Replace mgag200's code for programming the hardware gamma LUT with
DRM helpers. Either load a provided gamma ramp or program a default.
Set the individual entries with a callback.
Each gamma value is given as 3 individual 16-bit values for red,
green and blue. The driver reduces them to 8 bit to make them fit
into hardware registers.
v2:
- fix coding style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-4-tzimmermann@suse.de
This reverts commit 6c9e14ee9f.
This reverts commit d5070c9b29.
This reverts commit 89c6ea2006.
The VLINE interrupt doesn't work correctly on G200SE-A (at least). We
have also seen missing interrupts on G200ER. So revert vblank support.
Fixes frozen displays and warnings about missed vblanks.
[ 33.818362] [CRTC:34:crtc-0] vblank wait timed out
From the vblank code, the driver only keeps the register constants and
the line that disables all interrupts in mgag200_device_init(). Both
is still useful without vblank handling.
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/dri-devel/Zvx6lSi7oq5xvTZb@agluck-desk3.sc.intel.com/raw
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015063932.8620-1-tzimmermann@suse.de
Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-6-tzimmermann@suse.de
Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.
DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-5-tzimmermann@suse.de
Duplicate VGA output to VGA-BMC output and update all code for Matrox
server chips. The new output represents a VGA output that has a BMC
attached to it. No functional changes so far.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-2-tzimmermann@suse.de
Fix support for VBLANK interrupts on G200ER, G200EV and G200SE, which
use a slightly different implementation than the others. The original
commits forgot to update the custom helpers when adding interrupt
handling for VBLANK events.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 89c6ea2006 ("drm/mgag200: Add vblank support")
Fixes: d5070c9b29 ("drm/mgag200: Implement struct drm_crtc_funcs.get_vblank_timestamp")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731071004.519566-1-tzimmermann@suse.de
There's no VBLANK interrupt on Matrox chipsets. The workaround that is
being used here and in other free Matrox drivers is to program <linecomp>
to the value of <vblkstr> and enable the VLINE interrupt. This triggers
an interrupt at the time when VBLANK begins.
VLINE uses separate registers for enabling and clearing pending interrupts.
No extra synchronization between irq handler and the rest of the driver is
required.
v6:
- clear VLINE status bit before registering IRQ (Jocelyn)
v5:
- disable all interrupts before registering IRQ (Jocelyn)
- don't read from ICLEAR (Jocelyn)
v4:
- recreate patch on latest upstream
- use devm_request_irq() for managed cleanup
- fail if vblanking cannot be initialized
- rename register constants (Sam, Emil)
- clear interrupt before registering handler (Ville)
- move <linecomp> programming into separate commit
- set <linecomp> to <vblkstr>
- fix typo in commit message
v3:
- set <linecomp> to <vdisplay> + 1 to trigger at VBLANK
- expand comment on linecomp
v2:
- only signal vblank on CRTC 0
- use constants for registers and fields
- set VLINECLR before enabling interrupt
- test against STATUS and IEN in irq handler
- coding-style fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-7-tzimmermann@suse.de
The callbacks disable_vidrst and enable_vidrst are obsolete. Remove
the fields from struct mgag200_device_funcs. Instead call their
implementations directly of the field 'has_vidrst' has been set in
struct mgag200_device_info.
Also change the logic slightly. The BMC used to start and stop scanout
during the CRTC's atomic_enable and atomic_disable. Plane updates were
done while the BMC scanned out the display. Now only stop once in
atomic_disable at the beginning of a modeset and then restart the
scanout at the end of a modeset in atomic_enable. While the modeset
takes place, the BMC does not scanout at all.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711072415.11831-3-tzimmermann@suse.de
The VRSTEN and HRSTEN bits control whether a CRTC synchronizes its
display signal with an external source on the VIDRST pin. The G200WB
and G200EW3 models synchronize with a BMC chip, but different external
video encoders, such as the Matrox Maven, can also be attached to the
pin.
Only set VRSTEN and HRSTEN bits in the CRTC mode-setting code, so the
bits are independent from the BMC. Add the field set_vidrst to the CRTC
state for this purpose. Off by default, control the CRTC VIDRST setting
from the CRTC's atomic_check helper.
v3:
- don't clear bits unnecessary (Jocelyn)
v2:
- keep logic entirely in CRTC (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711072415.11831-2-tzimmermann@suse.de
Set .detect_ctx() in struct drm_connector_helper_funcs to the
common helper drm_connector_helper_detect_from_ddc() and enable
polling for the connector. Mgag200 will now test for the monitor's
presence by probing the DDC in regular intervals.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610141141.29527-4-tzimmermann@suse.de
The BMC output can be viewed via the BMC's web interface or a
similar client. Represent it as virtual encoder and connector.
It's attached to the same CRTC as the VGA connector.
The connector's status depends on the physical connector's status.
The BMC is only connected if the physical connector is not. This
is necessary to support userspace clients that can only handle a
single output per CRTC.
The BMC is a server feature. Add a BMC output for all server chips,
but not the desktop models.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610141141.29527-3-tzimmermann@suse.de
The various models have common code for the VGA output's encoder and
connector. Move everything into a single shared source file. Remove some
obsolete initializer macros. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610141141.29527-2-tzimmermann@suse.de
Allocate instances of struct mga_i2c_chan in mgag200_ddc_create()
and return a pointer to the contained i2c adapter. The callers of
the function are now independent from struct mga_i2c_chan.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-5-tzimmermann@suse.de
When mgag200 switched from simple KMS to regular atomic helpers,
the initialization of the gamma settings was lost.
This leads to a black screen, if the bios/uefi doesn't use the same
pixel color depth.
This has been fixed with commit ad81e23426 ("drm/mgag200: Fix gamma
lut not initialized.") for most G200, but G200ER, G200EV, G200SE use
their own version of crtc_helper_atomic_enable() and need to be fixed
too.
Fixes: 1baf9127c4 ("drm/mgag200: Replace simple-KMS with regular atomic helpers")
Cc: <stable@vger.kernel.org> #v6.1+
Reported-by: Roger Sewell <roger.sewell@cantab.net>
Suggested-by: Roger Sewell <roger.sewell@cantab.net>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214163849.359691-1-jfalempe@redhat.com
Each model's specific code is located in a separate file. The type
field in struct mga_device is no unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de
The CRTC atomic_enable helper contains per-model branches for
G200ER, G200EV and G200SE devices. Implement a dedicated helper
for each of them and remove the branches from the shared helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de
Move the mode-config code into model-specific code and call the
plane/CRTC helpers as needed. This will help with providing per-
model implementations of individual helpers.
Duplication of the pipeline init function is accepted. Some macros
simplify this for shared helpers.
v3:
* clean up style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de
Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.
The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.
This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.
v3:
* clean up style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de
While currently empty, the device callbacks will allow mgag200's
modesetting code to interact with the BMC and PIXPLLC.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-10-tzimmermann@suse.de
Provide an init function for each model's DAC registers. Remove
the shared helper.
The code for initializing the DAC registers consisted of a large
table of default value, plus many exceptions for the various G200
models. Providing a per-model implementation makes if more readable.
At some point, some of the initialization should probably move into
the modesetting code.
v2:
* don't duplicate DAC values unnecessarily (Sam, Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de
The bits for accessing I2C data and clock channels varies among
models. Store them in the device-info structure for consumption
by the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-11-tzimmermann@suse.de
Set new vidrst flag in device info for models that synchronize with
external sources (i.e., BMCs). In modesetting, set the corresponding
bits from the device-info flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-10-tzimmermann@suse.de
The maximum resolution and memory bandwidth are model-specific limits.
Both are used during display-mode validation. Store the values in struct
mgag200_device_info and simplify the validation code.
v2:
* 'bandwith' -> 'bandwidth' in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-9-tzimmermann@suse.de
Flag devices with broken handling of the startadd field in
struct mgag200_device_info, instead of PCI driver data. This
reduces the driver data to a simple type constant.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-8-tzimmermann@suse.de
While currently empty, struct mgag200_device_info, will provide static,
constant information on each device model.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-7-tzimmermann@suse.de
Rework mgag200_regs_init() and mgag200_mm_init() into device preinit
and init functions. The preinit function, mgag200_device_preinit(),
requests and maps a device's I/O and video memory. The init function,
mgag200_device_init() initializes the state of struct mga_device.
Splitting the initialization between the two functions is necessary
to perform per-model operations between the two calls, such as reading
the unique revision ID on G200SEs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-6-tzimmermann@suse.de
Call mgag200_device_probe_vram() from each model's initializer. The
G200EW3 uses a special helper with additional instructions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-5-tzimmermann@suse.de
Split the PCI code into a single call for each model. G200 and G200SE
each contain a dedicated helper with additional instructions. Noteably,
the G200ER has no code for PCI setup.
In a later patch, the magic numbers should be replaced by descriptive
constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-4-tzimmermann@suse.de
Add a separate initializer function for each model. Add separate
devic structures for G200 and G200SE, which require additional
information.
Also move G200's and G200SE's helpers for reading the BIOS and
version id into model-specific code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de
