When userspace opts in to VM_BIND, the submit no longer holds references
keeping the VMA alive. This makes it difficult to distinguish between
UMD/KMD/app bugs. So add a debug option for logging the most recent VM
updates and capturing these in GPU devcoredumps.
The submitqueue id is also captured, a value of zero means the operation
did not go via a submitqueue (ie. comes from msm_gem_vm_close() tearing
down the remaining mappings when the device file is closed.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661518/
This submitqueue type isn't tied to a hw ringbuffer, but instead
executes on the CPU for performing async VM_BIND ops.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661517/
Add a SET_PARAM for userspace to request to manage to the VM itself,
instead of getting a kernel managed VM.
In order to transition to a userspace managed VM, this param must be set
before any mappings are created.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661494/
In the next commit, a way for userspace to opt-in to userspace managed
VM is added. For this to work, we need to defer creation of the VM
until it is needed.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661490/
If we haven't written the submit into the ringbuffer yet, then drop it.
The submit still retires through the normal path, to preserve fence
signalling order, but we can skip the IB's to userspace cmdstream.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661489/
Most of the driver code doesn't need to reach in to msm specific fields,
so just use the drm_gpuvm/drm_gpuva types directly. This should
hopefully improve commonality with other drivers and make the code
easier to understand.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661483/
Re-aligning naming to better match drm_gpuvm terminology will make
things less confusing at the end of the drm_gpuvm conversion.
This is just rename churn, no functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661466/
Just some tidying up.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661461/
This is a more descriptive name.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661459/
If we have a newer dtb than kernel, we could end up in a situation where
the GPU device is present in the dtb, but not in the drivers device
table. We don't want this to prevent the display from probing. So
check that we recognize the GPU before adding the GPU component.
v2: use %pOF
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/657701/
Now that we use a threaded IRQ, it should be safe to do this in the
fault handler.
We can also remove fault_info from struct msm_gpu and just pass it
directly.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/654889/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In the case of iova fault triggered devcore dumps, include additional
debug information based on what we think is the current page tables,
including the TTBR0 value (which should match what we have in
adreno_smmu_fault_info unless things have gone horribly wrong), and
the pagetable entries traversed in the process of resolving the
faulting iova.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/628117/
With preemption it is not enough to track the current_ctx_seqno globally
as execution might switch between rings.
This is especially problematic when current_ctx_seqno is used to
determine whether a page table switch is necessary as it might lead to
security bugs.
Track current context per ring.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618012/
Signed-off-by: Rob Clark <robdclark@chromium.org>
When debugging faults, it is useful to know how the BO is mapped (cached
vs WC, gpu readonly, etc).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/593854/
Perfetto can use these traces to track global and per-process GPU memory
usage.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/580854/
Reverse run-queue priority enumeration such that the higest priority is now 0,
and for each consecutive integer the prioirty diminishes.
Run-queues correspond to priorities. To an external observer a scheduler
created with a single run-queue, and another created with
DRM_SCHED_PRIORITY_COUNT number of run-queues, should always schedule
sched->sched_rq[0] with the same "priority", as that index run-queue exists in
both schedulers, i.e. a scheduler with one run-queue or many. This patch makes
it so.
In other words, the "priority" of sched->sched_rq[n], n >= 0, is the same for
any scheduler created with any allowable number of run-queues (priorities), 0
to DRM_SCHED_PRIORITY_COUNT.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-6-ltuikov89@gmail.com
Rename DRM_SCHED_PRIORITY_MIN to DRM_SCHED_PRIORITY_LOW.
This mirrors DRM_SCHED_PRIORITY_HIGH, for a list of DRM scheduler priorities
in ascending order,
DRM_SCHED_PRIORITY_LOW,
DRM_SCHED_PRIORITY_NORMAL,
DRM_SCHED_PRIORITY_HIGH,
DRM_SCHED_PRIORITY_KERNEL.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-5-ltuikov89@gmail.com
Mesa stopped using these pretty early in a6xx bringup[1]. Take advantage
of this to disallow some legacy UABI.
[1] 7ef722861b
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/551175/
Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.
This effectively reverts commit 1f6cca4049
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/516470/
Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm-next for v6.3
There is one devfreq patch, maintainer acked to land via msm-next to
avoid a build break on platforms that do not support PM_DEVFREQ. And
otherwise the usual assortment:
GPU:
- Add MSM_SUBMIT_BO_NO_IMPLICIT
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
- Include DSC blocks into register snapshot
- Misc HW catalog fixes
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
- Support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
- Fix the case of empty OPP tables (fixing db410c)
- DT schema rework and fixes
HDMI:
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
MDP5:
- Schema conversion to YAML
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv6zQ-zsgS+NG+WuV=tk51q9vA2QdKqYhNgiXQddAdZjA@mail.gmail.com
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.
Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.
v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
support progress detection (hdanton); removed unused a5xx
progress (without knowing how to adjust for data buffered
in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
duration when progress detection is applied
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
Because there could be transient votes from other drivers/tz/hyp which
may keep the cx gdsc enabled, we should poll until cx gdsc collapses.
We can use the reset framework to poll for cx gdsc collapse from gpucc
clk driver.
This feature requires support from the platform's gpucc driver.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/498397/
Link: https://lore.kernel.org/r/20220819015030.v5.5.I176567525af2b9439a7e485d0ca130528666a55c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
This converts over to use the shared GEM LRU/shrinker helpers. Note
that it means we are no longer tracking purgeable or willneed buffers
that are active separately. But the most recently pinned buffers should
be at the tail of the various LRUs, and the shrinker is already prepared
to encounter objects which are still active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/496131/
Link: https://lore.kernel.org/r/20220802155152.1727594-11-robdclark@gmail.com
From testing on sc7180-trogdor devices, reading the GMU registers
needs the GMU clocks to be enabled. Those clocks get turned on in
a6xx_gmu_resume(). Confusingly enough, that function is called as a
result of the runtime_pm of the GPU "struct device", not the GMU
"struct device". Unfortunately the current a6xx_gpu_busy() grabs a
reference to the GMU's "struct device".
The fact that we were grabbing the wrong reference was easily seen to
cause crashes that happen if we change the GPU's pm_runtime usage to
not use autosuspend. It's also believed to cause some long tail GPU
crashes even with autosuspend.
We could look at changing it so that we do pm_runtime_get_if_in_use()
on the GPU's "struct device", but then we run into a different
problem. pm_runtime_get_if_in_use() will return 0 for the GPU's
"struct device" the whole time when we're in the "autosuspend
delay". That is, when we drop the last reference to the GPU but we're
waiting a period before actually suspending then we'll think the GPU
is off. One reason that's bad is that if the GPU didn't actually turn
off then the cycle counter doesn't lose state and that throws off all
of our calculations.
Let's change the code to keep track of the suspend state of
devfreq. msm_devfreq_suspend() is always called before we actually
suspend the GPU and msm_devfreq_resume() after we resume it. This
means we can use the suspended state to know if we're powered or not.
NOTE: one might wonder when exactly our status function is called when
devfreq is supposed to be disabled. The stack crawl I captured was:
msm_devfreq_get_dev_status
devfreq_simple_ondemand_func
devfreq_update_target
qos_notifier_call
qos_max_notifier_call
blocking_notifier_call_chain
pm_qos_update_target
freq_qos_apply
apply_constraint
__dev_pm_qos_update_request
dev_pm_qos_update_request
msm_devfreq_idle_work
Fixes: eadf79286a ("drm/msm: Check for powered down HW in the devfreq callbacks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/489124/
Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
simple_ondemand interacts poorly with clamp_to_idle. It only looks at
the load since the last get_dev_status call, while it should really look
at the load over polling_ms. When clamp_to_idle true, it almost always
picks the lowest frequency on active because the gpu is idle between
msm_devfreq_idle/msm_devfreq_active.
This logic could potentially be moved into devfreq core.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-3-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move tracking and busy time calculation to msm_devfreq_get_dev_status.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-2-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The ring seqno counter duplicates the fence-context last_fence counter.
They end up getting incremented in lock-step, on the same scheduler
thread, but the split just makes things less obvious.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220411215849.297838-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the cause of using the GPU via virtgpu, the host side process is
really a sort of proxy, and not terribly interesting from the PoV of
crash/fault logging. Add a way to override these per process so that
we can see the guest process's name.
v2: Handle kmalloc failure, add comment to explain kstrdup returns
NULL if passed NULL [Dan Carpenter]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 64b value field is already suffient to hold a pointer instead of
immediate, but we also need a length field.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
Other processes don't need to know about faults that they are isolated
from by virtue of address space isolation. They are only interested in
whether some of their state might have been corrupted.
But to be safe, also track unattributed faults. This case should really
never happen unless there is a kernel bug (and that would never happen,
right?)
v2: Instead of adding a new param, just change the behavior of the
existing param to match what userspace actually wants [anholt]
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5934
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220201161618.778455-3-robdclark@gmail.com
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
System suspend uses pm_runtime_force_suspend(), which cheekily bypasses
the runpm reference counts. This doesn't actually work so well when the
GPU is active. So add a reasonable delay waiting for the GPU to become
idle.
Alternatively we could just return -EBUSY in this case, but that has the
disadvantage of causing system suspend to fail.
v2: s/ret/remaining [sboyd], and switch to using active_submits count
to ensure we aren't racing with submit cleanup (and devfreq idle
work getting scheduled, etc)
v3: fix inverted logic
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220108180913.814448-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Re-work the boost and idle clamping to use PM QoS requests instead, so
they get aggreggated with other requests (such as cooling device).
This does have the minor side-effect that devfreq sysfs min_freq/
max_freq files now reflect the boost and idle clamping, as they show
(despite what they are documented to show) the aggregated min/max freq.
Fixing that in devfreq does not look straightforward after considering
that OPPs can be dynamically added/removed. However writes to the
sysfs files still behave as expected.
v2: Use 64b math to avoid potential 32b overflow
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211120200103.1051459-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add some helpers for fence comparision, which handle rollover properly,
and stop open coding fence seqno comparisions.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
