mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
1570 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Linus Torvalds
|
260f6f4fda |
drm for 6.17-rc1
non-drm: rust: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings mtd: - driver for Intel GPU non-volatile storage i2c - designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA= =n9MO -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... |
||
|
Linus Torvalds
|
7031769e10 |
vfs-6.17-rc1.mmap_prepare
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCgQAKCRCRxhvAZXjc os+nAP9LFHUwWO6EBzHJJGEVjJvvzsbzqeYrRFamYiMc5ulPJwD+KW4RIgJa/MWO pcYE40CacaekD8rFWwYUyszpgmv6ewc= =wCwp -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull mmap_prepare updates from Christian Brauner: "Last cycle we introduce f_op->mmap_prepare() in |
||
|
Linus Torvalds
|
7879d7aff0 |
vfs-6.17-rc1.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaIM/KwAKCRCRxhvAZXjc
opT+AP407JwhRSBjUEmHg5JzUyDoivkOySdnthunRjaBKD8rlgEApM6SOIZYucU7
cPC3ZY6ORFM6Mwaw+iDW9lasM5ucHQ8=
=CHha
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc VFS updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add ext4 IOCB_DONTCACHE support
This refactors the address_space_operations write_begin() and
write_end() callbacks to take const struct kiocb * as their first
argument, allowing IOCB flags such as IOCB_DONTCACHE to propagate
to the filesystem's buffered I/O path.
Ext4 is updated to implement handling of the IOCB_DONTCACHE flag
and advertises support via the FOP_DONTCACHE file operation flag.
Additionally, the i915 driver's shmem write paths are updated to
bypass the legacy write_begin/write_end interface in favor of
directly calling write_iter() with a constructed synchronous kiocb.
Another i915 change replaces a manual write loop with
kernel_write() during GEM shmem object creation.
Cleanups:
- don't duplicate vfs_open() in kernel_file_open()
- proc_fd_getattr(): don't bother with S_ISDIR() check
- fs/ecryptfs: replace snprintf with sysfs_emit in show function
- vfs: Remove unnecessary list_for_each_entry_safe() from
evict_inodes()
- filelock: add new locks_wake_up_waiter() helper
- fs: Remove three arguments from block_write_end()
- VFS: change old_dir and new_dir in struct renamedata to dentrys
- netfs: Remove unused declaration netfs_queue_write_request()
Fixes:
- eventpoll: Fix semi-unbounded recursion
- eventpoll: fix sphinx documentation build warning
- fs/read_write: Fix spelling typo
- fs: annotate data race between poll_schedule_timeout() and
pollwake()
- fs/pipe: set FMODE_NOWAIT in create_pipe_files()
- docs/vfs: update references to i_mutex to i_rwsem
- fs/buffer: remove comment about hard sectorsize
- fs/buffer: remove the min and max limit checks in __getblk_slow()
- fs/libfs: don't assume blocksize <= PAGE_SIZE in
generic_check_addressable
- fs_context: fix parameter name in infofc() macro
- fs: Prevent file descriptor table allocations exceeding INT_MAX"
* tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
netfs: Remove unused declaration netfs_queue_write_request()
eventpoll: fix sphinx documentation build warning
ext4: support uncached buffered I/O
mm/pagemap: add write_begin_get_folio() helper function
fs: change write_begin/write_end interface to take struct kiocb *
drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter
drm/i915: Use kernel_write() in shmem object create
eventpoll: Fix semi-unbounded recursion
vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes()
fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable
fs/buffer: remove the min and max limit checks in __getblk_slow()
fs: Prevent file descriptor table allocations exceeding INT_MAX
fs: Remove three arguments from block_write_end()
fs/ecryptfs: replace snprintf with sysfs_emit in show function
fs: annotate suspected data race between poll_schedule_timeout() and pollwake()
docs/vfs: update references to i_mutex to i_rwsem
fs/buffer: remove comment about hard sectorsize
fs_context: fix parameter name in infofc() macro
VFS: change old_dir and new_dir in struct renamedata to dentrys
proc_fd_getattr(): don't bother with S_ISDIR() check
...
|
||
|
Taotao Chen
|
048832a3f4
|
drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter
Refactors shmem_pwrite() to replace the ->write_begin/end logic with a write_iter-based implementation using kiocb and iov_iter. While kernel_write() was considered, it caused about 50% performance regression. vfs_write() is not exported for kernel use. Therefore, file->f_op->write_iter() is called directly with a synchronously initialized kiocb to preserve performance and remove write_begin usage. Performance results use gem_pwrite on Intel CPU i7-10700 (average of 10 runs): - ./gem_pwrite --run-subtest bench -s 16384 Before: 0.205s, After: 0.214s - ./gem_pwrite --run-subtest bench -s 524288 Before: 6.1021s, After: 4.8047s Part of a series refactoring address_space_operations write_begin and write_end callbacks to use struct kiocb for passing write context and flags. Signed-off-by: Taotao Chen <chentaotao@didiglobal.com> Link: https://lore.kernel.org/20250716093559.217344-3-chentaotao@didiglobal.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Taotao Chen
|
e7b840fd49
|
drm/i915: Use kernel_write() in shmem object create
Replace the write_begin/write_end loop in i915_gem_object_create_shmem_from_data() with call to kernel_write(). This function initializes shmem-backed GEM objects. kernel_write() simplifies the code by removing manual folio handling. Part of a series refactoring address_space_operations write_begin and write_end callbacks to use struct kiocb for passing write context and flags. Signed-off-by: Taotao Chen <chentaotao@didiglobal.com> Link: https://lore.kernel.org/20250716093559.217344-2-chentaotao@didiglobal.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Alistair Popple
|
21aa65bf82 |
mm: remove callers of pfn_t functionality
All PFN_* pfn_t flags have been removed. Therefore there is no longer a need for the pfn_t type and all uses can be replaced with normal pfns. Link: https://lkml.kernel.org/r/bbedfa576c9822f8032494efbe43544628698b1f.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Björn Töpel <bjorn@rivosinc.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christoph Hellwig
|
a8fb49c6ab |
mm: remove the for_reclaim field from struct writeback_control
This field is now only set to one in the i915 gem code that only calls writeback_iter on it, which ignores the flag. All other checks are thuse dead code and the field can be removed. Link: https://lkml.kernel.org/r/20250610054959.2057526-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christoph Hellwig
|
44b1b073eb |
mm: stop passing a writeback_control structure to shmem_writeout
shmem_writeout only needs the swap_iocb cookie and the split folio list. Pass those explicitly and remove the now unused list member from struct writeback_control. Link: https://lkml.kernel.org/r/20250610054959.2057526-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Simona Vetter
|
69d09a2609 |
Merge tag 'drm-intel-next-2025-07-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.17: Features and functionality: - Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe) - Add initial flip queue implementation, disabled by default, for LNL and PTL (Ville) - Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt Atwood, Dnyaneshwar) - Extend drm_panel and follower support to DDI eDP (Arun) Refactoring and cleanups: - Make all global state objects opaque (Jani) - Move display works to display specific unordered workqueue (Luca) - Add and use struct drm_device based pcode interface (Jani, Lucas) - Use clamp() instead of max()+min() combo (Ankit) - Simplify wait for power well disable (Jani) - Various stylistics cleanups and renames (Jani) Fixes: - Deal with loss of pipe DMC state (Ville) - Fix PTL HDCP2 stream status check (Suraj) - Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa) - Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann) - Fix PCON capability reads on non-branch devices (Chaitanya) - Fix which platforms have ultra joiner (Ankit) DRM core changes: - Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe) - Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support (Jocelyn Falempe) Merges: - Backmerge drm-next for drm_panel and xe changes (Jani) Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com |
||
|
Dave Airlie
|
ca39a37174 |
Merge tag 'drm-intel-gt-next-2025-07-02' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes: Fixes/improvements/new stuff: - Avoid GuC scheduling stalls [guc] (Julia Filipchuk) - Remove force_probe requirement for DG1 (Ville Syrjälä) - Handle errors correctly to avoid losing GuC-2-Host messages [guc] (Jesus Narvaez) - Avoid double wakeref put if GuC context deregister failed [guc] (Jesus Narvaez) - Avoid timeline memory leak with signals and legacy platforms [ringbuf] (Janusz Krzysztofik) - Fix MEI (discrete) interrupt handler on RT kernels [gsc] (Junxiao Chang) Miscellaneous: - Allow larger memory allocation [selftest] (Mikolaj Wasiak) - Use provided dma_fence_is_chain (Tvrtko Ursulin) - Fix build error with GCOV and AutoFDO enabled [pmu] (Tzung-Bi Shih) - Fix build error some more (Arnd Bergmann) - Reduce stack usage in igt_vma_pin1() (Arnd Bergmann) - Move out engine related macros from i915_drv.h (Krzysztof Karas) - Move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h (Krzysztof Karas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://lore.kernel.org/r/aGTjUBeOQFw26bRT@linux |
||
|
Al Viro
|
24368a744b |
sanitize handling of long-term internal mounts
Original rationale for those had been the reduced cost of mntput() for the stuff that is mounted somewhere. Mount refcount increments and decrements are frequent; what's worse, they tend to concentrate on the same instances and cacheline pingpong is quite noticable. As the result, mount refcounts are per-cpu; that allows a very cheap increment. Plain decrement would be just as easy, but decrement-and-test is anything but (we need to add the components up, with exclusion against possible increment-from-zero, etc.). Fortunately, there is a very common case where we can tell that decrement won't be the final one - if the thing we are dropping is currently mounted somewhere. We have an RCU delay between the removal from mount tree and dropping the reference that used to pin it there, so we can just take rcu_read_lock() and check if the victim is mounted somewhere. If it is, we can go ahead and decrement without and further checks - the reference we are dropping is not the last one. If it isn't, we get all the fun with locking, carefully adding up components, etc., but the majority of refcount decrements end up taking the fast path. There is a major exception, though - pipes and sockets. Those live on the internal filesystems that are not going to be mounted anywhere. They are not going to be _un_mounted, of course, so having to take the slow path every time a pipe or socket gets closed is really obnoxious. Solution had been to mark them as long-lived ones - essentially faking "they are mounted somewhere" indicator. With minor modification that works even for ones that do eventually get dropped - all it takes is making sure we have an RCU delay between clearing the "mounted somewhere" indicator and dropping the reference. There are some additional twists (if you want to drop a dozen of such internal mounts, you'd be better off with clearing the indicator on all of them, doing an RCU delay once, then dropping the references), but in the basic form it had been * use kern_mount() if you want your internal mount to be a long-term one. * use kern_unmount() to undo that. Unfortunately, the things did rot a bit during the mount API reshuffling. In several cases we have lost the "fake the indicator" part; kern_unmount() on the unmount side remained (it doesn't warn if you use it on a mount without the indicator), but all benefits regaring mntput() cost had been lost. To get rid of that bitrot, let's add a new helper that would work with fs_context-based API: fc_mount_longterm(). It's a counterpart of fc_mount() that does, on success, mark its result as long-term. It must be paired with kern_unmount() or equivalents. Converted: 1) mqueue (it used to use kern_mount_data() and the umount side is still as it used to be) 2) hugetlbfs (used to use kern_mount_data(), internal mount is never unmounted in this one) 3) i915 gemfs (used to be kern_mount() + manual remount to set options, still uses kern_unmount() on umount side) 4) v3d gemfs (copied from i915) Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Jocelyn Falempe
|
116d86dd69 |
drm/i915/display: Add drm_panic support for Y-tiling with DPT
On Alder Lake and later, it's not possible to disable tiling when DPT is enabled. So this commit implements Y-Tiling support, to still be able to draw the panic screen. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20250624091501.257661-10-jfalempe@redhat.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> |
||
|
Jocelyn Falempe
|
75fb60e5ad |
drm/i915: Add intel_bo_panic_setup() and intel_bo_panic_finish()
Implement both functions for i915 and xe, they prepare the work for drm_panic support. They both use kmap_try_from_panic(), and map one page at a time, to write the panic screen on the framebuffer. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20250624091501.257661-8-jfalempe@redhat.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> |
||
|
Jocelyn Falempe
|
da091afacb |
drm/i915: Add intel_bo_alloc_framebuffer()
Encapsulate the struct intel_framebuffer into an xe_framebuffer or i915_framebuffer, and allow to add specific fields for each variant for the panic use-case. This is particularly needed to have a struct xe_res_cursor available to support drm panic on discrete GPU. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20250624091501.257661-7-jfalempe@redhat.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> |
||
|
Lorenzo Stoakes
|
20ca475d98
|
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
The call_mmap() function violates the existing convention in include/linux/fs.h whereby invocations of virtual file system hooks is performed by functions prefixed with vfs_xxx(). Correct this by renaming call_mmap() to vfs_mmap(). This also avoids confusion as to the fact that f_op->mmap_prepare may be invoked here. Also rename __call_mmap_prepare() function to vfs_mmap_prepare() and adjust to accept a file parameter, this is useful later for nested file systems. Finally, fix up the VMA userland tests and ensure the mmap_prepare -> mmap shim is implemented there. Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Link: https://lore.kernel.org/8d389f4994fa736aa8f9172bef8533c10a9e9011.1750099179.git.lorenzo.stoakes@oracle.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Jani Nikula
|
34c55367af |
Merge drm/drm-next into drm-intel-next
Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*() and BIT_U*() macros. Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Linus Torvalds
|
b08494a8f7 |
drm for 6.16-rc1
new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - remove disgusting turds - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmg2aVAACgkQDHTzWXnE hr6DjhAApr2fZjugU3EmpsARdcIWgEd+X65R97ef7RlUGqBKm2joSwZGOhH0oBsG 9WyO92Qzu6XMe8OibKqY4D2hir9UPz5v+uEWe3q9CzZGbNyAwyVRjVkaKpnI9upv 1dmHFI7HgPu6qbz6RfPIfgALBLXvVXMaQ4+ZgN/cLtZFa+OLAV5ByqWsRPPXZFb0 F/pQGQ4ursglfA+LH3SVPfnTN53lu93IlM5/Os9OQQGj+44w94zQ6DCm7CY1AugH n+RM/0Yv7WaoF1ByeOtq4FcrmLRrd+ozsvITbRZqhOx7zS/mhP8LRzAwgKWOYzSh puKunyQiSdHR7FSqSi8uyY3YumcLWNa/17LMKoTf+KqweJbKGE7RVBuFBn6WUdPb AYHZrSB4USAeyahdrrsU+q7ltu5urs5ckpbXsRurMiaUz/BLim1PIm3N5FDLPY7B PD1n1FcMUv3CmJT5Y+aNIQgmf1/dETESRTSAgSoOo3gNp6jdRCYqSuWIBsppibWT 26+tyz0/FGhE50QviHzg0Sv+jd/g93fN6snNlV8wNFMviq3bC69Toa+y3qJ5e7UC /42R7nCWdkCZJfr6E67rOaahe9TDV/LXLqPErwptOkdK8sMchaIgF+deybgTtTi/ zGRBfjLvb5ocYBmPbeGX4mtXNRpyZ3o9I0QUyGUO4zMwFXmFwn0= =jpVr -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ... |
||
|
Joonas Lahtinen
|
bbfd559475 |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in
|
||
|
Joonas Lahtinen
|
d2dc30e0aa |
Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1"
This reverts commit |
||
|
Jani Nikula
|
62384da2a0 |
drm/i915: stop including display/intel_display_{core, limits}.h from i915_drv.h
Make i915->display pointer opaque to most of core i915 driver. Lots of places now need explicit include of intel_display_core.h, or a more specific header. With this dependency broken, changes in display should cause radically less recompilation of i915. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/b381b59acb7e4f600e0282935a68aedf77768109.1747907216.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Jani Nikula
|
96b451d53a |
drm/{i915,xe}: convert i915 and xe display members into pointers
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
|
||
|
Jani Nikula
|
db5302ae57 |
Merge drm/drm-next into drm-intel-next
Backmerge to sync with v6.15-rc, xe, and specifically async flip changes in drm-misc. Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Ville Syrjälä
|
d6e0208196 |
drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes:
|
||
|
Jani Nikula
|
a1216d84f1 |
drm/i915/gem: drop intel_display.h include
The include is not needed since commit
|
||
|
Tvrtko Ursulin
|
16fa6b8999 |
drm/i915: Use provided dma_fence_is_chain
Replace open-coded helper with the subsystem one. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250512072047.56851-1-tvrtko.ursulin@igalia.com |
||
|
Dave Airlie
|
8d782ad650 |
Merge tag 'drm-intel-gt-next-2025-05-08-1' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes: - Fix SLPC wait boosting reference counting to avoid getting stuck on non-boost frequency on power saving profile on DG1/DG2 (Vinay) - Add 20ms delay to engine reset for robustness on HSW (Nitin) - Use proper sleeping functions for timeouts shorter than 20ms (Andi) - Fix fence not released on early probe errors for HuC (Janusz) - Remove const from struct i915_wa list allocation (Kees) - Apply SPDX license format where missing and use single-line format (Andi) - Whitespace fixes (Dan, Andi) - Selftest improvements (Mikolaj, Badal, Sk, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://lore.kernel.org/r/aBxNYp0IviE23zy-@jlahtine-mobl |
||
|
Dave Airlie
|
b60301774a |
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani) Driver Changes: - Updates for xe3lpd display (Gustavo) - Fix link training interrupted by HPD pulse (Imre) - Watermark bound checks for DSC (Ankit) - VRR Refactor and other fixes and improvements (Ankit) - More conversions towards intel_display struct (Gustavo, Jani) - Other clean-up patches towards a display separation (Jani) - Maintain asciibetical order for HAS_* macros (Ankit) - Fixes around probe/initialization (Janusz) - Fix build and doc build issue (Yue, Rodrigo) - DSI related fixes (Suraj, William, Jani) - Improve DC6 entry counter (Mohammed) - Fix xe2hpd memory type identification (Vivek) - PSR related fixes and improvements (Animesh, Jouni) - DP MST related fixes and improvements (Imre) - Fix scanline_offset for LNL+/BMG+ (Ville) - Some gvt related fixes and changes (Ville, Jani) - Some PLL code adjustment (Ville) - Display wa addition (Vinod) - DRAM type logging (Lucas) - Pimp the initial FB readout (Ville) - Some sagv/bw cleanup (Ville) - Remove i915_display_capabilities debugfs entry (Jani) - Move PCH type to display caps debugfs entry (Jani) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+ k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw== =3VwH -----END PGP SIGNATURE----- Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Cross-subsystem Changes: - Update GVT MAINTAINERS (Jani) Driver Changes: - Updates for xe3lpd display (Gustavo) - Fix link training interrupted by HPD pulse (Imre) - Watermark bound checks for DSC (Ankit) - VRR Refactor and other fixes and improvements (Ankit) - More conversions towards intel_display struct (Gustavo, Jani) - Other clean-up patches towards a display separation (Jani) - Maintain asciibetical order for HAS_* macros (Ankit) - Fixes around probe/initialization (Janusz) - Fix build and doc build issue (Yue, Rodrigo) - DSI related fixes (Suraj, William, Jani) - Improve DC6 entry counter (Mohammed) - Fix xe2hpd memory type identification (Vivek) - PSR related fixes and improvements (Animesh, Jouni) - DP MST related fixes and improvements (Imre) - Fix scanline_offset for LNL+/BMG+ (Ville) - Some gvt related fixes and changes (Ville, Jani) - Some PLL code adjustment (Ville) - Display wa addition (Vinod) - DRAM type logging (Lucas) - Pimp the initial FB readout (Ville) - Some sagv/bw cleanup (Ville) - Remove i915_display_capabilities debugfs entry (Jani) - Move PCH type to display caps debugfs entry (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com |
||
|
Matthew Wilcox (Oracle)
|
776a853a43
|
i915: Use writeback_iter()
Convert from an inefficient loop to the standard writeback iterator. Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org> Link: https://lore.kernel.org/r/20250402150005.2309458-7-willy@infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Ville Syrjälä
|
33b3c4791e |
drm/i915: Extract intel_memory_type_is_local()
Extract the "is this memory region local?" check into a helper. I'll have another use for this in the BIOS FB takeover. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-2-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> |
||
|
Andi Shyti
|
4e22d5b8ba |
drm/i915/gem: Convert SPDX headers to single-line format
Replace multi-line SPDX license headers with single-line equivalents (// SPDX-License-Identifier: MIT or /* ... */ for headers), as preferred by current kernel coding style. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mikołaj Wasiak <mikolaj.wasiak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250327232629.2939-1-andi.shyti@linux.intel.com |
||
|
Dave Airlie
|
cf05922d63 |
Merge tag 'drm-intel-gt-next-2025-03-12' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
UAPI Changes: - Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps (José Roberto de Souza) Driver Changes: Fixes/improvements/new stuff: - Implement vmap/vunmap GEM object functions (Asbjørn Sloth Tønnesen) Miscellaneous: - Various register definition cleanups (Ville Syrjälä) - Fix typo in a comment [gt/uc] (Yuichiro Tsuji) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z9IXs5CzHHKScuQn@linux |
||
|
Mikolaj Wasiak
|
34b1c1c71d |
i915/selftest/igt_mmap: let mmap tests run in kthread
When the driver is loaded on the system with numa nodes it might be run in a kthread, which makes it impossible to use current->mm in the selftest. This patch allows the selftest to use current->mm by using active_mm. Signed-off-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com> Reviewed-by: Eugene Kobyak <eugene.kobyak@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2w6pt2hnemndwmanwhyn3keexa6vtha7rmo6rqoerkmyxhbrh2@ls7lndjpia6z |
||
|
Dave Airlie
|
d115a38f3c |
Merge tag 'drm-intel-gt-next-2025-02-26' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
UAPI Changes: - Add sysfs for SLPC power profiles [slpc] (Vinay Belgaumkar) Driver Changes: Fixes/improvements/new stuff: - Fix zero delta busyness issue [pmu] (Umesh Nerlige Ramappa) - Fix page cleanup on DMA remap failure (Brian Geffon) - Debug print LRC state entries only if the context is pinned [guc] (Daniele Ceraolo Spurio) - Drop custom hotplug code [pmu] (Lucas De Marchi) - Use spin_lock_irqsave() in interruptible context [guc] (Krzysztof Karas) - Add wait on depth stall done bit handling [gen12] (Juha-Pekka Heikkila) Miscellaneous: - Change throttle criteria for rps [selftest] (Raag Jadav) - Add debug print about hw config table size (John Harrison) - Include requested frequency in slow firmware load messages [uc] (John Harrison) - Remove i915_pmu_event_event_idx() [pmu] (Lucas De Marchi) - Remove unused live_context_for_engine (Dr. David Alan Gilbert) - Add Wa_22010465259 in its respective WA list (Ranu Maurya) - Correct frequency handling in RPS power measurement [selftests] (Sk Anirban) - Add helper function slpc_measure_power [guc/slpc] (Sk Anirban) - Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset" [gt] (Sebastian Brzezinka) - Avoid using uninitialized context [selftests] (Krzysztof Karas) - Use struct_size() helper in kmalloc() (luoqing) - Use prandom in selftest [selftests] (Markus Theil) - Replace kmap with its safer kmap_local_page counterpart [gt] (Andi Shyti) Merges: - Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z77NLt2mR7SqxJ4u@linux |
||
|
José Roberto de Souza
|
bfef148f36 |
drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps
Commit |
||
|
Asbjørn Sloth Tønnesen
|
d0efbe85e1 |
drm/i915: implement vmap/vunmap GEM object functions
Implement i915_gem_vmap_object() and i915_gem_vunmap_object(), based on i915_gem_dmabuf_vmap() and i915_gem_dmabuf_vunmap(). This enables a drm_client to use drm_client_buffer_vmap() and drm_client_buffer_vunmap() on hardware using the i915 driver. Tested with a currently out of tree pixelflut drm_client[1] on: - Lenovo ThinkCentre M720q (CoffeeLake-S GT2 / Intel UHD Graphics 630) - Dell Wyse N06D - 3030 LT (ValleyView on Intel Celeron N2807 SOC) [1] XDP->DRM pixelflut: https://labitat.dk/wiki/Pixelflut-XDR Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240629182513.78026-1-asbjorn@asbjorn.st |
||
|
Jani Nikula
|
fe7fad476e |
drm/i915/pxp & drm/xe/pxp: Figure out pxp instance from the gem object
It's undesirable to have to figure out the pxp pointer in display code. For one thing, its type is different for i915 and xe. Since we can figure the pxp pointer out in the pxp code from the gem object, offload it there. v2: Rebase Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250228114527.3091620-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Dave Airlie
|
16893dd23f |
Merge tag 'drm-intel-next-2025-02-24' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.15: Features and functionality: - Enable DP 128b/132b SST DSC (Jani, Imre) - Allow DSB to perform commits when VRR is enabled (Ville) - Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit) - Allow DSB usage when PSR is enabled on LNL+ (Jouni) - Enable Panel Replay mode change without full modeset (Jouni) - Enable async flips with compressed buffers on ICL+ (Ville) - Support luminance based brightness control via DPCD for eDP (Suraj) - Enable VRR enable/disable without full modeset (Mitul, Ankit) - Add debugfs facility for force testing HDCP 1.4 (Suraj) - Add scaler tracepoints, improve plane tracepoints (Ville) - Improve DMC wakelock debugging facilities (Gustavo) - Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo) - Provide more information on display faults (Ville) Refactoring and cleanups: - Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre) - Joiner and Y plane reorganization (Ville) - Move HDCP debugfs to intel_hdcp.c (Jani) - Clean up and unify LSPCON interfaces (Jani) - Move code out of intel_display.c to reduce its size (Ville) - Clean up and simplify DDI port enabling/disabling (Imre) - Make LPT LP a dedicated PCH type, refactor (Jani) - Simplify DSC range BPG offset calculation (Ankit) - Scaler cleanups (Ville) - Remove unused code from GVT (David Alan Gilbert) - Improve plane debugging (Ville) - DSB and VRR refactoring (Ville) Fixes: - Check if vblank is sufficient for DSC prefill and scaler (Mitul) - Fix Mesa clear color alignment regression (Ville) - Add missing TC DP PHY lane stagger delay (Imre) - Fix DSB + VRR usage for PTL+ (Ville) - Improve robustness of display VT-d workarounds (Ville) - Fix platforms for dbuf tracker state service programming (Ravi) - Fix DMC wakelock support conditions (Gustavo) - Amend DMC wakelock register ranges (Gustavo) - Disable the Common Primary Timing Generator (CMTG) (Gustavo) - Enable C20 PHY SSC (Suraj) - Add workaround for DKL PHY DP mode write (Nemesa) - Fix build warnings on clamp() usage (Guenter Roeck, Ankit) - Fix error handling while adding a connector (Imre) - Avoid full modeset at probe on vblank delay mismatches (Ville) - Fix encoder HDMI check for HDCP line rekeying (Suraj) - Fix HDCP repeater authentication during topology change (Suraj) - Handle display PHY power state reset for power savings (Mika) - Fix typos all over the place (Nitin) - Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar) - Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre) - Do not hardcode LSPCON settle timeout (Giedrius Statkevičius) Xe driver changes: - Re-use display vmas when possible (Maarten) - Remove double pageflip (Maarten) - Enable DP tunneling (Imre) - Separate i915 and xe tracepoints (Ville) DRM core changes: - Increase DPCD eDP display control CAP size to 5 bytes (Suraj) - Add DPCD eDP version 1.5 definition (Suraj) - Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius) Merges: - Backmerge drm-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com |
||
|
luoqing
|
fc2ef5b6e1 |
selftests: i915: Use struct_size() helper in kmalloc()
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Signed-off-by: luoqing <luoqing@kylinos.cn> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250208013539.3586855-1-l1138897701@163.com |
||
|
Ville Syrjälä
|
2bb9476795 |
drm/i915: Decouple i915_gem_dumb_create() from the display a bit
Pass the device argument as drm_device to intel_plane_fb_max_stride() to decouple i915_gem_dumb_create() vs. the display code a bit. xe currently doesn't even call this, but it probably should... v2: s/dev/drm/ (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-3-ville.syrjala@linux.intel.com |
||
|
Ville Syrjälä
|
44a34dec43 |
drm/i915: Calculate the VT-d guard size in the display code
Currently i915_gem_object_pin_to_display_plane() uses i915_gem_object_get_tile_row_size() to calculate the tile row size for the VT-d guard w/a. That's not really proper since i915_gem_object_get_tile_row_size() only works for fenced BOs, nor does it take rotation into account. Remedy the situation by calculating the VT-d guard size in the display code where we have more information readily available. Although the default guard size (168 PTEs now) should cover the more typical fb size use cases anyway, and only very large Y/Yf-tiled framebuffers might have tile row size that exceeds it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Jani Nikula
|
ea9f8f2b21 |
Merge drm/drm-next into drm-intel-next
Sync with v6.14-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Tvrtko Ursulin
|
c771600c6a |
Merge drm/drm-next into drm-intel-gt-next
We need
|
||
|
Brian Geffon
|
fa6182c8b1
|
drm/i915: Fix page cleanup on DMA remap failure
When converting to folios the cleanup path of shmem_get_pages() was missed. When a DMA remap fails and the max segment size is greater than PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment size. The cleanup code isn't properly using the folio apis and as a result isn't handling compound pages correctly. v2 -> v3: (Ville) Just use shmem_sg_free_table() as-is in the failure path of shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable but it will be reset when it retries in shmem_sg_alloc_table(). v1 -> v2: (Ville) Fixed locations where we were not clearing mapping unevictable. Cc: stable@vger.kernel.org Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487 Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/ Fixes: |
||
|
Brian Geffon
|
9e304a1863 |
drm/i915: Fix page cleanup on DMA remap failure
When converting to folios the cleanup path of shmem_get_pages() was
missed. When a DMA remap fails and the max segment size is greater than
PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment
size. The cleanup code isn't properly using the folio apis and as a
result isn't handling compound pages correctly.
v2 -> v3:
(Ville) Just use shmem_sg_free_table() as-is in the failure path of
shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable
but it will be reset when it retries in shmem_sg_alloc_table().
v1 -> v2:
(Ville) Fixed locations where we were not clearing mapping unevictable.
Cc: stable@vger.kernel.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487
Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/
Fixes:
|
||
|
Dr. David Alan Gilbert
|
93b69c0482
|
drm/i915: Remove unused live_context_for_engine
The last use of live_context_for_engine() was removed in 2021 by
commit
|
||
|
Nitin Gote
|
54296aa4cf
|
drm/i915/gem: fix typos in i915/gem files
Fix all typos in files under drm/i915/gem reported by codespell tool.
v2: Codespell won't catch it, but it should be
"user defined" and not "use defined". <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-4-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
||
|
Linus Torvalds
|
1d6d399223 |
Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
||
|
Dave Airlie
|
255e094a30 |
Merge tag 'drm-intel-gt-next-2025-01-10' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes: - More robust engine resets on Haswell and older (Nitin) - Dead code removal (David) - Selftest, logging and tracing improvements (Sk, Nitin, Sebastian, Apoorva) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z4DidoEACFu7D6iG@jlahtine-mobl.ger.corp.intel.com |
||
|
Frederic Weisbecker
|
b04e317b52 |
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread_create() creates a kthread without running it yet. kthread_run() creates a kthread and runs it. On the other hand, kthread_create_worker() creates a kthread worker and runs it. This difference in behaviours is confusing. Also there is no way to create a kthread worker and affine it using kthread_bind_mask() or kthread_affine_preferred() before starting it. Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]() that behaves just like kthread_run(). kthread_create_worker[_on_cpu]() will now only create a kthread worker without starting it. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> |