If the Adreno device is used in a headless mode, there is no need to
build all KMS components. Build corresponding parts conditionally, only
selecting them if modeset support is actually required.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662581/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Data for HDMI, DSI and DP blocks only makes sense for the KMS parts of
the driver. Move corresponding data pointers from struct msm_drm_private
to struct msm_kms.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662580/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Drop superfluous msm_drm_private::num_crtcs in favour of using
drm_mode_config::num_crtc or MAX_CRCS as appropriate.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662578/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
There is no reason to store CRTC id, it's a part of the drm_crtc. Drop
this member and use drm_crtc.name for the warning message.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662576/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The global workqueue is only used for vblanks inside KMS code. Move
allocation / flushing / deallcation of it to msm_kms.c
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662573/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Most of the driver code doesn't need to reach in to msm specific fields,
so just use the drm_gpuvm/drm_gpuva types directly. This should
hopefully improve commonality with other drivers and make the code
easier to understand.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661483/
Now that we've realigned deletion and allocation, switch over to using
drm_gpuvm/drm_gpuva. This allows us to support multiple VMAs per BO per
VM, to allow mapping different parts of a single BO at different virtual
addresses, which is a key requirement for sparse/VM_BIND.
This prepares us for using drm_gpuvm to translate a batch of MAP/
MAP_NULL/UNMAP operations from userspace into a sequence of map/remap/
unmap steps for updating the page tables.
Since, unlike our prior vm/vma setup, with drm_gpuvm the vm_bo holds a
reference to the GEM object. To prevent reference loops causing us to
leak all GEM objects, we implicitly tear down the mapping when the GEM
handle is close or when the obj is unpinned. Which means the submit
needs to also hold a reference to the vm_bo, to prevent the VMA from
being torn down while the submit is in-flight.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661479/
The fb only deals with kms->vm, so make that explicit. This will start
letting us refcount the # of times the fb is pinned, so we can only
unpin the vma after last user of the fb is done. Having a single
reference count really only works if there is only a single vm.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661476/
Re-aligning naming to better match drm_gpuvm terminology will make
things less confusing at the end of the drm_gpuvm conversion.
This is just rename churn, no functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661466/
v12.0 DPU on SM8750 comes with new LM crossbar that requires each pipe
rectangle to be programmed separately in blend stage. Implement support
for this along with a new CTL_LAYER_ACTIVE register and setting the
blend stage in layer mixer code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659632/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-12-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
v12.0 DPU on SM8750 comes with new CTL_PIPE_ACTIVE register for
selective activation of pipes, which replaces earlier
dpu_hw_ctl_setup_blendstage() code path for newer devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659630/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-11-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
v12.0 DPU on SM8750 comes with 10-bit color alpha. Add register
differences and new implementations of setup_alpha_out(),
setup_border_color() and setup_blend_config().
Notable changes in v6:
Correct fg_alpha shift on new DPU, pointed out by Abel Vesas.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659629/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-10-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Linux coding style asks to use kernel types like u32 instead of uint32_t
and code already has it in other places, so unify the remaining pieces.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659623/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-9-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
As features bits are now unused by some of the hardware block
configuration structures, remove the 'features' from the DPU_HW_BLK_INFO
so that it doesn't get included into hw info structures by default and
only include it when necessary.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/655420/
Link: https://lore.kernel.org/r/20250522-dpu-drop-features-v5-30-3b2085a07884@oss.qualcomm.com
As a preparation to further MDSS-revision cleanups stop passing MDSS
revision to the setup_timing_gen() callback. Instead store a pointer to
it inside struct dpu_hw_intf and use it diretly. It's not that the MDSS
revision can chance between dpu_hw_intf_init() and
dpu_encoder_phys_vid_setup_timing_engine().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/655362/
Link: https://lore.kernel.org/r/20250522-dpu-drop-features-v5-1-3b2085a07884@oss.qualcomm.com
Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Follow the changes in the commit a2649952f6 ("drm/msm/dpu: remove
DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove
DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform.
Single CTL is used for all interfaces used by a single path
Fixes: 1785751734 ("drm/msm/dpu: add catalog entry for SAR2130P")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/651883/
Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
