Data for HDMI, DSI and DP blocks only makes sense for the KMS parts of
the driver. Move corresponding data pointers from struct msm_drm_private
to struct msm_kms.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662580/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Drop superfluous msm_drm_private::num_crtcs in favour of using
drm_mode_config::num_crtc or MAX_CRCS as appropriate.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662578/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Most of the driver code doesn't need to reach in to msm specific fields,
so just use the drm_gpuvm/drm_gpuva types directly. This should
hopefully improve commonality with other drivers and make the code
easier to understand.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661483/
Re-aligning naming to better match drm_gpuvm terminology will make
things less confusing at the end of the drm_gpuvm conversion.
This is just rename churn, no functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661466/
All resource allocation is centered around the LMs. Then other blocks
(except DSCs) are allocated basing on the LMs that was selected, and LM
powers up the CRTC rather than the encoder.
Moreover if at some point the driver supports encoder cloning,
allocating resources from the encoder will be incorrect, as all clones
will have different encoder IDs, while LMs are to be shared by these
encoders.
In addition, move mode_changed() to dpu_crtc as encoder no longer has
access to topology information
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[quic_abhinavk@quicinc.com: Refactored resource allocation for CDM]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[quic_jesszhan@quicinc.com: Changed to grabbing exising global state]
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
[DB: rebased on top of msm-next]
[DB: fixed resource allcoation to ignore the active_changed flag]
Patchwork: https://patchwork.freedesktop.org/patch/637487/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-2-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
Passing a variable string as a printf style format is potentially
dangerous that -Wformat-security can warn about if enabled. A new
instance just got added:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function 'dpu_kms_mdp_snapshot':
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1046:49: error: format not a string literal and no format arguments [-Werror=format-security]
1046 | vbif->name);
| ~~~~^~~~~~
Fix this one and the preexisting -Wformat-security warnings the in the
DRM code for snapdragon.
Fixes: 1a40bb31fc ("drm/msm/dpu: Add VBIF to DPU snapshot") # and others
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629126/
Link: https://lore.kernel.org/r/20241216083319.1838449-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Only several SSPP blocks support such features as YUV output or scaling,
thus different DRM planes have different features. Properly utilizing
all planes requires the attention of the compositor, who should
prefer simpler planes to YUV-supporting ones. Otherwise it is very easy
to end up in a situation when all featureful planes are already
allocated for simple windows, leaving no spare plane for YUV playback.
To solve this problem make all planes virtual. Each plane is registered
as if it supports all possible features, but then at the runtime during
the atomic_check phase the driver selects backing SSPP block for each
plane.
As the planes are attached to the CRTC and not the encoder, the SSPP
blocks are also allocated per CRTC ID (all other resources are currently
allocated per encoder ID). This also matches the hardware requirement,
where both rectangles of a single SSPP can only be used with the LM
pair.
Note, this does not provide support for using two different SSPP blocks
for a single plane or using two rectangles of an SSPP to drive two
planes. Each plane still gets its own SSPP and can utilize either a solo
rectangle or both multirect rectangles depending on the resolution.
Note #2: By default support for virtual planes is turned off and the
driver still uses old code path with preallocated SSPP block for each
plane. To enable virtual planes, pass 'msm.dpu_use_virtual_planes=1'
kernel parameter.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629022/
Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-1-65221f213ce1@linaro.org
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unfortunately the tooling doesn't check documents placed before funciton
prototypes. Such comments frequently become outdated, miss several
params, etc. Move documentation for the functions to be placed before
the actual function body, allowing 'make W=1' to actually check these
comments and report an error.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622690/
Link: https://lore.kernel.org/r/20241102-dpu-docs-rework-v1-1-d735853fd6db@linaro.org
Add support for MSM8996, which - fun fact - was the SoC that this driver
(or rather SDE, its downstream origin) was meant for and first tested on.
It has some hardware that differs from the modern SoCs, so not a lot of
current structs could have been reused. It's also seemingly the only SoC
supported by DPU that uses RGB pipes.
Note, by default this platform is still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: rebased on top of sblk changes, add dpu_rgb_sblk]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[Removed intr_start from CTLs config, removed LM_3 and LM_4]
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/617309/
Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-1-594c3e3190b4@mainlining.org
Some platforms provides a mechanism for configuring the mapping between
(one or two) DisplayPort intfs and their PHYs.
In particular SC8180X requires this to be configured, since on this
platform there are fewer controllers than PHYs.
The change implements the logic for optionally configuring which PHY
each of the DP INTFs should be connected to and marks the SC8180X DPU to
program 2 entries.
For now the request is simply to program the mapping 1:1, any support
for alternative mappings is left until the use case arrise.
Note that e.g. msm-4.14 unconditionally maps INTF 0 to PHY 0 on all
platforms, so perhaps this is needed in order to get DisplayPort working
on some other platforms as well.
Co-developed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/600895/
Link: https://lore.kernel.org/r/20240625-dp-phy-sel-v3-1-c77c7066c454@linaro.org
The struct msm_display_info has is_te_using_watchdog_timer field which
is neither set anywhere nor is flexible enough to specify different
sources. Replace it with the field specifying the vsync source using
enum dpu_vsync_source.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598738/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-5-67a0116b5366@linaro.org
All the components of YUV420 over DP are added. Therefore, let's mark the
connector property as true for DP connector when the DP type is not eDP
and when there is a CDM block available.
Changes in v3:
- Move setting the connector's ycbcr_420_allowed parameter so
that it is not dependent on if the dp_display is not eDP
Changes in v2:
- Check for if dp_catalog has a CDM block available instead of
checking if VSC SDP is allowed when setting the dp connector's
ycbcr_420_allowed parameter
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579628/
Link: https://lore.kernel.org/r/20240222194025.25329-20-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bring in hardware support for the SDM660 and SDM630 platforms, which
belong to the same DPU generation as MSM8998.
Note, by default these platforms are still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577507/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-4-945d08ef3fa8@linaro.org
For some of the platforms (e.g. SDM660, SDM630, MSM8996, etc.) it is
possible to support this platform via the DPU driver (e.g. to provide
support for DP, multirect, etc). Add a modparam to be able to switch
between these two drivers.
All platforms supported by both drivers are by default handled by the
MDP5 driver. To let them be handled by the DPU driver pass the
`msm.prefer_mdp5=false` kernel param.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577504/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-3-945d08ef3fa8@linaro.org
The drmm handler will perform drm_encoder_cleanup() for us. Moreover if
we call drm_encoder_cleanup() manually, the drmm_encoder_alloc_release()
will spawn warnings at drivers/gpu/drm/drm_encoder.c:214. Drop these
extra drm_encoder_cleanup() calls.
Fixes: cd42c56d9c ("drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> #sm8250 CI
Patchwork: https://patchwork.freedesktop.org/patch/571562/
Link: https://lore.kernel.org/r/20231211145440.3647001-1-dmitry.baryshkov@linaro.org
