- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookups.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-16-ville.syrjala@linux.intel.com
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
All PFN_* pfn_t flags have been removed. Therefore there is no longer a
need for the pfn_t type and all uses can be replaced with normal pfns.
Link: https://lkml.kernel.org/r/bbedfa576c9822f8032494efbe43544628698b1f.1750323463.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Björn Töpel <bjorn@rivosinc.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: John Groves <john@groves.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMS-only drivers should only allocate dumb buffers. The driver custom
ioctls are only meant for the usermode gpu driver (mesa), and not for
general consumption, so they don't make sense for standalone KMS
drivers.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662598/
Avoid the possibility of missing features between the split and unified
drm driver cases by defining DRIVER_FEATURES_GPU / KMS and using those
in the drm_driver initializations.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662595/
There are cases when we want to have separate DRM devices for GPU and
display pipelines.
One example is development, when it is beneficial to be able to bind the
GPU driver separately, without the display pipeline (and without the
hacks adding "amd,imageon" to the compatible string).
Another example is some of Qualcomm platforms, which have two MDSS
units, but only one GPU. With current approach it is next to impossible
to support this usecase properly, while separate binding allows users to
have three DRM devices: two for MDSS units and a single headless GPU.
Add kernel param msm.separate_gpu_kms, which if set to true forces
creation of separate display and GPU DRM devices. Mesa supports this
setup by using the kmsro wrapper.
The param is disabled by default, in order to be able to test userspace
for the compatibility issues. Simple clients are able to handle this
setup automatically.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662590/
[Rob: renamed the modparam to separate_gpu_kms, and add missing
DRIVER_GEM_GPUVA]
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Currently the msm driver creates an extra interim platform device for
Imageon GPUs. This is not ideal, as the device doesn't have
corresponding OF node. If the headless mode is used for newer GPUs, then
the msm_use_mmu() function can not detect corresponding IOMMU devices.
Also the DRM device (although it's headless) is created with modesetting
flags being set.
To solve all these issues, rework the way the Imageon devices are bound.
Remove the interim device, don't register a component and instead use a
cut-down version of the normal functions to probe or remove the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662584/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move symbol selection to be more fine grained: select DP helpers only if
DP driver is also enabled, move KMS and display helpers to the newly
introduced DRM_MSM_KMS.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662589/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Both perf and hangrd make sense only for GPU devices. Bail out if we are
registering a KMS-only device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662583/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
If the Adreno device is used in a headless mode, there is no need to
build all KMS components. Build corresponding parts conditionally, only
selecting them if modeset support is actually required.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662581/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Data for HDMI, DSI and DP blocks only makes sense for the KMS parts of
the driver. Move corresponding data pointers from struct msm_drm_private
to struct msm_kms.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662580/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Drop superfluous msm_drm_private::num_crtcs in favour of using
drm_mode_config::num_crtc or MAX_CRCS as appropriate.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662578/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
There is no reason to store CRTC id, it's a part of the drm_crtc. Drop
this member and use drm_crtc.name for the warning message.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662576/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Extract two more KMS-related codepieces to msm_kms.c, removing last
pieces of KMS code from msm_drv.c.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662574/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The global workqueue is only used for vblanks inside KMS code. Move
allocation / flushing / deallcation of it to msm_kms.c
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662573/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Now that Adreno specifics are out of the way, use the common config
(but leave the HBB hardcoding in place until that is wired up on the
other side).
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660985/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Make the values a bit more meaningful.
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660981/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
It's only necessary for some lower end parts.
Also rename it to min_acc_len_64b to denote that if set, the minimum
access length is 64 bits, 32b otherwise.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660977/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
It's supposed to be on when the UBWC encoder version is >= 4.0.
Drop the per-GPU assignments.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660975/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
ubwc_swizzle is a bitmask. Check for a bit to make it more obvious.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660973/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This bit is set iff the UBWC version is 1.0. That notably does not
include QCM2290's "no UBWC".
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660971/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Instead of setting it on a gpu-per-gpu basis, converge it to the
intended "is A650 family or A7xx".
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660969/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The bit must be set to 1 if the UBWC encoder version is >= 3.0, drop it
as a separate field.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660967/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Start the great despaghettification by getting a pointer to the common
UBWC configuration, which houses e.g. UBWC versions that we need to
make decisions.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660965/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The Adreno part of the driver exposes this value to userspace, and the
SMEM data source also presents a x+13 value. Keep things coherent and
make the value uniform across them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660961/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Sync register xml from mesa commit eb3e0b7164a3 ("freedreno/a6xx: Split
descriptors out into their own file").
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662470/
A large number of (unsorted or separate) small (<2MB) mappings can cause
a lot of, probably unnecessary, prealloc pages. Ie. a single 4k page
size mapping will pre-allocate 3 pages (for levels 2-4) for the
pagetable. Which can chew up a large amount of unneeded memory. So add
a mechanism to put an upper bound on the # of pre-alloc pages.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661529/
With the conversion to drm_gpuvm, we lost the lazy VMA cleanup, which
means that fb cleanup/unpin when pageflipping to new scanout buffers
immediately unmaps the scanout buffer. This is costly (with tlbinv,
it can be 4-6ms for a 1080p scanout buffer, and more for higher
resolutions)!
To avoid this, introduce a vma_ref, which is incremented whenever
userspace has a GEM handle or dma-buf fd. When unpinning if the
vm is the kms->vm we defer tearing down the VMA until the vma_ref
drops to zero. If the buffer is still part of a flip-chain then
userspace will be holding some sort of reference to the BO, either
via a GEM handle and/or dma-buf fd. So this avoids unmapping the VMA
when there is a strong possibility that it will be needed again.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661538/
Bump version to signal to userspace that VM_BIND is supported.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661535/
This resolves a potential deadlock vs msm_gem_vm_close(). Otherwise for
_NO_SHARE buffers msm_gem_describe() could be trying to acquire the
shared vm resv, while already holding priv->obj_lock. But _vm_close()
might drop the last reference to a GEM obj while already holding the vm
resv, and msm_gem_free_object() needs to grab priv->obj_lock, a locking
inversion.
OTOH this is only for debugfs and it isn't critical if we undercount by
skipping a locked obj. So just use trylock() and move along if we can't
get the lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661525/
So we can monitor how many pages are getting preallocated vs how many
get used.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661521/
Make the VM log a bit more useful by providing a reason for the unmap
(ie. closing VM vs evict/purge, etc)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661527/
When userspace opts in to VM_BIND, the submit no longer holds references
keeping the VMA alive. This makes it difficult to distinguish between
UMD/KMD/app bugs. So add a debug option for logging the most recent VM
updates and capturing these in GPU devcoredumps.
The submitqueue id is also captured, a value of zero means the operation
did not go via a submitqueue (ie. comes from msm_gem_vm_close() tearing
down the remaining mappings when the device file is closed.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661518/
Add a VM_BIND ioctl for binding/unbinding buffers into a VM. This is
only supported if userspace has opted in to MSM_PARAM_EN_VM_BIND.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661524/
With async VM_BIND, the actual pgtable updates are deferred.
Synchronously, a list of map/unmap ops will be generated, but the
actual pgtable changes are deferred. To support that, split out
op handlers and change the existing non-VM_BIND paths to use them.
Note in particular, the vma itself may already be destroyed/freed
by the time an UNMAP op runs (or even a MAP op if there is a later
queued UNMAP). For this reason, the op handlers cannot reference
the vma pointer.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661516/
Introduce a mechanism to count the worst case # of pages required in a
VM_BIND op.
Note that previously we would have had to somehow account for
allocations in unmap, when splitting a block. This behavior was removed
in commit 33729a5fc0 ("iommu/io-pgtable-arm: Remove split on unmap
behavior)"
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661515/
With user managed VMs and multiple queues, it is in theory possible to
trigger map/unmap errors. These will (in a later patch) mark the VM as
unusable. But we want to tell the io-pgtable helpers not to spam the
log. In addition, in the unmap path, we don't want to bail early from
the unmap, to ensure we don't leave some dangling pages mapped.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661520/
This submitqueue type isn't tied to a hw ringbuffer, but instead
executes on the CPU for performing async VM_BIND ops.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661517/
Any place we wait for a BO to become idle, we should use BOOKKEEP usage,
to ensure that it waits for _any_ activity.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661506/
We'll be re-using these for the VM_BIND ioctl.
Also, rename a few things in the uapi header to reflect that syncobj use
is not specific to the submit ioctl.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661512/
As with devcoredump, we need to iterate the VMAs to figure out what to
dump.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661510/
In this case, we need to iterate the VMAs looking for ones with
MSM_VMA_DUMP flag.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661504/
Similar to the previous commit, add support for dumping partial
mappings.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661514/
