Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts between
clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on hardware
with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call
-----BEGIN PGP SIGNATURE-----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=5h1C
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk
uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ
JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8=
=+5Bq
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
[1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions
Fixes: 757b435aaa ("efi: arm64: Add vmlinux debug link to the Image binary")
Fixes: a050910972 ("efi/libstub: implement generic EFI zboot")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT
section") neglected to adjust the sizes of the .data section when
CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is
incorrect and some tools complain about it. E.g. 'sbsign' reports:
# sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi
warning: file-aligned section .data extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Note, '__data_size' is also used in the PE optional header and it is not
entirely clear whether .sbat needs to be accounted as part of
SizeOfInitializedData or not. As the header seems to be unused by the real
world firmware, keeping the field equal to __data_size.
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Older versions of `ld` don't seem to support preprocessor directives in
linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with:
ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression
ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error
We don't seem to need these '#ifdef', no empty .sbat section is created
when CONFIG_EFI_SBAT_FILE="":
# objdump -h arch/arm64/boot/vmlinuz.efi
arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2
CONTENTS, ALLOC, LOAD, DATA
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
1, Adjust the 'make install' operation;
2, Support SCHED_MC (Multi-core scheduler);
3, Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS;
4, Enable HAVE_ARCH_STACKLEAK;
5, Increase max supported CPUs up to 2048;
6, Introduce the numa_memblks conversion;
7, Add PWM controller nodes in dts;
8, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmhEEh8WHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImenIIEACT43zpQD6lApWZ8tk8dVYXK6Lb
pKqXLIhAe9g9cSDC6QfwUTwOjv5RZxJBXgKkQfYSSd3ZEZ6hQIqb2JVYMMpNy6WA
I5fJ75pr/E6RMtueg5laYxJ/zLJMM5F2qK/Moff7JGeUuDU5BJEG0R7j7KEhtgo0
5Cm+ktS7waJhNuJposa/Eay6IDWH9Of2UoNboPWmMfLvuZbIp9f1HpjwpZF6xnZ/
xeIhVOcJw8Xft/0xrcx1xZt/nYnJflNwLgaa7/CGa2q1X7yxVarfMUcY63x6cZXX
7jLppejqptPqixf+JFRGKBr8Y82Vu/1TW7XlKaywKrjHPZ/FXJsU682x6SQy2uac
nOiu38qCc5DA9pKB57zxL/5DqTn+yAPGpnC//HvF9/koWCOI6lA5bYzSbBwmkpm7
DS7mVKtfPTicUs5fZ7DsHRjXuyqs6i1+s7wNaTkgG4Y/gBNAffHa36ON5jM5Wzzz
WJGcMEIG0Or6tt/yUVrzY390aYzIOkyAoWJgUQ+tPCXecyjnor9i5P3ZC66dIm2r
UTbC7mX4+bBa/MA1xKKMmCHdJtMzO2A+tduZRf/lO8iYs4c6IJBBaXhW9xHxf8tT
Av/sXnShJWsrRW40g6Kp85ghDcLBS6SLBm5Ux5OLd2byWIeeF/R2BHdF6qb4V3j6
Y2ZHk1ewvLgB0BQ/ww==
=FH8x
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
These objects are built as prerequisites of %.stub.o files.
There is no need to use extra-y, which is planned for deprecation.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add support for emitting a .sbat section into the EFI zboot image, so
that downstreams can easily include revocation metadata in the signed
EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when failing
to map it
- A kerneldoc fix for the EFI stub code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaDHdgwAKCRAwbglWLn0t
XBqgAQDXm8RQQfY4E1ibSVn0zQKwdIM57uU+7vp+HMCJ88oNhwEAkndCq0rMv9qp
aVOR/HWUzAZRUonPyftXiwXImze3lgY=
=sj5+
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot going on in the EFI tree this cycle. The only thing that
stands out is the new support for SBAT metadata, which was a bit
contentious when it was first proposed, because in the initial
incarnation, it would have required us to maintain a revocation index,
and bump it each time a vulnerability affecting UEFI secure boot got
fixed. This was shot down for obvious reasons.
This time, only the changes needed to emit the SBAT section into the
PE/COFF image are being carried upstream, and it is up to the distros
to decide what to put in there when creating and signing the build.
This only has the EFI zboot bits (which the distros will be using for
arm64); the x86 bzImage changes should be arriving next cycle,
presumably via the -tip tree.
Summary:
- Add support for emitting a .sbat section into the EFI zboot image,
so that downstreams can easily include revocation metadata in the
signed EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when
failing to map it
- A kerneldoc fix for the EFI stub code"
* tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
include: pe.h: Fix PE definitions
efi/efi_test: Fix missing pending status update in getwakeuptime
efi: zboot specific mechanism for embedding SBAT section
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
efi: Improve logging around memmap init
Add support for the stackleak feature. It initializes the stack with the
poison value before returning from system calls which improves the kernel
security.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on Loongson-3A5000 (enable GCC_PLUGIN_STACKLEAK and LKDTM):
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
# dmesg
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: stackleak stack usage:
high offset: 320 bytes
current: 448 bytes
lowest: 1264 bytes
tracked: 1264 bytes
untracked: 208 bytes
poisoned: 14528 bytes
low offset: 64 bytes
lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
SBAT is a mechanism which improves SecureBoot revocations of UEFI binaries
by introducing a generation-based technique. Compromised or vulnerable UEFI
binaries can be prevented from booting by bumping the minimal required
generation for the specific component in the bootloader. More information
on the SBAT can be obtained here:
https://github.com/rhboot/shim/blob/main/SBAT.md
Upstream Linux kernel does not currently participate in any way in SBAT as
there's no existing policy in how SBAT generation number should be
defined. Keep the status quo and provide a mechanism for distro vendors and
anyone else who signs their kernel for SecureBoot to include their own SBAT
data. This leaves the decision on the policy to the vendor. Basically, each
distro implementing SecureBoot today, will have an option to inject their
own SBAT data during kernel build and before it gets signed by their
SecureBoot CA. Different distro do not need to agree on the common SBAT
component names or generation numbers as each distro ships its own 'shim'
with their own 'vendor_cert'/'vendor_db'
Implement support for embedding SBAT data for architectures using
zboot (arm64, loongarch, riscv). Put '.sbat' section in between '.data' and
'.text' as the former also covers '.bss' and thus must be the last one.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Both Intel and AMD CPUs support 5-level paging, which is expected to
become more widely adopted in the future. All major x86 Linux
distributions have the feature enabled.
Remove CONFIG_X86_5LEVEL and related #ifdeffery for it to make it more readable.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-4-kirill.shutemov@linux.intel.com
The function efi_load_initrd() had a documentation warning due to
the missing description for the 'out' parameter. Add the parameter
description to the kernel-doc comment to resolve the warning and
improve API documentation.
Fixes the following compiler warning:
drivers/firmware/efi/libstub/efi-stub-helper.c:611: warning: Function parameter or struct member 'out' not described in 'efi_load_initrd'
Fixes: f4dc7fffa9 ("efi: libstub: unify initrd loading between architectures")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus expressed a strong preference for arch-specific asm code (i.e.,
virtually all of it) to reside under arch/ rather than anywhere else.
So move the EFI mixed mode startup code back, and put it under
arch/x86/boot/startup/ where all shared x86 startup code is going to
live.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-11-ardb+git@google.com
- Decouple mixed mode startup code from the traditional x86 decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ9vAPwAKCRAwbglWLn0t
XNsFAQCq4zXmbHnFl8gR3rq06f2gR3DKPfUBGVnyfaP/77ag0AD6Alzm4Pg014cL
GsZPQf38uGnygMTGYsU1HdE8EugFFQY=
=UXC0
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
Remove EFI zboot's dependency on the decompression wrappers used by the
legacy decompressor boot code, which can only process the input in one
go, and this will not work for upcoming support for embedded ELF images.
They also do some odd things like providing a barebones malloc()
implementation, which is not needed in a hosted environment such as the
EFI boot services.
So instead, implement GZIP deflate and ZSTD decompression in terms of
the underlying libraries. Support for other compression algoritms has
already been dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.
When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.
So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.
Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Given that memset/memcpy are intrinsics, the compiler might insert calls
to these routines unexpectedly, including in code that executes after
ExitBootServices(). In this case, the respective boot services are no
longer accessible, and calling them will cause a crash.
So fall back to a bytewise copy/store if this happens to occur, even
though no such occurrences are known to exist in the kernel currently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI mixed mode code has been decoupled from the legacy decompressor,
in order to be able to reuse it with generic EFI zboot images for x86.
Move the source file into the libstub source directory to facilitate
this.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The difference between the PE and handover entrypoints in the EFI stub
is that the former allocates a struct boot_params whereas the latter
expects one from the caller. Currently, these are two completely
separate entrypoints, duplicating some logic and both relying of
efi_exit() to return straight back to the firmware on an error.
Simplify this by making the PE entrypoint call the handover entrypoint
with NULL as the argument for the struct boot_params parameter. This
makes the code easier to follow, and removes the need to support two
different calling conventions in the mixed mode asm code.
While at it, move the assignment of boot_params_ptr into the function
that actually calls into the legacy decompressor, which is where its
value is required.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Annotate some local buffer allocations as __free(efi_pool) and simplify
the associated error handling accordingly. This removes a couple of
gotos and simplifies the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub may obtain the memory map from the firmware numerous times,
and this involves doing a EFI pool allocation first, which needs to be
freed after use.
Streamline this using a cleanup helper, which makes the code easier to
follow.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use LocateHandleBuffer() and a __free() cleanup helper to simplify the
PCI I/O handle buffer traversal code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub implements various ways of setting the resolution of the
EFI framebuffer at boot, and this duplicates a lot of boilerplate for
iterating over the supported modes and extracting the resolution and
color depth.
Refactor this into a single helper that takes a callback, and use it for
the 'auto', 'list' and 'res' selection methods.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the LocateHandleBuffer() API and a __free() function to simplify the
logic that allocates a handle buffer to iterate over all GOP protocols
in the EFI database.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tweak the for_each_efi_handle() macro in order to avoid the need on the
part of the caller to provide a loop counter variable.
Also move efi_get_handle_num() to the callers, so that each occurrence
can be replaced with the actual number returned by the simplified
LocateHandleBuffer API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Recent platforms require more slack slots than the current value of
EFI_MMAP_NR_SLACK_SLOTS, otherwise they fail to boot. The current
workaround is to append `efi=disable_early_pci_dma` to the kernel's
cmdline. So, bump up EFI_MMAP_NR_SLACK_SLOTS to 32 to allow those
platforms to boot with the aforementioned workaround.
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.
EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:
- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;
- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.
Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When CONFIG_CMDLINE_OVERRIDE or CONFIG_CMDLINE_FORCE are configured, the
command line provided by the boot stack should be ignored, and only the
built-in command line should be taken into account.
Add the required handling of this when dealing with initrd= or dtb=
command line options in the EFI stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
CONFIG_CMDLINE, when set, is supposed to serve either as a fallback when
no command line is provided by the bootloader, or to be taken into account
unconditionally, depending on the configured options.
The initrd and dtb loader ignores CONFIG_CMDLINE in either case, and
only takes the EFI firmware provided load options into account. This
means that configuring the kernel with initrd= or dtb= on the built-in
command line does not produce the expected result.
Fix this by doing a separate pass over the built-in command line when
dealing with initrd= or dtb= options.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When CONFIG_CMDLINE_EXTEND is set, the core kernel command line handling
logic appends CONFIG_CMDLINE to the bootloader provided command line.
The EFI stub does the opposite, and parses the builtin one first.
The usual behavior of command line options is that the last one takes
precedence if it appears multiple times, unless there is a meaningful
way to combine them. In either case, parsing the builtin command line
first while the core kernel does it in the opposite order is likely to
produce inconsistent results in such cases.
Therefore, switch the order in the stub to match the core kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.
cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool().
Fixes: 42c8ea3dca ("efi: libstub: Factor out EFI stub entrypoint ...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Current code fails to check for an error case when reading events
from final event log to calculate offsets. Check the error case,
and break early because all subsequent calls will also fail.
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
__calc_tpm2_event_size returns 0 or a positive length, but return values
are often interpreted as ints. Convert everything over to u32 to avoid
signed/unsigned logic errors.
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently the initrd is only measured if it can be loaded using the
INITRD_MEDIA_GUID, if we are loading it from a path provided via the
command line it is never measured. Lets move the check down a couple
lines so the measurement happens independent of the source.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi_convert_cmdline() always sets cmdline_size to at least 1 on success,
so the "cmdline_size > 0" does nothing and can be removed (the intent
was to avoid parsing an empty string, but there is nothing wrong with
parsing an empty string, it is only making boot negligibly slower).
Then the cmd_line_len argument to efi_convert_cmdline can be removed
because there is nothing left using it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi_convert_cmdline() always returns a size of at least 1 because it
counts the NUL terminator, so the "cmdline_size == 0" condition is never
satisfied.
Change it to check if the string starts with a NUL character to get the
intended behavior: to use CONFIG_CMDLINE when load_options_size == 0.
Fixes: 60f38de7a8 ("efi/libstub: Unify command line param parsing")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
- Prevent kexec from crashing on a corrupted TPM log by using a memory
type that is reserved by default
- Log correctable errors reported via CPER
- A couple of cosmetic fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZvVoMgAKCRAwbglWLn0t
XLMLAP4gov3sDh6kIgDe5dxNghVl1EZURgyt/KViRDNyxZmAQQD+I1bgkiczO8bh
+S6AXE4rCZNLE/3JtxJGtfSI0et51AQ=
=2NGd
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot happening in EFI land this cycle.
- Prevent kexec from crashing on a corrupted TPM log by using a
memory type that is reserved by default
- Log correctable errors reported via CPER
- A couple of cosmetic fixes"
* tag 'efi-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Remove redundant null pointer checks in efi_debugfs_init()
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
efi/cper: Print correctable AER information
efi: Remove unused declaration efi_initialize_iomem_resources()
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Make accept_memory() and range_contains_unaccepted_memory() take 'start'
and 'size' arguments instead of 'start' and 'end'.
Remove accept_page(), replacing it with direct calls to accept_memory().
The accept_page() name is going to be used for a different function.
Link: https://lkml.kernel.org/r/20240809114854.3745464-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
-----BEGIN PGP SIGNATURE-----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=8sd2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
* The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
* Support for HAVE_ARCH_STACKLEAK.
* The sv39 linear map has been extended to support 128GiB mappings.
* The frequency of the mtime CSR is now visible via hwprobe.
-----BEGIN PGP SIGNATURE-----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=zeUn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
