On Alder Lake and later, it's not possible to disable tiling when DPT
is enabled.
So this commit implements Y-Tiling support, to still be able to draw
the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-10-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Encapsulate the struct intel_framebuffer into an xe_framebuffer
or i915_framebuffer, and allow to add specific fields for each
variant for the panic use-case.
This is particularly needed to have a struct xe_res_cursor available
to support drm panic on discrete GPU.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-7-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-5-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.
v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
move changes in can_async_flip to new patch (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
Userspace can pass damage area clips per plane to track
changes in a plane and some display components can utilze
these damage clips for efficiently handling use cases like
FBC, PSR etc. A merged damage area is generated and its
coordinates are updated relative to viewport and HW and
stored in the plane_state. This merged damage areas will be
used for FBC dirty rect support in xe3 in the follow-up
patch.
Big thanks to Ville Syrjala for his contribuitions in shaping
up of this series.
v1: - Move damage_merged helper to cover bigjoiner case and use
the correct plane state for damage find helper (Ville)
- Damage handling code under HAS_FBC_DIRTY_RECT() so the
the related part will be executed only for xe3+
- Changed dev_priv to i915 in one of the functions
v2: - damage reported is stored in the plane state after coords
adjustmentments irrespective of fbc dirty rect support.
- Damage to be empty in case of plane not visible (Ville)
- Handle fb could be NULL and plane not visible cases (Ville)
v3: - No need to empty damage in case disp ver < 12 (Ville)
- update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-4-vinod.govindapillai@intel.com
It's undesirable to have to figure out the pxp pointer in display
code. For one thing, its type is different for i915 and xe.
Since we can figure the pxp pointer out in the pxp code from the gem
object, offload it there.
v2: Rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228114527.3091620-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
I want to capture a little bit more information about the state
of the plane upon faults. To that end introduce a small plane error
state struct and provide per-plane vfuncs to read it out.
For now we just stick the CTL, SURF, and SURFLIVE (if available)
registers contents in there.
v2: Use struct intel_display instead of dev_priv
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-3-ville.syrjala@linux.intel.com
Try to keep all the low level skl+ universal plane register
details inside skl_universal_plane.c instead of having them
sprinkled all over the place.
v2: Rebase due to intel_display changes
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-10-ville.syrjala@linux.intel.com
Include the standard "[PLANE:%d:s]" stuff in all plane debugs
(or rather all I was able to find), to provide better information
on which plane we're actually talking about.
There are a few spots where we care about the CRTC as well, so
include that where appropriate.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-13-ville.syrjala@linux.intel.com
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the skl+ universal plane
code to use it.
Note that we still have two straggles in the form on
HAS_FLAT_CCS() and the pxp stuff.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-11-ville.syrjala@linux.intel.com
Pass intel_display to the display power stuff. These are spread
all over the place so tend to hinder clean conversions of whole
files.
TODO: The gt part/unpark power domain shenanigans need some
kind of more abstract interface...
v2: Deal with cmtg
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
Now that intel_scanout_needs_vtd_wa() is no longer used from
the gem code we can convert it to take struct intel_display.
which will help with converting the low level plane code over
as well.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Bspec lists different VT-d guard numbers (the number of dummy
padding PTEs) for different platforms and plane types. Use those
instead of just assuming the max glk+ number for everything.
This could avoid a bit of overhead on older platforms due to
reduced padding, and it makes it easier to cross check with the
spec.
Note that VLV/CHV do not document this w/a at all, so not sure
if it's actually needed or not. Nor do we actually know how much
padding is required if it is needed. For now use the same 128
PTEs that we use for snb-bdw primary planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we don't account for the VT-d alignment w/a in
plane->min_alignment() which means that panning inside a larger
framebuffer can still cause the plane SURF to be misaligned.
Fix the issue by moving the VT-d alignment w/a into
plane->min_alignment() itself (for the affected platforms).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fix all typos in files under drm/i915/display reported by codespell tool.
v2:
- Include british and american spelling, as those are
not typos.
- Fix commenting style. <Jani>
v3: Fix "In case" wrongly capitalized and
also fix comment style. <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-8-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Split skl_get_plane_caps() into four variants:
skl_plane_caps(), glk_plane_caps(), icl_plane_caps(),
tgl_plane_caps().
Makes it easier to figure out what is actually going on there.
v2: skl_plane_caps() should return u8 not bool
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010164617.10280-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Move the xe AUX neutering out from skl_get_plane_caps() into the
caller so that it'll be easier to refactor skl_get_plane_caps()
into a more readable shape. This isn't really hardware specific
anyway, and just some kind of bug/misfeature of xe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Async flips often require bigger alignment that sync flips.
Currently we have HAS_ASYNC_FLIPS() checks strewn about to
inidcate that async flips are generally supported and thus
we want more alignment. Switch that over to using
intel_plane_can_async_flip() so that we can handle these
in a slightly less messy way. Currently we don't have cases
where async flips would require different alignment for
different modifiers on the same plane.
We'll also move the HAS_ASYNC_FLIPS() check to the plane init
code so that we can still use that as a quick way to disable
the async flips workarounds for testing purposes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-5-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Looks like CCS + async flips has been a thing for a while now.
Enable this for TGL+ render compression modifiers.
Note that we can't update AUX_DIST during async flips we must
check to make sure it remains unchanged.
We also can't do clear color. Supposedly there was some attempt
to make it work, but apparently the issues only got ironed out
in MTL. For now we'll not worry about it and refuse async flips
with clear color modifiers.
Bspec claims that media compression doesn't support async flips.
Based on a quick test it does seem to work to some degree, but
perhaps it has issues as well. Let's trust the spec here and
continue to refuse async flips + media compression.
Bspec: 49250,49251,49252,49253
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Xe3 is capable of switching automatically to min ddb allocation
(not using any extra blocks) or interim SAGV-adjusted allocation
in case if async flip is used. Introduce the minimum and interim
ddb allocation configuration for that purpose. Also i915 is
replaced with intel_display within the patch's context
v2: update min/interim ddb declarations and handling (Ville)
update to register definitions styling
consolidation of minimal wm0 check with min DDB check
Bspec: 69880, 72053
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-4-vinod.govindapillai@intel.com
The async flip moved from PLANE_CTL to PLANE_SURF for Xe3_LPD.
Bspec: 69853,69878
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-7-clinton.a.taylor@intel.com
DISPLAY_VER >= 30 onwards CRTC can now support 6k resolution.
Increase pipe and plane max width and height to reflect this
increase in resolution.
--v2
-Take care of the subsampling scenario sooner rather than later [Matt]
--v3
-Take care of the joined pipe limits too [Ankit/Matt]
--v4
-Leave the joiner limits check here as is and handle them later [Ville]
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028074333.182041-2-suraj.kandpal@intel.com
We need to be able to do both MMIO and DSB based pipe/plane
programming. To that end plumb the 'dsb' all way from the top
into the plane commit hooks.
The compiler appears smart enough to combine the branches from
all the back-to-back register writes into a single branch.
So the generated asm ends up looking more or less like this:
plane_hook()
{
if (dsb) {
intel_dsb_reg_write();
intel_dsb_reg_write();
...
} else {
intel_de_write_fw();
intel_de_write_fw();
...
}
}
which seems like a reasonably efficient way to do this.
An alternative I was also considering is some kind of closure
(register write function + display vs. dsb pointer passed to it).
That does result is smaller code as there are no branches anymore,
but having each register access go via function pointer sounds
less efficient.
Not that I actually measured the overhead of either approach yet.
Also the reg_rw tracepoint seems to be making a huge mess of the
generated code for the mmio path. And additionally there's some
kind of IS_GSI_REG() hack in __raw_uncore_read() which ends up
generating a pointless branch for every mmio register access.
So looks like there might be quite a bit of room for improvement
in the mmio path still.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-12-ville.syrjala@linux.intel.com
