This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit enables basic support for the GB100/GB102 Blackwell GPUs.
Beyond HW class ID plumbing there's very little change here vs GH100.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit enables basic support for Hopper GPUs, and is intended
primarily as a base supporting Blackwell GPUs, which reuse most of
the code added here.
Advanced features such as Confidential Compute are not supported.
Beyond a few miscellaneous register moves and HW class ID plumbing,
the bulk of the changes implemented here are to support the GSP-RM
boot sequence used on Hopper/Blackwell GPUs, as well as a new page
table layout.
There should be no changes here that impact prior GPUs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Co-developed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.
Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.
As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This has never really been used for anything, in part due to never
having reclocking stable enough in general to attempt to implement
dynamic clock changes based on load, etc.
To avoid having to rework its interfaces, remove it entirely.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-13-bskeggs@nvidia.com
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Exposes a bunch of the new features that became possible as a result
of the earlier commits. DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.
For the moment, this just crudely ports DRM to the API changes.
- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Adds the basic skeleton for common channel (group) interfaces.
- common behaviour between <gk104 and >=gk104 impl's
- separates priv/user channel objects
- passthrough to existing object for now, kludges removed later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
This replaces the twisty, confusing, relationship between nvkm_event and
nvkm_notify with something much simpler, and less racey. It also places
events in the object tree hierarchy, which will allow a heap of the code
tracking events across allocation/teardown/suspend to be removed.
This commit just adds the new interfaces, and passes the owning subdev to
the event constructor to enable debug-tracing in the new code.
v2:
- use ?: (lyude)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Will be used to more cleanly implement existing method interfaces that
take some confusing (IEDTkey, inherited from VBIOS, which RM no longer
uses on Ampere) match values to determine which display path to operate
on.
Methods will be protected from racing with supervisor, and from being
called where they shouldn't be (ie. without an OR assigned).
v2:
- use ?: (lyude)
v3:
- fix return code if noacquire() method fails
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Will be used to provide more solid driver interfaces in general, but
the immediate motivation is work towards fixing issues with handling
hotplug/DP IRQ events.
Its use is currently limited to where we support non-polled hotplug
already (ie. any GPU since NV40ish era, where our DCB handling works
well enough), until that gets cleaned up someday.
v2:
- use ?: (lyude)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replaces a bunch of unnecessarily duplicated boilerplate in per-chipset
code with a simpler, common, implementation.
Channel "awaken" notify code is completely gone for now. KMS has never
made use of it so far, and event notify handling is about to be changed
in general anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
About to expose head/output path/connector objects everywhere, so we will
need support for child classes prior to nv50 now.
Somewhat cleaner than the code >=nv50 used previously.
v2:
- use ?: (lyude)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We don't currently have any kind of real acceleration on Ampere GPUs,
but the TTM memcpy() fallback paths aren't really designed to handle
copies between different devices, such as on Optimus systems, and
result in a kernel OOPS.
A few options were investigated to try and fix this, but didn't work
out, and likely would have resulted in a very unpleasant experience
for users anyway.
This commit adds just enough support for setting up a single channel
connected to a copy engine, which the kernel can use to accelerate
the buffer copies between devices. Userspace has no access to this
incomplete channel support, but it's suitable for TTM's needs.
A more complete implementation of host(fifo) for Ampere GPUs is in
the works, but the required changes are far too invasive that they
would be unsuitable to backport to fix this issue on current kernels.
v2: fix GPFIFO length in RAMFC (reported by Karol)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
I honestly don't even know why... These have never been used.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
UEFI/RM no longer use IED scripts from the VBIOS, though they appear to
have been updated for use by the x86 VBIOS code, so we should be able to
continue using them for the moment.
Unfortunately, we require some hacks to do so, as the BeforeLinkTraining
IED script became a pointer to an array of scripts instead, without a
revbump of the relevant tables.
There's also some changes to SOR clock divider fiddling, which are
hopefully correct enough that things work as they should.
AFAIK, GA100 shouldn't have display, so it hasn't been added.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.
Fixes: b24413180f (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The token will also contain runlist ID on Turing, so instead expose it as
an opaque value from NVKM so the client doesn't need to care.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds support for:
- Selection of old/new-style page table layout (GP100MmuLayout=0/1).
- System-memory PDs.
New layout disabled by default for the moment, as we don't have a
backend that can handle it yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
