mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-31 23:27:20 +00:00
783 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Ville Syrjälä
|
4a792c5920 |
drm/gma500: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. For the fbdev case a manual drm_get_format_info() lookup is needed. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-13-ville.syrjala@linux.intel.com |
||
|
Ville Syrjälä
|
a34cc7bf10 |
drm: Allow the caller to pass in the format info to drm_helper_mode_fill_fb_struct()
Soon all drivers should have the format info already available in the
places where they call drm_helper_mode_fill_fb_struct(). Allow it to
be passed along into drm_helper_mode_fill_fb_struct() instead of doing
yet another redundant lookup.
Start by always passing in NULL and still doing the extra lookup.
The actual changes to avoid the lookup will follow.
Done with cocci (with some manual fixups):
@@
identifier dev, fb, mode_cmd;
expression get_format_info;
@@
void drm_helper_mode_fill_fb_struct(struct drm_device *dev,
struct drm_framebuffer *fb,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
...
- fb->format = get_format_info;
+ fb->format = info ?: get_format_info;
...
}
@@
identifier dev, fb, mode_cmd;
@@
void drm_helper_mode_fill_fb_struct(struct drm_device *dev,
struct drm_framebuffer *fb,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd);
@@
expression dev, fb, mode_cmd;
@@
drm_helper_mode_fill_fb_struct(dev, fb
+ ,NULL
,mode_cmd);
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux.dev
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-6-ville.syrjala@linux.intel.com
|
||
|
Ville Syrjälä
|
81112eaac5 |
drm: Pass the format info to .fb_create()
Pass along the format information from the top to .fb_create()
so that we can avoid redundant (and somewhat expensive) lookups
in the drivers.
Done with cocci (with some manual fixups):
@@
identifier func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
...
(
- const struct drm_format_info *info = drm_get_format_info(...);
|
- const struct drm_format_info *info;
...
- info = drm_get_format_info(...);
)
<...
- if (!info)
- return ...;
...>
}
@@
identifier func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
...
}
@find@
identifier fb_create_func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *fb_create_func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd);
@@
identifier find.fb_create_func;
expression dev, file, mode_cmd;
@@
fb_create_func(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file, mode_cmd;
@@
drm_gem_fb_create(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file, mode_cmd;
@@
drm_gem_fb_create_with_dirty(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file_priv, mode_cmd;
identifier info, fb;
@@
info = drm_get_format_info(...);
...
fb = dev->mode_config.funcs->fb_create(dev, file_priv
+ ,info
,mode_cmd);
@@
identifier dev, file_priv, mode_cmd;
@@
struct drm_mode_config_funcs {
...
struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
struct drm_file *file_priv,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd);
...
};
v2: Fix kernel docs (Laurent)
Fix commit msg (Geert)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: "Maíra Canal" <mcanal@igalia.com>
Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
|
||
|
Ville Syrjälä
|
0e7d5874fb |
drm: Pass pixel_format+modifier directly to drm_get_format_info()
Decouple drm_get_format_info() from struct drm_mode_fb_cmd2 and just
pass the pixel format+modifier combo in by hand.
We may want to use drm_get_format_info() outside of the normal
addfb paths where we won't have a struct drm_mode_fb_cmd2, and
creating a temporary one just for this seems silly.
Done with cocci:
@@
identifier dev, mode_cmd;
@@
struct drm_format_info *
drm_get_format_info(struct drm_device *dev,
- const struct drm_mode_fb_cmd2 *mode_cmd
+ u32 pixel_format, u64 modifier
)
{
<...
(
- mode_cmd->pixel_format
+ pixel_format
|
- mode_cmd->modifier[0]
+ modifier
)
...>
}
@@
identifier dev, mode_cmd;
@@
struct drm_format_info *
drm_get_format_info(struct drm_device *dev,
- const struct drm_mode_fb_cmd2 *mode_cmd
+ u32 pixel_format, u64 modifier
);
@@
expression dev, mode_cmd;
@@
- drm_get_format_info(dev, mode_cmd)
+ drm_get_format_info(dev, mode_cmd->pixel_format, mode_cmd->modifier[0])
v2: Fix kernel docs (Laurent)
Drop drm_mode_fb_cmd2 forward declaration (Thomas)
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-3-ville.syrjala@linux.intel.com
|
||
|
Alistair Popple
|
21aa65bf82 |
mm: remove callers of pfn_t functionality
All PFN_* pfn_t flags have been removed. Therefore there is no longer a need for the pfn_t type and all uses can be replaced with normal pfns. Link: https://lkml.kernel.org/r/bbedfa576c9822f8032494efbe43544628698b1f.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Björn Töpel <bjorn@rivosinc.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Alistair Popple
|
79065255ab |
mm: remove remaining uses of PFN_DEV
PFN_DEV was used by callers of dax_direct_access() to figure out if the returned PFN is associated with a page using pfn_t_has_page() or not. However all DAX PFNs now require an assoicated ZONE_DEVICE page so can assume a page exists. Other users of PFN_DEV were setting it before calling vmf_insert_mixed(). This is unnecessary as it is no longer checked, instead relying on pfn_valid() to determine if there is an associated page or not. Link: https://lkml.kernel.org/r/74b293aebc21b941090bc3e7aeafa91b57c821a5.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Björn Töpel <bjorn@rivosinc.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
3719a04a80 |
pci-v6.16-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmhAa9EUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vyA3w//aX8d73z/xVxkYLMN/6XQA5fdmd4d
Dv4n0Pjf0WCMKbsgRCdXEYLvcHV8VhH5iCR/b2UsFm9LjxSIRuqE5XosY3bNhrHn
xVKEh2prq2XZOibWrFkJ+RZ0FF7Ogq1Uy5gUBbBHbE1q1byZzrOALaF3FWGaDIZQ
6QLLAFtd3UtqOOUu8J8P9N15uFR8gunyfuM9U7TLMcy4B8txk6T6m/9xAWtRURuJ
I6WN8lO+g8Nl2mL9m27+wyWiVT3tKqoMwp8rVtym/L5JQOmHycYhn0WQAr2dPCMs
Xbgmoeei0je7mZvk5btpt68NAKQ3ZnCVkxbbINBkUxAjI0dbI6h37EhW18ShYVUk
CCo4fmaFtwP8qNN9tSvDN8vZdGB44fN5tIz4lmGzKk5gt+oV50RC/APrzC+PJBQ0
+2SdDVKj71Gr2H1VnI6uLB7oQ+tp7TOdhg+DGV4bdc6QFnsM+BpKWRq5f1UQcau/
XVDmorM/2t6z0DNktAv3NFwSodUjk1loWESr/pRBH1AqAWZTK98PWIg97XYsal59
zbJ3dLrnCqUNozeVgjtZo1LWD2FZaVTvhq2NY7D+QPpnMGhFUhHxNliZUXiQa1q4
boI2hEFdu3IQP/OC2a1zGJyMRLU43d5rhZ1U5xQSVtM0c3lgCY7rn/t26LymQVPA
SYdg2jBcnhe6gXo=
=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
|
||
|
Arnd Bergmann
|
8fe743b5eb |
PCI: Add CONFIG_MMU dependency
It turns out that there are no platforms that have PCI but don't have an MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing kernels for those platforms a lot, and avoids a lot of inadvertent build regressions. Add a dependency for CONFIG_PCI and remove all the ones for PCI specific device drivers that are currently marked not having it. There are a few platforms that have an optional MMU, but they usually cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is mainly for historic reasons, and anyone using those chips should really use the MMU these days. Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org |
||
|
Thomas Zimmermann
|
1afba39f93 |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Linus Torvalds
|
0c86b42439 |
drm for 6.15-rc1
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
||
|
Dr. David Alan Gilbert
|
12ec4f30fc |
drm/gma500: Remove unused psb_mmu_virtual_to_pfn
psb_mmu_virtual_to_pfn() was added in 2011 by
commit
|
||
|
Dr. David Alan Gilbert
|
629067565c |
drm/gma500/psb_intel_modes: Remove unused psb_intel_ddc_probe
psb_intel_ddc_probe() was added in 2011 by
commit
|
||
|
Dr. David Alan Gilbert
|
9249a900fe |
drm/gma500: Remove unused mrst_clock_funcs
The mrst_clock_funcs const was added in 2013 by
commit
|
||
|
Ivan Abramov
|
9af152dcf1 |
drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data()
Since pci_get_domain_bus_and_slot() can return NULL, add NULL check for pci_gfx_root in the mid_get_vbt_data(). This change is similar to the checks implemented in mid_get_fuse_settings() and mid_get_pci_revID(), which were introduced by commit |
||
|
Charles Han
|
4423e607ff |
drm/gma500: fix inconsistent indenting warning
Fix below inconsistent indenting smatch warning. smatch warnings: drivers/gpu/drm/gma500/cdv_device.c:218 cdv_errata() warn: inconsistent indenting Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250305084911.6394-1-hanchunchao@inspur.com |
||
|
Thorsten Blum
|
ce43cf3477 |
drm/gma500: Replace deprecated strncpy() with strscpy()
strncpy() is deprecated for NUL-terminated destination buffers. Use strscpy() instead and remove the manual NUL-termination. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250225203932.334123-1-thorsten.blum@linux.dev |
||
|
Dmitry Baryshkov
|
26d6fd8191 |
drm/connector: make mode_valid take a const struct drm_display_mode
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge take a const struct drm_display_mode argument. Change the mode_valid callback of drm_connector to also take a const argument. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
||
|
Jani Nikula
|
cb2e1c2136 |
drm: remove driver date from struct drm_driver and all drivers
We stopped using the driver initialized date in commit
|
||
|
Maxime Ripard
|
3aba2eba84
|
Merge drm/drm-next into drm-misc-next
Kickstart 6.14 cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Linus Torvalds
|
28eb75e178 |
drm for 6.13-rc1
core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+ -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmc+efwACgkQDHTzWXnE hr6Dyg/9HVVI3lxuWAz9MEt3w+BON5KTJAxg5Zhvc5DwiUbDXghu8sfkUfanDWS5 /MqyPqLt5srXrtKTRDnzEI0Vf8YHeiDEcaydjpshEpCfteHZ7SADpvem8fp6/otV iYt8U6tMcGe9I+M2kwDkOTrKJIiyCKPi5hfBIAkxEAh6806ifPRtLkeMGbaSwBxH x6kZTE9ygGWAY7bAgbmVmm3JwrXG9mYDl9dW3cbi9gZ6PGAXHPZRUPvZoHhvfC2A UVgROH76Spm4rdWYGI3azj+gW3HsdGgUHcysb+lu37i261E+sT7kuV2UYtnOMzr5 igO1RlQ+rcfPYLG4n+oNXDMu5d1OQXELrlQzXptym4Konpd7b/GSeVctWV0wHWuv nG8g7DWAFFnLAdeWqLZpf1Brze33h5+572D3BioWB4LYSEATjwoTwcBKsdRuc4Wk RHxjumCidybTdo/8EB1ElGlH39m/mDQA0scMlVhS/BuiIssfgcBRfltI8S3HzHcW YQYq6xH7F9E3shs3/TYbWR4clm66ZTnZV6ClDfGJolzyF/hbV0rsbeSpDelpooE8 1Js7KuwVa+HvA4jtupY9vqxMTdXWwoGPfuUgKpOAreYibnd1T9Q1zVme/B1bUH05 518IjiMGCxDnBvFWaPT9DcX4zg7pS3yzjw3hGkdz3reUqat0Gy8= =8cUI -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ... |
||
|
Thomas Zimmermann
|
b86711c6d6 |
drm/client: Move public client header to clients/ subdirectory
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de |
||
|
Niklas Schnelle
|
f663c6ae36
|
drm: handle HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them. In the bochs driver there is optional MMIO support detected at runtime, warn if this isn't taken when HAS_IOPORT is not defined. There is also a direct and hard coded use in cirrus.c which according to the comment is only necessary during resume. Let's just skip this as for example s390 which doesn't have I/O port support also doesen't support suspend/resume. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> # xe Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Dave Airlie
|
54bc1d3255 |
Merge tag 'drm-misc-next-2024-09-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13: UAPI Changes: - panthor: Add realtime group priority and priority query. Cross-subsystem Changes: - Add Vivek Kasireddy as udmabuf maintainer. - Assorted udmabuf changes. - Device tree binding updates. - dmabuf documentation fixes. - Move drm_rect to drm core module from kms helper. Core Changes: - Update scheduler documentation and concurrency fixes. - drm/ci updates. - Add memory-agnostic fbdev client and client-agnostic setup helper. - Huge driver conversion for using the above. Driver Changes: - Assorted fixes to imx, panel/nt35510, sti, accel/ivpu, v3d, vkms, host1x. - Add panel quirks for AYA NEO panels. - Make module autoloading work for bridge/it6505 and mcde. - Add huge page support to v3d using a custom shmfs. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a9b95e6f-9f35-464e-83f6-bda75b35ee0b@linux.intel.com |
||
|
Thomas Zimmermann
|
2dd0ef5d95 |
Merge drm/drm-next into drm-misc-next
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Thomas Zimmermann
|
aecdbfe459 |
drm/gma500: Run DRM default client setup
Rework fbdev probing to support fbdev_probe in struct drm_driver and remove the old fb_probe callback. Provide an initializer macro for struct drm_driver that sets the callback according to the kernel configuration. Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-76-tzimmermann@suse.de |
||
|
Linus Torvalds
|
de848da12f |
drm next for 6.12-rc1
string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler; - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: support Innolux G070ACE-LH3 plus DT bindings support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: decouple DSI and DRM code add SPI support support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: Support RGB display on Rockchip RK3066; Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmbq43gACgkQDHTzWXnE hr4+lg/+O/r41E7ioitcM0DWeWem0dTlvQr41pJ8jujHvw+bXNdg0BMGWtsTyTLA eOft2AwofsFjg+O7l8IFXOT37mQLdIdfjb3+w5brI198InL3OWC3QV8ZSwY9VGET n8crO9jFoxNmHZnFniBZbtI6egTyl6H+2ey3E0MTnKiPUKZQvsK/4+x532yVLPob UUOze5wcjyGZc7LJEIZPohPVneCb9ki7sabDQqh4cxIQ0Eg+nqPpWjYM4XVd+lTS 8QmssbR49LrJ7z9m90qVE+8TjYUCn+ChDPMs61KZAAnc8k++nK41btjGZ23mDKPb YEguahCYthWJ4U8K18iXBPnLPxZv5+harQ8OIWAUYqdIOWSXHozvuJ2Z84eHV13a 9mQ5vIymXang8G1nEXwX/vml9uhVhBCeWu3qfdse2jfaTWYUb1YzhqUoFvqI0R0K 8wT03MyNdx965CSqAhpH5Jd559ueZmpd+jsHOfhAS+1gxfD6NgoPXv7lpnMUmGWX SnaeC9RLD4cgy7j2Swo7TEqQHrvK5XhZSwX94kU6RPmFE5RRKqWgFVQmwuikDMId UpNqDnPT5NL2UX4TNG4V4coyTXvKgVcSB9TA7j8NSLfwdGHhiz73pkYosaZXKyxe u6qKMwMONfZiT20nhD7RhH0AFnnKosAcO14dhn0TKFZPY6Ce9O8= =7jR+ -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ... |
||
|
Christian Brauner
|
641bb4394f |
fs: move FMODE_UNSIGNED_OFFSET to fop_flags
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Daniel Vetter
|
91dae758bd |
drm-misc-next for v6.12:
UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmareygACgkQaA3BHVML eiO2vwf9FirbMiq4lfHzgcbNIU1dTUtjRAZjrlwGmqk5cb9lUshAMCMBMOEQBDdg XMQQj/RMBvRUuxzsPGk78ObSz5FBaBLgKwFprer0V6uslQaJxj4YRsnkp0l2n+0k +ebhfo2rUgZOdgNOkXH326w9UhqiydIa7GaA2aq1vUzXKFDfvGXtSN75BMlEWlKP rTft56AiwjwcKu7zYFHGlFUMSNpKAQy7lnV3+dBXAfFNHu4zVNoI/yWGEOdR7eVo WhiEcpvismsOh+BfUvMNPP3RKwjXHdwMlJYb+v9XGgH27hqc50lSceWydHtoJTto DTXF9WQhJ+/GQR9ZGmBjos9GVbECDA== =L/1W -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box |
||
|
Easwar Hariharan
|
0c3f3a83c7 |
drm/gma500: Make I2C terminology more inclusive
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave" with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/, fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240711052734.1273652-3-eahariha@linux.microsoft.com |
||
|
Linus Torvalds
|
b3ce7a3084 |
drm next for 6.11-rc1:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
||
|
Ma Ke
|
cb520c3f36 |
drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes
In cdv_intel_lvds_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Ma Ke
|
2df7aac810 |
drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes
In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Maxime Ripard
|
375c4d1583
|
Merge drm/drm-next into drm-misc-next
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Colin Ian King
|
0fe113ad47 |
drm/gma500: Fix spelling mistake "patter" -> "pattern"
There is a spelling mistake in a DRM_DEBUG_KMS message. Fix it. Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240314163511.2372458-1-colin.i.king@gmail.com |
||
|
Daniel Vetter
|
b84bc94852 |
Linux 6.9-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYutdweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGG5oH/3Ggwz5N+gdEK3np qxUfpgJTWo+fJ6xhRLGy84TnEZ9s9UnK0Su6UuVyOb0F/2Y8hesJ6iwB16yQFKNe Nore/VvuBZ+utshz5N20yNyPugNOP74GGbyOm+d+iJwIKnmSE8jSjWyMwNFHJCZM BfoBxZrpwU/YD/0PD1KkI44jhPX1H/EcEmtNiklLnuYvJydTWiRFeku+CSgcOiRz 6fIFrcZMREZrAytMQSwteBAvI3vWblC0S39ZgJmtZt+oi+s1ksIUNG8Mm5uMAiyF LcGep2tWV06x9uB9XVvrk0qco/kOaUgYuQrHQwNu9LzsaUdYGKqBBMk41SoNXFkB hBXN26U= =N2E2 -----END PGP SIGNATURE----- Merge v6.9-rc6 into drm-next Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas has some fun with i915-gem conflicts. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|
Kent Overstreet
|
0069455bcb |
fix missing vmalloc.h includes
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Patrik Jakobsson
|
6aff4c26ed |
drm/gma500: Remove lid code
Due to a change in the order of initialization, the lid timer got
started before proper setup was made. This resulted in a crash during
boot.
The lid switch is handled by gma500 through a timer that periodically
polls the opregion for changes. These types of ACPI events shouldn't be
handled by the graphics driver so let's get rid of the lid code. This
fixes the crash during boot.
Reported-by: Enrico Bartky <enrico.bartky@gmail.com>
Fixes:
|
||
|
Andy Shevchenko
|
3d2360464b |
drm/gma500: Remove unused intel-mid.h
intel-mid.h is providing some core parts of the South Complex PM, which are usually are not used by individual drivers. In particular, this driver doesn't use it, so simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305160902.1363835-1-andriy.shevchenko@linux.intel.com |
||
|
Heiner Kallweit
|
e965a70727 |
drm: remove I2C_CLASS_DDC support
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
||
|
Justin Stitt
|
9edb071c8b |
drm/gma500: refactor deprecated strncpy
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. We should prefer more robust and less ambiguous string interfaces. Since `chan->base.name` is expected to be NUL-terminated, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without also unnecessarily NUL-padding (since `chan` is kzalloc'd already). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230919-drivers-gpu-drm-gma500-oaktrail_lvds_i2c-c-v2-1-9ebe6983b4cb@google.com |
||
|
Yue Haibing
|
17c35883cf |
drm/gma500: Remove unused declarations
These declarations are not implemented now, remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230817133754.36524-1-yuehaibing@huawei.com |
||
|
Sui Jingfeng
|
da596080b2 |
drm/gma500: Fix call trace when psb_gem_mm_init() fails
Because the gma_irq_install() is call after psb_gem_mm_init() function, when psb_gem_mm_init() fails, the interrupt line haven't been allocated. Yet the gma_irq_uninstall() is called in the psb_driver_unload() function without checking if checking the irq is registered or not. The calltrace is appended as following: [ 20.539253] ioremap memtype_reserve failed -16 [ 20.543895] gma500 0000:00:02.0: Failure to map stolen base. [ 20.565049] ------------[ cut here ]------------ [ 20.565066] Trying to free already-free IRQ 16 [ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370 [ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368 [ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013 [ 20.565338] RIP: 0010:free_irq+0x209/0x370 [ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78 [ 20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046 [ 20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000 [ 20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000 [ 20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100 [ 20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200 [ 20.565424] FS: 00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000 [ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0 [ 20.565450] Call Trace: [ 20.565458] <TASK> [ 20.565470] ? show_regs+0x72/0x90 [ 20.565488] ? free_irq+0x209/0x370 [ 20.565504] ? __warn+0x8d/0x160 [ 20.565520] ? free_irq+0x209/0x370 [ 20.565536] ? report_bug+0x1bb/0x1d0 [ 20.565555] ? handle_bug+0x46/0x90 [ 20.565572] ? exc_invalid_op+0x19/0x80 [ 20.565587] ? asm_exc_invalid_op+0x1b/0x20 [ 20.565607] ? free_irq+0x209/0x370 [ 20.565625] ? free_irq+0x209/0x370 [ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx] [ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx] [ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx] [ 20.565873] local_pci_probe+0x48/0xb0 [ 20.565892] pci_device_probe+0xc8/0x280 [ 20.565912] really_probe+0x1d2/0x440 [ 20.565929] __driver_probe_device+0x8a/0x190 [ 20.565944] driver_probe_device+0x23/0xd0 [ 20.565957] __driver_attach+0x10f/0x220 [ 20.565971] ? __pfx___driver_attach+0x10/0x10 [ 20.565984] bus_for_each_dev+0x7a/0xe0 [ 20.566002] driver_attach+0x1e/0x30 [ 20.566014] bus_add_driver+0x127/0x240 [ 20.566029] driver_register+0x64/0x140 [ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx] [ 20.566111] __pci_register_driver+0x68/0x80 [ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx] [ 20.566194] do_one_initcall+0x46/0x330 [ 20.566214] ? kmalloc_trace+0x2a/0xb0 [ 20.566233] do_init_module+0x6a/0x270 [ 20.566250] load_module+0x207f/0x23a0 [ 20.566278] init_module_from_file+0x9c/0xf0 [ 20.566293] ? init_module_from_file+0x9c/0xf0 [ 20.566315] idempotent_init_module+0x184/0x240 [ 20.566335] __x64_sys_finit_module+0x64/0xd0 [ 20.566352] do_syscall_64+0x59/0x90 [ 20.566366] ? ksys_mmap_pgoff+0x123/0x270 [ 20.566378] ? __secure_computing+0x9b/0x110 [ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190 [ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50 [ 20.566420] ? do_syscall_64+0x69/0x90 [ 20.566433] ? do_syscall_64+0x69/0x90 [ 20.566445] ? do_syscall_64+0x69/0x90 [ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 20.566472] RIP: 0033:0x7f13d351ea3d [ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48 [ 20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d [ 20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010 [ 20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441 [ 20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0 [ 20.566559] </TASK> [ 20.566566] ---[ end trace 0000000000000000 ]--- Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn |
||
|
Jorge Maidana
|
afcacac4be |
drm/gma500: remove duplicate macro definitions
Remove identical duplicate block of macro definitions in drivers/gpu/drm/gma500/psb_drv.h. Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230725173107.9593-1-jorgem.linux@gmail.com |
||
|
Thomas Zimmermann
|
4520844b44 |
fbdev: Use _IOMEM_ infix for I/O-memory helpers
Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_ to distiguish them from other types of I/O, such as file operations. The helpers operate on memory ranges in the I/O address space and the naming should make this clear. Adapt all users. No functional changes. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-2-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
40e324e0d8 |
drm: Remove flag FBINFO_DEFAULT from fbdev emulation
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-2-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
27655b9bb9 |
drm/client: Send hotplug event after registering a client
Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit |
||
|
Thomas Zimmermann
|
7fca1dd909 |
drm/gma500: Use regular fbdev I/O helpers
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Gma500 does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-6-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
aa25aacc3e |
drm/gma500: Clear fbdev framebuffer with fb_memset_io()
The fbdev framebuffer is I/O memory, so clear it with fb_memset_io(). Fixes the following sparse warning: ../drivers/gpu/drm/gma500/fbdev.c:234:20: warning: incorrect type in argument 1 (different address spaces) ../drivers/gpu/drm/gma500/fbdev.c:234:20: expected void *s ../drivers/gpu/drm/gma500/fbdev.c:234:20: got char [noderef] __iomem *screen_base Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522190637.7039-1-tzimmermann@suse.de |