Encapsulate the struct intel_framebuffer into an xe_framebuffer
or i915_framebuffer, and allow to add specific fields for each
variant for the panic use-case.
This is particularly needed to have a struct xe_res_cursor available
to support drm panic on discrete GPU.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-7-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-4-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.
v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
move changes in can_async_flip to new patch (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
I want to capture a little bit more information about the state
of the plane upon faults. To that end introduce a small plane error
state struct and provide per-plane vfuncs to read it out.
For now we just stick the CTL, SURF, and SURFLIVE (if available)
registers contents in there.
v2: Use struct intel_display instead of dev_priv
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-3-ville.syrjala@linux.intel.com
Include the standard "[PLANE:%d:s]" stuff in all plane debugs
(or rather all I was able to find), to provide better information
on which plane we're actually talking about.
There are a few spots where we care about the CRTC as well, so
include that where appropriate.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-13-ville.syrjala@linux.intel.com
Pass intel_display to the display power stuff. These are spread
all over the place so tend to hinder clean conversions of whole
files.
TODO: The gt part/unpark power domain shenanigans need some
kind of more abstract interface...
v2: Deal with cmtg
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
Now that intel_scanout_needs_vtd_wa() is no longer used from
the gem code we can convert it to take struct intel_display.
which will help with converting the low level plane code over
as well.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Bspec lists different VT-d guard numbers (the number of dummy
padding PTEs) for different platforms and plane types. Use those
instead of just assuming the max glk+ number for everything.
This could avoid a bit of overhead on older platforms due to
reduced padding, and it makes it easier to cross check with the
spec.
Note that VLV/CHV do not document this w/a at all, so not sure
if it's actually needed or not. Nor do we actually know how much
padding is required if it is needed. For now use the same 128
PTEs that we use for snb-bdw primary planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Depending on the platform and/or plane type we can get away
with a bit less alignment in the VT-d w/a. Reduce the numbers
accordingly.
Note that it's not actually clear in VLV/CHV need this w/a,
and if they do we don't actually know what kind of alignment
is sufficient. Leave the 256k alignment in place for now, but
toss in a FIXME.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we don't account for the VT-d alignment w/a in
plane->min_alignment() which means that panning inside a larger
framebuffer can still cause the plane SURF to be misaligned.
Fix the issue by moving the VT-d alignment w/a into
plane->min_alignment() itself (for the affected platforms).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename vlv_primary_min_alignment() to vlv_plane_min_alignment()
and use it to replace vlv_sprite_min_alignment() since the
behaviour is now identical when the plane init doesn't set up
any async flips stuff.
Technically VLV/CHV sprites do support async flips, so this
also makes us a bit more future proof if/when we extend async
flip support to more than one plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Async flips often require bigger alignment that sync flips.
Currently we have HAS_ASYNC_FLIPS() checks strewn about to
inidcate that async flips are generally supported and thus
we want more alignment. Switch that over to using
intel_plane_can_async_flip() so that we can handle these
in a slightly less messy way. Currently we don't have cases
where async flips would require different alignment for
different modifiers on the same plane.
We'll also move the HAS_ASYNC_FLIPS() check to the plane init
code so that we can still use that as a quick way to disable
the async flips workarounds for testing purposes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-5-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Add to_intel_uncore() function to avoid the inclusion of i915_drv.h from
intel_de.h. This reveals a number of implicit dependencies on i915_drv.h
that need to be added.
For now, to_intel_uncore() can be an inline function, with all the
includes in compat intel_uncore.h, as long as i915_drv.h isn't
included. The implicit dependencies on i915_drv.h is a problem in
display code, but the same is not true for xe_device.h etc.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/377e2b400d126776224fc49874ed9cb03ac3123c.1732104170.git.jani.nikula@intel.com
We need to be able to do both MMIO and DSB based pipe/plane
programming. To that end plumb the 'dsb' all way from the top
into the plane commit hooks.
The compiler appears smart enough to combine the branches from
all the back-to-back register writes into a single branch.
So the generated asm ends up looking more or less like this:
plane_hook()
{
if (dsb) {
intel_dsb_reg_write();
intel_dsb_reg_write();
...
} else {
intel_de_write_fw();
intel_de_write_fw();
...
}
}
which seems like a reasonably efficient way to do this.
An alternative I was also considering is some kind of closure
(register write function + display vs. dsb pointer passed to it).
That does result is smaller code as there are no branches anymore,
but having each register access go via function pointer sounds
less efficient.
Not that I actually measured the overhead of either approach yet.
Also the reg_rw tracepoint seems to be making a huge mess of the
generated code for the mmio path. And additionally there's some
kind of IS_GSI_REG() hack in __raw_uncore_read() which ends up
generating a pointless branch for every mmio register access.
So looks like there might be quite a bit of room for improvement
in the mmio path still.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-12-ville.syrjala@linux.intel.com
Different hardware generations have different scanout alignment
requirements. Introduce a new vfunc that will allow us to
make that distinction without horrible if-ladders.
For now we directly plug in the existing intel_surf_alignment()
and intel_cursor_alignment() functions.
For fbdev we (temporarily) introduce intel_fbdev_min_alignment()
that simply queries the alignment from the primary plane of
the first crtc.
TODO: someone will need to fix xe's alignment handling
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-4-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Be a bit more consistent in our use of integer types in
the fb related calculatiosn. u32 we generally only use
for ggtt offsets and such, and everything else can be regular
(unsigned) ints.
There's also an overabundance of consts for local variables
in skl_check_main_surface() which is not something we generally
do. So get rid of those while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506125718.26001-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Plane .max_stride() is already a vfunc so having one made
up of two branches based on the display version is silly.
Split i9xx_plane_max_stride() into gen2 vs. gen3 variants
so that we get rid of said check.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506125718.26001-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename need_async_flip_disable_wa to need_async_flip_toggle_wa to
better reflect the fact that we need to deal with the bad
PLANE_CTL_ASYNC_FLIP double buffering behaviour going both
ways.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430095639.26390-6-ville.syrjala@linux.intel.com
On bdw-glk the sync->async flip change takes an extra frame due to
the double buffering behaviour of the async flip plane control bit.
Since on skl+ we are now explicitly converting the first async flip
to a sync flip (in order to allow changing the modifier and/or
ddb/watermarks) we are now taking two extra frames until async flips
are actually active. We can drop that back down to one frame by
setting the async flip bit already during the sync flip.
Note that on bdw we don't currently do the extra sync flip (see
intel_plane_do_async_flip()) so technically we wouldn't have
to deal with this in i9xx_plane_update_arm(). But I added the
relevant snippet of code there as well, just in case we ever
decide to go for the extra sync flip on pre-skl platforms as
well (we might, for example, want to change the fb stride).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430095639.26390-5-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
On MTL the GOP (for whatever reason) likes to bind its framebuffer
high up in the ggtt address space. This can conflict with whatever
ggtt_reserve_guc_top() is trying to do, and the result is that
ggtt_reserve_guc_top() fails and then we proceed to explode when
trying to tear down the driver. Thus far I haven't analyzed what
causes the actual fireworks, but it's not super important as even
if it didn't explode we'd still fail the driver load and the user
would be left with an unusable GPU.
To remedy this (without having to figure out exactly what
ggtt_reserve_guc_top() is trying to achieve) we can attempt to
relocate the BIOS framebuffer to a lower ggtt address. We can do
this at this early point in driver init because nothing else is
supposed to be clobbering the ggtt yet. So we simply change where
in the ggtt we pin the vma, the original PTEs will be left as is,
and the new PTEs will get written with the same dma addresses.
The plane will keep on scanning out from the original PTEs until
we are done with the whole process, and at that point we rewrite
the plane's surface address register to point at the new ggtt
address.
Since we don't need a specific ggtt address for the plane
(apart from needing it to land in the mappable region for
normal stolen objects) we'll just try to pin it without a fixed
offset first. It should end up at the lowest available address
(which really should be 0 at this point in the driver init).
If that fails we'll fall back to just pinning it exactly to the
origianal address.
To make sure we don't accidentlally pin it partially over the
original ggtt range (as that would corrupt the original PTEs)
we reserve the original range temporarily during this process.
v2: Try to pin explicitly to ggtt offset 0 as otherwise DG2 puts it
even higher (atm we have no PIN_LOW flag to force it low)
v3: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-16-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Split out frontbuffer related declarations and static inlines from
gem/i915_gem_object.h into new gem/i915_gem_object_frontbuffer.h.
The main goal is to reduce header interdependencies. With
gem/i915_gem_object.h including display/intel_frontbuffer.h,
modification of the latter causes a whopping 300+ objects to be rebuilt,
while many of the source files actually needing it aren't explicitly
including it at all.
After the change, only 21 objects depend on display/intel_frontbuffer.h,
directly or indirectly.
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830085127.2416842-1-jani.nikula@intel.com
We assume the plane offset is 0. Warn if it's not. This also fixes a
warn on unused but set variable offset.
v2: initialize offset on the gen2/3 path (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526172218.1597394-1-jani.nikula@intel.com
Split (non-hotplug) display irq handling out of i915_irq.[ch] into
display/intel_display_irq.[ch].
v3:
- Preserve [I915_MAX_PIPES] harder (kernel test robot)
v2:
- Rebase
- Preserve [I915_MAX_PIPES] in functions (kernel test robot)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-3-jani.nikula@intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
