This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dba ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
Enable using a fractional (compressed) link bpp on MST links, if this is
supported and the link bpp is forced. Fractional link bpps will be
enabled by default as a follow-up change after testing this
functionality within a set of commonly used MST monitors and docks/hubs
which support it.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-13-imre.deak@intel.com
Add support for a fractional compressed link bpp on an MST link. Leave
the actual enabling of fractional bpps to a follow-up change.
While at it add an assert before the bpp loop, that the min and max bpps
are aligned to the bpp step. This should hold regardless of the non-DSC/DSC
or MST/UHBR-SST modes.
This keeps the mode validation and DSC->DPT BW specific maximum link
bpps as rounded-down integer values still, changing those to a
fractional value is left for later, add here TODO comments for them.
v2:
- Align the min/max bpp value to the bpp step.
- Assert that the min/max bpp values are aligned to the bpp step.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-9-imre.deak@intel.com
Adjusting the compressed bpp range min/max limits in
intel_dp_dsc_nearest_valid_bpp() is unnecessary:
- The source/sink min/max values are enforced already by the
link_config_limits::min_bpp_x16/max_bpp_x16 values computed early in
intel_dp_compute_config_link_bpp_limits().
- The fixed set of valid bpps are enforced already - for all bpps in the
min .. max range by intel_dp_dsc_valid_compressed_bpp() called from
intel_dp_mtp_tu_compute_config().
The only thing needed is limiting max compressed bpp below the
uncompressed pipe bpp, do that one thing only instead of calling
intel_dp_dsc_nearest_valid_bpp().
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-7-imre.deak@intel.com
Check the BW requirement of a selected compressed bpp against the total
MST link BW early. This didn't cause a problem, since all the BW limits
within the MST topology are checked during the later MST topology BW
check. However it doesn't make sense to defer the total link BW check,
since for resolving a BW limit issue due to this later also (a) requires
selecting a pipe to reduce its bpp, ending up reducing the bpp for
another pipe, which is not ideal (b) requires recomputing the state for
all CRTC/stream's in the topology which may slow down the commit
considerably (especially when using fractional bpps).
Based on the above, check a stream bpp's BW requirement against the MST
link's total BW early.
Ideally drm_dp_atomic_find_time_slots() should check internally the
corresponding PBN/TU slot BW against the total link BW, returning an
error if the check fails, however that change would also affect other
drivers, so leaving this for a follow-up.
v2: Rephrase description of pipe selection/bpp reduction in commit
message. (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-6-imre.deak@intel.com
A follow up change will check a selected bpp's BW requirement in
intel_dp_mtp_tu_compute_config(), however that requires the total link
slot count to be up-to-date. The latter in turn depends on the channel
encoding and hence the link rate used, so it can be set after the
link rate used is selected.
This also allows simplifying mst_stream_update_slots(), do that as well,
moving the function definition before its use.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-5-imre.deak@intel.com
Atm TGL supports only a fixed set of valid DSC compressed bpps
(6,8,10,12,15), but this is not taken into account while looking for a
bpp in the minimum..maximum compressed bpp range.
This happened to work only by chance since atm from the above min..max
range it's always the maximum bpp that is selected, which is one of the
above valid bpps (see mst_stream_dsc_compute_link_config() ->
intel_dp_dsc_nearest_valid_bpp()). Before selecting a bpp however, the
bpp's BW requirement should be checked wrt. to the MST total link BW;
after doing that - in a follow-up change - the validity of any bpp in
the min..max range must be ensured before the bpp is selected, do that
here.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-4-imre.deak@intel.com
A follow-up change wants to skip invalid bpps in the bpp select loop of
a stream state computation. To allow for that, using the usual
'continue' statement in the loop, change the way the single-bpp range is
handled.
v2: Fix typo in commit message. (Ankit)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-3-imre.deak@intel.com
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
Determining the SST/MST mode during state computation must be done based
on the output type stored in the CRTC state, which in turn is set once
based on the modeset connector's SST vs. MST type and will not change as
long as the connector is using the CRTC. OTOH the MST mode indicated by
the given connector's intel_dp::is_mst flag can change independently of
the above output type, based on what sink is at any moment plugged to
the connector.
Fix the state computation accordingly.
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: f6971d7427 ("drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4607
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250507151953.251846-1-imre.deak@intel.com
Minimum HBlank is programmed to address jitter for high resolutions with
high refresh rates that have small Hblank, specifically where Hblank is
smaller than one MTP.
TODO: Add the min_hblank calculation for hdmi as well.
v2: move from intel_audio.c to intel_dp.c
some correction in link_bpp_x16 (Imre)
v3: min_hblank for 8b/10b MST and 128b/132b SST/MST
handle error for intel_dp_mst_dsc_get_slice_count
reset min_hblank before disabling transcoder (Imre)
v4: compute link_bpp_x16 within compute_min_hblank,
return error in case of compute failure
call compute_min_hblank() before vrr_compute_config (Imre)
v5: readout MIN_HBLAN reg for Xe3+
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-2-8b002f1506cc@intel.com
With the PCH macros switched to use struct intel_display, we have a
number of files that no longer need struct drm_i915_private or anything
else from i915_drv.h anymore. Remove the #include, and add the missing
includes that were previously implicit.
v2: Drop even more of the includes
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_dp::mst.active_links actually indicates the number of MST streams,
not the number of MST links (one MST link carrying one or more MST
streams), rename the field accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-7-imre.deak@intel.com
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
Add helpers to increment/decrement the active MST stream count, instead
of open-coding these.
In mst_stream_pre_enable(), the increment will happen earlier, this is
ok, since nothing depends on the counter between the two points.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-3-imre.deak@intel.com
The intel_dp::link_trained flag indicates whether the link is active,
regardless of whether the link training passed or failed. For clarity
rename the flag to 'active'. While at it move the flag under
intel_dp::link.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
During modeset enable sequence, program the fixed timings, and turn on the
VRR Timing Generator (VRR TG) for platforms that always use VRR TG.
For this intel_vrr_set_transcoder now always programs fixed timings.
Later if vrr timings are required, vrr_enable() will switch
to the real VRR timings.
For platforms that will always use VRR TG, the VRR_CTL Enable bit is set
and reset in the transcoder enable/disable path.
v2: Update intel_vrr_set_transcoder_timings for fixed_rr.
v3: Update intel_set_transcoder_timings_lrr for fixed_rr. (Ville)
v4: Have separate functions to enable/disable VRR CTL
v5:
-For platforms that do not always have VRRTG on, do write bits other
than enable bit and also use write the TRANS_VRR_PUSH register. (Ville)
-Avoid writing trans_ctl_vrr if !vrr_possible().
v6:
-Disable VRR just before intel_ddi_disable_transcoder_func(). (Ville)
-Correct the sequence of configuring PUSH and VRR Enable/Disable. (Ville)
v7: Reset trans_vrr_ctl to 0 unconditionally in
intel_vrr_transcoder_disable(). (Ville)
v8: Reset trans_vrr_ctl if flipline is not set. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-9-ankit.k.nautiyal@intel.com
Currently the variable timings are supported only for DP and eDP and not
for DP MST. Call intel_vrr_compute_config() for MST which will configure
fixed refresh rate timings irrespective of whether VRR is supported or
not. Since vrr_capable still doesn't have support for DP MST this will be
just treated as non VRR case and vrr.vmin/vmax/flipline will be all set
to adjusted_mode->crtc_vtotal.
This will help to move away from the legacy timing generator and
always use VRR timing generator by default.
With this change, we need to exclude MST in intel_vrr_is_capable for
now, to avoid having LRR with MST.
v2: Exclude MST in intel_vrr_is_capable() for now. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-3-ankit.k.nautiyal@intel.com
Move active_mst_links, mst_encoders[], and mst_mgr members of struct
intel_dp under an mst sub-struct to group mst related things together.
Rename them active_links, stream_encoders[] and mgr for clarity.
Note that is_mst and mst_detect are not included, as they're also
relevant for non-mst. The sub-struct is for active mst.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6f282f90bfe2dd9162e2dee8f681c84313971992.1740746939.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
Since we have all the necessary bits in intel_connector.c might
as well always initialize the modeset_retry_work for every connector.
Avoids yet another init function you have to remember to call.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Disable the minimum HBlank time only on LNL+, where this functionality
and corresponding register exists.
Bspec: 74379
Fixes: a5ebe00c2a ("drm/i915/dp: Guarantee a minimum HBlank time")
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206164624.3185280-1-imre.deak@intel.com
The MST intel_connector::encoder pointer is NULL if the connector hasn't
been enabled before, so it can't be used to retrieve the display
pointer. Use instead the crtc_state and drop the unused connector
parameter.
v2: Use the crtc_state and drop the unused connector parameter.
Fixes: a5ebe00c2a ("drm/i915/dp: Guarantee a minimum HBlank time")
Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://lore.kernel.org/all/16754ee4cd21d99c1e81c5953134b496dd07630f.camel@intel.com
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com> #v1
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206001726.3021787-1-imre.deak@intel.com
intel_dp_mtp_tu_compute_config() conversion to use .4 fixed point didn't
take into account that intel_dp_mst_max_dpt_bpp() may return INT_MAX
when the transport limitation is not relevant. Converting INT_MAX to .4
fixed point results in -1.0, which then gets used as if it were a real
max BPP value:
i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Limiting bpp to max DPT bpp (24.0000 -> -1.0000)
i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Looking for slots in range min bpp 18.0000 max bpp -1.0000
Just return 0 for "no max DPT BPP", and handle it explicitly.
Fixes: 67782bf6e8 ("drm/i915/mst: Convert intel_dp_mtp_tu_compute_config() to .4 format")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13624
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204153717.2996923-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mandate a minimum Hblank symbol cycle count between BlankingStart and
BlankingEnd in 8b/10b MST and 128b/132b mode.
v2: Affine calculation/updation of min HBlank to dp_mst (Jani)
v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani)
v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx
(Jani)
Limit hblank to 511 and accommodate BS/BE in calculated value
(Srikanth)
v5: Some spelling corrections (Suraj)
v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and
DP1.4 (Suraj)
v7: crtc_state holds the logical values and the register value
computation is moved to mst_enable() (Jani)
v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
Semantically mst_stream_find_vcpi_slots_for_bpp() does not seem like the
place to make decisions about lane_count and port_clock. Move them to
the callers, and remove the limits parameter that becomes unused.
This leads to slight duplication, but a) this makes further refactoring
easier, and b) also the SST code sets link parameters in different
places for uncompressed and compressed paths.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/101ce3fc6afff55d966336f3ab72090317750f82.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix all typos in files under drm/i915/display reported by codespell tool.
v2:
- Include british and american spelling, as those are
not typos.
- Fix commenting style. <Jani>
v3: Fix "In case" wrongly capitalized and
also fix comment style. <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-8-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Simplify getting a drm_device pointer when using to_i915() in
intel_dp_mst.c from the already available intel_display object, instead
of getting it from a DRM KMS object.
While at it rename dev_priv to i915, following the driver's standard
terminology.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-5-imre.deak@intel.com
