-28-skeggsb@gmail.com
- (temporarily) disable if GSP-RM detected, will be added later
- add dtor() so GSP-RM paths can cleanup properly
- add alternate engine context mapping interface for RM engines
- add alternate chid interfaces to handle RM USERD oddities
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-26-skeggsb@gmail.com
Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.
- gv100 split from gp108 to handle FW exit status differences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.
ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).
The VPR scrubber code is fairly independent, and a good first target.
- adds better debug output to fw loading process, to ease bring-up/debug
v2:
- whitespace, 0->false
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reset regs won't be available on Ampere while SEC2 RTOS is running, and
we're apparently supposed to be doing this on earlier GPUs too.
v2:
- fixed some excessive indentation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Exposes a bunch of the new features that became possible as a result
of the earlier commits. DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.
For the moment, this just crudely ports DRM to the API changes.
- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Builds on the context tracking that was added earlier.
- marks engine context PTEs as 'priv' where possible
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
And use it to cleanup multiple implementations of almost the same thing.
- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Currently provided by {chan,dma,gpfifo}*.c, and those are going away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- nvkm_chan_error() built on top, stops channel and sends 'killed' event
- removes an odd double-bashing of channel enable regs on kepler and up
- pokes doorbell on turing and up, after enabling channel
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- adds g8x/turing registers, which were missing before
- switches fermi to polled wait, like later hw (see: 4f2fc25c0f8bc...)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Channel groups have somewhat more complicated requirements than what we
currently support. An engine context is shared between all channels in
a channel group, VEID/subctx support (later) brings per-VEID components,
and we need to track an individual channel's engine context pointers.
This commit adds the structures and refcounting to support the above,
wrapping the prior implementation for the moment.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock
v2:
- remove unnecessary parenthesis
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- removes a layer of indirection in the intr handling
- prevents non-stall ctrl racing with unknown intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Engine context tracking will move to nvkm_cgrp in later commits, so we
create SW-only channel groups on HW without support for them.
- switches to nvkm_chid for TSG/channel ID allocation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Creates an nvkm_runl for each runlist on the GPU, and an nvkm_engn for
each engine that is reachable from a runlist.
- basically what gk104- already does, but extended to all chips
- adds per-runlist CHID allocators (Ampere)
- splits g98/gt2xx out from g84 (different target engines)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Creates an nvkm_runq for each PBDMA, these will be associated with the
relevant runlist(s) later.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We need to be able to allocate TSG IDs as well as channel IDs, also,
Ampere has per-runlist channel IDs.
- holds per-ID private data, which will be used for/to protect lookup
- holds an nvkm_event which will be used for events tied to IDs
- not used yet beyond setup, and switching use of "fifo->nr - 1" for
channel ID mask to "chid->mask"
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Adds the basic skeleton for common channel (group) interfaces.
- common behaviour between <gk104 and >=gk104 impl's
- separates priv/user channel objects
- passthrough to existing object for now, kludges removed later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
- reads channel count from GPU from gm200 onwards
- removes gm20b/gp10b (they become identical to gm200/gp100)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
